ZXR10-MLD-SNOOPING-MIB

All MIBs › ZXR10-MLD-SNOOPING-MIB

Organization: ZTE Corporation

Last Updated: 2014-06-16

Category: ZTE ZXR10 Multicast

Description: Manages ZTE ZXR10 MLD snooping for IPv6 multicast group membership control on Layer 2 switch domains.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MLD-SNOOPING-MIB?

ZXR10-MLD-SNOOPING-MIB is a ZTE proprietary MIB for the ZXR10 switch series implementing Multicast Listener Discovery (MLD) snooping, the IPv6 analog of IGMP snooping, which allows a Layer 2 switch to selectively forward IPv6 multicast traffic only to ports with active listeners. It is expected to expose configuration for enabling/disabling MLD snooping per VLAN and status/statistics on learned multicast group memberships per port, based on its short description. This makes it fundamentally a Layer 2 multicast forwarding-state monitoring MIB: tracking which ports have active IPv6 multicast group memberships helps an operator confirm multicast traffic (e.g., IPTV) is being efficiently forwarded only to interested receivers and not flooded across the VLAN. No module description text or sample objects were available to confirm exact table names, so this remains based on the MIB's stated scope; it conceptually implements the IETF MLD snooping model related to RFC 4541. It is deployed on ZTE ZXR10 Layer 2/Layer 3 switches in networks carrying IPv6 multicast services such as IPTV or video distribution, and network engineers can download the ZXR10-MLD-SNOOPING-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MLD-SNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 switch

Monitoring Examples

No sample objects were captured for this module, so specific table names cannot be cited; typically an operator would check per-VLAN MLD snooping enable status and per-port multicast group membership tables to confirm IPv6 multicast traffic is being properly pruned to only the ports with active listeners, investigating unexpected flooding as a sign of an MLD snooping misconfiguration, but this could not be confirmed from the available data.

What Can Be Monitored

MLD snooping enable status (unconfirmed, no sample objects available)
multicast group membership per port (unconfirmed)

Imported Objects

From IPV6-TC

Ipv6Address

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

From ZXR10-SMI

zxr10

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10switch	1.3.6.1.4.1.3902.3.102
zxr10MldSnoopingMIB	1.3.6.1.4.1.3902.3.102.54			The MIB module to describe the MLD Snooping protocol.
zxr10MldSnoopingGlobalObjects	1.3.6.1.4.1.3902.3.102.54.1
INT zxmlsGlobalEnable	1.3.6.1.4.1.3902.3.102.54.1.1	INTEGER	read-write	Enable/disable MLD snooping in this device.
INT zxmlsGlobalQuery	1.3.6.1.4.1.3902.3.102.54.1.2	INTEGER	read-write	Enable/disable MLD snooping Queries in this device.
I32 zxmlsQueryInterval	1.3.6.1.4.1.3902.3.102.54.1.3	Integer32	read-write	The Query Interval is the interval between General Queries sent by the Querier. Default: 125 seconds.
I32 zxmlsQueryResponseInterval	1.3.6.1.4.1.3902.3.102.54.1.4	Integer32	read-write	The Max Response Time inserted into the periodic General Queries. Default: 100 ticks (1 tick = 100ms).
zxr10MldSnoopingObjects	1.3.6.1.4.1.3902.3.102.54.2
zxmlsInstanceObjects	1.3.6.1.4.1.3902.3.102.54.2.1
zxmlsinsTable	1.3.6.1.4.1.3902.3.102.54.2.1.1		not-accessible	MLD snooping instance configuration table, supports instances such as : VLAN and VPLS.
zxmlsinsEntry	1.3.6.1.4.1.3902.3.102.54.2.1.1.1		not-accessible	MLD snooping instance entry. When instance type is VLAN, index is {type, idx, 0}. When instance type is VPLS, index is {type, 0, VPN name}.
INS zxmlsinsType	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.1	InstanceType	not-accessible	Instance type, 1 is VLAN, 3 is VPLS.
I32 zxmlsinsIdx	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.2	Integer32	not-accessible	Instance ID of VLAN, if instance is VLAN, it is VLAN ID, it is 0 for other instances.
STR zxmlsinsName	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.3	DisplayString	not-accessible	Name specified for each configured instance, only valid when instance type is VPLS.
INT zxmlsinsEnable	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.4	INTEGER	read-create	Enable/disable MLD snooping in this instance.
INT zxmlsinsFastLeave	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.5	INTEGER	read-create	Enable/disable group membership fast leave.
I32 zxmlsinsLastMemQryInterval	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.6	Integer32	read-create	The Last Member Query Interval is the Max Response Time inserted into Multicast-Address-Specific Queries sent in response to Done messages, and is also the amount of time between Multicast-Address-Specific Query messages. Its minimum value and default value both are 1 second, maximum value depends on the product.
I32 zxmlsinsMaxGroupNum	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.7	Integer32	read-create	Max number of multicast group can access in this instance. Its minimum value is 1, maximum value depends on the product.
I32 zxmlsinsHostTimeOut	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.8	Integer32	read-create	Host aging-time. Default: 260 seconds.
I32 zxmlsinsMrouterTimeOut	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.9	Integer32	read-create	Multicast router port aging-time. Default: 260 seconds.
INT zxmlsinsQueryEnable	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.10	INTEGER	read-create	Enable/disable Querier in this instance.
INT zxmlsinsQueryVersion	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.11	INTEGER	read-create	Querier version: V1 or V2.
INT zxmlsinsWorkMode	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.12	INTEGER	read-create	Work mode: Proxy, Transparent or Router.
STR zxmlsinsAclName	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.13	DisplayString	read-create	ACL name of this instance.
ROW zxmlsinsRowStatus	1.3.6.1.4.1.3902.3.102.54.2.1.1.1.100	RowStatus	read-create	The status of this row, support 'createAndGo' and 'destroy' for set operation.
zxmlsGroupObjects	1.3.6.1.4.1.3902.3.102.54.2.2
zxmlsGroupTable	1.3.6.1.4.1.3902.3.102.54.2.2.1		not-accessible	MLD snooping group table.
zxmlsGroupEntry	1.3.6.1.4.1.3902.3.102.54.2.2.1.1		not-accessible	MLD snooping group entry. When opertation is set, zxmlsGroupSourceIp should be 0, zxmlsGroupInstanceType should be VLAN or VPLS. When instance type is VLAN or IP-GLOBAL, zxmlsGroupInstanceName should be 0. When instance type is VPLS, VBUI or VRF, zxmlsGroupInstanceIdx should be 0.
INS zxmlsGroupInstanceType	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.1	InstanceType	not-accessible	Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.
I32 zxmlsGroupInstanceIdx	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.2	Integer32	not-accessible	Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.
STR zxmlsGroupInstanceName	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.3	DisplayString	not-accessible	Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.
ADR zxmlsGroupIp	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.4	Ipv6Address	not-accessible	MLD snooping Group IPv6 Addr.
ADR zxmlsGroupSourceIp	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.5	Ipv6Address	not-accessible	MLD snooping Source IPv6 Addr.
INT zxmlsGroupDropEnable	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.6	INTEGER	read-create	Enable/disable drop mode of this group. When it is enabled, the mulitcast flow will be dropped if there is no host in this group.
I32 zxmlsGroupMaxHostNum	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.7	Integer32	read-create	Max number of MLD snooping host can access to this group. Its minimum value is 1, maximum value depends on the product.
I32 zxmlsGroupHostNum	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.8	Integer32	read-only	Number of MLD snooping host access to this group currently.
MAC zxmlsGroupMac	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.9	MacAddress	read-only	Group MAC address.
ROW zxmlsGroupRowStatus	1.3.6.1.4.1.3902.3.102.54.2.2.1.1.100	RowStatus	read-create	The status of this row, by which new group entries with dropEnable or maxHostNum may be created, or old group entries with dropEnable or maxHostNum deleted from this table. Support 'createAndGo' and 'destroy' for set operation.
zxmlsHostObjects	1.3.6.1.4.1.3902.3.102.54.2.3
zxmlsHostTable	1.3.6.1.4.1.3902.3.102.54.2.3.1		not-accessible	MLD snooping host table.
zxmlsHostEntry	1.3.6.1.4.1.3902.3.102.54.2.3.1.1		not-accessible	MLD snooping host entry. When operation is set, zxmlsHostSourceIp should be 0, zxmlsHostInstanceType should be VLAN or VPLS. When instance type is VLAN or IP-GLOBAL, zxmlsHostInstanceName should be 0. When instance type is VPLS, VBUI or VRF, zxmlsHostInstanceIdx should be 0.
INS zxmlsHostInstanceType	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.1	InstanceType	not-accessible	Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.
I32 zxmlsHostInstanceIdx	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.2	Integer32	not-accessible	Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.
STR zxmlsHostInstanceName	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.3	DisplayString	not-accessible	Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.
ADR zxmlsHostGroupIp	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.4	Ipv6Address	not-accessible	MLD snooping host IPv6 Addr.
ADR zxmlsHostSourceIp	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.5	Ipv6Address	not-accessible	MLD snooping host source IPv6 Addr.
STR zxmlsHostIfName	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.6	DisplayString	not-accessible	Interface name.
I32 zxmlsHostUserId	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.7	Integer32	not-accessible	For IPTV or SUPERVLAN hosts, it's user VLAN. For M-VPLS hosts, it's user VPLS. For VPLS hosts,it's 0. For IP-Global or VRF hosts, it's a computed value, the high 16 bits is internal VLAN, and the low 16 bits is external VLAN. Otherwise, it's equal to instance ID.
STR zxmlsHostPhyName	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.8	DisplayString	not-accessible	Physical Interface name.
INT zxmlsHostStaticOrDynamic	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.9	INTEGER	read-only	Mode of this host. It is dynamic if learned from MLD Report, or is static if configured.
INT zxmlsHostFilterMode	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.10	INTEGER	read-only	Filter mode of this host.
ROW zxmlsHostRowStatus	1.3.6.1.4.1.3902.3.102.54.2.3.1.1.100	RowStatus	read-create	The status of this row, by which new static host entries may be created, or old static host entries deleted from this table. Support 'createAndGo' and 'destroy' for set operation.
zxmlsMrouterObjects	1.3.6.1.4.1.3902.3.102.54.2.4
zxmlsMrTable	1.3.6.1.4.1.3902.3.102.54.2.4.1		not-accessible	MLD snooping multicast router port table.
zxmlsMrEntry	1.3.6.1.4.1.3902.3.102.54.2.4.1.1		not-accessible	MLD snooping multicast router port entry. When operation is set, zxmlsMrInstanceType should be VLAN or VPLS. When instance type is VLAN or IP-GLOBAL, zxmlsMrInstanceName should be 0. When instance type is VPLS, VBUI or VRF, zxmlsMrInstanceIdx should be 0.
INS zxmlsMrInstanceType	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.1	InstanceType	not-accessible	Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.
I32 zxmlsMrInstanceIdx	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.2	Integer32	not-accessible	Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.
STR zxmlsMrInstanceName	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.3	DisplayString	not-accessible	Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.
STR zxmlsMrIfName	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.4	DisplayString	not-accessible	Interface name.
INT zxmlsMrStaticOrDynamic	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.5	INTEGER	read-only	Mode of this multicast router port. It is dynamic if learned from MLD Query, or is static if configured.
INT zxmlsMrVersion	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.6	INTEGER	read-only	Version of this multicast router port.
ROW zxmlsMrRowStatus	1.3.6.1.4.1.3902.3.102.54.2.4.1.1.100	RowStatus	read-create	The status of this row, by which new static multicast router port entries may be created, or old static multicast router port entries deleted from this table. Support 'createAndGo' and 'destroy' for set operation.
zxmlsSummaryObjects	1.3.6.1.4.1.3902.3.102.54.2.5
zxmlsSummaryGlobalObjects	1.3.6.1.4.1.3902.3.102.54.2.5.1
U32 zxmlssGlobalTotalGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.1	Unsigned32	read-only	Number of multicast group access currently.
U32 zxmlssGlobalExistHostGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.2	Unsigned32	read-only	Number of multicast group which exist MLD host.
U32 zxmlssGlobalDropGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.3	Unsigned32	read-only	Number of multicast group which configured as drop mode.
U32 zxmlssGlobalPrejoinGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.4	Unsigned32	read-only	Number of multicast group which configured as prejoin mode.
U32 zxmlssGlobalMaxHostGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.5	Unsigned32	read-only	Number of multicast group which configured with max host number.
U32 zxmlssGlobalSSMGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.6	Unsigned32	read-only	Number of source-specific multicast group access currently.
U32 zxmlssGlobalASMGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.7	Unsigned32	read-only	Number of anycast-specific multicast group access currently.
U32 zxmlssGlobalTotalHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.8	Unsigned32	read-only	Number of host access currently.
U32 zxmlssGlobalDynamicHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.9	Unsigned32	read-only	Number of dynamic host access currently.
U32 zxmlssGlobalStaticHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.10	Unsigned32	read-only	Number of static host access currently.
U32 zxmlssGlobalTotalMrouterNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.11	Unsigned32	read-only	Number of multicast router port access currently.
U32 zxmlssGlobalDynamicMrouterNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.12	Unsigned32	read-only	Number of dynamic multicast router port access currently.
U32 zxmlssGlobalStaticMrouterNum	1.3.6.1.4.1.3902.3.102.54.2.5.1.13	Unsigned32	read-only	Number of static multicast router port access currently.
zxmlsSummaryInstanceObjects	1.3.6.1.4.1.3902.3.102.54.2.5.2
zxmlssInstanceTable	1.3.6.1.4.1.3902.3.102.54.2.5.2.1		not-accessible	MLD snooping instance summary table, MLD snooping supports instances such as : VLAN, Service, VPLS, SUPERVLAN, VBUI, IP-GLOBAL and VRF. Some instances are not supported now, but reserved for compatibility.
zxmlssInstanceEntry	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1		not-accessible	MLD snooping instance summary entry.
INS zxmlssInstanceType	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.1	InstanceType	not-accessible	Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.
I32 zxmlssInstanceIdx	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.2	Integer32	not-accessible	Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.
STR zxmlssInstanceName	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.3	DisplayString	not-accessible	Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.
U32 zxmlssInstanceTotalGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.4	Unsigned32	read-only	Number of multicast group access to this instance currently.
U32 zxmlssInstanceExistHostGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.5	Unsigned32	read-only	Number of multicast group which exist MLD host.
U32 zxmlssInstanceDropGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.6	Unsigned32	read-only	Number of multicast group which configured as drop mode.
U32 zxmlssInstancePrejoinGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.7	Unsigned32	read-only	Number of multicast group which configured as prejoin mode.
U32 zxmlssInstanceMaxHostGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.8	Unsigned32	read-only	Number of multicast group which configured with max host number.
U32 zxmlssInstanceSSMGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.9	Unsigned32	read-only	Number of source-specific multicast group access currently.
U32 zxmlssInstanceASMGroupNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.10	Unsigned32	read-only	Number of anycast-specific multicast group access to this instance currently.
U32 zxmlssInstanceTotalHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.11	Unsigned32	read-only	Number of host access to this instance currently.
U32 zxmlssInstanceDynamicHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.12	Unsigned32	read-only	Number of dynamic host access to this instance currently.
U32 zxmlssInstanceStaticHostNum	1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.13	Unsigned32	read-only	Number of static host access to this instance currently.

RFC description

Configures and monitors MLD snooping for IPv6 multicast group management on ZTE/ZXR10 devices.

Start monitoring ZTE ZXR10 switch (MLD IPv6-multicast-snooping per-VLAN membership status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MLD-SNOOPING-MIB

What Is ZXR10-MLD-SNOOPING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description