ZXR10-VXLAN-MIB

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ZXR10-VXLAN-MIB

Organization: ZTE Corporation

Last Updated: 2016-08-16

Category: ZTE ZXR10 Overlay and Virtualization

Description: Manages ZTE ZXR10 VXLAN overlay network configuration including VNI mapping, tunnel endpoints, and flood tables.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-VXLAN-MIB?

ZXR10-VXLAN-MIB is a ZTE enterprise MIB for the ZXR10 switch/router platform, defining objects to describe VXLAN (Virtual Extensible LAN) overlay network state, including VNI (VXLAN Network Identifier) to VLAN mappings, VTEP (tunnel endpoint) configuration, and flood/broadcast tables used for BUM traffic replication. No sample objects were extracted from this excerpt, but based on its stated purpose the module would expose tables describing configured VNIs, associated tunnel endpoints, and flood-list membership rather than classic hardware sensors. Its monitoring relevance would center on overlay network configuration and forwarding-state status, letting an operator confirm a given VNI is correctly mapped to its intended VLAN and that tunnel endpoints and flood entries are populated as expected, which is essential to diagnosing overlay reachability problems in a VXLAN fabric. It builds on ZTE's ZXR10 platform MIB conventions and conceptually parallels the IETF VXLAN/EVPN data models without being a direct IETF MIB itself. It is typically deployed on ZTE ZXR10 data center switches acting as VTEPs in a VXLAN overlay fabric. Engineers can download the ZXR10-VXLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-VXLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • ZTE ZXR10 data center switches/routers acting as VXLAN VTEPs

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited, but based on its stated purpose an administrator would expect to poll a VNI-to-VLAN mapping table and a VTEP/tunnel endpoint table to confirm overlay segments are correctly provisioned, and a flood-table to verify BUM traffic replication lists are populated for each VNI on a ZXR10 switch.

Imported Objects

From IPV6-TC

Ipv6Address

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

From ZXR10-SMI

zxr10RosngMIBOBJECT-IDENTITY
OIDs

RFC description

Manages VXLAN (Virtual Extensible LAN) overlay network configuration and VTEP (VXLAN Tunnel Endpoint) tables on ZXR10 routers.

Start monitoring ZTE ZXR10 data center switches/routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-VXLAN-MIB