ZTE-AN-CHASSIS-MIB

All MIBs › ZTE-AN-CHASSIS-MIB

Organization: ZTE Corporation

Last Updated: 2014-05-22

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node chassis hardware including slots, cards, power supplies, and fan status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-CHASSIS-MIB?

ZTE-AN-CHASSIS-MIB is a ZTE enterprise MIB for the physical chassis of ZTE Access Node platforms, used in broadband access equipment such as DSLAM/OLT-class devices. It exposes hardware inventory and status data for the chassis, including slots, cards, power supplies, and fans. Its central use is monitoring hardware health: it lets an administrator confirm that a card is present and functioning in its slot, and specifically check power supply and fan operational status, which are classic indicators of physical equipment failure risk (overheating, power loss) in access node deployments. As a vendor chassis MIB it likely parallels or extends the IETF ENTITY-MIB physical entity model for ZTE-specific hardware. It is typically deployed on ZTE Access Node chassis in telecom or ISP access networks where remote hardware health visibility reduces the need for site visits. Engineers can download the ZTE-AN-CHASSIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-CHASSIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Access Node chassis (DSLAM/OLT-class access equipment)

Monitoring Examples

No object/table names were supplied for this module, so a concrete polling example cannot be grounded in real identifiers; in general terms, an operator would poll per-slot/per-card presence and status objects together with power supply and fan status objects to detect a failed or missing card, a lost power feed, or a stopped fan before it leads to a chassis-wide outage.

What Can Be Monitored

slot/card presence and status
power supply status
fan status
chassis hardware inventory

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

From ZTE-AN-SMI

zxAccessNode	MODULE-IDENTITY
zxAnEquipment	OBJECT-IDENTITY

From ZTE-AN-SOFTWARE-MIB

zxAnSwCardVersion

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT zxAnCardAccessoriesOperStatus	1.3.6.1.4.1.3902.1082.10.1.2.4.1.17	INTEGER	read-only	The operational status of the card accessories.
STR zxAnCardAccessoriesType	1.3.6.1.4.1.3902.1082.10.1.2.4.1.16	DisplayString	read-only	The accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's splitter.
I32 zxAnCardActivePortNums	1.3.6.1.4.1.3902.1082.10.1.2.4.1.8	Integer32	read-only	The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0.
I32 zxAnCardActualMainType	1.3.6.1.4.1.3902.1082.10.1.2.4.1.3	Integer32	read-only	The actually main card type on the slot.
STR zxAnCardActualType	1.3.6.1.4.1.3902.1082.10.1.2.4.1.4	DisplayString	read-only	The actually card type on the slot. Card type indicates the type of detailed hardware,such as ATUGA and ATUGB, they'er all 32-ports Adsl card and they all provide general Adsl service,but they have different chips. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters.
INT zxAnCardAdminStatus	1.3.6.1.4.1.3902.1082.10.1.2.4.1.6	INTEGER	read-create	This MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly.
I32 zxAnCardAvailableStorageSize	1.3.6.1.4.1.3902.1082.10.1.2.4.1.21	Integer32	read-only	The available storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes.
INT zxAnCardBladeAdminStatus	1.3.6.1.4.1.3902.1082.10.1.2.8.1.1	INTEGER	read-write	The administrative status of the card blade.
zxAnCardBladeEntry	1.3.6.1.4.1.3902.1082.10.1.2.8.1		not-accessible	An entry in zxAnCardBladeTable.
IP zxAnCardBladeIpv4Address	1.3.6.1.4.1.3902.1082.10.1.2.8.1.3	IpAddress	read-write	The IPv4 address of the card blade.
IP zxAnCardBladeIpv4AddrGateway	1.3.6.1.4.1.3902.1082.10.1.2.8.1.5	IpAddress	read-write	The IPv4 gateway of the card blade.
IP zxAnCardBladeIpv4AddrSubnetMask	1.3.6.1.4.1.3902.1082.10.1.2.8.1.4	IpAddress	read-write	The IPv4 address subnet mask of the card blade.
IP zxAnCardBladeIpv6Address	1.3.6.1.4.1.3902.1082.10.1.2.8.1.6	InetAddress	read-write	The IPv6 address of the card blade.
IP zxAnCardBladeIpv6AddrGateway	1.3.6.1.4.1.3902.1082.10.1.2.8.1.8	InetAddress	read-write	The IPv6 gateway of the card blade.
ADR zxAnCardBladeIpv6AddrPfxLen	1.3.6.1.4.1.3902.1082.10.1.2.8.1.7	InetAddressPrefixLength	read-write	The IPv6 address subnet prefix length of the card blade.
INT zxAnCardBladeOperStatus	1.3.6.1.4.1.3902.1082.10.1.2.8.1.2	INTEGER	read-only	The operational status of the card blade.
zxAnCardBladeTable	1.3.6.1.4.1.3902.1082.10.1.2.8		not-accessible	The card blade table.
STR zxAnCardBootwareVersion	1.3.6.1.4.1.3902.1082.10.1.2.4.1.32	DisplayString	read-only	The bootware version in this card.
STR zxAnCardChipsetInfo	1.3.6.1.4.1.3902.1082.10.1.2.4.1.37	DisplayString	read-only	The chipset information of the card. Empty string means the card has no this attribute.
INT zxAnCardChipsetType	1.3.6.1.4.1.3902.1082.10.1.2.4.1.36	INTEGER	read-only	The chipset type of the card.
STR zxAnCardCleiCode	1.3.6.1.4.1.3902.1082.10.1.2.4.1.15	DisplayString	read-only	The CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.
I32 zxAnCardConfMainType	1.3.6.1.4.1.3902.1082.10.1.2.4.1.2	Integer32	read-create	The main card type to config on the slot. Main card type indicates the category of hardware, such as 64-ports adsl card,4-ports ethernet card.
STR zxAnCardCpldVersion	1.3.6.1.4.1.3902.1082.10.1.2.4.1.26	DisplayString	read-only	The CPLD version in this card.
STR zxAnCardCpuInfo	1.3.6.1.4.1.3902.1082.10.1.2.4.1.35	DisplayString	read-only	The CPU information of the card. Empty string means the card has no this attribute.
I32 zxAnCardCpuLoad	1.3.6.1.4.1.3902.1082.10.1.2.4.1.9	Integer32	read-only	The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.
I32 zxAnCardCpuLoadThreshold	1.3.6.1.4.1.3902.1082.10.1.2.4.1.10	Integer32	read-create	The CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm trap should be generated by agent.
INT zxAnCardCpuOverloadReason	1.3.6.1.4.1.3902.1082.10.1.2.4.1.30	INTEGER	accessible-for-notify	The CPU overloading reason. normal(1): value 1 means the CPU load is normal. tooManyNetworkPackets(2): value 2 means that the CPU is busy processing too many network packets. performanceCollectionTasksBusy(3): value 3 means that the CPU is busy processing the performance collection tasks. otherTasksBusy(255): value 255 means that the CPU is busy processing other tasks.
zxAnCardEntry	1.3.6.1.4.1.3902.1082.10.1.2.4.1		not-accessible	An entry in zxAnCardTable.
STR zxAnCardFirmwareVersion	1.3.6.1.4.1.3902.1082.10.1.2.4.1.27	DisplayString	read-only	The firmware version in this card.
STR zxAnCardHardwareVersion	1.3.6.1.4.1.3902.1082.10.1.2.4.1.23	DisplayString	read-only	The hard version in this card.
I32 zxAnCardHisMinCpuLoad	1.3.6.1.4.1.3902.1082.10.1.2.51.1.4	Integer32	read-only	The average CPU load of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0.
DAT zxAnCardHisMinDateTime	1.3.6.1.4.1.3902.1082.10.1.2.51.1.3	DateAndTime	read-only	The 5 minutes or 15 minutes interval performance data generation time.
I32 zxAnCardHisMinIntervalNo	1.3.6.1.4.1.3902.1082.10.1.2.51.1.1	Integer32	not-accessible	The performance data interval number. 1 means the the most recent previous interval; If the performance collection interval is 5 minutes, intervals 2..288 are optional. If the performance collection interval is 15 minutes, intervals 2..96 are optional.
INT zxAnCardHisMinIntervalValidData	1.3.6.1.4.1.3902.1082.10.1.2.51.1.2	INTEGER	read-only	Performance data validity.
I32 zxAnCardHisMinMemUsage	1.3.6.1.4.1.3902.1082.10.1.2.51.1.5	Integer32	read-only	The average memory usage of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0.
zxAnCardHisMinPerfEntry	1.3.6.1.4.1.3902.1082.10.1.2.51.1		not-accessible	The 5 minutes or 15 minutes interval performance data entry of card.
zxAnCardHisMinPerfTable	1.3.6.1.4.1.3902.1082.10.1.2.51		not-accessible	The 5 minutes or 15 minutes interval performance data table of card.
STR zxAnCardInvSn	1.3.6.1.4.1.3902.1082.10.1.2.4.1.14	DisplayString	read-create	The serial number of this card. it is used by inventroy management.
INT zxAnCardLastResetReason	1.3.6.1.4.1.3902.1082.10.1.2.4.1.34	INTEGER	read-only	The card last reset reason.
DAT zxAnCardLastStartupTime	1.3.6.1.4.1.3902.1082.10.1.2.4.1.25	DateAndTime	read-only	The last startup time of the card.
STR zxAnCardMachineId	1.3.6.1.4.1.3902.1082.10.1.2.4.1.43	DisplayString	read-only	The machine ID of the card.
STR zxAnCardManufacturingCode	1.3.6.1.4.1.3902.1082.10.1.2.4.1.29	DisplayString	read-only	The manufacturing code of the card.
STR zxAnCardMcuVersion	1.3.6.1.4.1.3902.1082.10.1.2.4.1.31	DisplayString	read-only	The MCU version in this card.
I32 zxAnCardMemSize	1.3.6.1.4.1.3902.1082.10.1.2.4.1.19	Integer32	read-only	The current memory size of this board. If the board has no this attribute,it should be 0.
I32 zxAnCardMemUsage	1.3.6.1.4.1.3902.1082.10.1.2.4.1.11	Integer32	read-only	The current memory usage of this board. If the board has no this attribute,it should be 0.
I32 zxAnCardMemUsageThreshold	1.3.6.1.4.1.3902.1082.10.1.2.4.1.12	Integer32	read-create	The memory usage threshold of this board. When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm trap should be generated by agent.
STR zxAnCardName	1.3.6.1.4.1.3902.1082.10.1.2.4.1.42	DisplayString	read-only	The name of the card.
STR zxAnCardOperatorCode	1.3.6.1.4.1.3902.1082.10.1.2.4.1.38	DisplayString	read-create	The operator code of the card. Empty string means the attribute of the card is unconfigured.
INT zxAnCardOperStatus	1.3.6.1.4.1.3902.1082.10.1.2.4.1.5	INTEGER	read-only	This MIB is defined for the card status. inService(1) -- card plugged in,running normally and service is being provided normally. notInService(2)-- card plugged in,running normally but service is stopped. hwOnline(3) -- card plugged in and card communication is ok, but software isn't running now. hwOffline(4) -- card is pulled out or card not plugged in, but added to agent's database only. configuring(5) -- card plugged in, but it is configuring. configFailed(6)-- card plugged in, but configuration failed. typeMismatch(7)-- card plugged in, but it's type is mismatch. deactived(8) -- card plugged in, but it is deactivated by a manager. faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance, such as adding card failed. noPower(11) -- power card plugged in, but no power input. unauthorized(12) -- card plugged in, but it's bugsell and the software of the card doesn't run now. It is not supported by C600 series NE. adminDown(13) -- card plugged in, running normally, but the administrative status of the card is deactived. powerSaving(34) -- card plugged in, but it's power saving status.
STR zxAnCardOtherFirmwareVersions	1.3.6.1.4.1.3902.1082.10.1.2.4.1.28	DisplayString	read-only	The other firmware versions in this card.
STR zxAnCardPn	1.3.6.1.4.1.3902.1082.10.1.2.4.1.33	DisplayString	read-only	The part number of the card.
I32 zxAnCardPortNums	1.3.6.1.4.1.3902.1082.10.1.2.4.1.7	Integer32	read-only	The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0.
INT zxAnCardPowerSavingEnable	1.3.6.1.4.1.3902.1082.10.1.2.4.1.24	INTEGER	read-create	Enable or disable the power saving of the card.
I32 zxAnCardResetTimes	1.3.6.1.4.1.3902.1082.10.1.2.4.1.40	Integer32	read-only	The resetting times of the card.
INT zxAnCardResetTimesClear	1.3.6.1.4.1.3902.1082.10.1.2.4.1.41	INTEGER	read-create	Clear the resetting times of the card. When get this variable, always return 1.
ROW zxAnCardRowStatus	1.3.6.1.4.1.3902.1082.10.1.2.4.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnExampleFunc2Xxx1Var1 and zxAnExampleFunc2Xxx1Var2 have been set. To delete a row in this table, a manager must sets this object to destroy(6).
INT zxAnCardStandbyStatus	1.3.6.1.4.1.3902.1082.10.1.2.4.1.13	INTEGER	read-only	The card operation status on the card.
STR zxAnCardSubCardName	1.3.6.1.4.1.3902.1082.10.1.2.4.1.39	DisplayString	read-create	The clock sub card on main board.
zxAnCardTable	1.3.6.1.4.1.3902.1082.10.1.2.4		not-accessible	This table includes the enable or disable plug and play of the Card.
I32 zxAnCardTotalStorageSize	1.3.6.1.4.1.3902.1082.10.1.2.4.1.22	Integer32	read-only	The total storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes.
BIT zxAnChassisCapabilities	1.3.6.1.4.1.3902.1082.10.1.1.100	Bits	read-only	The chassis management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported. mcuVerAndBootVerAndPnSupported(0): value 1 means the following objects are supported: zxAnCardMcuVersion zxAnCardBootwareVersion zxAnCardPn cardLastResetReasonSupported(1): value 1 means zxAnCardLastResetReason is supported cardCpuChipSetInfoSupported(2): value 1 means the following objects are supported: zxAnCardCpuInfo zxAnCardChipsetType zxAnCardChipsetInfo. cardOperatorCodeSupported(3): value 1 means zxAnCardOperatorCode is supported. cardResetTimesClearSupported(4): value 1 means zxAnCardResetTimesClear is supported.
NTF zxAnChassisCardCpuOverloadAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.20			It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThreshhold.
NTF zxAnChassisCardCpuOverloadClr	1.3.6.1.4.1.3902.1082.10.1.3.2.21			It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThreshhold.
NTF zxAnChassisCardMemOverloadAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.22			It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageThreshhold.
NTF zxAnChassisCardMemOverloadClr	1.3.6.1.4.1.3902.1082.10.1.3.2.23			It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageThreshhold.
zxAnChassisCardMgmtGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.4			The collection of objects which are used to represent card information and to manage card.
NTF zxAnChassisCardNotConfiguredAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.7			A zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured.
NTF zxAnChassisCardNotConfiguredClr	1.3.6.1.4.1.3902.1082.10.1.3.2.8			A zxAnChassisCardNotConfiguredClr trap is sent when the agent has detected that the card has plugged in and configured.
NTF zxAnChassisCardNotRunningAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.5			A zxAnChassisCardNotRunningAlm trap is sent when the agent has detected that the card has plugged in and configured, but it is not running.
NTF zxAnChassisCardNotRunningClr	1.3.6.1.4.1.3902.1082.10.1.3.2.6			A zxAnChassisCardNotRunningClr trap is sent when the agent has detected that the card is inservice.
NTF zxAnChassisCardOffline	1.3.6.1.4.1.3902.1082.10.1.3.2.1			A zxAnChassisCardOffline trap is sent when the agent has detected that the configured card has plugged out.
NTF zxAnChassisCardOnline	1.3.6.1.4.1.3902.1082.10.1.3.2.2			A zxAnChassisCardOnline trap is sent when the agent has detected that the configured card has plugged in.
INT zxAnChassisCardResetTimesClear	1.3.6.1.4.1.3902.1082.10.1.1.7	INTEGER	read-write	Clear the resetting times of all cards of the NE. When get this variable, always return 1.
NTF zxAnChassisCardResourceAdded	1.3.6.1.4.1.3902.1082.10.1.3.2.24			A zxAnChassisCardResourceAdded trap is sent when the agent has detected that the card has come into inService status.
NTF zxAnChassisCardResourceDeleted	1.3.6.1.4.1.3902.1082.10.1.3.2.25			A zxAnChassisCardResourceDeleted trap is sent when the agent has detected that the card has been deleted.
NTF zxAnChassisCardRstBtnAbnormalAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.9			A zxAnChassisCardRstBtnAbnormalAlm trap is sent when the agent has detected that the reset button of the card is abnormal.
NTF zxAnChassisCardRstBtnAbnormalClr	1.3.6.1.4.1.3902.1082.10.1.3.2.10			A zxAnChassisCardRstBtnAbnormalClr trap is sent when the agent has detected that the reset button of the card is normal.
zxAnChassisCardTraps	1.3.6.1.4.1.3902.1082.10.1.3.2
zxAnChassisCardTrapsGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.7			The notifications which indicate specific changes, include card status, card cpu load status and memory load status.
NTF zxAnChassisCardTypeMismatchAlm	1.3.6.1.4.1.3902.1082.10.1.3.2.3			A zxAnChassisCardTypeMismatchAlm trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActualType.
NTF zxAnChassisCardTypeMismatchClr	1.3.6.1.4.1.3902.1082.10.1.3.2.4			A zxAnChassisCardTypeMismatchClr trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActualType.
zxAnChassisCompliance	1.3.6.1.4.1.3902.1082.10.1.4.1.1			The compliance statement for SNMP entities which implement the ZTE-AN-CHASSIS-MIB.
zxAnChassisCompliances	1.3.6.1.4.1.3902.1082.10.1.4.1
zxAnChassisConformance	1.3.6.1.4.1.3902.1082.10.1.4
NTF zxAnChassisCtrlCardSwappedAlm	1.3.6.1.4.1.3902.1082.10.1.3.1.2			A zxAnChassisCtrlCardSwappedAlm trap indicates that the main control card has swapped to slave card.
NTF zxAnChassisCtrlCardSwappedClr	1.3.6.1.4.1.3902.1082.10.1.3.1.3			A zxAnChassisCtrlCardSwappedClr trap indicates that the main control card swapped trap has cleared.
zxAnChassisGlobalObjects	1.3.6.1.4.1.3902.1082.10.1.1
zxAnChassisGroups	1.3.6.1.4.1.3902.1082.10.1.4.2
zxAnChassisMib	1.3.6.1.4.1.3902.1082.10.1			This MIB defines zte Access Node chassis managed objects.
zxAnChassisNotifications	1.3.6.1.4.1.3902.1082.10.1.3
zxAnChassisObjects	1.3.6.1.4.1.3902.1082.10.1.2
INT zxAnChassisPnpMode	1.3.6.1.4.1.3902.1082.10.1.1.4	INTEGER	read-write	config Ne card PNP mode,PNP mode means when card on shelf, then this card can use without add it
zxAnChassisRackMgmtGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.2			The collection of objects which are used to represent rack information and to manage rack.
zxAnChassisShelfMgmtGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.3			The collection of objects which are used to represent shelf information and to manage shelf.
zxAnChassisSubCardMgmtGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.5			The collection of objects which are used to represent subcard information and to manage subcard.
INT zxAnChassisSysLastRebootReason	1.3.6.1.4.1.3902.1082.10.1.1.2	INTEGER	read-only	It indicates device coldstart or warmstart reason byCli(1) warmstart by command, byNms(2) warmstart by network management, byWatchdog(3) warmstart by watchdog, byPowerOff(4) coldstart by poweroff, byProcessSuspended(6) warmstart by process suspended, unknown (99) restart by other reason.
INT zxAnChassisSysLastSwapReason	1.3.6.1.4.1.3902.1082.10.1.1.3	INTEGER	read-only	Last swap request,such as force,plug-out or others. forced(1) swap by command or network management, cardOffline(2) swap by the main control board poweroff or pull out, reset(3) swap by the main control board reset self, cardDown(99) swap by other reason.
zxAnChassisSysMgmtGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.1			The notifications which indicate reboot,set-pnp and last reboot or swap reason.
INT zxAnChassisSysReboot	1.3.6.1.4.1.3902.1082.10.1.1.1	INTEGER	read-write	Reboot system.
I32 zxAnChassisSysRebootTimes	1.3.6.1.4.1.3902.1082.10.1.1.5	Integer32	read-only	The system rebooting times
INT zxAnChassisSysRebootTimesClear	1.3.6.1.4.1.3902.1082.10.1.1.6	INTEGER	read-write	Clear the system rebooting times. When get this variable, always return 1.
zxAnChassisSysTraps	1.3.6.1.4.1.3902.1082.10.1.3.1
zxAnChassisSysTrapsGroup	1.3.6.1.4.1.3902.1082.10.1.4.2.6			The notifications which indicate swap information.
I32 zxAnLogicShelfNo	1.3.6.1.4.1.3902.1082.10.1.2.3.1.7	Integer32	read-create	The logic Shelf number
I32 zxAnRack	1.3.6.1.4.1.3902.1082.10.1.2.2.1.1	Integer32	not-accessible	The range of zxAnRack is 1~1 for DT
I32 zxAnRackActualType	1.3.6.1.4.1.3902.1082.10.1.2.2.1.2	Integer32	read-only	This MIB is defined for actual rack type.
I32 zxAnRackConfType	1.3.6.1.4.1.3902.1082.10.1.2.2.1.3	Integer32	read-create	This MIB is defined for configged rack type.
zxAnRackEntry	1.3.6.1.4.1.3902.1082.10.1.2.2.1		not-accessible	An entry in zxAnRackTable. This table is not supported in C6XX.
STR zxAnRackInvSn	1.3.6.1.4.1.3902.1082.10.1.2.2.1.4	DisplayString	read-create	This MIB is defined for serial number of this rack. it is used by inventroy management.
ROW zxAnRackRowStatus	1.3.6.1.4.1.3902.1082.10.1.2.2.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnRackConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).
zxAnRackTable	1.3.6.1.4.1.3902.1082.10.1.2.2		not-accessible	This table includes the enable or disable plug and play of the rack.
I32 zxAnShelf	1.3.6.1.4.1.3902.1082.10.1.2.3.1.1	Integer32	not-accessible	The range of zxAnShelf is 1~1 for DT
I32 zxAnShelfActualType	1.3.6.1.4.1.3902.1082.10.1.2.3.1.3	Integer32	read-only	The actual shelf type.
STR zxAnShelfCleiCode	1.3.6.1.4.1.3902.1082.10.1.2.3.1.6	DisplayString	read-only	The CLEI code of this Shelf. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.
I32 zxAnShelfConfType	1.3.6.1.4.1.3902.1082.10.1.2.3.1.4	Integer32	read-create	The configuration shelf type.
zxAnShelfEntry	1.3.6.1.4.1.3902.1082.10.1.2.3.1		not-accessible	An entry in zxAnShelfTable.
STR zxAnShelfHardwareVersion	1.3.6.1.4.1.3902.1082.10.1.2.3.1.2	DisplayString	read-only	The hard driver on the shelf.
STR zxAnShelfInvSn	1.3.6.1.4.1.3902.1082.10.1.2.3.1.5	DisplayString	read-create	The serial number of this shelf. it is used by inventroy management.
ROW zxAnShelfRowStatus	1.3.6.1.4.1.3902.1082.10.1.2.3.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnShelfConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).
zxAnShelfTable	1.3.6.1.4.1.3902.1082.10.1.2.3		not-accessible	This table includes the enable or disable plug and play of the shelf.
I32 zxAnSlot	1.3.6.1.4.1.3902.1082.10.1.2.4.1.1	Integer32	not-accessible	The range of zxAnSlot is 0~20 for DT IEC-SHELF, and the range of zxAnSlot is 0~22 for DT ETSI-SHELF

RFC description

ZTE Access Node chassis management MIB for monitoring card, rack, and shelf properties in broadband access systems.

Start monitoring ZTE Access Node chassis, DSLAM/OLT-class access equipment (slot/card/power-supply/fan status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-CHASSIS-MIB

What Is ZTE-AN-CHASSIS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description