ZXR10-LACP-MIB

All MIBs › ZXR10-LACP-MIB

Organization: ZTE Corporation

Last Updated: 2016-03-28

Category: ZTE ZXR10 Layer 2 Switching

Description: Manages ZTE ZXR10 LACP aggregation groups, actor and partner state, and port aggregation status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-LACP-MIB?

ZXR10-LACP-MIB implements the Link Aggregation Control Protocol (IEEE 802.3ad) on ZTE's ZXROSng routers/switches, managing link aggregation groups and reporting the actor and partner LACP state of each aggregated member port. It exposes aggregation group membership along with per-port actor/partner state, such as synchronization and collecting/distributing status. It is directly used to monitor the health of link-aggregated trunks -- verifying that all member ports remain correctly bundled and none have fallen out of sync, which would indicate a cabling fault, configuration mismatch, or partner-device problem. It directly implements the IEEE 802.3ad/802.1AX LACP standard and conceptually overlaps with the standard IEEE8023-LAG-MIB. It is typically deployed on ZXR10 switches/routers using link aggregation for increased bandwidth and redundancy between core and aggregation network elements. Network engineers evaluating or troubleshooting this functionality can download the ZXR10-LACP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-LACP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch (ROSng-based)

Monitoring Examples

No specific object names were present in the source, so the following scenario is inferred from module_desc: an operator would poll the per-port LACP actor/partner state table for an aggregation group to confirm all member ports show a synchronized, collecting/distributing state. A port stuck in an unsynchronized state would explain why the aggregate bundle is running at reduced bandwidth or has failed over unevenly across its members.

What Can Be Monitored

link aggregation group membership
per-port LACP actor state
per-port LACP partner state
aggregation synchronization status

Imported Objects

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 lacpAggActorSystemPriority	1.3.6.1.4.1.3902.3.125.1.1.1.1.3	Unsigned32	read-only	LACP System priority.
lacpAggBoundEntry	1.3.6.1.4.1.3902.3.125.1.1.2.1		not-accessible	Each row index by smartgroup port index and aggregated port index.
I32 lacpAggBoundPortIfIndex	1.3.6.1.4.1.3902.3.125.1.1.2.1.2	Integer32	read-only	Aggregated interface index.
I32 lacpAggBoundSgIfIndex	1.3.6.1.4.1.3902.3.125.1.1.2.1.1	Integer32	read-only	Smartgroup interface index.
lacpAggBoundTable	1.3.6.1.4.1.3902.3.125.1.1.2		not-accessible	Aggregating port bound aggregated port.
U32 lacpAggLacpPriority	1.3.6.1.4.1.3902.3.125.1.2.1.1.5	Unsigned32	read-only	Lacp Priority.
LAC lacpAggLoadBalanceMode	1.3.6.1.4.1.3902.3.125.1.1.1.1.5	LACPLoadBalanceType	read-only	Aggregation Load Balance Type.
MAC lacpAggMacAddress	1.3.6.1.4.1.3902.3.125.1.1.1.1.2	MacAddress	read-only	Mac address,the LACP module don't provide the SG interface's MAC !
U32 lacpAggMinimumMember	1.3.6.1.4.1.3902.3.125.1.1.1.1.21	Unsigned32	read-only	Aggregation Minimum Member Num.
LAC lacpAggMode	1.3.6.1.4.1.3902.3.125.1.1.1.1.4	LACPMode	read-only	Aggregation Type.
U32 lacpAggPortActorOperKey	1.3.6.1.4.1.3902.3.125.1.2.1.1.6	Unsigned32	read-only	Lacp Port Operation Key.
U32 lacpAggPortActorOperState	1.3.6.1.4.1.3902.3.125.1.2.1.1.7	Unsigned32	read-only	Lacp Port Operation Status.
I32 lacpAggPortIfIndex	1.3.6.1.4.1.3902.3.125.1.2.1.1.10	Integer32	read-only	Aggregated interface index.
STR lacpAggPortIfName	1.3.6.1.4.1.3902.3.125.1.2.1.1.2	DisplayString	read-only	Aggregated interface name.
LAC lacpAggPortMode	1.3.6.1.4.1.3902.3.125.1.2.1.1.3	LACPPortType	read-only	LACP Port Type.
U32 lacpAggPortPartnerOperKey	1.3.6.1.4.1.3902.3.125.1.2.1.1.8	Unsigned32	read-only	Lacp Partner Operation Key.
U32 lacpAggPortPartnerOperState	1.3.6.1.4.1.3902.3.125.1.2.1.1.9	Unsigned32	read-only	Lacp Partner Operation Status.
LAC lacpAggPortTimeOut	1.3.6.1.4.1.3902.3.125.1.2.1.1.4	LACPPortTimeoutType	read-only	LACP Port Timeout.
lacpAggregatedEntry	1.3.6.1.4.1.3902.3.125.1.2.1.1		not-accessible	Each row index by aggregating and aggregated ifIndex And contain imformation of Aggregated Port.
lacpAggregatedPara	1.3.6.1.4.1.3902.3.125.1.2
lacpAggregatedTable	1.3.6.1.4.1.3902.3.125.1.2.1		not-accessible	Configure Aggregated Port parameters.
lacpAggregatingEntry	1.3.6.1.4.1.3902.3.125.1.1.1.1		not-accessible	Each row index by ifIndex And contain imformation of Aggregating Port.
lacpAggregatingPara	1.3.6.1.4.1.3902.3.125.1.1
lacpAggregatingTable	1.3.6.1.4.1.3902.3.125.1.1.1		not-accessible	Configure Aggregating Port parameters.
U32 lacpAggSgId	1.3.6.1.4.1.3902.3.125.1.2.1.1.1	Unsigned32	read-only	Add to smartgroup interface.
I32 lacpAggSgIfIndex	1.3.6.1.4.1.3902.3.125.1.1.1.1.30	Integer32	read-only	Aggregation Minimum Member Num.
STR lacpAggSgIfName	1.3.6.1.4.1.3902.3.125.1.1.1.1.1	DisplayString	read-only	Smartgroup interface name.
STR lacpAggSubIfIndexName1	1.3.6.1.4.1.3902.3.125.1.1.1.1.7	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName10	1.3.6.1.4.1.3902.3.125.1.1.1.1.23	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName11	1.3.6.1.4.1.3902.3.125.1.1.1.1.24	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName12	1.3.6.1.4.1.3902.3.125.1.1.1.1.25	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName13	1.3.6.1.4.1.3902.3.125.1.1.1.1.26	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName14	1.3.6.1.4.1.3902.3.125.1.1.1.1.27	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName15	1.3.6.1.4.1.3902.3.125.1.1.1.1.28	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName16	1.3.6.1.4.1.3902.3.125.1.1.1.1.29	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName2	1.3.6.1.4.1.3902.3.125.1.1.1.1.8	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName3	1.3.6.1.4.1.3902.3.125.1.1.1.1.9	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName4	1.3.6.1.4.1.3902.3.125.1.1.1.1.10	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName5	1.3.6.1.4.1.3902.3.125.1.1.1.1.11	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName6	1.3.6.1.4.1.3902.3.125.1.1.1.1.12	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName7	1.3.6.1.4.1.3902.3.125.1.1.1.1.13	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName8	1.3.6.1.4.1.3902.3.125.1.1.1.1.14	DisplayString	read-only	Aggregated Port Name.
STR lacpAggSubIfIndexName9	1.3.6.1.4.1.3902.3.125.1.1.1.1.22	DisplayString	read-only	Aggregated Port Name.
lacpMIB	1.3.6.1.4.1.3902.3.125			This MIB contains managed object definitions for the ZXROSng LACP
lacpMibObjects	1.3.6.1.4.1.3902.3.125.1
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
U32 zxr10LacpAggActiveLimition	1.3.6.1.4.1.3902.3.125.1.1.1.1.32	Unsigned32	read-only	Aggregation Active Limition.
INT zxr10LacpAggEnableMclag	1.3.6.1.4.1.3902.3.125.1.1.1.1.37	INTEGER	read-only	The flag whether the Aggregation configed mclag.
LAC zxr10LacpAggFastRespond	1.3.6.1.4.1.3902.3.125.1.1.1.1.31	LACPAggFastRespondType	read-only	Aggregation Fast Respond.
I32 zxr10LacpAggHoldOff	1.3.6.1.4.1.3902.3.125.1.1.1.1.36	Integer32	read-only	The HoldOff Time of Aggregation.
INT zxr10LacpAggMclagActorBackup	1.3.6.1.4.1.3902.3.125.1.1.3.1.11	INTEGER	read-only	Mclag Actor Backup configed by each smartgroup.
zxr10LacpAggMclagEntry	1.3.6.1.4.1.3902.3.125.1.1.3.1		not-accessible	Each row index by ifIndex And contain mclag imformation of Aggregating Port.
U32 zxr10LacpAggMclagIccpId	1.3.6.1.4.1.3902.3.125.1.1.3.1.2	Unsigned32	read-only	Mclag Iccp ID binded by each smartgroup.
INT zxr10LacpAggMclagMode	1.3.6.1.4.1.3902.3.125.1.1.3.1.5	INTEGER	read-only	Mclag Mode configed by each smartgroup.
I32 zxr10LacpAggMclagNodeId	1.3.6.1.4.1.3902.3.125.1.1.3.1.4	Integer32	read-only	Mclag NodeID configed by each smartgroup.
INT zxr10LacpAggMclagPartnerBackup	1.3.6.1.4.1.3902.3.125.1.1.3.1.17	INTEGER	read-only	The Mclag Partner Backup of the smartgroup which configed mclag.
I32 zxr10LacpAggMclagPartnerNodeId	1.3.6.1.4.1.3902.3.125.1.1.3.1.16	Integer32	read-only	The Mclag Partner NodeID of the smartgroup which configed mclag.
U32 zxr10LacpAggMclagPartnerPri	1.3.6.1.4.1.3902.3.125.1.1.3.1.14	Unsigned32	read-only	The Mclag Partner Priority of the smartgroup which configed mclag.
U32 zxr10LacpAggMclagPartnerRoid	1.3.6.1.4.1.3902.3.125.1.1.3.1.15	Unsigned32	read-only	The Mclag Partner Roid of the smartgroup which configed mclag.
MAC zxr10LacpAggMclagPartnerSysMac	1.3.6.1.4.1.3902.3.125.1.1.3.1.12	MacAddress	read-only	The Partner System Mac of the smartgroup which configed mclag.
U32 zxr10LacpAggMclagPartnerSysPri	1.3.6.1.4.1.3902.3.125.1.1.3.1.13	Unsigned32	read-only	The Mclag Partner System Priority of the smartgroup which configed mclag.
U32 zxr10LacpAggMclagPriority	1.3.6.1.4.1.3902.3.125.1.1.3.1.8	Unsigned32	read-only	Mclag Priority configed by each smartgroup.
INT zxr10LacpAggMclagRestoreMode	1.3.6.1.4.1.3902.3.125.1.1.3.1.6	INTEGER	read-only	Mclag Restore Mode configed by each smartgroup.
I32 zxr10LacpAggMclagRestoreTime	1.3.6.1.4.1.3902.3.125.1.1.3.1.7	Integer32	read-only	Mclag Restore Time configed by each smartgroup.
U32 zxr10LacpAggMclagRoid	1.3.6.1.4.1.3902.3.125.1.1.3.1.3	Unsigned32	read-only	Mclag Roid configed by each smartgroup.
I32 zxr10LacpAggMclagSgIndex	1.3.6.1.4.1.3902.3.125.1.1.3.1.1	Integer32	read-only	Smartgroup interface index.
MAC zxr10LacpAggMclagSysMac	1.3.6.1.4.1.3902.3.125.1.1.3.1.9	MacAddress	read-only	Mclag System Mac configed by each smartgroup.
U32 zxr10LacpAggMclagSysPri	1.3.6.1.4.1.3902.3.125.1.1.3.1.10	Unsigned32	read-only	Mclag System Priority configed by each smartgroup.
zxr10LacpAggMclagTable	1.3.6.1.4.1.3902.3.125.1.1.3		not-accessible	Configure Aggregating Port mclag parameters.
MAC zxr10LacpAggPartnerMacAddress	1.3.6.1.4.1.3902.3.125.1.2.1.1.16	MacAddress	read-only	Lacp Port Partner Mac Address.
U32 zxr10LacpAggPartnerSysPri	1.3.6.1.4.1.3902.3.125.1.2.1.1.15	Unsigned32	read-only	Lacp Port Partner System Priority.
LAC zxr10LacpAggPortBackup	1.3.6.1.4.1.3902.3.125.1.2.1.1.12	LACPPortBackupType	read-only	Lacp Port Backup.
INT zxr10LacpAggPortDispersion	1.3.6.1.4.1.3902.3.125.1.1.1.1.38	INTEGER	read-only	The port dispersion switch of Aggregation.
U32 zxr10LacpAggPortPartnerPriority	1.3.6.1.4.1.3902.3.125.1.2.1.1.11	Unsigned32	read-only	Lacp Partner Port Priority.
LAC zxr10LacpAggPortState	1.3.6.1.4.1.3902.3.125.1.2.1.1.13	LACPPortStateType	read-only	Lacp Port Acitive Status.
STR zxr10LacpAggPortTrackName	1.3.6.1.4.1.3902.3.125.1.2.1.1.14	DisplayString	read-only	Lacp Port Track Name.
LAC zxr10LacpAggRestoreMode	1.3.6.1.4.1.3902.3.125.1.1.1.1.33	LACPRestoreModeType	read-only	Aggregation Restore Mode.
I32 zxr10LacpAggRestoreTime	1.3.6.1.4.1.3902.3.125.1.1.1.1.34	Integer32	read-only	Aggregation Restore Time.
I32 zxr10LacpAggTimeOut	1.3.6.1.4.1.3902.3.125.1.1.1.1.35	Integer32	read-only	Aggregation TimeOut.

RFC description

Manages Link Aggregation Control Protocol (LACP) on ZTE ZXR10 devices including port aggregation and load balancing.

Start monitoring ZTE ZXR10 router/switch (ROSng-based) (LACP aggregation-group actor/partner-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-LACP-MIB

What Is ZXR10-LACP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description