ZXR10-IF-TABLE-MIB

All MIBs › ZXR10-IF-TABLE-MIB

Organization: ZTE Corporation

Last Updated: 2018-05-16

Category: ZTE ZXR10 Interface and Statistics

Description: Defines ZTE ZXR10 interface table entries with physical and logical port attributes, status, and configuration parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-IF-TABLE-MIB?

This is a ZTE proprietary MIB defining interface table entries for the ZXR10 router/switch platform, covering both physical and logical port attributes such as status and configuration parameters, per its ZXROS v4.6.03 release notes. It extends the standard interface concept with ZTE-specific fields for querying and configuring Ethernet interfaces on ZXR10 equipment. Its monitoring value lies in tracking interface operational status and configuration state at both the physical and logical level, helping an administrator confirm a port is enabled and correctly configured, which supports diagnosing link or configuration-related connectivity issues. It is built to complement, rather than replace, the standard IF-MIB interface model. It is deployed on ZTE ZXR10 routers and switches, commonly used by carriers and enterprises in ZTE-equipped networks, where administrators can download the ZXR10-IF-TABLE-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IF-TABLE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch

Monitoring Examples

An administrator would poll the ZXR10 interface table's status and configuration objects to confirm a given physical or logical port is operationally up and provisioned with the expected parameters. A port reporting a down or misconfigured status when it should be passing traffic would flag a cabling, provisioning, or hardware fault on that ZXR10 unit. No sample object names were provided for this module, so specific identifiers cannot be confirmed here.

What Can Be Monitored

physical port status
logical port status
interface configuration parameters

Imported Objects

From IPV6-TC

Ipv6Address

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From ZXR10-SMI

zxr10interfaces

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10CipRelation	1.3.6.1.4.1.3902.3.103.4.5.1.2.2
TIM zxr10EthPhyIfTableLastChange	1.3.6.1.4.1.3902.3.103.4.1.3	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which ethernet interface table changed
TIM zxr10EthSubIfTableLastChange	1.3.6.1.4.1.3902.3.103.4.1.2	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which ethernet sub-interface table changed
zxr10IfAttrEntry	1.3.6.1.4.1.3902.3.103.4.2.1		not-accessible
I32 zxr10IfAttrIfIndex	1.3.6.1.4.1.3902.3.103.4.2.1.2	Integer32	read-only	Interface index
INT zxr10IfAttrIfL2L3Attr	1.3.6.1.4.1.3902.3.103.4.2.1.3	INTEGER	read-only	Interface L2/L3 attribute
STR zxr10IfAttrIfName	1.3.6.1.4.1.3902.3.103.4.2.1.1	DisplayString	read-only	Interface name
zxr10IfAttrTable	1.3.6.1.4.1.3902.3.103.4.2		not-accessible	Interface attribute table
STR zxr10IfCfgDescr	1.3.6.1.4.1.3902.3.103.4.3.1.23	DisplayString	read-create	A textual string containing information about the interface. This string may be set by the network management system.
INT zxr10IfCfgGateWay	1.3.6.1.4.1.3902.3.103.4.3.1.22	INTEGER	read-only	Interface configured whether it's gateway interface.
INT zxr10IfCfgIpLdshPolicy	1.3.6.1.4.1.3902.3.103.4.3.1.20	INTEGER	read-only	Interface configured ip load sharing policy.
U32 zxr10IfCfgIpMtu	1.3.6.1.4.1.3902.3.103.4.3.1.5	Unsigned32	read-create	Interface configured ip mtu. Different configuration ranges in different interfaces.
U32 zxr10IfCfgIpv6Mtu	1.3.6.1.4.1.3902.3.103.4.3.1.7	Unsigned32	read-only	Interface configured ipv6 mtu. Different configuration ranges in different interfaces.
BWT zxr10IfCfgLdshBw	1.3.6.1.4.1.3902.3.103.4.3.1.18	BwType	read-only	Interface configured load sharing bandwidth.
I32 zxr10IfCfgLdshPriority	1.3.6.1.4.1.3902.3.103.4.3.1.16	Integer32	read-only	Interface configured load sharing priority.
I32 zxr10IfCfgLdshWaterLine	1.3.6.1.4.1.3902.3.103.4.3.1.17	Integer32	read-only	Interface configured load sharing waterline. The waterline is an option attribute, if only when you have set the attribute priority then you can set waterline.
MAC zxr10IfCfgMacAddress	1.3.6.1.4.1.3902.3.103.4.3.1.11	MacAddress	read-only	Interface configured mac-address.
T/F zxr10IfCfgMacAddressAnycast	1.3.6.1.4.1.3902.3.103.4.3.1.24	TruthValue	read-only	The flag of the interface effective mac-address is anycast or not.
U32 zxr10IfCfgMacOffset	1.3.6.1.4.1.3902.3.103.4.3.1.13	Unsigned32	read-only	Interface configured mac offset. The range of macoffset is alterable,it is decided by pm.
U32 zxr10IfCfgMplsMtu	1.3.6.1.4.1.3902.3.103.4.3.1.9	Unsigned32	read-create	Interface configured mpls mtu. Different configuration ranges in different interfaces.
U32 zxr10IfCfgMtu	1.3.6.1.4.1.3902.3.103.4.3.1.3	Unsigned32	read-create	Interface configured card mtu. Different configuration ranges in different interfaces.
I32 zxr10IfCfgMultiShareCost	1.3.6.1.4.1.3902.3.103.4.3.1.21	Integer32	read-only	Interface configured mulitpule sharing cost.
ROW zxr10IfCfgRowStatus	1.3.6.1.4.1.3902.3.103.4.3.1.100	RowStatus	read-create	Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6).
STR zxr10IfCfgUnnumberName	1.3.6.1.4.1.3902.3.103.4.3.1.15	DisplayString	read-create	Interface ip unnumber name.
STR zxr10IfCfgVrfName	1.3.6.1.4.1.3902.3.103.4.3.1.14	DisplayString	read-only	Interface vrf name.
STR zxr10IfCipBindCipName	1.3.6.1.4.1.3902.3.103.4.5.1.2.2.2.1.1	DisplayString	not-accessible	The textual name of the cip interface.
zxr10IfCipBindEntry	1.3.6.1.4.1.3902.3.103.4.5.1.2.2.2.1		not-accessible	An entry containing objects for binding interface on a cip interface.
STR zxr10IfCipBindPhyName	1.3.6.1.4.1.3902.3.103.4.5.1.2.2.2.1.2	DisplayString	read-create	The textual name of the cip binding interface.
zxr10IfCipBindStatGroup	1.3.6.1.4.1.3902.3.103.4.5.1.2.2.1
zxr10IfCipBindTable	1.3.6.1.4.1.3902.3.103.4.5.1.2.2.2		not-accessible	A list of cip binding entries.
zxr10IfCommonGlobalObjects	1.3.6.1.4.1.3902.3.103.4.5.2.1
zxr10IfCommonMIB	1.3.6.1.4.1.3902.3.103.4.5.2
zxr10IfCommonObjects	1.3.6.1.4.1.3902.3.103.4.5.2.2
U32 zxr10IfEffectiveIpMtu	1.3.6.1.4.1.3902.3.103.4.3.1.6	Unsigned32	read-only	Interface effective ip mtu. Different effective ranges in different interfaces.
U32 zxr10IfEffectiveIpv6Mtu	1.3.6.1.4.1.3902.3.103.4.3.1.8	Unsigned32	read-only	Interface effective ipv6 mtu. Different effective ranges in different interfaces.
BWT zxr10IfEffectiveLdshBw	1.3.6.1.4.1.3902.3.103.4.3.1.19	BwType	read-only	Interface effective load sharing bandwidth.
MAC zxr10IfEffectiveMacAddress	1.3.6.1.4.1.3902.3.103.4.3.1.12	MacAddress	read-only	Interface effective mac-address.
U32 zxr10IfEffectiveMplsMtu	1.3.6.1.4.1.3902.3.103.4.3.1.10	Unsigned32	read-only	Interface effective mpls mtu. Different effective ranges in different interfaces.
U32 zxr10IfEffectiveMtu	1.3.6.1.4.1.3902.3.103.4.3.1.4	Unsigned32	read-only	Interface effective card mtu. Different effective ranges in different interfaces.
zxr10IfEntry	1.3.6.1.4.1.3902.3.103.4.3.1		not-accessible
zxr10IfGroup	1.3.6.1.4.1.3902.3.103.4.5.1.2.1
zxr10IfGroupBindEntry	1.3.6.1.4.1.3902.3.103.4.5.1.2.1.3.1		not-accessible	An entry containing management information applicable to a particular interface binded group.
STR zxr10IfGroupBindGroupName	1.3.6.1.4.1.3902.3.103.4.5.1.2.1.3.1.2	DisplayString	read-create	The textual name of the interface group.
STR zxr10IfGroupBindMemName	1.3.6.1.4.1.3902.3.103.4.5.1.2.1.3.1.1	DisplayString	not-accessible	The textual name of the member interface.
zxr10IfGroupBindTable	1.3.6.1.4.1.3902.3.103.4.5.1.2.1.3		not-accessible	A list of interface group binding entries.
zxr10IfGroupStatGroup	1.3.6.1.4.1.3902.3.103.4.5.1.2.1.1
U32 zxr10IfIndex	1.3.6.1.4.1.3902.3.103.4.3.1.2	Unsigned32	read-only	Interface index
STR zxr10IfName	1.3.6.1.4.1.3902.3.103.4.3.1.1	DisplayString	read-only	Interface name
zxr10IfTable	1.3.6.1.4.1.3902.3.103.4.3		not-accessible	Interface table
TIM zxr10IfTableLastChange	1.3.6.1.4.1.3902.3.103.4.1.1	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which interface table changed
zxr10IfTableMgtConformance	1.3.6.1.4.1.3902.3.103.4.7
zxr10IfTableMgtMIB	1.3.6.1.4.1.3902.3.103.4			ZXROS v4.6.03 ethnet query and configuration MIB
zxr10IfTableMgtMIBObjects	1.3.6.1.4.1.3902.3.103.4.1
zxr10IfTableMgtNotifications	1.3.6.1.4.1.3902.3.103.4.6
zxr10IfTableMgtObjects	1.3.6.1.4.1.3902.3.103.4.5
zxr10IfTrackEntry	1.3.6.1.4.1.3902.3.103.4.4.1		not-accessible	A list of interface track entries.
I32 zxr10IfTrackIfIndex	1.3.6.1.4.1.3902.3.103.4.4.1.3	Integer32	read-only	Interface index
STR zxr10IfTrackIfName	1.3.6.1.4.1.3902.3.103.4.4.1.1	DisplayString	not-accessible	Interface name
INT zxr10IfTrackIsGrpTrack	1.3.6.1.4.1.3902.3.103.4.4.1.5	INTEGER	read-only	Group track flag: false(0) --zxr10IfTrackTrackName is not group track true(1) --zxr10IfTrackTrackName is group track
zxr10IfTrackTable	1.3.6.1.4.1.3902.3.103.4.4		not-accessible	Interface track table
STR zxr10IfTrackTrackName	1.3.6.1.4.1.3902.3.103.4.4.1.2	DisplayString	not-accessible	Track name
INT zxr10IfTrackTrackType	1.3.6.1.4.1.3902.3.103.4.4.1.4	INTEGER	not-accessible	Track type: l2(1) --zxr10IfTrackTrackName is l2 track ipv4(2) --zxr10IfTrackTrackName is ipv4 track ipv6(3) --zxr10IfTrackTrackName is ipv6 track
zxr10IfTrigger	1.3.6.1.4.1.3902.3.103.4.5.2.2.1
zxr10IfTriggerEntry	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1		not-accessible	A list of interface trigger entries.
I32 zxr10IfTriggerIfIndex	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.3	Integer32	read-only	Interface index
STR zxr10IfTriggerIfName	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.1	DisplayString	not-accessible	Interface name
INT zxr10IfTriggerIsGrpTrack	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.5	INTEGER	read-only	Group track flag: true(1) --zxr10IfTriggerTrackName is group track. false(2) --zxr10IfTriggerTrackName is not group track.
I32 zxr10IfTriggerShutDownPeriod	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.6	Integer32	read-only	The time of keeping the port shutdown.
zxr10IfTriggerStatGroup	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.1
zxr10IfTriggerTable	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2		not-accessible	Interface trigger table
STR zxr10IfTriggerTrackName	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.2	DisplayString	read-only	Track name
INT zxr10IfTriggerTrackTrigger	1.3.6.1.4.1.3902.3.103.4.5.2.2.1.2.1.4	INTEGER	read-only	Track trigger: block(1) --whether or not to block the interface according to track status. shutdown(2) --whether or not to shutdown the interface according to track status. none(3) --no configuration of track trigger. reverse(4) ----whether or not to make the --interface physical down according to track status
zxr10IPv6Addr	1.3.6.1.4.1.3902.3.103.4.5.2.2.2
zxr10IPv6AddrEntry	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1		not-accessible
ADR zxr10IPv6Address	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1.3	Ipv6Address	read-only	The ipv6 address on this interface
STR zxr10IPv6AddrIfName	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1.2	DisplayString	read-only	Interface name
I32 zxr10IPv6AddrPrefixLength	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1.4	Integer32	read-only	The length of the ipv6 address prefix
zxr10IPv6AddrStatGroup	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.1
zxr10IPv6AddrTable	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2		not-accessible	Ipv6 address config table.
INT zxr10IPv6AddrType	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1.5	INTEGER	read-only	The type of the ipv6 address: linklocal(1) --linklocal address eui-64(2) --eui-64 address anycast(3) --anycast address unicast(4) --unicast address If the result is 0,interface exist and support this node, but configuration is empty.
I32 zxr10IPv6Index	1.3.6.1.4.1.3902.3.103.4.5.2.2.2.2.1.1	Integer32	not-accessible	Interface Index
zxr10PortRelationConformance	1.3.6.1.4.1.3902.3.103.4.5.1.4
zxr10PortRelationGlobalObjects	1.3.6.1.4.1.3902.3.103.4.5.1.1
zxr10PortRelationMIB	1.3.6.1.4.1.3902.3.103.4.5.1
zxr10PortRelationNotifications	1.3.6.1.4.1.3902.3.103.4.5.1.3
zxr10PortRelationObjects	1.3.6.1.4.1.3902.3.103.4.5.1.2
TIM zxr10PosPhyIfTableLastChange	1.3.6.1.4.1.3902.3.103.4.1.4	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which pos interface table changed

RFC description

ZTE ZXR10 Ethernet interface query and configuration including MTU and IP settings.

Start monitoring ZTE ZXR10 router/switch (physical/logical port status and configuration status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-IF-TABLE-MIB

What Is ZXR10-IF-TABLE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description