ZTE-AN-OPTICAL-MODULE-PERF-MIB

All MIBs › ZTE-AN-OPTICAL-MODULE-PERF-MIB

Organization: ZTE Corporation

Last Updated: 2017-06-21

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node optical module performance including Tx/Rx power, temperature, and bias current.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-OPTICAL-MODULE-PERF-MIB?

ZTE-AN-OPTICAL-MODULE-PERF-MIB is a vendor-specific ZTE MIB (under the zxAnInterface arc) that collects historical performance-monitoring data for optical transceiver modules on ZTE access-network (AN) equipment such as OLTs/ONUs. It defines parallel current and history tables at multiple granularities — 15-minute, 1-day, and per-minute intervals, plus channel-level variants for WDM-capable modules — each keyed by ifIndex and reporting transmitted/received optical power, laser bias current, supply voltage, and module temperature, with history entries additionally carrying an interval-valid-data flag and timestamp. This closely mirrors DOM/DDM (Digital Diagnostics Monitoring) data exposed by SFP/SFP+ transceivers, surfaced here via SNMP. Monitoring it is essential for proactively detecting failing or degrading optical transceivers, since declining Rx power or rising bias current/temperature trends across successive intervals typically precede a hard optical link failure. It's deployed on ZTE access-network platforms (OLT/ONU line cards) with pluggable optics, and the ZTE-AN-OPTICAL-MODULE-PERF-MIB MIB is typically loaded into an NMS to trend these DOM parameters over time.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-OPTICAL-MODULE-PERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access-network (AN) equipment — OLT/ONU platforms with pluggable optical modules

Monitoring Examples

An operator trends zxAnOpticalH15MRxPower across successive history-table entries for a given port; a steadily declining Rx power approaching the receiver sensitivity floor, especially alongside rising bias current, would signal an aging or failing optical module before it causes a hard link outage.

What Can Be Monitored

optical Tx/Rx power (current and historical intervals)
laser bias current
module supply voltage
module temperature
interval valid-data flag / elapsed time
channel-level performance for WDM optical modules

Imported Objects

From HC-PerfHist-TC-MIB

HCPerfTimeElapsed

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY

From SNMPv2-TC

DateAndTime
TruthValue

From ZTE-AN-SMI

zxAnInterface

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxAnOpticalC15MTxPower OID:

Select a ZTE access-network (AN) equipment, OLT/ONU platforms with pluggable optical module (historical optical-power/bias-current/temperature status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnOpticalC15MTxPower into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The optical module transmitted power value in current 15-minute interval. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 zxAnOptChanC15MBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.11.1.3	Integer32	read-only	The optical module channel bias current in current 15-minute interval.
HCP zxAnOptChanC15MTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.11.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current 15-minute interval.
I32 zxAnOptChanC15MTxPower	1.3.6.1.4.1.3902.1082.30.45.2.11.1.2	Integer32	read-only	The optical module channel transmitted power in current 15-minute interval.
I32 zxAnOptChanC1DBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.12.1.3	Integer32	read-only	The optical module channel bias current in current 1-day interval.
HCP zxAnOptChanC1DTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.12.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current 1-day interval.
I32 zxAnOptChanC1DTxPower	1.3.6.1.4.1.3902.1082.30.45.2.12.1.2	Integer32	read-only	The optical module channel transmitted power in current 1-day interval.
I32 zxAnOptChanCMinBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.15.1.3	Integer32	read-only	The optical module channel bias current in current minutes interval.
HCP zxAnOptChanCMinTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.15.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current minutes interval.
I32 zxAnOptChanCMinTxPower	1.3.6.1.4.1.3902.1082.30.45.2.15.1.2	Integer32	read-only	The optical module channel transmitted power in current minutes interval.
zxAnOptChanCurr15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.11.1		not-accessible	An entry of zxAnOptChanCurr15MinPerfTable.
zxAnOptChanCurr15MinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.11		not-accessible	The 15-minute interval performance data table of the optical module channel.
zxAnOptChanCurr1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.12.1		not-accessible	An entry of zxAnOptChanCurr1DayPerfTable.
zxAnOptChanCurr1DayPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.12		not-accessible	The 1-day interval performance data table of the optical module channel.
zxAnOptChanCurrMinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.15.1		not-accessible	An entry of zxAnOptChanCurrMinPerfTable.
zxAnOptChanCurrMinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.15		not-accessible	The minutes interval performance data table of the optical module channel.
I32 zxAnOptChanH15MBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.13.1.5	Integer32	read-only	The optical module channel bias current in historical 15-minute interval.
DAT zxAnOptChanH15MDateTime	1.3.6.1.4.1.3902.1082.30.45.2.13.1.3	DateAndTime	read-only	The 15-minute interval performance data generation time.
I32 zxAnOptChanH15MIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.13.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOptChanH15MIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.13.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOptChanH15MTxPower	1.3.6.1.4.1.3902.1082.30.45.2.13.1.4	Integer32	read-only	The optical module channel transmitted power in historical 15-minute interval.
I32 zxAnOptChanH1DBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.14.1.5	Integer32	read-only	The optical module channel bias current in historical 1-day interval.
DAT zxAnOptChanH1DDateTime	1.3.6.1.4.1.3902.1082.30.45.2.14.1.3	DateAndTime	read-only	The 1-day interval performance data generation time.
I32 zxAnOptChanH1DIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.14.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOptChanH1DIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.14.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOptChanH1DTxPower	1.3.6.1.4.1.3902.1082.30.45.2.14.1.4	Integer32	read-only	The optical module channel transmitted power in historical 1-day interval.
zxAnOptChanHis15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.13.1		not-accessible	An entry of zxAnOptChanHis15MinPerfTable.
zxAnOptChanHis15MinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.13		not-accessible	The 15-minute interval historical performance data table of the optical module channel.
zxAnOptChanHis1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.14.1		not-accessible	An entry of zxAnOptChanHis1DayPerfTable.
zxAnOptChanHis1DayPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.14		not-accessible	The 1-day interval historical performance data table of the optical module channel.
zxAnOptChanHisMinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.16.1		not-accessible	An entry of zxAnOptChanHisMinPerfTable.
zxAnOptChanHisMinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.16		not-accessible	The minutes interval historical performance data table of the optical module channel.
I32 zxAnOptChanHMinBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.16.1.5	Integer32	read-only	The optical module channel bias current in historical minutes interval.
DAT zxAnOptChanHMinDateTime	1.3.6.1.4.1.3902.1082.30.45.2.16.1.3	DateAndTime	read-only	The minutes interval performance data generation time.
I32 zxAnOptChanHMinIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.16.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOptChanHMinIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.16.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOptChanHMinTxPower	1.3.6.1.4.1.3902.1082.30.45.2.16.1.4	Integer32	read-only	The optical module channel transmitted power in historical minutes interval.
I32 zxAnOpticalC15MBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.3.1.4	Integer32	read-only	The optical module bias current value in current 15-minute interval.
I32 zxAnOpticalC15MRxPower	1.3.6.1.4.1.3902.1082.30.45.2.3.1.3	Integer32	read-only	The optical module received power value in current 15-minute interval.
I32 zxAnOpticalC15MSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.3.1.5	Integer32	read-only	The optical module supply voltage value in current 15-minute interval.
I32 zxAnOpticalC15MTemperature	1.3.6.1.4.1.3902.1082.30.45.2.3.1.6	Integer32	read-only	The optical mudule temperature value in current 15-minute interval.
HCP zxAnOpticalC15MTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.3.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current 15-minute interval.
I32 zxAnOpticalC15MTxPowerEx	1.3.6.1.4.1.3902.1082.30.45.2.3.1.2	Integer32	read-only	The optical module transmitted power value in current 15-minute interval.
I32 zxAnOpticalC1DBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.4.1.4	Integer32	read-only	The optical module bias current value in current 1-day interval.
I32 zxAnOpticalC1DRxPower	1.3.6.1.4.1.3902.1082.30.45.2.4.1.3	Integer32	read-only	The optical module received power value in current 1-day interval.
I32 zxAnOpticalC1DSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.4.1.5	Integer32	read-only	The optical module supply voltage value in current 1-day interval.
I32 zxAnOpticalC1DTemperature	1.3.6.1.4.1.3902.1082.30.45.2.4.1.6	Integer32	read-only	The optical module temperature value in current 1-day interval.
HCP zxAnOpticalC1DTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.4.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current 1-day interval.
I32 zxAnOpticalC1DTxPower	1.3.6.1.4.1.3902.1082.30.45.2.4.1.2	Integer32	read-only	The optical module transmitted power value in current 1-day interval.
I32 zxAnOpticalCMinBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.7.1.4	Integer32	read-only	The optical module bias current value in current minutes interval.
I32 zxAnOpticalCMinRxPower	1.3.6.1.4.1.3902.1082.30.45.2.7.1.3	Integer32	read-only	The optical module received power value in current minutes interval.
I32 zxAnOpticalCMinSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.7.1.5	Integer32	read-only	The optical module supply voltage value in current minutes interval.
I32 zxAnOpticalCMinTemperature	1.3.6.1.4.1.3902.1082.30.45.2.7.1.6	Integer32	read-only	The optical mudule temperature value in current minutes interval.
HCP zxAnOpticalCMinTimeElapsed	1.3.6.1.4.1.3902.1082.30.45.2.7.1.1	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current minutes interval.
I32 zxAnOpticalCMinTxPower	1.3.6.1.4.1.3902.1082.30.45.2.7.1.2	Integer32	read-only	The optical module transmitted power value in current minutes interval.
zxAnOpticalCurr15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.3.1		not-accessible	An entry of zxAnOpticalCurr15MinPerfTable.
zxAnOpticalCurr15MinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.3		not-accessible	The 15-minute interval performance data table of the optical module.
zxAnOpticalCurr1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.4.1		not-accessible	An entry of zxAnOptModuleCurr1DayPerfTable.
zxAnOpticalCurr1DayPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.4		not-accessible	The 1-day interval performance data table of the optical mudule.
zxAnOpticalCurrMinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.7.1		not-accessible	An entry of zxAnOpticalCurrMinPerfTable.
zxAnOpticalCurrMinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.7		not-accessible	The minutes interval performance data table of the optical module.
I32 zxAnOpticalH15MBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.5.1.6	Integer32	read-only	The optical module bias current value in historical 15-minute interval.
DAT zxAnOpticalH15MDateTime	1.3.6.1.4.1.3902.1082.30.45.2.5.1.3	DateAndTime	read-only	The 15-minute interval performance data generation time.
I32 zxAnOpticalH15MIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.5.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOpticalH15MIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.5.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOpticalH15MRxPower	1.3.6.1.4.1.3902.1082.30.45.2.5.1.5	Integer32	read-only	The optical module received power value in historical 15-minute interval.
I32 zxAnOpticalH15MSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.5.1.7	Integer32	read-only	The optical module supply voltage value in historical 15-minute interval.
I32 zxAnOpticalH15MTemperature	1.3.6.1.4.1.3902.1082.30.45.2.5.1.8	Integer32	read-only	The optical module temperature value in historical 15-minute interval.
I32 zxAnOpticalH15MTxPower	1.3.6.1.4.1.3902.1082.30.45.2.5.1.4	Integer32	read-only	The optical module transmitted power value in historical 15-minute interval.
I32 zxAnOpticalH1DBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.6.1.6	Integer32	read-only	The optical module bias current value in historical 1-day interval.
DAT zxAnOpticalH1DDateTime	1.3.6.1.4.1.3902.1082.30.45.2.6.1.3	DateAndTime	read-only	The 1-day interval performance data generation time.
I32 zxAnOpticalH1DIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.6.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOpticalH1DIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.6.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOpticalH1DRxPower	1.3.6.1.4.1.3902.1082.30.45.2.6.1.5	Integer32	read-only	The optical module received power value in historical 1-day interval.
I32 zxAnOpticalH1DSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.6.1.7	Integer32	read-only	The optical module supply voltage value in historical 1-day interval.
I32 zxAnOpticalH1DTemperature	1.3.6.1.4.1.3902.1082.30.45.2.6.1.8	Integer32	read-only	The optical module temperature value in historical 1-day interval.
I32 zxAnOpticalH1DTxPower	1.3.6.1.4.1.3902.1082.30.45.2.6.1.4	Integer32	read-only	The optical module transmitted power value in historical 1-day interval.
zxAnOpticalHis15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.5.1		not-accessible	An entry of zxAnOpticalHis15MinPerfTable.
zxAnOpticalHis15MinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.5		not-accessible	The 15-minute interval historical performance data table of the optical module.
zxAnOpticalHis1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.6.1		not-accessible	An entry of zxAnOpticalHis1DayPerfTable.
zxAnOpticalHis1DayPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.6		not-accessible	The 1-day interval historical performance data table of the optical module.
zxAnOpticalHisMinPerfEntry	1.3.6.1.4.1.3902.1082.30.45.2.8.1		not-accessible	An entry of zxAnOpticalHisMinPerfTable.
zxAnOpticalHisMinPerfTable	1.3.6.1.4.1.3902.1082.30.45.2.8		not-accessible	The minutes interval historical performance data table of the optical module.
I32 zxAnOpticalHMinBiasCurrent	1.3.6.1.4.1.3902.1082.30.45.2.8.1.6	Integer32	read-only	The optical module bias current value in historical minutes interval.
DAT zxAnOpticalHMinDateTime	1.3.6.1.4.1.3902.1082.30.45.2.8.1.3	DateAndTime	read-only	The minutes interval performance data generation time.
I32 zxAnOpticalHMinIntervalNo	1.3.6.1.4.1.3902.1082.30.45.2.8.1.1	Integer32	not-accessible	The performance data interval number.
T/F zxAnOpticalHMinIntervalValidData	1.3.6.1.4.1.3902.1082.30.45.2.8.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
I32 zxAnOpticalHMinRxPower	1.3.6.1.4.1.3902.1082.30.45.2.8.1.5	Integer32	read-only	The optical module received power value in historical minutes interval.
I32 zxAnOpticalHMinSupplyVoltage	1.3.6.1.4.1.3902.1082.30.45.2.8.1.7	Integer32	read-only	The optical module supply voltage value in historical minutes interval.
I32 zxAnOpticalHMinTemperature	1.3.6.1.4.1.3902.1082.30.45.2.8.1.8	Integer32	read-only	The optical module temperature value in historical minutes interval.
I32 zxAnOpticalHMinTxPower	1.3.6.1.4.1.3902.1082.30.45.2.8.1.4	Integer32	read-only	The optical module transmitted power value in historical minutes interval.
zxAnOpticalModulePerfMib	1.3.6.1.4.1.3902.1082.30.45			The MIB module for the management of the optical module performance.
zxAnOpticalModulePerfObjects	1.3.6.1.4.1.3902.1082.30.45.2
zxAnOpticalPerfCompliance	1.3.6.1.4.1.3902.1082.30.45.4.1.1			The compliance statement for support of the optical performance MIB module.
zxAnOpticalPerfCompliances	1.3.6.1.4.1.3902.1082.30.45.4.1
zxAnOpticalPerfConformances	1.3.6.1.4.1.3902.1082.30.45.4
zxAnOpticalPerfCurr15MinGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.1			A collection of objects providing for current 15-minute interval performance data of the optical module.
zxAnOpticalPerfCurr1DayGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.2			A collection of objects providing for current 1-day interval performance data of the optical module.
zxAnOpticalPerfCurrMinGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.5			A collection of objects providing for current minutes interval performance data of the optical module.
zxAnOpticalPerfGroups	1.3.6.1.4.1.3902.1082.30.45.4.2
zxAnOpticalPerfHis15MinGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.3			A collection of objects providing for history 15-minute interval performance data of the optical module.
zxAnOpticalPerfHis1DayGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.4			A collection of objects providing for history 1-day interval performance data of the optical module.
zxAnOpticalPerfHisMinGroup	1.3.6.1.4.1.3902.1082.30.45.4.2.6			A collection of objects providing for history minutes interval performance data of the optical module.

RFC description

Tracks optical module performance metrics and channel statistics for ZTE access networks.

Start monitoring ZTE access-network (AN) equipment, OLT/ONU platforms with pluggable optical modules (historical optical-power/bias-current/temperature status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-OPTICAL-MODULE-PERF-MIB