ZXR10-FILE-SYSTEM-MIB

All MIBs › ZXR10-FILE-SYSTEM-MIB

Organization: ZTE Corporation

Last Updated: 2015-04-14

Category: ZTE ZXR10 Routing and Switching

Description: Covers file system operations on ZTE ZXR10 routers, including storage capacity tracking and file transfer management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-FILE-SYSTEM-MIB?

ZXR10-FILE-SYSTEM-MIB covers ZTE ZXR10 (T8000-series) routers running ROSng and reports the device's internal and removable storage inventory, such as flash, compact flash, or USB media. It exposes a storage table describing each storage device's name, type, description, total and available volume, removal status, initialization time, and an associated partition table. It is squarely a hardware-status MIB used to monitor storage capacity and physical presence -- catching low-disk-space conditions or unexpectedly removed storage media before they cause a firmware upgrade or configuration-save failure. It is a ZTE-proprietary module, though it fills the same role as the storage-monitoring section of the standard HOST-RESOURCES-MIB's hrStorageTable. It is typically deployed on ZXR10 core/edge routers where operators track flash/CF storage utilization ahead of firmware upgrades and configuration persistence operations. Engineers can download the ZXR10-FILE-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-FILE-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 (T8000 series) router

Monitoring Examples

An operator would compare zxr10storageVolumAvailable against zxr10storageVolumTotal for each entry in zxr10storageTable (keyed by zxr10storageIndex/zxr10storageName) to compute free-space percentage on the router's flash or CF card, catching a device running low on space before a firmware upgrade fails partway through. zxr10storageRemoved flags whether removable media such as a USB stick or CF card has been physically pulled, and zxr10partitionTable exposes the partition layout defined on that storage device.

What Can Be Monitored

storage device inventory
total storage capacity
available/free storage space
removable media presence
storage device initialization time
partition table layout

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902			ZXR10 T8000 ZXR10FILESYSTEM-MIB
zxr10	1.3.6.1.4.1.3902.3
zxr10RosngMIB	1.3.6.1.4.1.3902.3.6000
zxr10fileSystemMib	1.3.6.1.4.1.3902.3.6000.5
zxr10storageTable	1.3.6.1.4.1.3902.3.6000.5.1		not-accessible
zxr10storageEntry	1.3.6.1.4.1.3902.3.6000.5.1.1		not-accessible
INT zxr10storageIndex	1.3.6.1.4.1.3902.3.6000.5.1.1.1	INTEGER	read-only
STR zxr10storageName	1.3.6.1.4.1.3902.3.6000.5.1.1.2	DisplayString	read-only
INT zxr10storageType	1.3.6.1.4.1.3902.3.6000.5.1.1.3	INTEGER	read-only
STR zxr10storageDesc	1.3.6.1.4.1.3902.3.6000.5.1.1.4	DisplayString	read-write
C64 zxr10storageVolumTotal	1.3.6.1.4.1.3902.3.6000.5.1.1.5	Counter64	read-only
C64 zxr10storageVolumAvailable	1.3.6.1.4.1.3902.3.6000.5.1.1.6	Counter64	read-only
INT zxr10storageRemoved	1.3.6.1.4.1.3902.3.6000.5.1.1.7	INTEGER	read-only
STR zxr10storageInitTime	1.3.6.1.4.1.3902.3.6000.5.1.1.8	DisplayString	read-only
C32 zxr10storageDistrictNum	1.3.6.1.4.1.3902.3.6000.5.1.1.9	Counter32	read-only
zxr10partitionTable	1.3.6.1.4.1.3902.3.6000.5.2		not-accessible
zxr10partitionEntry	1.3.6.1.4.1.3902.3.6000.5.2.1		not-accessible
INT zxr10partitionIndex	1.3.6.1.4.1.3902.3.6000.5.2.1.1	INTEGER	read-only
STR zxr10partitionName	1.3.6.1.4.1.3902.3.6000.5.2.1.2	DisplayString	read-only
STR zxr10partitionDesc	1.3.6.1.4.1.3902.3.6000.5.2.1.3	DisplayString	read-write
C64 zxr10partitionVolumTotal	1.3.6.1.4.1.3902.3.6000.5.2.1.4	Counter64	read-only
C64 zxr10partitionVolumAvailable	1.3.6.1.4.1.3902.3.6000.5.2.1.5	Counter64	read-only
C32 zxr10partitionTotalFiles	1.3.6.1.4.1.3902.3.6000.5.2.1.6	Counter32	read-only
STR zxr10partitionAttribute	1.3.6.1.4.1.3902.3.6000.5.2.1.7	DisplayString	read-only
zxr10fileTable	1.3.6.1.4.1.3902.3.6000.5.3		not-accessible	The table of file information
zxr10fileEntry	1.3.6.1.4.1.3902.3.6000.5.3.1		not-accessible	An entry containing file information
I32 zxr10fileIndex	1.3.6.1.4.1.3902.3.6000.5.3.1.1	Integer32	read-only	The index number of the file
STR zxr10fileName	1.3.6.1.4.1.3902.3.6000.5.3.1.2	DisplayString	read-only	The name of the file
STR zxr10fileAttribute	1.3.6.1.4.1.3902.3.6000.5.3.1.3	DisplayString	read-only	The attribute of the item. Use to describe the attribute of the item if the attribute is directory, else use ---- to describe the attribute of the item.
C32 zxr10fileSize	1.3.6.1.4.1.3902.3.6000.5.3.1.4	Counter32	read-only	The size of the file
STR zxr10fileModifyTime	1.3.6.1.4.1.3902.3.6000.5.3.1.5	DisplayString	read-only	The last modification time of the file
STR zxr10fileLocation	1.3.6.1.4.1.3902.3.6000.5.3.1.6	DisplayString	read-only	The location of the file
zxr10FSCopyTable	1.3.6.1.4.1.3902.3.6000.5.4		not-accessible	The table of file-copy
zxr10FSCopyEntry	1.3.6.1.4.1.3902.3.6000.5.4.1		not-accessible	This list contains file-copy parameters
U32 zxr10FSCopyIndex	1.3.6.1.4.1.3902.3.6000.5.4.1.1	Unsigned32	not-accessible	Object which specifies a unique entry in the copyTable. A management station wishing to initiate a config-copy operation should use a random value for this object when creating or modifying an instance of a copyEntry. The RowStatus semantics of the copyEntryRowStatus object will prevent access conflicts.
STR zxr10FSCopySrcFileName	1.3.6.1.4.1.3902.3.6000.5.4.1.2	DisplayString	read-create	The source file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType has the value networkFile or localFile.
STR zxr10FSCopySrcCpuNode	1.3.6.1.4.1.3902.3.6000.5.4.1.3	DisplayString	read-create	The cpu-node of source file.
STR zxr10FSCopyDstFileName	1.3.6.1.4.1.3902.3.6000.5.4.1.4	DisplayString	read-create	The destination file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType has the value networkFile or localFile.
STR zxr10FSCopyDstCpuNode	1.3.6.1.4.1.3902.3.6000.5.4.1.5	DisplayString	read-create	The cpu-node of destination file.
T/F zxr10FSCopyNotificationOnCompletion	1.3.6.1.4.1.3902.3.6000.5.4.1.6	TruthValue	read-create	Specifies whether or not a copyCompletion notification should be issued on completion of copy . If such a notification is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
FSC zxr10FSCopyState	1.3.6.1.4.1.3902.3.6000.5.4.1.7	FSCopyState	read-only	Specifies the state of this config-copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the copyEntryRowStatus has been made active.
TIM zxr10FSCopyTimeStarted	1.3.6.1.4.1.3902.3.6000.5.4.1.8	TimeStamp	read-only	Specifies the time the copyState last transitioned to running, or 0 if the state has never transitioned to running (for e.g., stuck in waiting state). This object is instantiated only after the row has been instantiated.
TIM zxr10FSCopyTimeCompleted	1.3.6.1.4.1.3902.3.6000.5.4.1.9	TimeStamp	read-only	Specifies the time the copyState last transitioned from running to successful or failed states. This object is instantiated only after the row has been instantiated. Its value will remain 0 until he request has completed.
FSC zxr10FSCopyFailCause	1.3.6.1.4.1.3902.3.6000.5.4.1.10	FSCopyFailCause	read-only	The reason why the config-copy operation failed. This object is instantiated only when the copyState for this entry is in the failed state.
ROW zxr10FSCopyRowStatus	1.3.6.1.4.1.3902.3.6000.5.4.1.11	RowStatus	read-create	The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (copyState transitions to successful or failed state).
zxr10FSCopyMIBTraps	1.3.6.1.4.1.3902.3.6000.5.5
NTF zxr10FSCopyCompletion	1.3.6.1.4.1.3902.3.6000.5.5.1			A copyCompletion trap is sent at the completion of a config-copy request. The copyFailCause is not instantiated, and hence not included in a trap, when the copyState is success.

RFC description

Manages ZTE ZXR10 router file system operations including storage capacity and file transfer management.

Start monitoring ZTE ZXR10 (T8000 series) router (flash/CF storage capacity/presence status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-FILE-SYSTEM-MIB

What Is ZXR10-FILE-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description