ZXR10-MPLS-L2VPN-STATIS

All MIBs › ZXR10-MPLS-L2VPN-STATIS

Organization: ZTE Corporation

Last Updated: 2005-07-26

Category: ZTE ZXR10 L2VPN and L3VPN

Description: Provides ZTE ZXR10 MPLS L2VPN traffic statistics including throughput and packet counters per service.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MPLS-L2VPN-STATIS?

ZXR10-MPLS-L2VPN-STATIS is a ZTE private MIB for the ZXR10 ZXROS platform that provides query and configuration objects for MPLS Layer 2 VPN traffic statistics. It exposes performance-counter data such as per-service throughput and packet counters for pseudowires/L2VPN instances rather than static configuration alone. Its primary monitoring use is tracking the ongoing traffic load and health of individual L2VPN services, letting an operator spot a service with abnormally low or zero throughput, which often signals a pseudowire or forwarding-path fault. It depends on the underlying MPLS L2VPN/pseudowire signaling MIBs that establish the services being counted, since the statistics here are keyed to those service identifiers. It is typically deployed on ZTE ZXR10 provider-edge routers delivering Ethernet or other L2VPN services across an MPLS backbone. Engineers can download the ZXR10-MPLS-L2VPN-STATIS file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MPLS-L2VPN-STATIS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 MPLS provider-edge router

Monitoring Examples

No sample runtime objects were provided for this module, so specific table/object names cannot be cited; conceptually, an operator would poll per-L2VPN-service throughput and packet counters to build a baseline and detect deviations. A service whose packet counters stop incrementing while others continue would indicate a broken pseudowire or misrouted traffic for that specific L2VPN instance.

What Can Be Monitored

per-service L2VPN throughput
L2VPN packet counters
pseudowire traffic statistics

Imported Objects

From RFC1155-SMI

IpAddress

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

From ZXR10-SMI

zxr10L2vpn

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxr10L2vpnStatisRecvPkts OID:

Select a ZTE ZXR10 MPLS provider-edge router (per-L2VPN-service throughput/packet-counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10L2vpnStatisRecvPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The received packets count of the instance. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10MplsL2vpnStatisMIB	1.3.6.1.4.1.3902.3.104.6			ZXROS v4.6.03 Mpls L2vpn query and configuration MIB
zxr10L2vpnStatisObjects	1.3.6.1.4.1.3902.3.104.6.1
zxr10L2vpnStatisTable	1.3.6.1.4.1.3902.3.104.6.1.1		not-accessible	Mpls L2vpn instance query table
zxr10L2vpnStatisEntry	1.3.6.1.4.1.3902.3.104.6.1.1.1		not-accessible	Information of Mpls L2vpn instance configured on a PE
STR zxr10L2vpnStatisVpnName	1.3.6.1.4.1.3902.3.104.6.1.1.1.2	DisplayString	read-only
C64 zxr10L2vpnStatisRecvPktsEx	1.3.6.1.4.1.3902.3.104.6.1.1.1.3	Counter64	read-only
C64 zxr10L2vpnStatisRecvBytes	1.3.6.1.4.1.3902.3.104.6.1.1.1.4	Counter64	read-only
C64 zxr10L2vpnStatisSndPkts	1.3.6.1.4.1.3902.3.104.6.1.1.1.5	Counter64	read-only
C64 zxr10L2vpnStatisSndBytes	1.3.6.1.4.1.3902.3.104.6.1.1.1.6	Counter64	read-only
zxr10L2vpnStatisVcTable	1.3.6.1.4.1.3902.3.104.6.1.2		not-accessible
zxr10L2vpnStatisVcEntry	1.3.6.1.4.1.3902.3.104.6.1.2.1		not-accessible	Information of Mpls L2vpn instance configured on a PE
U32 zxr10L2vpnStatisVCID	1.3.6.1.4.1.3902.3.104.6.1.2.1.1	Unsigned32	read-only
IP zxr10L2vpnStatisVcPeerAddr	1.3.6.1.4.1.3902.3.104.6.1.2.1.2	IpAddress	read-only
C64 zxr10L2vpnStatisVcRecvPkts	1.3.6.1.4.1.3902.3.104.6.1.2.1.3	Counter64	read-only
C64 zxr10L2vpnStatisVcRecvBytes	1.3.6.1.4.1.3902.3.104.6.1.2.1.4	Counter64	read-only
C64 zxr10L2vpnStatisVcSndPkts	1.3.6.1.4.1.3902.3.104.6.1.2.1.5	Counter64	read-only
C64 zxr10L2vpnStatisVcSndBytes	1.3.6.1.4.1.3902.3.104.6.1.2.1.6	Counter64	read-only

RFC description

Vendor-private MIB for ZTE ZXR10 platform; provides statistics and performance metrics for MPLS and Layer 2 VPN services.

Start monitoring ZTE ZXR10 MPLS provider-edge router (per-L2VPN-service throughput/packet-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MPLS-L2VPN-STATIS