ZTE-AN-FILE-MIB

All MIBs › ZTE-AN-FILE-MIB

Organization: ZTE Corporation

Last Updated: 2011-05-26

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node file system operations including file transfer, storage, and software image management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-FILE-MIB?

ZTE-AN-FILE-MIB is a ZTE-proprietary module for managing file operations on ZTE Access Node (AN) broadband access equipment, such as DSLAM and OLT platforms used in carrier access networks. It exposes objects for controlling file transfer sessions (e.g., TFTP/FTP-based uploads and downloads), file storage locations, and software image management on the device's local file system. The module supports monitoring the hardware and software status of the access node indirectly through file transfer state, transfer success/failure results, and software image version and validity, which administrators use to confirm that firmware upgrades and configuration backups completed correctly. It is a standalone vendor module with no strong dependency on other MIBs beyond standard SNMP conventions. It is typically deployed by carriers running ZTE access nodes to automate and verify remote firmware upgrades and configuration file distribution. Engineers can download the ZTE-AN-FILE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-FILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access-network (ZXA10) equipment

Monitoring Examples

Since sample_objects for this MIB were not provided, the concrete object names cannot be grounded from source data, but based on the module description an admin would typically poll file-transfer-state and transfer-result style objects (e.g., a file transfer status table) to confirm whether a firmware image push to a ZTE Access Node completed successfully. An anomaly such as a stuck or failed transfer status would indicate a failed firmware upgrade attempt. This MIB should be treated as a file/software management module rather than a general performance-counter MIB.

What Can Be Monitored

file transfer status
firmware/software image upload result
file storage state
software image management operations

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

From ZTE-AN-SMI

zxAccessNode	MODULE-IDENTITY
zxAnSystem	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnFileMib	1.3.6.1.4.1.3902.1082.20.50			This MIB defines zte Access Node software management.
zxAnFileGlobalObjects	1.3.6.1.4.1.3902.1082.20.50.1
BIT zxAnFileMgmtCapabilities	1.3.6.1.4.1.3902.1082.20.50.1.1	Bits	read-only	The file management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. supportDownloadFileToSdCard(0): value 1 means zxAnFileFtpDestStorageDevId is supported. NOTE: Not recommended to display it in NMS.
INT zxAnFileLoadDefaultConfiguration	1.3.6.1.4.1.3902.1082.20.50.1.2	INTEGER	read-write	Use this parameter to load default Configuration.
zxAnFileObjects	1.3.6.1.4.1.3902.1082.20.50.2
zxAnFileFtpOperObjects	1.3.6.1.4.1.3902.1082.20.50.2.1
zxAnFileFtpOperGlobalObjects	1.3.6.1.4.1.3902.1082.20.50.2.1.1
INT zxAnFileFtpFileType	1.3.6.1.4.1.3902.1082.20.50.2.1.1.1	INTEGER	read-write	The ftp client function is used to implement the transmission of file between an agent and a manager.
INT zxAnFileFtpOperType	1.3.6.1.4.1.3902.1082.20.50.2.1.1.2	INTEGER	read-write	UpLoad: put file to NMS ftp server.. DownLoad: get file from NMS ftp server.
INT zxAnFileFtpAction	1.3.6.1.4.1.3902.1082.20.50.2.1.1.3	INTEGER	read-write	Ftp administrative status.
IPt zxAnFileFtpSvrIpAddressType	1.3.6.1.4.1.3902.1082.20.50.2.1.1.4	InetAddressType	read-write	IP address type of the file server.
IP zxAnFileFtpSvrIpAddress	1.3.6.1.4.1.3902.1082.20.50.2.1.1.5	InetAddress	read-write	The IP Address for the FTP server used for downloading and/or uploading files.
STR zxAnFileFtpSvrUserName	1.3.6.1.4.1.3902.1082.20.50.2.1.1.6	DisplayString	read-write	The FTP username.
STR zxAnFileFtpSvrUserPwd	1.3.6.1.4.1.3902.1082.20.50.2.1.1.7	DisplayString	read-write	The FTP User Password.
INT zxAnFileFtpSvrProtocolType	1.3.6.1.4.1.3902.1082.20.50.2.1.1.8	INTEGER	read-write	The flag is used for indicating the ftp protocol when downing versions between EMS and NE.It include two protocols:one is ftp and another is sftp.
STR zxAnFileFtpSvrFilePath	1.3.6.1.4.1.3902.1082.20.50.2.1.1.9	DisplayString	read-write	The FTP file path which starts from the root directory.
STR zxAnFileFtpSvrFileName	1.3.6.1.4.1.3902.1082.20.50.2.1.1.10	DisplayString	read-write	The FTP file name.
I32 zxAnFileFtpDestStorageDevId	1.3.6.1.4.1.3902.1082.20.50.2.1.1.11	Integer32	read-write	The ID of the FTP destination storage device of the main control card. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ...
DAT zxAnFileFtpFileRetrieveStartTime	1.3.6.1.4.1.3902.1082.20.50.2.1.1.21	DateAndTime	read-write	Specifies the start of the time for which the selected PM measurements shall be retrieved (this parameter only applies for the retrieval of historical PM data).
DAT zxAnFileFtpFileRetrieveEndTime	1.3.6.1.4.1.3902.1082.20.50.2.1.1.22	DateAndTime	read-write	Specifies the end of the time for which the selected PM measurements shall be retrieved (this parameter only applies for the retrieval of historical PM data).
INT zxAnFileFtpPerfLogType	1.3.6.1.4.1.3902.1082.20.50.2.1.1.30	INTEGER	read-write	The time granularity of performance data files retrieval.
INT zxAnFileFtpOperStatus	1.3.6.1.4.1.3902.1082.20.50.2.1.1.50	INTEGER	read-only	Ftp operational status.
STR zxAnFileFtpCurrFileName	1.3.6.1.4.1.3902.1082.20.50.2.1.1.51	DisplayString	read-only	The name of current file which is downloading or uploading.
I32 zxAnFileFtpCurrFileSize	1.3.6.1.4.1.3902.1082.20.50.2.1.1.52	Integer32	read-only	The size of current file which is downloading or uploading.
INT zxAnFileFtpCurrFileProgress	1.3.6.1.4.1.3902.1082.20.50.2.1.1.53	INTEGER	read-only	The total progress of upload or download version , including master and slave card.
I32 zxAnFileFtpTotalFiles	1.3.6.1.4.1.3902.1082.20.50.2.1.1.54	Integer32	read-only	Total count of files will be downloaded or uploaded.
I32 zxAnFileFtpSuccessFiles	1.3.6.1.4.1.3902.1082.20.50.2.1.1.55	Integer32	read-only	Count of files which are downloaded or uploaded successfully.
INT zxAnFileFtpFailedReason	1.3.6.1.4.1.3902.1082.20.50.2.1.1.56	INTEGER	read-only	Ftp failed reason.
INT zxAnFileFtpFinishedNotify	1.3.6.1.4.1.3902.1082.20.50.2.1.1.80	INTEGER	read-write	Use this parameter to notify the agent that the FTP transfer has been finished. To query this object, always return 1.
STR zxAnFileFtpVrfName	1.3.6.1.4.1.3902.1082.20.50.2.1.1.81	DisplayString	read-write	The VRF name. Setting an empty string is not supported. To query this object, always return an empty string.
zxAnFileSoftwareObjects	1.3.6.1.4.1.3902.1082.20.50.2.2
zxAnFileTable	1.3.6.1.4.1.3902.1082.20.50.2.2.2		not-accessible	A table entry containing file information .
zxAnFileEntry	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1		not-accessible	An entry of zxAnFileTable
I32 zxAnFileRack	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.1	Integer32	not-accessible
I32 zxAnFileShelf	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.2	Integer32	not-accessible
I32 zxAnFileSlot	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.3	Integer32	not-accessible
I32 zxAnFileDevId	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.4	Integer32	not-accessible	The ID of the storage device. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ...
INT zxAnFileType	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.5	INTEGER	not-accessible	The type of the file.
STR zxAnFileName	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.6	DisplayString	not-accessible	File name.
I32 zxAnFileSize	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.7	Integer32	read-only	File size.
DAT zxAnFileModifyTime	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.8	DateAndTime	read-only	The last file modification time.The format is yyyy-mm-dd HH:MM:SS.For example, 2001-01-01 02:22:33
INT zxAnFileStorageDevType	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.9	INTEGER	read-only	The type of the device.
INT zxAnFileOperation	1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.15	INTEGER	read-write	The file operation type. This object is only used to erase the software file and the patch file.
zxAnFileSyncObjects	1.3.6.1.4.1.3902.1082.20.50.2.2.10
zxAnFileSyncGlobalObjects	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1
I32 zxAnFileSyncRack	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.1	Integer32	read-write
I32 zxAnFileSyncShelf	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.2	Integer32	read-write
INT zxAnFileSyncFileType	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.3	INTEGER	read-write	The type of the file.
STR zxAnFileSyncFileName	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.4	DisplayString	read-write	File name.
INT zxAnFileSyncOperation	1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.15	INTEGER	read-write	Adminstrative status of file or folder.
zxAnFileSyncStatusTable	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2		not-accessible	A table entry containing status information of files synchronization from master card to slave card.
zxAnFileSyncStatusEntry	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1		not-accessible	An entry of zxAnFileSyncStatusTable.
INT zxAnFileSyncStatus	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.2	INTEGER	read-only	Status of synchronization file from master card to slave card.
INT zxAnFileSyncProgress	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.3	INTEGER	read-only	The total progress of sync file.
INT zxAnFileSyncFailedReason	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.4	INTEGER	read-only	The failed reason of synchronization file from master card to slave card.
INT zxAnFileSyncDevType	1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.5	INTEGER	read-only	The type of the device.
zxAnFileExplorerObjects	1.3.6.1.4.1.3902.1082.20.50.2.3
zxAnFileExplorerGlobalObjects	1.3.6.1.4.1.3902.1082.20.50.2.3.1
STR zxAnFileExplorerSourceFile	1.3.6.1.4.1.3902.1082.20.50.2.3.1.1	DisplayString	read-write	The source file. The format is: 'rack/shelf/slot/devType/devId/directory/file'.
STR zxAnFileExplorerDestinationDir	1.3.6.1.4.1.3902.1082.20.50.2.3.1.2	DisplayString	read-write	The destination directory. The format is: 'rack/shelf/slot/devType/devId/directory'. If the zxAnFileExplorerOperation is 'delete' or 'rename', this object will be set to empty string.
STR zxAnFileExplorerRenamedName	1.3.6.1.4.1.3902.1082.20.50.2.3.1.3	DisplayString	read-write	The renamed name. If the zxAnFileExplorerOperation is 'delete', this object will be set to empty string. If the zxAnFileExplorerOperation is 'copy' and this object is not empty string, the source file name will be changed to the zxAnFileExplorerRenamedName after the copying operation. If the zxAnFileExplorerOperation is 'copy' and this object is empty string, the source file name will not be changed after the copy operation. If the zxAnFileExplorerOperation is 'rename', this object means the renamed name.
INT zxAnFileExplorerOperation	1.3.6.1.4.1.3902.1082.20.50.2.3.1.4	INTEGER	read-write	The file operation type.
INT zxAnFileExplorerOperStatus	1.3.6.1.4.1.3902.1082.20.50.2.3.1.5	INTEGER	read-only	The status of the file operation.
I32 zxAnFileExplorerOperProgress	1.3.6.1.4.1.3902.1082.20.50.2.3.1.6	Integer32	read-only	The progress of the file operation.
INT zxAnFileExplorerOperFailedReason	1.3.6.1.4.1.3902.1082.20.50.2.3.1.7	INTEGER	read-only	The failed reasion of the file operation.
zxAnFileListTable	1.3.6.1.4.1.3902.1082.20.50.2.3.2		not-accessible	The file list table. This table is added to support the new index of the NE files: 'rack-shelf-slot-devType-devId-directory-name'.
zxAnFileListEntry	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1		not-accessible	An entry of zxAnFileListTable.
I32 zxAnFileListRack	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.1	Integer32	not-accessible	The rack number.
I32 zxAnFileListShelf	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.2	Integer32	not-accessible	The shelf number.
I32 zxAnFileListSlot	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.3	Integer32	not-accessible	The slot number.
INT zxAnFileListDevType	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.4	INTEGER	not-accessible	The device type. 1 means flash; 2 means SD card.
I32 zxAnFileListDevId	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.5	Integer32	not-accessible	The device ID. This object is not used now.
STR zxAnFileListDirectory	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.6	DisplayString	not-accessible	The full directory of the file.
STR zxAnFileListName	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.7	DisplayString	not-accessible	The file name.
I32 zxAnFileListSize	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.8	Integer32	read-only	The file size.
DAT zxAnFileListWriteTime	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.9	DateAndTime	read-only	The write time of the file.
BIT zxAnFileListPermissions	1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.10	Bits	read-only	The access permissions of the file.
zxAnFileNotifications	1.3.6.1.4.1.3902.1082.20.50.3
zxAnFileFtpOperTraps	1.3.6.1.4.1.3902.1082.20.50.3.1
NTF zxAnFileFtpDownloadFinished	1.3.6.1.4.1.3902.1082.20.50.3.1.1			A zxAnFileFtpDownloadFinished is sent when the agent has detected that the File download is finished.
NTF zxAnFileFtpUploadFinished	1.3.6.1.4.1.3902.1082.20.50.3.1.2			A zxAnFileFtpUploadFinished is sent when the agent has detected that the File upload is finished.
zxAnFileConformance	1.3.6.1.4.1.3902.1082.20.50.4
zxAnFileCompliances	1.3.6.1.4.1.3902.1082.20.50.4.1
zxAnFileCompliance	1.3.6.1.4.1.3902.1082.20.50.4.1.1			The compliance statement for SNMP entities which implement the ZTE-AN-SOFTWARE-MIB.
zxAnFileGroups	1.3.6.1.4.1.3902.1082.20.50.4.2
zxAnFileLoadDefConfGroup	1.3.6.1.4.1.3902.1082.20.50.4.2.1			The collection of objects which are used to to load default Configuration.
zxAnFileFtpOperGroup	1.3.6.1.4.1.3902.1082.20.50.4.2.2			The collection of objects which are used to implement transmission of file between an agent and a manager (download & upload).
zxAnFileMgmtGroup	1.3.6.1.4.1.3902.1082.20.50.4.2.3			The collection of objects which are used to implement file management such as display attribute of file, delete file, synchronize file to slave board.
zxAnFileSyncGroup	1.3.6.1.4.1.3902.1082.20.50.4.2.4			The collection of objects which are used to implement file synchronization.
zxAnFileNotificationsGroup	1.3.6.1.4.1.3902.1082.20.50.4.2.10			The notifications which indicate specific changes, include file upload/download finished.

RFC description

Manages software file operations on ZTE access nodes including file downloads, FTP operations and synchronization.

Start monitoring ZTE access-network equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-FILE-MIB

What Is ZTE-AN-FILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description