All MIBs › ZXR10-TACPLUS-MIB
Organization: ZTE Corporation
Last Updated: 2013-10-14
Category: ZTE ZXR10 Security and Access Control
Description: Manages ZTE ZXR10 TACACS+ server configuration for centralized device administration authentication and accounting.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-TACPLUS-MIB?
ZXR10-TACPLUS-MIB is a ZTE proprietary MIB for ZXR10 devices that manages TACACS+ (Terminal Access Controller Access-Control System Plus) server configuration, used for centralized authentication, authorization, and accounting of administrative device access. Its data falls into the configuration category: global TACACS+ settings (shared key, packet type, timeout, source IP) and a table of individual TACACS+ server entries with their address, VRF, port, key, and timeout. In monitoring terms this MIB is used to verify AAA software configuration correctness -- confirming the right TACACS+ servers are configured and reachable parameters (timeout, port) are set as expected -- which is important for ensuring administrators can still authenticate to the device, rather than for hardware environmental monitoring. It depends conceptually on the TACACS+ protocol standard (RFC-adjacent, though not formally an IETF standards-track RFC) and the device's VRF-aware networking stack. It is typically deployed in enterprise or carrier environments where centralized AAA servers control administrative access to ZXR10 network equipment. Engineers can download the ZXR10-TACPLUS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-TACPLUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 router/switch
Monitoring Examples
An admin would poll zxr10TacacsServerTable/zxr10TacacsServerEntry to review each configured TACACS+ server's zxr10TacacsServerAddress, zxr10TacacsServerPort, and zxr10TacacsServerTimeout, confirming that the primary and backup AAA servers are correctly defined. The global objects zxr10TacacsGlobalKey and zxr10TacacsGlobalTimeout let an operator verify shared-secret and timeout settings match what the TACACS+ server infrastructure expects, and zxr10TacacsStatus indicates whether TACACS+ authentication is currently enabled on the device. A misconfigured zxr10TacacsServerVrfname could explain why the device fails to reach its AAA server in a VRF-segmented network.
What Can Be Monitored
- TACACS+ feature enable status
- configured TACACS+ server addresses
- TACACS+ server port and timeout
- shared key and global timeout settings
- per-VRF TACACS+ server reachability configuration
Imported Objects
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION |
From ZXR10-SMI
| zxr10 | OBJECT-IDENTITY |
OIDs
RFC description
Manages TACACS+ authentication protocol configuration and server group settings for ZXR10 network equipment.
Start monitoring ZTE ZXR10 router/switch (TACACS+ server address/timeout/key config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.