All MIBs › ZXROSNG-TPOAM-MIB
Organization: ZTE Corporation
Last Updated: 2015-05-25
Category: ZXROSNG Next-Generation Transport
Description: Defines ZTE ZXROSNG Transport Profile OAM configuration for Y.1731 performance monitoring and fault management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXROSNG-TPOAM-MIB?
ZXROSNG-TPOAM-MIB is a ZTE proprietary module for the ZXROSNG transport platform implementing Transport Profile OAM based on ITU-T Y.1731, covering Ethernet performance monitoring and fault management for carrier Ethernet services. It exposes configuration for maintenance entities/points and monitoring objects for continuity check, loss/delay measurement, and fault/alarm indication. This gives an administrator direct visibility into the software/service health of Ethernet transport paths: continuity-check failures reveal connectivity faults, and delay/loss measurements reveal degrading service performance before it becomes a customer-visible outage. It is built directly on the ITU-T Y.1731 (and related G.8013/MEF) Ethernet OAM standard. It is deployed in ZTE carrier Ethernet/transport network elements running ZXROSNG software that need standards-based end-to-end service assurance. Engineers can download the ZXROSNG-TPOAM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXROSNG-TPOAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXROSNG transport/carrier Ethernet network elements
Monitoring Examples
No specific object names were captured in sample_objects, but consistent with its Y.1731 basis the module would expose maintenance-entity tables along with continuity-check status and delay/loss-measurement result objects. An administrator would poll the continuity-check status for a maintenance association to detect a connectivity fault, and trend the delay-measurement results to catch service degradation on a carrier Ethernet path before customers notice.
What Can Be Monitored
- maintenance entity/association configuration
- continuity-check fault status
- frame delay measurement
- frame loss measurement
- OAM alarm indication
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zte | 1.3.6.1.4.1.3902 | ZXROS SMI MIB | ||
| zxr10 | 1.3.6.1.4.1.3902.3 | Zxr10 is the root OBJECT IDENTIFIER for ZTE routers and switches pruducts | ||
| zxr10RosngMIB | 1.3.6.1.4.1.3902.3.6000 | Subtree beneath which ROSNG MIBS were built. | ||
| zxTPOAMModules | 1.3.6.1.4.1.3902.3.6000.202 | Subtree beneath which zxTPOAMModules MIBS were built. | ||
| U32 zxTPOAMChannelType | 1.3.6.1.4.1.3902.3.6000.202.1 | Unsigned32 | read-only | The identity of Y.1731 packet in G-ACH Label (default:32762). |
| U32 zxTPOAMMel | 1.3.6.1.4.1.3902.3.6000.202.2 | Unsigned32 | read-only | The value of MEL field in OAM packets(default: 7). |
| INT zxTPOAMGlobalEnable | 1.3.6.1.4.1.3902.3.6000.202.3 | INTEGER | read-only | The global enable switch(default: enable). |
| U32 zxTPOAMTc | 1.3.6.1.4.1.3902.3.6000.202.4 | Unsigned32 | read-only | The value of TC field in the label of GAL(default:7). |
| INT zxTPOAMRdiToSF | 1.3.6.1.4.1.3902.3.6000.202.5 | INTEGER | read-only | This switch is used to transform the RDI alarm to SF alarm (default:disable). |
| zxTPOAMSectionConfigTable | 1.3.6.1.4.1.3902.3.6000.202.6 | not-accessible | The configuration table in the instance of SECTION. | |
| zxTPOAMSectionConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.6.1 | not-accessible | An entry containing management information applicable to a particular instance of SECTION | |
| U32 zxTPOAMSectionConfigSectionID | 1.3.6.1.4.1.3902.3.6000.202.6.1.1 | Unsigned32 | not-accessible | SECTION ID used to identify the SECTION entity. |
| STR zxTPOAMSectionConfigLocalPort | 1.3.6.1.4.1.3902.3.6000.202.6.1.2 | DisplayString | read-only | Local port bind the SECTION,and the port support GEI/FEI/VLAN subinterface/the third layer's vlan port/sg aggregation port/sg subinterface. The limits of configuration:1)the port must locate in the third lay 2)one port can't bind one more ports |
| IP zxTPOAMSectionConfigPeerIp | 1.3.6.1.4.1.3902.3.6000.202.6.1.3 | IpAddress | read-only | Peer ip address bind the SECTION. |
| INT zxTPOAMSectionConfigSdEnable | 1.3.6.1.4.1.3902.3.6000.202.6.1.4 | INTEGER | read-only | SECTION layer sd enable flag:1 disable,2 enable,default value is disable. |
| zxTPOAMTunnelEntityStaConfigTable | 1.3.6.1.4.1.3902.3.6000.202.7 | not-accessible | The configuration table in the instance of TUNNEL. | |
| zxTPOAMTunnelEntityStaConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.7.1 | not-accessible | An entry containing management information applicable to a particular instance of TUNNEL. | |
| U32 zxTPOAMTunnelEntityStaCTunnelID | 1.3.6.1.4.1.3902.3.6000.202.7.1.1 | Unsigned32 | not-accessible | The TUNNEL ID only applies to the bidirectional static TUNNEL. The range of this parameter depend on the device. |
| U32 zxTPOAMTunnelEntityStaCLspid | 1.3.6.1.4.1.3902.3.6000.202.7.1.2 | Unsigned32 | not-accessible | The identity of the static LSP |
| U32 zxTPOAMTunnelEntityStaCMegIndex | 1.3.6.1.4.1.3902.3.6000.202.7.1.3 | Unsigned32 | read-only | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| INT zxTPOAMTunnelEntityStaCPropagate | 1.3.6.1.4.1.3902.3.6000.202.7.1.4 | INTEGER | read-only | The propagating switch of the entity |
| zxTPOAMTunnelEntityDynConfigTable | 1.3.6.1.4.1.3902.3.6000.202.8 | not-accessible | The configuration table in the instance of dynamic TUNNEL. | |
| zxTPOAMTunnelEntityDynConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.8.1 | not-accessible | An entry containing management information applicable to a particular instance of dynamic TUNNEL. | |
| U32 zxTPOAMTunnelEntityDynCTunnelID | 1.3.6.1.4.1.3902.3.6000.202.8.1.1 | Unsigned32 | not-accessible | TUNNEL ID. The range of this parameter depend on the device. |
| INT zxTPOAMTunnelEntityDynCLspRole | 1.3.6.1.4.1.3902.3.6000.202.8.1.2 | INTEGER | not-accessible | The identity of dynamic LSP which including two roles: master and backup |
| U32 zxTPOAMTunnelEntityDynCMegIndex | 1.3.6.1.4.1.3902.3.6000.202.8.1.3 | Unsigned32 | read-only | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| zxTPOAMPWEntityConfigTable | 1.3.6.1.4.1.3902.3.6000.202.9 | not-accessible | The configuration table in the instance of PW. | |
| zxTPOAMPWEntityConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.9.1 | not-accessible | An entry containing management information applicable to a particular instance of PW. | |
| STR zxTPOAMPWEntityPWName | 1.3.6.1.4.1.3902.3.6000.202.9.1.1 | DisplayString | not-accessible | The PW name |
| U32 zxTPOAMPWEntityMegIndex | 1.3.6.1.4.1.3902.3.6000.202.9.1.2 | Unsigned32 | read-only | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| zxTPOAMSectionEntityConfigTable | 1.3.6.1.4.1.3902.3.6000.202.10 | not-accessible | The configuration table in the instance of SECTION. | |
| zxTPOAMSectionEntityConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.10.1 | not-accessible | An entry containing management information applicable to a particular instance of SECTION. | |
| U32 zxTPOAMSectionEntitySectionID | 1.3.6.1.4.1.3902.3.6000.202.10.1.1 | Unsigned32 | not-accessible | SECTION ID |
| U32 zxTPOAMSectionEntityMegIndex | 1.3.6.1.4.1.3902.3.6000.202.10.1.2 | Unsigned32 | read-only | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| INT zxTPOAMSectionEntityPropagate | 1.3.6.1.4.1.3902.3.6000.202.10.1.3 | INTEGER | read-only | The propagating switch of the entity |
| zxTPOAMMegConfigTable | 1.3.6.1.4.1.3902.3.6000.202.11 | not-accessible | The configuration table of MEG. | |
| zxTPOAMMegConfigEntry | 1.3.6.1.4.1.3902.3.6000.202.11.1 | not-accessible | An entry containing management information applicable to a particular MEG. | |
| U32 zxTPOAMMegConfigIndex | 1.3.6.1.4.1.3902.3.6000.202.11.1.1 | Unsigned32 | not-accessible | MEG index |
| STR zxTPOAMMegConfigMegID | 1.3.6.1.4.1.3902.3.6000.202.11.1.2 | DisplayString | read-only | MEG identity name |
| INT zxTPOAMMegConfigOAMEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.3 | INTEGER | read-only | The OAM enable switch under MEG model.(default :disable) |
| INT zxTPOAMMegConfigCCEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.4 | INTEGER | read-only | The CC enable switch (this switch only enable in the case of peer mep and local mep with full configuration) |
| INT zxTPOAMMegConfigCVEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.5 | INTEGER | read-only | The CV enable switch |
| INT zxTPOAMMegConfigCVPeriod | 1.3.6.1.4.1.3902.3.6000.202.11.1.6 | INTEGER | read-only | The sending period of CV packets |
| INT zxTPOAMMegConfigCVPhbName | 1.3.6.1.4.1.3902.3.6000.202.11.1.7 | INTEGER | read-only | The PHB value in CV sending packets.(default :cs7) |
| INT zxTPOAMMegConfigAISEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.8 | INTEGER | read-only | The AIS enable switch(The function of AIS is enabled only in the instance of lsp or pw) |
| INT zxTPOAMMegConfigAISPhb | 1.3.6.1.4.1.3902.3.6000.202.11.1.9 | INTEGER | read-only | The PHB value in AIS sending packets.(default :cs7) |
| INT zxTPOAMMegConfigCSFEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.10 | INTEGER | read-only | The switch of CSF.(The function of CSF is enabled only in the instance of pw) |
| INT zxTPOAMMegConfigCSFPhb | 1.3.6.1.4.1.3902.3.6000.202.11.1.11 | INTEGER | read-only | The PHB value in CSF sending packets.(default :cs7) |
| INT zxTPOAMMegConfigLocalMepType | 1.3.6.1.4.1.3902.3.6000.202.11.1.12 | INTEGER | read-only | Local MEP type :source MEP/destination MEP/bidirectional MEP.The configuration of MEP and MIP is mutual exclusive. |
| U32 zxTPOAMMegConfigLocalMepID | 1.3.6.1.4.1.3902.3.6000.202.11.1.13 | Unsigned32 | read-only | Lhe identity of local MEP.0 is invalid and it means that have not configed MEP. |
| INT zxTPOAMMegConfigPeerMepType | 1.3.6.1.4.1.3902.3.6000.202.11.1.14 | INTEGER | read-only | The type of peer MEP including source MEP,destination MEP and bidirectional MEP. |
| U32 zxTPOAMMegConfigPeerlMepID | 1.3.6.1.4.1.3902.3.6000.202.11.1.15 | Unsigned32 | read-only | The identity of peer MEP.0 is invalid and it means that have not configed peer MEP. |
| U32 zxTPOAMMegConfigMipID | 1.3.6.1.4.1.3902.3.6000.202.11.1.16 | Unsigned32 | read-only | The identity of MIP.0 is invalid and it means that have not configed MIP. |
| INT zxTPOAMMegConfigMipUpDown | 1.3.6.1.4.1.3902.3.6000.202.11.1.17 | INTEGER | read-only | The MIP attribute including UP and DOWN is available only when the value of zxTPOAMMegConfigMipID is not 0 |
| INT zxTPOAMMegConfigProactiveLmEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.18 | INTEGER | read-only | The switch of proactive LM.(default: disable) |
| INT zxTPOAMMegConfigSdEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.19 | INTEGER | read-only | The switch of SD alarm function.(default :disable) (even if the loss ratio runs over the threshold, there is no SD alarm without this configuration) |
| U32 zxTPOAMMegConfigLossPktThresholdMantissa | 1.3.6.1.4.1.3902.3.6000.202.11.1.20 | Unsigned32 | read-only | The configuration of loss ratio threshold(This field displays the manitissa in E-notation)(default: 5) |
| U32 zxTPOAMMegConfigLossPktThresholdExponent | 1.3.6.1.4.1.3902.3.6000.202.11.1.21 | Unsigned32 | read-only | The configuration of loss ratio threshold(This field displays the exponent in E-notation)(default: 5) |
| INT zxTPOAMMegConfigLCKEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.22 | INTEGER | read-only | The switch of LCK.(default: disable) |
| U32 zxTPOAMMegConfigTunnelID | 1.3.6.1.4.1.3902.3.6000.202.11.1.23 | Unsigned32 | read-only | The node identified the TUNNEL ID if MEG binding the static or dynamic tunnels.0 is invalid. The range of this parameter depending on the device. |
| U32 zxTPOAMMegConfigLspid | 1.3.6.1.4.1.3902.3.6000.202.11.1.24 | Unsigned32 | read-only | the node identified the static tunnel if MEG binding the static tunnels.0 is invalid |
| INT zxTPOAMMegConfigLspRole | 1.3.6.1.4.1.3902.3.6000.202.11.1.25 | INTEGER | read-only | The node identified the dynamic tunnel if MEG binding the dynamic tunnels.The LSP acts as master or backup.0 is invalid |
| STR zxTPOAMMegConfigPWName | 1.3.6.1.4.1.3902.3.6000.202.11.1.26 | DisplayString | read-only | The node identified the PW name if MEG binding the instance of PW. Null is invalid |
| U32 zxTPOAMMegConfigSectionID | 1.3.6.1.4.1.3902.3.6000.202.11.1.27 | Unsigned32 | read-only | The node identified the SECTION ID if MEG binding the instace of SECTION.0 is invalid |
| INT zxTPOAMMegConfigProactiveLmType | 1.3.6.1.4.1.3902.3.6000.202.11.1.28 | INTEGER | read-only | Proactive LM adopts protocol type: G.8114,counting the data packets; Y.1731,counting the data packets and OAM packets. |
| INT zxTPOAMMegConfigPaDMEnable | 1.3.6.1.4.1.3902.3.6000.202.11.1.29 | INTEGER | read-only | The switch of proactive DM.(default: disable) |
| INT zxTPOAMMegConfigPaDMType | 1.3.6.1.4.1.3902.3.6000.202.11.1.30 | INTEGER | read-only | The type of proactive DM.(default: oneway) |
| INT zxTPOAMMegConfigPaDMPhb | 1.3.6.1.4.1.3902.3.6000.202.11.1.31 | INTEGER | read-only | the PHB value in DM sending packets.(default: cs7) |
| U32 zxTPOAMMegConfigPaDMSendInterval | 1.3.6.1.4.1.3902.3.6000.202.11.1.32 | Unsigned32 | read-only | Sending intervals in the function of proactive DM. (sending interval :100ms-10s,default value:1s) |
| U32 zxTPOAMMegConfigPaDMTlvSize | 1.3.6.1.4.1.3902.3.6000.202.11.1.33 | Unsigned32 | read-only | The length of the TLV information in the function of proactive DM |
| zxTPOAMLbTable | 1.3.6.1.4.1.3902.3.6000.202.12 | not-accessible | The configuration table of LB detecting. | |
| zxTPOAMLbEntry | 1.3.6.1.4.1.3902.3.6000.202.12.1 | not-accessible | An entry containing management information applicable to a particular LB detecting. | |
| U32 zxTPOAMLbMegIndex | 1.3.6.1.4.1.3902.3.6000.202.12.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLbSnmpIndex | 1.3.6.1.4.1.3902.3.6000.202.12.1.2 | Unsigned32 | not-accessible | Detecting instance index sending by network management by snmp. |
| INT zxTPOAMLbEnable | 1.3.6.1.4.1.3902.3.6000.202.12.1.3 | INTEGER | read-create | The switch of LB. |
| U32 zxTPOAMLbMepID | 1.3.6.1.4.1.3902.3.6000.202.12.1.4 | Unsigned32 | read-create | Destination MEP ID in the function of LB.0 stands for the type of MIP. MEP ID and MIP ID can't be effective or invalid at the same time. |
| U32 zxTPOAMLbMipID | 1.3.6.1.4.1.3902.3.6000.202.12.1.5 | Unsigned32 | read-create | Destination MIP ID in the function of LB. |
| INT zxTPOAMLbMepMode | 1.3.6.1.4.1.3902.3.6000.202.12.1.6 | INTEGER | read-create | The LB working model:standard model and private model of ZTE (default: private model) |
| U32 zxTPOAMLbTimeOut | 1.3.6.1.4.1.3902.3.6000.202.12.1.7 | Unsigned32 | read-create | Timeout value of waiting responding packets(default: 5s) |
| U32 zxTPOAMLbMipTTL | 1.3.6.1.4.1.3902.3.6000.202.12.1.8 | Unsigned32 | read-create | TTL value of the destination MIP ID in the function of LB. The node is invalid when the zxTPOAMLbLBType is MEP type. |
| U32 zxTPOAMLbSendPeriod | 1.3.6.1.4.1.3902.3.6000.202.12.1.9 | Unsigned32 | read-create | Duration time in the function of LB.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence detecting unless mannual stopping. If assigned 10-86400,it means detecting lasting time. If assigned 1-9,it is error. |
| U32 zxTPOAMLbTlvSize | 1.3.6.1.4.1.3902.3.6000.202.12.1.10 | Unsigned32 | read-create | The length of the TLV information in the function of LB(1-400). |
| INT zxTPOAMLbPhb | 1.3.6.1.4.1.3902.3.6000.202.12.1.11 | INTEGER | read-create | the PHB value in LB sending packets.(default: cs7) |
| U32 zxTPOAMLbSendLimitFlag | 1.3.6.1.4.1.3902.3.6000.202.12.1.12 | Unsigned32 | read-create | The limit of sending speed in the function of LB. default value is 10 packets per second.It means sending at full speed when the value is 0. |
| INT zxTPOAMLbSendResultFlag | 1.3.6.1.4.1.3902.3.6000.202.12.1.13 | INTEGER | read-create | The flag is used to judge perserving results or not.default value is nopreserve. |
| ROW zxTPOAMLbRowStatus | 1.3.6.1.4.1.3902.3.6000.202.12.1.14 | RowStatus | read-create | Row status |
| zxTPOAMLbResultTable | 1.3.6.1.4.1.3902.3.6000.202.13 | not-accessible | The result table of LB detecting. | |
| zxTPOAMLbResultEntry | 1.3.6.1.4.1.3902.3.6000.202.13.1 | not-accessible | An entry containing result information applicable to LB detecting | |
| U32 zxTPOAMLbResultMegIndex | 1.3.6.1.4.1.3902.3.6000.202.13.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLbResultSnmpIndex | 1.3.6.1.4.1.3902.3.6000.202.13.1.2 | Unsigned32 | not-accessible | Detecting instance index sending by network management by snmp |
| U32 zxTPOAMLbResultLocalMep | 1.3.6.1.4.1.3902.3.6000.202.13.1.3 | Unsigned32 | read-only | Local MEP ID |
| U32 zxTPOAMLbResultDestMep | 1.3.6.1.4.1.3902.3.6000.202.13.1.4 | Unsigned32 | read-only | Destination MEP ID in the function of LB.0 stands for the type of MEP.MEP ID and MIP ID can't be effective or invalid at the same time. |
| U32 zxTPOAMLbResultDestMip | 1.3.6.1.4.1.3902.3.6000.202.13.1.5 | Unsigned32 | read-only | Destination MIP ID in the function of LB.0 stands for the type of MIP. MEP ID and MIP ID can't be effective or invalid at the same time |
| U32 zxTPOAMLbResultSendCount | 1.3.6.1.4.1.3902.3.6000.202.13.1.6 | Unsigned32 | read-only | The count of sending LB packets |
| U32 zxTPOAMLbResultRecvCount | 1.3.6.1.4.1.3902.3.6000.202.13.1.7 | Unsigned32 | read-only | The count of receiving LB packets |
| U32 zxTPOAMLbResultDiscardCount | 1.3.6.1.4.1.3902.3.6000.202.13.1.8 | Unsigned32 | read-only | The count of discarding LB packets |
| INT zxTPOAMLbResultStatus | 1.3.6.1.4.1.3902.3.6000.202.13.1.9 | INTEGER | read-only | The status of testing instance:not started,testing,finished |
| zxTPOAMLtTable | 1.3.6.1.4.1.3902.3.6000.202.14 | not-accessible | The configuration table of LT detecting. | |
| zxTPOAMLtEntry | 1.3.6.1.4.1.3902.3.6000.202.14.1 | not-accessible | An entry containing management information applicable to a particular LT detecting. | |
| U32 zxTPOAMLtMegIndex | 1.3.6.1.4.1.3902.3.6000.202.14.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLtSnmpIndex | 1.3.6.1.4.1.3902.3.6000.202.14.1.2 | Unsigned32 | not-accessible | Detecting instance index sending by network management by snmp |
| U32 zxTPOAMLtMepID | 1.3.6.1.4.1.3902.3.6000.202.14.1.3 | Unsigned32 | read-create | Destination MEP ID in the function of LT. |
| INT zxTPOAMLtEnable | 1.3.6.1.4.1.3902.3.6000.202.14.1.4 | INTEGER | read-create | The switch of LT. |
| U32 zxTPOAMLtTimeOut | 1.3.6.1.4.1.3902.3.6000.202.14.1.5 | Unsigned32 | read-create | Timeout value of waiting responding packets.(default: 5s) |
| U32 zxTPOAMLtTTL | 1.3.6.1.4.1.3902.3.6000.202.14.1.6 | Unsigned32 | read-create | Maximum of the TTL in the function of LT. |
| INT zxTPOAMLtPhb | 1.3.6.1.4.1.3902.3.6000.202.14.1.7 | INTEGER | read-create | The PHB value in LT sending packets.(default: cs7) |
| U32 zxTPOAMLtTlvSize | 1.3.6.1.4.1.3902.3.6000.202.14.1.8 | Unsigned32 | read-create | The length of the TLV information in the function of LT. |
| INT zxTPOAMLtMode | 1.3.6.1.4.1.3902.3.6000.202.14.1.9 | INTEGER | read-create | The LT working model:standard model and private model of ZTE. (default: private model) |
| INT zxTPOAMLtSendResultFlag | 1.3.6.1.4.1.3902.3.6000.202.14.1.10 | INTEGER | read-create | The flag used to judge perserving results or not. default value is nopreserve. |
| ROW zxTPOAMLtRowStatus | 1.3.6.1.4.1.3902.3.6000.202.14.1.11 | RowStatus | read-create | Row status |
| zxTPOAMLtResultTable | 1.3.6.1.4.1.3902.3.6000.202.15 | not-accessible | The result table of LT detecting. | |
| zxTPOAMLtResultEntry | 1.3.6.1.4.1.3902.3.6000.202.15.1 | not-accessible | An entry containing result information applicable to a particular LT detecting. | |
| U32 zxTPOAMLtResultMegIndex | 1.3.6.1.4.1.3902.3.6000.202.15.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLtResultSnmpIndex | 1.3.6.1.4.1.3902.3.6000.202.15.1.2 | Unsigned32 | not-accessible | Detecting instance index sending by network management by snmp |
| U32 zxTPOAMLtResultLocalMep | 1.3.6.1.4.1.3902.3.6000.202.15.1.3 | Unsigned32 | read-only | Local MEP ID |
| INT zxTPOAMLtResultProcessStatus | 1.3.6.1.4.1.3902.3.6000.202.15.1.4 | INTEGER | read-only | The process of LT testing:fail or success. |
| U32 zxTPOAMLtResultHopCount | 1.3.6.1.4.1.3902.3.6000.202.15.1.5 | Unsigned32 | read-only | Success hops of LT testing |
| INT zxTPOAMLtResultStatus | 1.3.6.1.4.1.3902.3.6000.202.15.1.6 | INTEGER | read-only | The status of testing instance :not started,testing,finished |
| zxTPOAMLtResultHopTable | 1.3.6.1.4.1.3902.3.6000.202.16 | not-accessible | The hop table of LT detecting. | |
| zxTPOAMLtResultHopEntry | 1.3.6.1.4.1.3902.3.6000.202.16.1 | not-accessible | An entry containing hop result information applicable to a particular LT detecting. | |
| U32 zxTPOAMLtResultHopMegIndex | 1.3.6.1.4.1.3902.3.6000.202.16.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLtResultHopSnmpIndex | 1.3.6.1.4.1.3902.3.6000.202.16.1.2 | Unsigned32 | not-accessible | Detecting instance index sending by network management by snmp |
| U32 zxTPOAMLtResultHopIndex | 1.3.6.1.4.1.3902.3.6000.202.16.1.3 | Unsigned32 | not-accessible | Hop index |
| INT zxTPOAMLtResultHopType | 1.3.6.1.4.1.3902.3.6000.202.16.1.4 | INTEGER | read-only | Hop type:MEP or MIP |
| U32 zxTPOAMLtResultHopID | 1.3.6.1.4.1.3902.3.6000.202.16.1.5 | Unsigned32 | read-only | The ID of MEP or MIP(it's invalid if the function adopt the private model of ZTE) |
| zxTPOAMTestTable | 1.3.6.1.4.1.3902.3.6000.202.17 | not-accessible | The configuration table of TEST detecting. | |
| zxTPOAMTestEntry | 1.3.6.1.4.1.3902.3.6000.202.17.1 | not-accessible | An entry containing management information applicable to a particular TEST detecting. | |
| U32 zxTPOAMTestMegIndex | 1.3.6.1.4.1.3902.3.6000.202.17.1.1 | Unsigned32 | not-accessible | MEG index |
| INT zxTPOAMTestEnable | 1.3.6.1.4.1.3902.3.6000.202.17.1.2 | INTEGER | read-create | The switch of TEST. |
| INT zxTPOAMTestType | 1.3.6.1.4.1.3902.3.6000.202.17.1.3 | INTEGER | read-create | The type of the TEST function :source /destination /bidirectional. Now only supporting the one-way model. |
| U32 zxTPOAMTestOneWayMepID | 1.3.6.1.4.1.3902.3.6000.202.17.1.4 | Unsigned32 | read-create | The MEP ID of destination MEP in the function of Unidirectional TEST. |
| U32 zxTPOAMTestSendPeriod | 1.3.6.1.4.1.3902.3.6000.202.17.1.5 | Unsigned32 | read-create | Duration time in the function of TEST.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence detecting unless mannual stopping. If assigned 10-86400,it means detecting lasting time. If assigned 1-9,it is error. |
| U32 zxTPOAMTestTlvSize | 1.3.6.1.4.1.3902.3.6000.202.17.1.6 | Unsigned32 | read-create | The length of the TLV information in the function of TEST. |
| INT zxTPOAMTestPhb | 1.3.6.1.4.1.3902.3.6000.202.17.1.7 | INTEGER | read-create | The PHB value in TEST sending packets.(default: cs7) |
| U32 zxTPOAMTestSpeed | 1.3.6.1.4.1.3902.3.6000.202.17.1.8 | Unsigned32 | read-create | Sending ratio: default value 10000kbps |
| INT zxTPOAMTestCodeType | 1.3.6.1.4.1.3902.3.6000.202.17.1.9 | INTEGER | read-create | The TLV value: all 0, all 1 (default:all 0) |
| ROW zxTPOAMTestRowStatus | 1.3.6.1.4.1.3902.3.6000.202.17.1.10 | RowStatus | read-create | Row status |
| zxTPOAMTestResultTable | 1.3.6.1.4.1.3902.3.6000.202.18 | not-accessible | The result table of TEST detecting. | |
| zxTPOAMTestResultEntry | 1.3.6.1.4.1.3902.3.6000.202.18.1 | not-accessible | An entry containing result information applicable to a particular TEST detecting. | |
| U32 zxTPOAMTestResultMegIndex | 1.3.6.1.4.1.3902.3.6000.202.18.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMTestResultLocalMep | 1.3.6.1.4.1.3902.3.6000.202.18.1.2 | Unsigned32 | read-only | Local MEP ID |
| C32 zxTPOAMTestResultRecvCount | 1.3.6.1.4.1.3902.3.6000.202.18.1.3 | Counter32 | read-only | The count of sending TEST packets. |
| U32 zxTPOAMTestResultBandWidth | 1.3.6.1.4.1.3902.3.6000.202.18.1.4 | Unsigned32 | read-only | The bandwidth in the function of TEST. |
| C32 zxTPOAMTestResultDiscardCount | 1.3.6.1.4.1.3902.3.6000.202.18.1.5 | Counter32 | read-only | Discarding count in the function of TEST. |
| INT zxTPOAMTestResultStatus | 1.3.6.1.4.1.3902.3.6000.202.18.1.6 | INTEGER | read-only | The status of testing instance :not started,testing,finished |
| zxTPOAMLmOnDemandTable | 1.3.6.1.4.1.3902.3.6000.202.19 | not-accessible | The testing table of on-demand LM detecting. | |
| zxTPOAMLmOnDemandEntry | 1.3.6.1.4.1.3902.3.6000.202.19.1 | not-accessible | An entry containing management information applicable to a particular on-demand LM detecting. | |
| U32 zxTPOAMLMOnDemandMegIndex | 1.3.6.1.4.1.3902.3.6000.202.19.1.1 | Unsigned32 | not-accessible | MEG index |
| INT zxTPOAMLMOnDemandEnable | 1.3.6.1.4.1.3902.3.6000.202.19.1.2 | INTEGER | read-create | The switch of on-demand LM. |
| U32 zxTPOAMLMOnDemandSendPeriod | 1.3.6.1.4.1.3902.3.6000.202.19.1.3 | Unsigned32 | read-create | Duration time in the function of LM.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence detecting unless mannual stopping. If assigned 10-86400,it means detecting lasting time. If assigned 1-9,it is error. |
| INT zxTPOAMLMOnDemandLmPhb | 1.3.6.1.4.1.3902.3.6000.202.19.1.4 | INTEGER | read-create | The PHB value in LM sending packets. |
| U32 zxTPOAMLMOnDemandSendInterval | 1.3.6.1.4.1.3902.3.6000.202.19.1.5 | Unsigned32 | read-create | Sending intervals in the function of on-demand LM. (sending interval :100ms-10s,default value:1s) |
| ROW zxTPOAMLMOnDemandRowStatus | 1.3.6.1.4.1.3902.3.6000.202.19.1.6 | RowStatus | read-create | Row status |
| INT zxTPOAMLMOnDemandType | 1.3.6.1.4.1.3902.3.6000.202.19.1.7 | INTEGER | read-create | On-demand LM adopts protocol type: G.8114,counting the data packets; Y.1731,counting the data packets and OAM packets. |
| zxTPOAMLmOnDemandResultTable | 1.3.6.1.4.1.3902.3.6000.202.20 | not-accessible | The result table of on-demand LM detecting. | |
| zxTPOAMLmOnDemandResultEntry | 1.3.6.1.4.1.3902.3.6000.202.20.1 | not-accessible | An entry containing result information applicable to a particular on-demand LM detecting. | |
| U32 zxTPOAMLmODResultLocalMegIndex | 1.3.6.1.4.1.3902.3.6000.202.20.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMLmODResultLocalMepID | 1.3.6.1.4.1.3902.3.6000.202.20.1.2 | Unsigned32 | read-only | Local MEP ID |
| U32 zxTPOAMLmODResultLocalSPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.3 | Unsigned32 | read-only | The number of local sending packets. |
| U32 zxTPOAMLmODResultLocalRPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.4 | Unsigned32 | read-only | The number of local receiving packets. |
| U32 zxTPOAMLmODResultLocalDRPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.5 | Unsigned32 | read-only | The number of local lossing packets. |
| U32 zxTPOAMLmODResultLocalDiscardRatio | 1.3.6.1.4.1.3902.3.6000.202.20.1.6 | Unsigned32 | read-only | The ratio of local lossing packets in the function of on-demand LM. |
| U32 zxTPOAMLmODResultRemoteSPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.7 | Unsigned32 | read-only | The number of remote sending packets. |
| U32 zxTPOAMLmODResultRemoteRPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.8 | Unsigned32 | read-only | The number of remote receiving packets. |
| U32 zxTPOAMLmODResultRemoteDRPktCount | 1.3.6.1.4.1.3902.3.6000.202.20.1.9 | Unsigned32 | read-only | The number of remote lossing packets. |
| U32 zxTPOAMLmODResultRemoteDiscardRatio | 1.3.6.1.4.1.3902.3.6000.202.20.1.10 | Unsigned32 | read-only | The ratio of remote lossing packets in the function of on-demand LM. |
| INT zxTPOAMLmODResultStatus | 1.3.6.1.4.1.3902.3.6000.202.20.1.11 | INTEGER | read-only | The status of testing instance :not started,testing,finished |
| zxTPOAMDMTable | 1.3.6.1.4.1.3902.3.6000.202.21 | not-accessible | The testing table of DM detecting. | |
| zxTPOAMDMEntry | 1.3.6.1.4.1.3902.3.6000.202.21.1 | not-accessible | An entry containing management information applicable to a particular DM detecting. | |
| U32 zxTPOAMDMMegIndex | 1.3.6.1.4.1.3902.3.6000.202.21.1.1 | Unsigned32 | not-accessible | MEG index |
| INT zxTPOAMDMEnable | 1.3.6.1.4.1.3902.3.6000.202.21.1.2 | INTEGER | read-create | The switch of DM. |
| INT zxTPOAMDMType | 1.3.6.1.4.1.3902.3.6000.202.21.1.3 | INTEGER | read-create | The type of the DM function. |
| INT zxTPOAMDMSendPhb | 1.3.6.1.4.1.3902.3.6000.202.21.1.4 | INTEGER | read-create | the PHB value in DM sending packets. |
| U32 zxTPOAMDMSendPeriod | 1.3.6.1.4.1.3902.3.6000.202.21.1.5 | Unsigned32 | read-create | Duration time in the function of DM.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence detecting unless mannual stopping. If assigned 10-86400,it means detecting lasting time. If assigned 1-9,it is error. |
| U32 zxTPOAMDMSendInterval | 1.3.6.1.4.1.3902.3.6000.202.21.1.6 | Unsigned32 | read-create | Sending intervals in the function of DM. (sending interval :100ms-10s,default value:1s) |
| ROW zxTPOAMDMRowStatus | 1.3.6.1.4.1.3902.3.6000.202.21.1.7 | RowStatus | read-create | row status |
| U32 zxTPOAMDMTlvSize | 1.3.6.1.4.1.3902.3.6000.202.21.1.8 | Unsigned32 | read-create | The length of the TLV information in the function of DM. |
| zxTPOAMDMResultTable | 1.3.6.1.4.1.3902.3.6000.202.22 | not-accessible | The result table of DM detecting. | |
| zxTPOAMDMResultEntry | 1.3.6.1.4.1.3902.3.6000.202.22.1 | not-accessible | An entry containing result information applicable to a particular DM detecting | |
| U32 zxTPOAMDMResultMegIndex | 1.3.6.1.4.1.3902.3.6000.202.22.1.1 | Unsigned32 | not-accessible | MEG index |
| U32 zxTPOAMDMResultLocalMepID | 1.3.6.1.4.1.3902.3.6000.202.22.1.2 | Unsigned32 | read-only | Local MEP ID |
| C64 zxTPOAMDMResultDelay | 1.3.6.1.4.1.3902.3.6000.202.22.1.3 | Counter64 | read-only | The delay value in the function of DM (ns) |
| C64 zxTPOAMDMResultDelayVariationRatio | 1.3.6.1.4.1.3902.3.6000.202.22.1.4 | Counter64 | read-only | The delay variation ratio in the function of DM(one in a million) |
| C64 zxTPOAMDMResultAvgDelay | 1.3.6.1.4.1.3902.3.6000.202.22.1.5 | Counter64 | read-only | The average delay value in the function of DM(ns) |
| C64 zxTPOAMDMResultAvgDelayVariationRatio | 1.3.6.1.4.1.3902.3.6000.202.22.1.6 | Counter64 | read-only | The average delay variation ratio in the function of DM (one in a million) |
| C64 zxTPOAMDMResultDelayVariation | 1.3.6.1.4.1.3902.3.6000.202.22.1.7 | Counter64 | read-only | The difference of delay value before and after in the function of DM(ns) |
| C64 zxTPOAMDMResultAvgDelayVariation | 1.3.6.1.4.1.3902.3.6000.202.22.1.8 | Counter64 | read-only | The average difference of delay value before and after in the function of DM(ns) |
| INT zxTPOAMDMResultStatus | 1.3.6.1.4.1.3902.3.6000.202.22.1.9 | INTEGER | read-only | The status of testing instance :not started,testing,finished |
| INT zxTPOAMDMResultType | 1.3.6.1.4.1.3902.3.6000.202.22.1.10 | INTEGER | read-only | The type of the DM function |
RFC description
ZTE ZXROS-NG Transport Path OAM MIB; manages transport path Operations, Administration, and Maintenance (OAM) functions for ZTE routers.
Start monitoring ZTE ZXROSNG transport/carrier Ethernet network elements (Y.1731 continuity-check/loss-delay-measurement status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.