ZXR10-IP-IF-MIB

All MIBs › ZXR10-IP-IF-MIB

Organization: ZTE Corporation

Last Updated: 2005-04-12

Category: ZTE ZXR10 Interface and Statistics

Description: Defines ZTE ZXR10 IP interface configuration including address assignment, MTU, and Layer 3 interface properties.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-IP-IF-MIB?

ZXR10-IP-IF-MIB (part of ZXROS v4.6.02) configures IP-layer (Layer 3) interface properties on ZTE ZXR10 routers/switches, including IP address assignment and MTU settings for each Layer 3 interface. It exposes interface configuration data rather than raw traffic counters, defining how each Layer 3 interface is addressed and sized for IP forwarding. Monitoring this MIB helps confirm the software-configured state of IP interfaces matches intended network design -- an incorrect MTU can cause fragmentation or path-MTU black-holing, and an incorrect/missing IP address assignment can cause an interface to be unreachable, both diagnosable by comparing this MIB's configuration objects to expected values. It parallels/extends the standard IETF IF-MIB and IP-MIB interface models with ZXROS-specific Layer 3 interface configuration. The ZXR10-IP-IF-MIB MIB is deployed on ZTE ZXR10 series routers/switches for managing Layer 3 interface provisioning.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IP-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series routers/switches (ZXROS v4.6.02)

Monitoring Examples

No sample object names were provided for this MIB, but per module_desc an admin would poll the IP address and MTU configuration objects for a given Layer 3 interface to confirm they match the intended subnet and link MTU; a mismatched MTU on one side of a link is a classic cause of intermittent large-packet connectivity failures that this MIB would help surface.

What Can Be Monitored

IP address assignment per interface
interface MTU configuration
Layer 3 interface properties

Imported Objects

From RFC1155-SMI

IpAddress

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

From ZXR10-SMI

zxr10interfaces

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10IPIfMIB	1.3.6.1.4.1.3902.3.103.1			ZXROS v4.6.02 Interfaces config MIB
zxr10IPIfMIBObjects	1.3.6.1.4.1.3902.3.103.1.1
zxr10IPAddressConfiguration	1.3.6.1.4.1.3902.3.103.1.1.1
zxr10IPAddrTable	1.3.6.1.4.1.3902.3.103.1.1.1.1		not-accessible	Ip address config table.
zxr10IPAddrEntry	1.3.6.1.4.1.3902.3.103.1.1.1.1.1		not-accessible
IP zxr10IPAddrPrimaryIp	1.3.6.1.4.1.3902.3.103.1.1.1.1.1.1	IpAddress	read-write	The main Ip address on this interface
IP zxr10IPAddrPrimaryIpMask	1.3.6.1.4.1.3902.3.103.1.1.1.1.1.2	IpAddress	read-write	The mask of primary Ip address on this interface
IP zxr10IPAddrBroadcast	1.3.6.1.4.1.3902.3.103.1.1.1.1.1.3	IpAddress	read-write	The Broadcast address on this interface
ROW zxr10IPAddrRowStatus	1.3.6.1.4.1.3902.3.103.1.1.1.1.1.4	RowStatus	read-write	This object is used to manage creation and deletion of rows in this table. zxr10IpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The value in any column may be modified any time even the value of this entry rowStatus object is 'active'. Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
STR zxr10IPAddrIfName	1.3.6.1.4.1.3902.3.103.1.1.1.1.1.5	DisplayString	read-only	Interface name
zxr10IPSecondaryAddrTable	1.3.6.1.4.1.3902.3.103.1.1.1.2		not-accessible	Secondary Ip address config table.
zxr10IPSecondaryAddrEnry	1.3.6.1.4.1.3902.3.103.1.1.1.2.1		not-accessible
IP zxr10IPSecondaryAddr	1.3.6.1.4.1.3902.3.103.1.1.1.2.1.1	IpAddress	read-write	Secondary Ip address on this interface
IP zxr10IPSecondaryAddrMask	1.3.6.1.4.1.3902.3.103.1.1.1.2.1.2	IpAddress	read-write	Secondary Ip mask on this interface
ROW zxr10IPSecondaryAddrRowStatus	1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3	RowStatus	read-write	This object is used to manage creation and deletion of rows in this table. zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The value in any column may be modified any time even the value of this entry rowStatus object is 'active'. Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
STR zxr10IPSecondaryIfName	1.3.6.1.4.1.3902.3.103.1.1.1.2.1.4	DisplayString	read-only	Interface name

RFC description

Configures IP address settings and interface parameters for ZTE ZXR10 routing systems.

Start monitoring ZTE ZXR10 series routers/switches, ZXROS v4.6.02 (Layer-3 interface IP-address/MTU config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-IP-IF-MIB

What Is ZXR10-IP-IF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description