All MIBs › ZTE-AN-VLAN-MIB
Organization: ZTE Corporation
Last Updated: 2011-05-24
Category: ZTE Access Node (ZTE-AN) Management
Description: Manages ZTE access node VLAN configuration including VLAN creation, port membership, and tagging policies.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZTE-AN-VLAN-MIB?
ZTE-AN-VLAN-MIB is a ZTE Corporation proprietary MIB implementing VLAN configuration on ZTE access-network (PON/DSLAM) equipment. Its objects cover total VLAN count, global C-tag/S-tag TPID values, and platform capabilities, a VLAN table (ID, name, description, row status), and a per-interface VLAN-configuration table recording port mode (access/trunk/hybrid), TLS (Transparent LAN Service, Q-in-Q) enable and S-VID, default VID/CVID, tagged/untagged VLAN lists, per-interface TPID and TPID-enable, ingress-filter enable, and acceptable frame types. As a configuration MIB it lets an administrator confirm a port's VLAN mode and tagged/untagged membership before troubleshooting unexpected subscriber traffic tagging. It is deployed on ZTE access-network (PON/DSLAM) equipment. Engineers can download the ZTE-AN-VLAN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE access-network (PON/DSLAM) equipment
Monitoring Examples
An administrator checks zxAnVlanIfConfMode and zxAnVlanIfConfDefaultVid to confirm a subscriber port's VLAN mode and default VLAN assignment on ZTE access-network equipment.
What Can Be Monitored
- per-port VLAN mode and tagged/untagged membership
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TruthValue |
From ZTE-AN-IF-MIB
| zxAnSubIfIndex | OBJECT-TYPE |
From ZTE-AN-SMI
| zxAnBridge | OBJECT-IDENTITY |
From ZTE-AN-TC-MIB
| VlanId | |
| ZxAnPortList | |
| ZxAnSubIfIndex |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxAnVlanMib | 1.3.6.1.4.1.3902.1082.40.50 | VLAN MIB definition. | ||
| zxAnVlanGlobalObjects | 1.3.6.1.4.1.3902.1082.40.50.1 | |||
| I32 zxAnVlanNum | 1.3.6.1.4.1.3902.1082.40.50.1.1 | Integer32 | read-only | The current number of VLANs that are configured in this device. |
| STR zxAnVlanGlobalCtagTpid | 1.3.6.1.4.1.3902.1082.40.50.1.2 | DisplayString | read-write | This object indicates global inner VLAN TPID, it only can be configured with value '0x8100'. For C600 series, this object indicates up to four global inner VLAN TPIDs, separated by commas, e.g., '0x8100', '0x8100,0x9100'. |
| STR zxAnVlanGlobalTpid | 1.3.6.1.4.1.3902.1082.40.50.1.3 | DisplayString | read-write | This object indicates up to four global outer VLAN TPIDs, separated by commas, e.g., '0x8100', '0x8100,0x9100'. The default value is '0x8100,0x88a8' for C600 series. |
| BIT zxAnVlanCapabilities | 1.3.6.1.4.1.3902.1082.40.50.1.100 | Bits | read-only | The VLAN capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnVlanExtPortListTable and not supporting zxAnVlanPortListTable. bit 1: value 1 means changing zxAnVlanBasedFwdUplinkPort to zxAnVlanBasedFwdOtherIfIndex, supporting zxAnVlanBasedFwdOtherSubIfIndex and modifying MAX-ACCESS of zxAnVlanBasedFwdIfIndex and zxAnVlanBasedFwdSubIfIndex from read-only to read-create. bit 2: value 1 means supporting zxAnVlanIfConfVlanTable and not supporting zxAnVlanIfConfVlanCmdTable, zxAnVlanIfConfUntaggedVlanList, zxAnVlanIfConfTaggedVlanList in zxAnVlanIfConfTable. bit 3: value 1 means supporting zxAnVlanExtPortListIITable and not supporting zxAnVlanExtPortListTable, zxAnVlanPortListTable. bit 4: value 1 means supporting zxAnMcastVlanGlobalTransTable, zxAnMcastVlanIfTransTable in ZTE-AN-MULTICAST-BASE-MIB.mib, and not supporting zxAnMVlanGlobalTransTable, zxAnMVlanIfTransTable in this file. bit 5: value 1 means not supporting zxAnVlanIfAcceptableFrameTypes in zxAnVlanIfConfTable. bit 6: value 1 means supporting zxAnVlanIfExtTransTable and not supporting zxAnVlanIfTransTable. bit 7: value 1 means supporting zxAnVlanIfConfDefaultVid not configured. bit 8: value 1 means supporting zxAnVlanIfExtTransCos and zxAnVlanIfExtTransCtagCos in zxAnVlanIfExtTransTable. NOTE: No recommended to display it in NMS. |
| zxAnVlanObjects | 1.3.6.1.4.1.3902.1082.40.50.2 | |||
| zxAnVlanBaseObjects | 1.3.6.1.4.1.3902.1082.40.50.2.1 | |||
| zxAnVlanTable | 1.3.6.1.4.1.3902.1082.40.50.2.1.2 | not-accessible | A table containing VLAN information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. | |
| zxAnVlanEntry | 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1 | not-accessible | Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. It is forbidden to destroy zxAnVlanEntry whose zxAnVid exists in zxAnVlanVoipConfTable. | |
| VLA zxAnVid | 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.1 | VlanId | not-accessible | The VlanId to which this entry's filtering information applies. |
| STR zxAnVlanName | 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.2 | DisplayString | read-create | DURABLE: { 'Default' } An administratively assigned string, which may be used to identify the VLAN. |
| STR zxAnVlanDesc | 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.3 | DisplayString | read-create | The description of VLAN. |
| ROW zxAnVlanRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.50 | RowStatus | read-create | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1. |
| zxAnVlanIfConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.1.4 | not-accessible | A table containing VLAN Port information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. | |
| zxAnVlanIfConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1 | not-accessible | Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. | |
| INT zxAnVlanIfConfMode | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.1 | INTEGER | read-write | The access mode of the port. |
| INT zxAnVlanIfConfTlsEnable | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.2 | INTEGER | read-write | The Transparent LAN Service enable or disable. When port in access mode, TLS always disable. |
| I32 zxAnVlanIfConfTlsSVid | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.3 | Integer32 | read-write | The TLS vlan id of the port. Only TLS enable, TLS Vlan id can be configured. |
| I32 zxAnVlanIfConfDefaultVid | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.4 | Integer32 | read-write | The default VLAN of the port. '0' indicates not configured. |
| I32 zxAnVlanIfConfDefaultCVid | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.5 | Integer32 | read-write | The default CVLAN of the port. |
| STR zxAnVlanIfConfUntaggedVlanList | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.6 | DisplayString | read-only | The Untagged vlan sequence to a Port. |
| STR zxAnVlanIfConfTaggedVlanList | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.7 | DisplayString | read-only | The Tagged vlan sequence to a Port. |
| I32 zxAnVlanIfConfTpid | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.8 | Integer32 | read-write | The outer VLAN TPID of this port. |
| INT zxAnVlanIfIngressFilterEnable | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.9 | INTEGER | read-write | When this is enable(1) the port will reject incoming frames for VLAN only if the port belongs to that vlan. When this is disable(2), the port will accept all incoming frames,regardless of the the port's vlan membership. |
| INT zxAnVlanIfAcceptableFrameTypes | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10 | INTEGER | read-write | When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the DefaultVid for this port. When admitOnlyVlanUntagged(3), only untagged frames or Priority-Tagged frames received on this port will be accepted for this port. When admitOnlyVlanSingleTagged(4), only single tagged frames received on this port will be accepted for this port. When admitOnlyVlanMaxDoubleTagged(5), the device will accept untagged frames or Priority-tagged frames or single tagged frames or double tagged frames received on this port. When admitOnlyVlanMaxSingleTagged(6), the device will accept untagged frames or Priority-tagged frames or single tagged frames received on this port. When admitOnlyVlanDoubleTagged(7), only double tagged frames received on this port will be accepted for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP. |
| INT zxAnVlanIfConfTpidEnable | 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.11 | INTEGER | read-write | Enable or disable zxAnVlanIfConfTpid. enabled(1) -- Apply the out VLAN TPID with zxAnVlanIfConfTpid. disabled(2) -- Apply the out VLAN TPID with zxAnVlanConfTpid in the zxAnVlanConfTpidTable. |
| zxAnVlanIfConfVlanTable | 1.3.6.1.4.1.3902.1082.40.50.2.1.9 | not-accessible | VLAN configuration table. This table is only used for getting VLAN information (network-side SVLAN of service port function) when operating on EPON/GPON ports. This table is used for setting and getting VLAN information when operating on uplink ports. This table is used for setting and getting VLAN information when operating on DSL ports. | |
| zxAnVlanIfConfVlanEntry | 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1 | not-accessible | VLAN configuration entry. | |
| OCT zxAnVlanIfConfVlanTagVlanList | 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.1 | OCTET STRING | read-write | Tagged VLAN list in the port. A bit value of 1 indicates the associated VLAN is in the port. |
| OCT zxAnVlanIfConfVlanUntagVlanList | 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.2 | OCTET STRING | read-write | Untagged VLAN list in the port. A bit value of 1 indicates the associated VLAN is in the port. |
| zxAnVlanExtPortListIITable | 1.3.6.1.4.1.3902.1082.40.50.2.1.10 | not-accessible | Port list based on VLAN table. | |
| zxAnVlanExtPortListIIEntry | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1 | not-accessible | Port list based on VLAN entry. | |
| I32 zxAnVlanExtPortListIIRack | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.1 | Integer32 | not-accessible | Rack index for port list on the VLAN. |
| I32 zxAnVlanExtPortListIIShelf | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.2 | Integer32 | not-accessible | Shelf index for port list on the VLAN. |
| I32 zxAnVlanExtPortListIISlot | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.3 | Integer32 | not-accessible | Slot index for port list on the VLAN. |
| I32 zxAnVlanExtPortListIIPort | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.4 | Integer32 | not-accessible | Port index for port list on the VLAN. Value 0 means non-PON port, other values means EPON/GPON port. |
| I32 zxAnVlanExtPortListIISegment | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.5 | Integer32 | not-accessible | The segment of ONU that contains the port list. The segment will range from 1 to 16 when the port is EPON/GPON port. The segment will be always 1 when the port is non-PON port. |
| ZXA zxAnVlanExtPortUntagPortListII | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.6 | ZxAnPortList | read-only | Untagged ports of the VLAN. |
| ZXA zxAnVlanExtPortTagPortListII | 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.7 | ZxAnPortList | read-only | Tagged ports of the VLAN. |
| zxAnVlanTransObjects | 1.3.6.1.4.1.3902.1082.40.50.2.3 | |||
| zxAnVlanIfExtTransTable | 1.3.6.1.4.1.3902.1082.40.50.2.3.5 | not-accessible | VLAN translation extension table. This table is an extension of the table zxAnVlanIfTransTable. This table includes VLAN translation information for single tagged packets, and double tagged packets. | |
| zxAnVlanIfExtTransEntry | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1 | not-accessible | VLAN Translation extension entry. | |
| VLA zxAnVlanIfExtTransIngressVid | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.1 | VlanId | not-accessible | Ingress VID for VLAN translation. |
| I32 zxAnVlanIfExtTransIngressCVid | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.2 | Integer32 | not-accessible | Ingress C-VID for VLAN translation. '0' means the packet to be translated is single tagged packet. |
| VLA zxAnVlanIfExtTransVid | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.3 | VlanId | read-create | VID after VLAN translation. |
| I32 zxAnVlanIfExtTransCVid | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.4 | Integer32 | read-create | C-VID after VLAN translation. '0' means the packet after VLAN translation is single tagged packet. |
| I32 zxAnVlanIfExtTransCos | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.5 | Integer32 | read-create | VLAN CoS after VLAN translation. Value '0xFF' indicates not configured. |
| I32 zxAnVlanIfExtTransCtagCos | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.6 | Integer32 | read-create | CVLAN CoS after VLAN translation. Value '0xFF' indicates not configured. |
| ROW zxAnVlanIfExtTransRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnExampleFunc1Xxx1Entry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnVlanBasedForwardingObjects | 1.3.6.1.4.1.3902.1082.40.50.2.6 | |||
| zxAnVlanBasedFwdTable | 1.3.6.1.4.1.3902.1082.40.50.2.6.3 | not-accessible | This table includes VLAN based forward rule configuration. | |
| zxAnVlanBasedFwdEntry | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1 | not-accessible | An entry in zxAnVlanBasedFwdTable. | |
| VLA zxAnVlanBasedFwdSVid | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.1 | VlanId | not-accessible | SVlan ,it shouled be included in the zxAnBasedFwdVlanTable |
| I32 zxAnVlanBasedFwdCVid | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.2 | Integer32 | not-accessible | cvlan |
| I32 zxAnVlanBasedFwdIfIndex | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.3 | Integer32 | read-create | An index for port. |
| ZXA zxAnVlanBasedFwdSubIfIndex | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.4 | ZxAnSubIfIndex | read-create | An index for port. |
| I32 zxAnVlanBasedFwdOtherIfIndex | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.5 | Integer32 | read-create | An index of the other port. |
| ZXA zxAnVlanBasedFwdOtherSubIfIndex | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.6 | ZxAnSubIfIndex | read-create | An index of the other port. |
| ROW zxAnVlanBasedFwdRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.50 | RowStatus | read-create | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables usage rules in zxAnVlanBasedFwdEntry description. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1. |
| zxAnVlanBasedFwdConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.6.4 | not-accessible | This table includes VLAN based forward configuration information. | |
| zxAnVlanBasedFwdConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.6.4.1 | not-accessible | An entry in zxAnVlanBasedFwdConfTable. | |
| INT zxAnVlanBasedFwdConfMode | 1.3.6.1.4.1.3902.1082.40.50.2.6.4.1.1 | INTEGER | read-write | VLAN based forwarding mode. vlan1To1(1) - Forwarding the packets with the S-VID configured in the zxAnVlanBasedFwdTable. When user-side interface in the zxAnVlanBasedFwdTable is deleted, the packet with the S-VID will be discarded. vlanAndMac(2) - Forwarding the packets with VLAN ID and MAC address. |
| zxAnVlanTpidObjects | 1.3.6.1.4.1.3902.1082.40.50.2.9 | |||
| zxAnVlanTpidConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.9.2 | not-accessible | A table containing VLAN TPID information. | |
| zxAnVlanTpidConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1 | not-accessible | Entry for zxAnVlanTpidConfTable. The multi-variables binding rule should be complied with when a manager creates a VLAN TPID. According to this rule, all the related mib variables must be included in one SNMP set operation. | |
| I32 zxAnVlanTpidConfTpid | 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.1 | Integer32 | read-create | This object indicates the outer VLAN TPID of this VLAN. Value define uses hex. |
| ROW zxAnVlanTpidConfRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanTpidConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnVlanForwardingCtrlObjects | 1.3.6.1.4.1.3902.1082.40.50.2.10 | |||
| zxAnVlanForwardingCtrlTable | 1.3.6.1.4.1.3902.1082.40.50.2.10.2 | not-accessible | A table containing VLAN forwarding control information. | |
| zxAnVlanForwardingCtrlEntry | 1.3.6.1.4.1.3902.1082.40.50.2.10.2.1 | not-accessible | Entry for zxAnVlanForwardingCtrlTable. | |
| INT zxAnVlanMcastForwardingCtrl | 1.3.6.1.4.1.3902.1082.40.50.2.10.2.1.1 | INTEGER | read-write | The multicast packet forwarding control. |
| zxAnVlanProtocolFilterObjects | 1.3.6.1.4.1.3902.1082.40.50.2.11 | |||
| zxAnVlanProtocolFilterConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.11.2 | not-accessible | A table containing VLAN protocol filter information. | |
| zxAnVlanProtocolFilterConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1 | not-accessible | Entry for zxAnVlanProtocolFilterConfTable. | |
| INT zxAnVlanProtoFilterConfEthType | 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.1 | INTEGER | read-create | EtherType. pppoe(1) - EtherType is PPPoE. ipoe(2) - EtherType is IPoE. |
| ROW zxAnVlanProtoFilterConfRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanProtocolFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnVlanTpidFilterObjects | 1.3.6.1.4.1.3902.1082.40.50.2.12 | |||
| zxAnVlanTpidFilterConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.12.2 | not-accessible | A table containing TPIDs to filter the packets. Packets will be discarded when the TPID is mismatched. | |
| zxAnVlanTpidFilterConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1 | not-accessible | A zxAnVlanTpidFilterConfTable entry. When the S-tag TPID filtering is configured in the zxAnVlanIfTpidFilterConfTable, the interface will filter the packets with zxAnVlanIfTpidFilterStagTpid. When the S-tag TPID filtering is not configured in the zxAnVlanIfTpidFilterConfTable, the interface will filter the packets with zxAnVlanTpidFilterConfStagTpid. When the S-tag TPID filtering is not configured in the zxAnVlanIfTpidFilterConfTable and zxAnVlanTpidFilterConfTable, it means the S-tag TPID filtering is disabled. | |
| INT zxAnVlanTpidFilterConfIfType | 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.1 | INTEGER | not-accessible | Interface type. |
| STR zxAnVlanTpidFilterConfStagTpid | 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.2 | DisplayString | read-create | Outer VLAN TPIDs. This object indicates up to four outer VLAN TPIDs of the interface, separated by commas, e.g., '0x8100', '0x8100,0x9100'. |
| ROW zxAnVlanTpidFilterConfRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanTpidFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnVlanIfTpidFilterConfTable | 1.3.6.1.4.1.3902.1082.40.50.2.12.3 | not-accessible | A table containing TPIDs of the interface to filter the packets. Packets will be discarded when the TPID is mismatched. | |
| zxAnVlanIfTpidFilterConfEntry | 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1 | not-accessible | A zxAnVlanIfTpidFilterConfTable entry. | |
| STR zxAnVlanIfTpidFilterStagTpid | 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.1 | DisplayString | read-create | Outer VLAN TPIDs. This object indicates up to four outer VLAN TPIDs of the interface, separated by commas, e.g., '0x8100', '0x8100,0x9100'. |
| ROW zxAnVlanIfTpidFilterRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanIfTpidFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnVlanModifyCosObjects | 1.3.6.1.4.1.3902.1082.40.50.2.13 | |||
| zxAnVlanCopyCosToInnerTable | 1.3.6.1.4.1.3902.1082.40.50.2.13.2 | not-accessible | A table containing modifying inner CoS information. | |
| zxAnVlanCopyCosToInnerEntry | 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1 | not-accessible | Entry for zxAnVlanCopyCosToInnerTable. | |
| INT zxAnVlanCopyCosToInnerDirection | 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.1 | INTEGER | read-create | Direction. |
| INT zxAnVlanCopyCosToInnerMode | 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.2 | INTEGER | read-create | networkSide(1) - The rule is used in network side. |
| ROW zxAnVlanCopyCosToInnerRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanCopyCosToInnerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnVlanCopyCosToOuterTable | 1.3.6.1.4.1.3902.1082.40.50.2.13.3 | not-accessible | A table containing modifying outer CoS information. | |
| zxAnVlanCopyCosToOuterEntry | 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1 | not-accessible | Entry for zxAnVlanCopyCosToOuterTable. | |
| INT zxAnVlanCopyCosToOuterDirection | 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.1 | INTEGER | read-create | Direction. |
| INT zxAnVlanCopyCosToOuterMode | 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.2 | INTEGER | read-create | networkSide(1) - The rule is used in network side. |
| ROW zxAnVlanCopyCosToOuterRowStatus | 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanCopyCosToInnerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
RFC description
VLAN management for ZTE bridging platforms. Manages VLAN configuration, tagging, forwarding rules, and protocol filtering.
Start monitoring ZTE access-network (PON/DSLAM) equipment (per-port VLAN mode/tagged-membership config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.