ZXR10-L3VPN-STAT-MIB

All MIBs › ZXR10-L3VPN-STAT-MIB

Organization: ZTE Corporation

Last Updated: 2016-12-22

Category: ZTE ZXR10 L2VPN and L3VPN

Description: Provides ZTE ZXR10 Layer 3 VPN traffic statistics including per-VRF packet and byte counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-L3VPN-STAT-MIB?

ZXR10-L3VPN-STAT-MIB reports MPLS Layer 3 VPN traffic statistics on ZTE ZXR10 routers (ROS v4.6.03), giving provider-edge operators per-VRF packet and byte counters for their customers' VPN instances. It exposes per-VRF traffic-volume counters. It is a performance/traffic-monitoring MIB used to track customer VPN traffic volume rather than hardware/fault status, valuable for capacity planning and for verifying service-level agreements per VPN customer. It builds on the MPLS L3VPN architecture (RFC 4364) and typically complements VRF-related interface indices from the standard IF-MIB. It is typically deployed on ZXR10 provider-edge (PE) routers carrying multiple customer VPN instances, tracked via the ZXR10-L3VPN-STAT-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-L3VPN-STAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 provider-edge (PE) router

Monitoring Examples

No specific object names were present in the source, so the following scenario is inferred from module_desc: an operator would poll per-VRF byte and packet counters to track a specific customer's L3VPN traffic volume over time. A counter that stops incrementing while the underlying physical interface remains up would indicate that the VRF's routing or forwarding path has silently broken despite the link itself being healthy.

What Can Be Monitored

per-VRF packet counters
per-VRF byte counters
VPN instance traffic statistics

Imported Objects

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

From ZXR10-SMI

zxr10L3vpn

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxr10L3vpnStatisRecvPkts OID:

Select a ZTE ZXR10 provider-edge (PE) router (per-VRF traffic packet/byte counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10L3vpnStatisRecvPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of packets received by the l3vpn instance. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10MplsL3vpnStatisMIB	1.3.6.1.4.1.3902.3.105.1			ZXROS v4.6.03 Mpls L3vpn query and configuration MIB
zxr10L3vpnStatisObjects	1.3.6.1.4.1.3902.3.105.1.1
zxr10L3vpnStatisTable	1.3.6.1.4.1.3902.3.105.1.1.1		not-accessible	Mpls L3vpn instance query table
zxr10L3vpnStatisEntry	1.3.6.1.4.1.3902.3.105.1.1.1.1		not-accessible	Information of Mpls L3vpn instance configured on a PE
U32 zxr10L3vpnStatisVpnID	1.3.6.1.4.1.3902.3.105.1.1.1.1.1	Unsigned32	read-only	VPN ID
STR zxr10L3vpnStatisVpnName	1.3.6.1.4.1.3902.3.105.1.1.1.1.2	DisplayString	read-only	VRF name
C64 zxr10L3vpnStatisRecvPktsEx	1.3.6.1.4.1.3902.3.105.1.1.1.1.3	Counter64	read-only	Number of packets received by the l3vpn instance
C64 zxr10L3vpnStatisRecvBytes	1.3.6.1.4.1.3902.3.105.1.1.1.1.4	Counter64	read-only	Number of bytes received by the l3vpn instance
C64 zxr10L3vpnStatisSndPkts	1.3.6.1.4.1.3902.3.105.1.1.1.1.5	Counter64	read-only	Number of packets sent by the l3vpn instance
C64 zxr10L3vpnStatisSndBytes	1.3.6.1.4.1.3902.3.105.1.1.1.1.6	Counter64	read-only	Number of bytes sent by the l3vpn instance
zxr10L3vpnPeerPolStatisObjects	1.3.6.1.4.1.3902.3.105.1.2
zxr10L3vpnPeerPolicyStatisTable	1.3.6.1.4.1.3902.3.105.1.2.1		not-accessible	Mpls L3vpn peer policy query table
zxr10L3vpnPeerPolicyStatisEntry	1.3.6.1.4.1.3902.3.105.1.2.1.1		not-accessible	Traffic information of MPLS L3VPN peer policy
STR zxr10L3vpnPeerPolStatisVpnName	1.3.6.1.4.1.3902.3.105.1.2.1.1.1	DisplayString	not-accessible	VRF name
IP zxr10L3vpnPeerPolStatisPeerAddr	1.3.6.1.4.1.3902.3.105.1.2.1.1.2	IpAddress	not-accessible	VPN peer addr
I32 zxr10L3vpnPeerPolStatisPriority	1.3.6.1.4.1.3902.3.105.1.2.1.1.3	Integer32	not-accessible	Priority
C64 zxr10L3vpnPeerPolStatisOutPkts	1.3.6.1.4.1.3902.3.105.1.2.1.1.4	Counter64	read-only	Number of packets sent by the L3VPN peer
C64 zxr10L3vpnPeerPolStatisOutBytes	1.3.6.1.4.1.3902.3.105.1.2.1.1.5	Counter64	read-only	Number of bytes sent by the L3VPN peer
U32 zxr10L3vpnPeerPolStatisVpnID	1.3.6.1.4.1.3902.3.105.1.2.1.1.6	Unsigned32	read-only	VPN ID

RFC description

ZTE ZXR10 platform MIB for Layer 3 VPN statistics and monitoring; vendor-private.

Start monitoring ZTE ZXR10 provider-edge (PE) router (per-VRF traffic packet/byte counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-L3VPN-STAT-MIB