All MIBs › ZXR10-IF-STAT-MIB
Organization: ZTE Corporation
Last Updated: 2017-07-25
Category: ZTE ZXR10 Interface and Statistics
Description: Provides ZTE ZXR10 per-interface traffic statistics including packet and byte counters for ingress and egress flows.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-IF-STAT-MIB?
ZXR10-IF-STAT-MIB is a ZTE proprietary SNMP module for the ZXR10 platform that provides per-physical-interface traffic statistics, extending beyond the standard IF-MIB counters with vendor-specific detail. It exposes performance-counter data including inbound and outbound octet, unicast packet, discard, error, and unknown-protocol counts for each physical interface. This MIB is a core tool for monitoring the traffic-handling performance and software health of interfaces on the device, letting operators spot rising error or discard rates that indicate cabling problems, congestion, or misconfiguration well before a link fails outright. It closely parallels and likely complements the standard IETF IF-MIB, adding ZTE-specific physical-interface identification and counters. It is deployed on ZTE ZXR10 routers/switches in networks that need detailed per-interface traffic and error visibility for troubleshooting and capacity planning. Engineers can download the ZXR10-IF-STAT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IF-STAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 router/switch
Monitoring Examples
An operator polls the zxr10PhyIfStatTable/zxr10PhyIfStatEntry, indexed by zxr10PhyIfName, to retrieve zxr10PhyIfInOctets, zxr10PhyIfInUcastPkts, zxr10PhyIfInDiscards, zxr10PhyIfInErrors, and the corresponding zxr10PhyIfOutOctets/OutUcastPkts/OutDiscards/OutErrors fields. A sudden rise in zxr10PhyIfInErrors or zxr10PhyIfInUnknownProtos on a specific interface would point to a failing transceiver, duplex mismatch, or unexpected traffic type arriving on that port.
What Can Be Monitored
- per-interface inbound/outbound octets
- unicast packet counts
- interface discards
- interface errors
- unknown protocol counts
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION |
From ZXR10-SMI
| zxr10RosngMIB | OBJECT-IDENTITY |
How to Use in IPNetwork Monitor
Example using zxr10IfTrafficStatInPkts OID:
Select a ZTE ZXR10 router/switch (per-physical-interface octet/packet/discard/error counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10IfTrafficStatInPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports in packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxr10GreTunnelStatEntry | 1.3.6.1.4.1.3902.3.6000.150.12.1 | not-accessible | An entry containing statistices information of a GRE tunnel. | |
| STR zxr10GreTunnelStatIfName | 1.3.6.1.4.1.3902.3.6000.150.12.1.1 | DisplayString | not-accessible | GRE tunnel name. |
| C64 zxr10GreTunnelStatInBytes | 1.3.6.1.4.1.3902.3.6000.150.12.1.2 | Counter64 | read-only | GRE tunnel in bytes. |
| C64 zxr10GreTunnelStatInDropBytes | 1.3.6.1.4.1.3902.3.6000.150.12.1.6 | Counter64 | read-only | GRE tunnel in drop bytes. |
| C64 zxr10GreTunnelStatInDropPkts | 1.3.6.1.4.1.3902.3.6000.150.12.1.7 | Counter64 | read-only | GRE tunnel in drop packets. |
| C64 zxr10GreTunnelStatInPkts | 1.3.6.1.4.1.3902.3.6000.150.12.1.3 | Counter64 | read-only | GRE tunnel in packets. |
| C64 zxr10GreTunnelStatOutBytes | 1.3.6.1.4.1.3902.3.6000.150.12.1.4 | Counter64 | read-only | GRE tunnel out bytes. |
| C64 zxr10GreTunnelStatOutDropBytes | 1.3.6.1.4.1.3902.3.6000.150.12.1.8 | Counter64 | read-only | GRE tunnel out drop bytes. |
| C64 zxr10GreTunnelStatOutDropPkts | 1.3.6.1.4.1.3902.3.6000.150.12.1.9 | Counter64 | read-only | GRE tunnel out drop packets. |
| C64 zxr10GreTunnelStatOutPkts | 1.3.6.1.4.1.3902.3.6000.150.12.1.5 | Counter64 | read-only | GRE tunnel out packets. |
| zxr10GreTunnelStatTable | 1.3.6.1.4.1.3902.3.6000.150.12 | not-accessible | A list of GRE tunnel statistices entries. | |
| zxr10IfHwCountersEntry | 1.3.6.1.4.1.3902.3.6000.150.10.1 | not-accessible | ||
| STR zxr10IfHwCountersIfName | 1.3.6.1.4.1.3902.3.6000.150.10.1.1 | DisplayString | not-accessible | Interface name. |
| I32 zxr10IfHwCountersInCrcRatio | 1.3.6.1.4.1.3902.3.6000.150.10.1.2 | Integer32 | read-only | Receiving CRC errors ratio of hardware counters. |
| I32 zxr10IfHwCountersOutCrcRatio | 1.3.6.1.4.1.3902.3.6000.150.10.1.3 | Integer32 | read-only | Sending CRC errors ratio of hardware counters. |
| zxr10IfHwCountersTable | 1.3.6.1.4.1.3902.3.6000.150.10 | not-accessible | ||
| zxr10IfIPv6StatsEntry | 1.3.6.1.4.1.3902.3.6000.150.9.1 | not-accessible | ||
| STR zxr10IfIPv6StatsIfName | 1.3.6.1.4.1.3902.3.6000.150.9.1.1 | DisplayString | not-accessible | Interface name. |
| C64 zxr10IfIPv6StatsInBytesSpeed | 1.3.6.1.4.1.3902.3.6000.150.9.1.2 | Counter64 | read-only | IPv6 traffic receiving bytes rate. |
| I32 zxr10IfIPv6StatsInDiscPktsRatio | 1.3.6.1.4.1.3902.3.6000.150.9.1.6 | Integer32 | read-only | IPv6 traffic receiving discarded package ratio. |
| C64 zxr10IfIPv6StatsInPktsSpeed | 1.3.6.1.4.1.3902.3.6000.150.9.1.4 | Counter64 | read-only | IPv6 traffic receiving package rate. |
| I32 zxr10IfIPv6StatsInUtilization | 1.3.6.1.4.1.3902.3.6000.150.9.1.8 | Integer32 | read-only | IPv6 traffic receiving bandwidth utilization. |
| C64 zxr10IfIPv6StatsOutBytesSpeed | 1.3.6.1.4.1.3902.3.6000.150.9.1.3 | Counter64 | read-only | IPv6 traffic sending bytes rate. |
| I32 zxr10IfIPv6StatsOutDiscPktsRatio | 1.3.6.1.4.1.3902.3.6000.150.9.1.7 | Integer32 | read-only | IPv6 traffic sending discarded package ratio. |
| C64 zxr10IfIPv6StatsOutPktsSpeed | 1.3.6.1.4.1.3902.3.6000.150.9.1.5 | Counter64 | read-only | IPv6 traffic sending package rate. |
| I32 zxr10IfIPv6StatsOutUtilization | 1.3.6.1.4.1.3902.3.6000.150.9.1.9 | Integer32 | read-only | IPv6 traffic sending bandwidth utilization. |
| I32 zxr10IfIPv6StatsSystemUpTime | 1.3.6.1.4.1.3902.3.6000.150.9.1.10 | Integer32 | read-only | IPv6 traffic system up time. |
| zxr10IfIPv6StatsTable | 1.3.6.1.4.1.3902.3.6000.150.9 | not-accessible | ||
| I32 zxr10IfPerf1MinPeakAllIntf | 1.3.6.1.4.1.3902.3.6000.150.6.1.2 | Integer32 | not-accessible | Clear all interface one minute peak,valid for all interface when this item is 255 and zxr10IfPerf1MinPeakIfName is blank. If zxr10IfPerf1MinPeakAllIntf is 0,only zxr10IfPerf1MinPeakIfName is valid. |
| I32 zxr10IfPerf1MinPeakClearAllIntf | 1.3.6.1.4.1.3902.3.6000.150.3.3 | Integer32 | read-write | Clear all interface one minute peak,255 is valid,0 is invalid. Value of read is 0. |
| STR zxr10IfPerf1MinPeakClearIfName | 1.3.6.1.4.1.3902.3.6000.150.3.2 | DisplayString | read-write | Interface name for clear one minute peak. |
| SWI zxr10IfPerf1MinPeakEnable | 1.3.6.1.4.1.3902.3.6000.150.6.1.3 | Switch | read-create | One minute peak switch.This config can be deleted by row status destroy(6). |
| zxr10IfPerf1MinPeakEntry | 1.3.6.1.4.1.3902.3.6000.150.6.1 | not-accessible | ||
| STR zxr10IfPerf1MinPeakIfName | 1.3.6.1.4.1.3902.3.6000.150.6.1.1 | DisplayString | not-accessible | Interface name.This must be blank when zxr10IfPerf1MinPeakAllIntf is valid. |
| ROW zxr10IfPerf1MinPeakRowStatus | 1.3.6.1.4.1.3902.3.6000.150.6.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfPerf1MinPeakTable | 1.3.6.1.4.1.3902.3.6000.150.6 | not-accessible | ||
| SWI zxr10IfPerfGlobalEnableFlag | 1.3.6.1.4.1.3902.3.6000.150.3.1 | Switch | read-write | Interface performance global switch,1(enable),0(disable),default is 1. |
| U32 zxr10IfPerfGlobalRateStatPeriod | 1.3.6.1.4.1.3902.3.6000.150.3.6 | Unsigned32 | read-write | The interface rate count period.Rate period which is a multiple of 10 (sec). |
| zxr10IfPerfGlobalSwitchObject | 1.3.6.1.4.1.3902.3.6000.150.3 | |||
| U32 zxr10IfPerfLimitCountHigh | 1.3.6.1.4.1.3902.3.6000.150.7.1.6 | Unsigned32 | read-create | Performance count high limit.Value range is from 1 to 4294967295. It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4. |
| U32 zxr10IfPerfLimitCountLow | 1.3.6.1.4.1.3902.3.6000.150.7.1.5 | Unsigned32 | read-create | Performance count low limit.Value range is from 0 to 4294967294. It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4. |
| zxr10IfPerfLimitEntry | 1.3.6.1.4.1.3902.3.6000.150.7.1 | not-accessible | ||
| STR zxr10IfPerfLimitIfName | 1.3.6.1.4.1.3902.3.6000.150.7.1.1 | DisplayString | not-accessible | Interface name.This can set performance limit for physical interface or son interface. |
| I32 zxr10IfPerfLimitRatioHigh | 1.3.6.1.4.1.3902.3.6000.150.7.1.4 | Integer32 | read-create | Performance ratio high limit.Value range is from 1 to 100,default is 100.It can not be set when zxr10IfPerfLimitType is 3. |
| I32 zxr10IfPerfLimitRatioLow | 1.3.6.1.4.1.3902.3.6000.150.7.1.3 | Integer32 | read-create | Performance ratio low limit.Value range is from 0 to 99,default is 0.It can not be set when zxr10IfPerfLimitType is 3. |
| ROW zxr10IfPerfLimitRowStatus | 1.3.6.1.4.1.3902.3.6000.150.7.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfPerfLimitTable | 1.3.6.1.4.1.3902.3.6000.150.7 | not-accessible | ||
| I32 zxr10IfPerfLimitType | 1.3.6.1.4.1.3902.3.6000.150.7.1.2 | Integer32 | not-accessible | Performance limit type.Value range of physical interface is from 1 to 4.1 is InputRatio limit,2 is OutputRatio limit,3 is FcserrCount limit,4 is FcserrRatio.Value range of son interface is from 1 to 2.1 is InputRatio limit,2 is OutputRatio limit. |
| SWI zxr10IfPerfSpecialIfSwitchEnable | 1.3.6.1.4.1.3902.3.6000.150.5.1.2 | Switch | read-create | Interface performance switch,1(enable).This config can be deleted by row status destroy(6). |
| zxr10IfPerfSpecialIfSwitchEntry | 1.3.6.1.4.1.3902.3.6000.150.5.1 | not-accessible | ||
| STR zxr10IfPerfSpecialIfSwitchIfName | 1.3.6.1.4.1.3902.3.6000.150.5.1.1 | DisplayString | not-accessible | Interface name. |
| ROW zxr10IfPerfSpecialIfSwitchRowStatus | 1.3.6.1.4.1.3902.3.6000.150.5.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfPerfSpecialIfSwitchTable | 1.3.6.1.4.1.3902.3.6000.150.5 | not-accessible | ||
| zxr10IfPerfSubIfLimitEntry | 1.3.6.1.4.1.3902.3.6000.150.8.1 | not-accessible | ||
| STR zxr10IfPerfSubIfLimitIfName | 1.3.6.1.4.1.3902.3.6000.150.8.1.1 | DisplayString | not-accessible | Physical interface name. |
| I32 zxr10IfPerfSubIfLimitRatioHigh | 1.3.6.1.4.1.3902.3.6000.150.8.1.4 | Integer32 | read-create | Performance ratio high limit.Value range is from 1 to 100,default is 100. |
| I32 zxr10IfPerfSubIfLimitRatioLow | 1.3.6.1.4.1.3902.3.6000.150.8.1.3 | Integer32 | read-create | Performance ratio low limit.Value range is from 0 to 99,default is 0. |
| ROW zxr10IfPerfSubIfLimitRowStatus | 1.3.6.1.4.1.3902.3.6000.150.8.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfPerfSubIfLimitTable | 1.3.6.1.4.1.3902.3.6000.150.8 | not-accessible | ||
| I32 zxr10IfPerfSubIfLimitType | 1.3.6.1.4.1.3902.3.6000.150.8.1.2 | Integer32 | not-accessible | Performance limit type.Value range is from 1 to 2.1 is InputRatio limit,2 is OutputRatio limit. |
| SWI zxr10IfPerfSwitchEnable | 1.3.6.1.4.1.3902.3.6000.150.4.1.2 | Switch | read-create | Interface performance switch,1(enable).This config can be deleted by row status destroy(6). |
| zxr10IfPerfSwitchEntry | 1.3.6.1.4.1.3902.3.6000.150.4.1 | not-accessible | ||
| STR zxr10IfPerfSwitchIfName | 1.3.6.1.4.1.3902.3.6000.150.4.1.1 | DisplayString | not-accessible | Interface name. |
| ROW zxr10IfPerfSwitchRowStatus | 1.3.6.1.4.1.3902.3.6000.150.4.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfPerfSwitchTable | 1.3.6.1.4.1.3902.3.6000.150.4 | not-accessible | ||
| I32 zxr10IfPerfValueClearAllIntf | 1.3.6.1.4.1.3902.3.6000.150.3.5 | Integer32 | read-write | Clear all interface performance value,255 is valid,0 is invalid. Value of read is 0. |
| STR zxr10IfPerfValueClearIfName | 1.3.6.1.4.1.3902.3.6000.150.3.4 | DisplayString | read-write | Interface name for clear performance value.Value of read is string which length is 0. |
| zxr10IfRateStatEntry | 1.3.6.1.4.1.3902.3.6000.150.20.1 | not-accessible | An entry containing interface rate statistices configuration. | |
| STR zxr10IfRateStatIfName | 1.3.6.1.4.1.3902.3.6000.150.20.1.1 | DisplayString | not-accessible | Interface name. |
| U32 zxr10IfRateStatPeriod | 1.3.6.1.4.1.3902.3.6000.150.20.1.2 | Unsigned32 | read-create | Interface rate period. Rate period which is a multiple of 10 (sec). |
| ROW zxr10IfRateStatRowStatus | 1.3.6.1.4.1.3902.3.6000.150.20.1.100 | RowStatus | read-create | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| zxr10IfRateStatTable | 1.3.6.1.4.1.3902.3.6000.150.20 | not-accessible | A list of interface rate statistices configuration entries. | |
| zxr10IfRatioGatherEntry | 1.3.6.1.4.1.3902.3.6000.150.16.1 | not-accessible | Interface RatioGather Table Entry | |
| STR zxr10IfRatioGatherIfName | 1.3.6.1.4.1.3902.3.6000.150.16.1.1 | DisplayString | not-accessible | Interface name |
| I32 zxr10IfRatioGatherInDrpPkts | 1.3.6.1.4.1.3902.3.6000.150.16.1.4 | Integer32 | read-only | Interface Received Ratio of Discards Packets |
| I32 zxr10IfRatioGatherInErrPkts | 1.3.6.1.4.1.3902.3.6000.150.16.1.2 | Integer32 | read-only | Interface Received Ratio of Error Packets |
| I32 zxr10IfRatioGatherInUtilization | 1.3.6.1.4.1.3902.3.6000.150.16.1.6 | Integer32 | read-only | Interface Utilization of Received Packets |
| I32 zxr10IfRatioGatherOutDrpPkts | 1.3.6.1.4.1.3902.3.6000.150.16.1.5 | Integer32 | read-only | Interface Sent Ratio of Discards Packets |
| I32 zxr10IfRatioGatherOutErrPkts | 1.3.6.1.4.1.3902.3.6000.150.16.1.3 | Integer32 | read-only | Interface Sent Ratio of Error Packets |
| I32 zxr10IfRatioGatherOutUtilization | 1.3.6.1.4.1.3902.3.6000.150.16.1.7 | Integer32 | read-only | Interface Utilization of Sent Packets |
| zxr10IfRatioGatherTable | 1.3.6.1.4.1.3902.3.6000.150.16 | not-accessible | Interface RatioGather Table | |
| zxr10IfSpeedGatherEntry | 1.3.6.1.4.1.3902.3.6000.150.17.1 | not-accessible | Interface SpeedGather Table Entry | |
| STR zxr10IfSpeedGatherIfName | 1.3.6.1.4.1.3902.3.6000.150.17.1.1 | DisplayString | not-accessible | Interface name |
| C64 zxr10IfSpeedGatherInBitSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.10 | Counter64 | read-only | Interface Received Rate of Bits |
| C64 zxr10IfSpeedGatherInBPeakSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.6 | Counter64 | read-only | Interface Received Peak Rate of Bytes |
| STR zxr10IfSpeedGatherInBPeakTime | 1.3.6.1.4.1.3902.3.6000.150.17.1.7 | DisplayString | read-only | Interface Received Peak Rate Time of Bytes |
| C64 zxr10IfSpeedGatherInByteSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.2 | Counter64 | read-only | Interface Received Rate of Bytes |
| C64 zxr10IfSpeedGatherInPktsSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.4 | Counter64 | read-only | Interface Received Rate of Packets |
| C64 zxr10IfSpeedGatherOutBitSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.11 | Counter64 | read-only | Interface Sent Rate of Bits |
| C64 zxr10IfSpeedGatherOutBPeakSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.8 | Counter64 | read-only | Interface Sent Peak Rate of Bytes |
| STR zxr10IfSpeedGatherOutBPeakTime | 1.3.6.1.4.1.3902.3.6000.150.17.1.9 | DisplayString | read-only | Interface Sent Peak Rate Time of Bytes |
| C64 zxr10IfSpeedGatherOutByteSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.3 | Counter64 | read-only | Interface Sent Rate of Bytes |
| C64 zxr10IfSpeedGatherOutPktsSpeed | 1.3.6.1.4.1.3902.3.6000.150.17.1.5 | Counter64 | read-only | Interface Sent Rate of Packets |
| zxr10IfSpeedGatherTable | 1.3.6.1.4.1.3902.3.6000.150.17 | not-accessible | Interface SpeedGather Table | |
| zxr10IfStatMIB | 1.3.6.1.4.1.3902.3.6000.150 | |||
| zxr10IfTrafficStatEntry | 1.3.6.1.4.1.3902.3.6000.150.1.1 | not-accessible | ||
| NUM zxr10IfTrafficStatIfIndex | 1.3.6.1.4.1.3902.3.6000.150.1.1.1 | InterfaceIndex | read-only | Interface index |
| STR zxr10IfTrafficStatIfName | 1.3.6.1.4.1.3902.3.6000.150.1.1.2 | DisplayString | read-only | Interface name |
| C64 zxr10IfTrafficStatInAddrErrorsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.8 | Counter64 | read-only | ipSystemStatsInAddrErrorsV4 |
| C64 zxr10IfTrafficStatInAddrErrorsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.19 | Counter64 | read-only | ipSystemStatsInAddrErrorsV6 |
| C64 zxr10IfTrafficStatInBcastPktsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.10 | Counter64 | read-only | ipSystemStatsInBcastPktsV4 |
| C64 zxr10IfTrafficStatInBcastPktsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.20 | Counter64 | read-only | ipSystemStatsInBcastPktsV6 |
| C64 zxr10IfTrafficStatInDiscardsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.13 | Counter64 | read-only | ipSystemStatsInDiscardsV4 |
| C64 zxr10IfTrafficStatInDiscardsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.23 | Counter64 | read-only | ipSystemStatsInDiscardsV6 |
| C64 zxr10IfTrafficStatInForwDatagramsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.14 | Counter64 | read-only | ipSystemStatsInForwDatagramsV4 |
| C64 zxr10IfTrafficStatInForwDatagramsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.24 | Counter64 | read-only | ipSystemStatsInForwDatagramsV6 |
| C64 zxr10IfTrafficStatInHdrErrorsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.7 | Counter64 | read-only | ipSystemStatsInHdrErrorsV4 |
| C64 zxr10IfTrafficStatInHdrErrorsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.17 | Counter64 | read-only | ipSystemStatsInHdrErrorsV6 |
| C64 zxr10IfTrafficStatInNoRoutesV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.11 | Counter64 | read-only | ipSystemStatsInNoRoutesV4 |
| C64 zxr10IfTrafficStatInNoRoutesV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.21 | Counter64 | read-only | ipSystemStatsInNoRoutesV6 |
| C64 zxr10IfTrafficStatInOctetsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.6 | Counter64 | read-only | ipSystemStatsInOctetsV4 |
| C64 zxr10IfTrafficStatInOctetsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.16 | Counter64 | read-only | ipSystemStatsInOctetsV6 |
| C64 zxr10IfTrafficStatInPktsEx | 1.3.6.1.4.1.3902.3.6000.150.1.1.3 | Counter64 | read-only | In packets |
| C64 zxr10IfTrafficStatInReceivesV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.5 | Counter64 | read-only | ipSystemStatsInReceivesV4 |
| C64 zxr10IfTrafficStatInReceivesV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.15 | Counter64 | read-only | ipSystemStatsInReceivesV6 |
| C64 zxr10IfTrafficStatInTruncatedPktsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.9 | Counter64 | read-only | ipSystemStatsInTruncatedPktsV4 |
| C64 zxr10IfTrafficStatInTruncatedPktsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.18 | Counter64 | read-only | ipSystemStatsInTruncatedPktsV6 |
| C64 zxr10IfTrafficStatInUnknownProtosV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.12 | Counter64 | read-only | ipSystemStatsInUnknownProtosV4 |
| C64 zxr10IfTrafficStatInUnknownProtosV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.22 | Counter64 | read-only | ipSystemStatsInUnknownProtosV6 |
| C64 zxr10IfTrafficStatInUpsendCarDrop | 1.3.6.1.4.1.3902.3.6000.150.1.1.31 | Counter64 | read-only | ipSystemStatsInUpsendCarDrop |
| C64 zxr10IfTrafficStatInV4UrpfDrpPkts | 1.3.6.1.4.1.3902.3.6000.150.1.1.37 | Counter64 | read-only | ipSystemStatsInV4UrpfDrpPkts |
| C64 zxr10IfTrafficStatInV6UrpfDrpPkts | 1.3.6.1.4.1.3902.3.6000.150.1.1.38 | Counter64 | read-only | ipSystemStatsInV6UrpfDrpPkts |
| C64 zxr10IfTrafficStatOutDiscardsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.25 | Counter64 | read-only | ipSystemStatsOutDiscardsV4 |
| C64 zxr10IfTrafficStatOutDiscardsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.28 | Counter64 | read-only | ipSystemStatsOutDiscardsV6 |
| C64 zxr10IfTrafficStatOutForwDatagramsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.26 | Counter64 | read-only | ipSystemStatsOutForwDatagramsV4 |
| C64 zxr10IfTrafficStatOutForwDatagramsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.29 | Counter64 | read-only | ipSystemStatsOutForwDatagramsV6 |
| C64 zxr10IfTrafficStatOutFragReqdsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.27 | Counter64 | read-only | ipSystemStatsOutFragReqdsV4 |
| C64 zxr10IfTrafficStatOutFragReqdsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.30 | Counter64 | read-only | ipSystemStatsOutFragReqdsV6 |
| C64 zxr10IfTrafficStatOutOctetsV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.33 | Counter64 | read-only | ipSystemStatsOutOctetsV4 |
| C64 zxr10IfTrafficStatOutOctetsV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.35 | Counter64 | read-only | ipSystemStatOutOctetsV6 |
| C64 zxr10IfTrafficStatOutPkts | 1.3.6.1.4.1.3902.3.6000.150.1.1.4 | Counter64 | read-only | Out packets |
| C64 zxr10IfTrafficStatOutUpCarDrop | 1.3.6.1.4.1.3902.3.6000.150.1.1.36 | Counter64 | read-only | ipSystemStatsOutUpCarDrop |
| C64 zxr10IfTrafficStatOutV4 | 1.3.6.1.4.1.3902.3.6000.150.1.1.32 | Counter64 | read-only | ipSystemStatsOutV4 |
| C64 zxr10IfTrafficStatOutV6 | 1.3.6.1.4.1.3902.3.6000.150.1.1.34 | Counter64 | read-only | ipSystemStatOutV6 |
| zxr10IfTrafficStatTable | 1.3.6.1.4.1.3902.3.6000.150.1 | not-accessible | ||
| C32 zxr10IPLogicIfInDiscards | 1.3.6.1.4.1.3902.3.6000.150.14.1.5 | Counter32 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10IPLogicIfInErrors | 1.3.6.1.4.1.3902.3.6000.150.14.1.6 | Counter32 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. |
| C32 zxr10IPLogicIfInOctets | 1.3.6.1.4.1.3902.3.6000.150.14.1.2 | Counter32 | read-only | The total number of octets received on the interface, including framing characters. |
| C32 zxr10IPLogicIfInUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.14.1.3 | Counter32 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| C32 zxr10IPLogicIfInUnknownProtos | 1.3.6.1.4.1.3902.3.6000.150.14.1.7 | Counter32 | read-only | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. |
| STR zxr10IPLogicIfName | 1.3.6.1.4.1.3902.3.6000.150.14.1.1 | DisplayString | not-accessible | Interface name |
| C32 zxr10IPLogicIfOutDiscards | 1.3.6.1.4.1.3902.3.6000.150.14.1.11 | Counter32 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10IPLogicIfOutErrors | 1.3.6.1.4.1.3902.3.6000.150.14.1.12 | Counter32 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
| C32 zxr10IPLogicIfOutOctets | 1.3.6.1.4.1.3902.3.6000.150.14.1.8 | Counter32 | read-only | The total number of octets transmitted out of the interface, including framing characters. |
| C32 zxr10IPLogicIfOutUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.14.1.9 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
| zxr10IPLogicIfStatEntry | 1.3.6.1.4.1.3902.3.6000.150.14.1 | not-accessible | IPv4/v6 Interface statistics Table Entry | |
| zxr10IPLogicIfStatTable | 1.3.6.1.4.1.3902.3.6000.150.14 | not-accessible | IPv4/v6 Interface statistics Table | |
| C32 zxr10NoIPLogicIfInDiscards | 1.3.6.1.4.1.3902.3.6000.150.15.1.5 | Counter32 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10NoIPLogicIfInErrors | 1.3.6.1.4.1.3902.3.6000.150.15.1.6 | Counter32 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. |
| C32 zxr10NoIPLogicIfInOctets | 1.3.6.1.4.1.3902.3.6000.150.15.1.2 | Counter32 | read-only | The total number of octets received on the interface, including framing characters. |
| C32 zxr10NoIPLogicIfInUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.15.1.3 | Counter32 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| C32 zxr10NoIPLogicIfInUnknownProtos | 1.3.6.1.4.1.3902.3.6000.150.15.1.7 | Counter32 | read-only | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. |
| STR zxr10NoIPLogicIfName | 1.3.6.1.4.1.3902.3.6000.150.15.1.1 | DisplayString | not-accessible | Interface name |
| C32 zxr10NoIPLogicIfOutDiscards | 1.3.6.1.4.1.3902.3.6000.150.15.1.11 | Counter32 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10NoIPLogicIfOutErrors | 1.3.6.1.4.1.3902.3.6000.150.15.1.12 | Counter32 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
| C32 zxr10NoIPLogicIfOutOctets | 1.3.6.1.4.1.3902.3.6000.150.15.1.8 | Counter32 | read-only | The total number of octets transmitted out of the interface, including framing characters. |
| C32 zxr10NoIPLogicIfOutUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.15.1.9 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
| zxr10NoIPLogicIfStatEntry | 1.3.6.1.4.1.3902.3.6000.150.15.1 | not-accessible | No IPv4/v6 Interface statistics Table Entry | |
| zxr10NoIPLogicIfStatTable | 1.3.6.1.4.1.3902.3.6000.150.15 | not-accessible | No IPv4/v6 Interface statistics Table | |
| C32 zxr10PhyIfInDiscards | 1.3.6.1.4.1.3902.3.6000.150.13.1.5 | Counter32 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10PhyIfInErrors | 1.3.6.1.4.1.3902.3.6000.150.13.1.6 | Counter32 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. |
| C32 zxr10PhyIfInOctets | 1.3.6.1.4.1.3902.3.6000.150.13.1.2 | Counter32 | read-only | The total number of octets received on the interface, including framing characters. |
| C32 zxr10PhyIfInUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.13.1.3 | Counter32 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| C32 zxr10PhyIfInUnknownProtos | 1.3.6.1.4.1.3902.3.6000.150.13.1.7 | Counter32 | read-only | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. |
| STR zxr10PhyIfName | 1.3.6.1.4.1.3902.3.6000.150.13.1.1 | DisplayString | not-accessible | Interface name |
| C32 zxr10PhyIfOutDiscards | 1.3.6.1.4.1.3902.3.6000.150.13.1.11 | Counter32 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 zxr10PhyIfOutErrors | 1.3.6.1.4.1.3902.3.6000.150.13.1.12 | Counter32 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
| C32 zxr10PhyIfOutOctets | 1.3.6.1.4.1.3902.3.6000.150.13.1.8 | Counter32 | read-only | The total number of octets transmitted out of the interface, including framing characters. |
| C32 zxr10PhyIfOutUcastPkts | 1.3.6.1.4.1.3902.3.6000.150.13.1.9 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
| zxr10PhyIfStatEntry | 1.3.6.1.4.1.3902.3.6000.150.13.1 | not-accessible | PhySical Interface statistics Table Entry | |
| zxr10PhyIfStatTable | 1.3.6.1.4.1.3902.3.6000.150.13 | not-accessible | PhySical Interface statistics Table | |
| zxr10SpiStatEntry | 1.3.6.1.4.1.3902.3.6000.150.19.1 | not-accessible | An entry containing statistices information of a spi. | |
| STR zxr10SpiStatIfName | 1.3.6.1.4.1.3902.3.6000.150.19.1.1 | DisplayString | not-accessible | Spi name. |
| C64 zxr10SpiStatInBytes | 1.3.6.1.4.1.3902.3.6000.150.19.1.2 | Counter64 | read-only | Spi in bytes. |
| C64 zxr10SpiStatInCRCErrorPkts | 1.3.6.1.4.1.3902.3.6000.150.19.1.4 | Counter64 | read-only | Spi in CRC-ERROR packets. |
| C64 zxr10SpiStatInDropPkts | 1.3.6.1.4.1.3902.3.6000.150.19.1.7 | Counter64 | read-only | Spi in drop packets. |
| C64 zxr10SpiStatInPkts | 1.3.6.1.4.1.3902.3.6000.150.19.1.3 | Counter64 | read-only | Spi in packets. |
| C64 zxr10SpiStatOutBytes | 1.3.6.1.4.1.3902.3.6000.150.19.1.5 | Counter64 | read-only | Spi out bytes. |
| C64 zxr10SpiStatOutDropPkts | 1.3.6.1.4.1.3902.3.6000.150.19.1.8 | Counter64 | read-only | Spi out drop packets. |
| C64 zxr10SpiStatOutPkts | 1.3.6.1.4.1.3902.3.6000.150.19.1.6 | Counter64 | read-only | Spi out packets. |
| zxr10SpiStatTable | 1.3.6.1.4.1.3902.3.6000.150.19 | not-accessible | A list of Spi statistices entries. | |
| zxr10TeIfTrafficStatEntry | 1.3.6.1.4.1.3902.3.6000.150.2.1 | not-accessible | ||
| NUM zxr10TeIfTrafficStatIfIndex | 1.3.6.1.4.1.3902.3.6000.150.2.1.2 | InterfaceIndex | read-only | Te tunnel interface index |
| STR zxr10TeIfTrafficStatIfName | 1.3.6.1.4.1.3902.3.6000.150.2.1.3 | DisplayString | read-only | Te tunnel interface name |
| C64 zxr10TeIfTrafficStatInBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.31 | Counter64 | read-only | Te tunnel interface in bytes |
| C64 zxr10TeIfTrafficStatInDiscBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.33 | Counter64 | read-only | Te tunnel interface in discard bytes |
| C64 zxr10TeIfTrafficStatInDiscPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.34 | Counter64 | read-only | Te tunnel interface in discard packets |
| C64 zxr10TeIfTrafficStatInPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.32 | Counter64 | read-only | Te tunnel interface in packets |
| C64 zxr10TeIfTrafficStatInPNBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.37 | Counter64 | read-only | Te tunnel interface reverse receiving bytes of Node-P |
| C64 zxr10TeIfTrafficStatInPNPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.38 | Counter64 | read-only | Te tunnel interface reverse receiving packets of Node-P |
| C64 zxr10TeIfTrafficStatOutBandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.6 | Counter64 | read-only | Te tunnel interface out bandwidth |
| C64 zxr10TeIfTrafficStatOutBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.4 | Counter64 | read-only | Te tunnel interface out bytes |
| C64 zxr10TeIfTrafficStatOutDiscBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.35 | Counter64 | read-only | Te tunnel interface out discard bytes |
| C64 zxr10TeIfTrafficStatOutDiscPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.36 | Counter64 | read-only | Te tunnel interface out discard packets |
| C64 zxr10TeIfTrafficStatOutPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.5 | Counter64 | read-only | Te tunnel interface out packets |
| C64 zxr10TeIfTrafficStatOutPNBytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.39 | Counter64 | read-only | Te tunnel interface reverse sending bytes of Node-P |
| C64 zxr10TeIfTrafficStatOutPNPkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.40 | Counter64 | read-only | Te tunnel interface reverse sending packets of Node-P |
| C64 zxr10TeIfTrafficStatOutPri0Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.9 | Counter64 | read-only | Te tunnel interface priority 0 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri0Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.7 | Counter64 | read-only | Te tunnel interface priority 0 out bytes |
| C64 zxr10TeIfTrafficStatOutPri0Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.8 | Counter64 | read-only | Te tunnel interface priority 0 out packets |
| C64 zxr10TeIfTrafficStatOutPri1Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.12 | Counter64 | read-only | Te tunnel interface priority 1 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri1Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.10 | Counter64 | read-only | Te tunnel interface priority 1 out bytes |
| C64 zxr10TeIfTrafficStatOutPri1Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.11 | Counter64 | read-only | Te tunnel interface priority 1 out packets |
| C64 zxr10TeIfTrafficStatOutPri2Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.15 | Counter64 | read-only | Te tunnel interface priority 2 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri2Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.13 | Counter64 | read-only | Te tunnel interface priority 2 out bytes |
| C64 zxr10TeIfTrafficStatOutPri2Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.14 | Counter64 | read-only | Te tunnel interface priority 2 out packets |
| C64 zxr10TeIfTrafficStatOutPri3Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.18 | Counter64 | read-only | Te tunnel interface priority 3 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri3Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.16 | Counter64 | read-only | Te tunnel interface priority 3 out bytes |
| C64 zxr10TeIfTrafficStatOutPri3Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.17 | Counter64 | read-only | Te tunnel interface priority 3 out packets |
| C64 zxr10TeIfTrafficStatOutPri4Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.21 | Counter64 | read-only | Te tunnel interface priority 4 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri4Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.19 | Counter64 | read-only | Te tunnel interface priority 4 out bytes |
| C64 zxr10TeIfTrafficStatOutPri4Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.20 | Counter64 | read-only | Te tunnel interface priority 4 out packets |
| C64 zxr10TeIfTrafficStatOutPri5Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.24 | Counter64 | read-only | Te tunnel interface priority 5 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri5Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.22 | Counter64 | read-only | Te tunnel interface priority 5 out bytes |
| C64 zxr10TeIfTrafficStatOutPri5Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.23 | Counter64 | read-only | Te tunnel interface priority 5 out packets |
| C64 zxr10TeIfTrafficStatOutPri6Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.27 | Counter64 | read-only | Te tunnel interface priority 6 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri6Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.25 | Counter64 | read-only | Te tunnel interface priority 6 out bytes |
| C64 zxr10TeIfTrafficStatOutPri6Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.26 | Counter64 | read-only | Te tunnel interface priority 6 out packets |
| C64 zxr10TeIfTrafficStatOutPri7Bandwidth | 1.3.6.1.4.1.3902.3.6000.150.2.1.30 | Counter64 | read-only | Te tunnel interface priority 7 out bandwidth |
| C64 zxr10TeIfTrafficStatOutPri7Bytes | 1.3.6.1.4.1.3902.3.6000.150.2.1.28 | Counter64 | read-only | Te tunnel interface priority 7 out bytes |
| C64 zxr10TeIfTrafficStatOutPri7Pkts | 1.3.6.1.4.1.3902.3.6000.150.2.1.29 | Counter64 | read-only | Te tunnel interface priority 7 out packets |
| zxr10TeIfTrafficStatTable | 1.3.6.1.4.1.3902.3.6000.150.2 | not-accessible | ||
| I32 zxr10TeIfTrafficStatTeTunnelID | 1.3.6.1.4.1.3902.3.6000.150.2.1.1 | Integer32 | not-accessible | Te tunnel ID |
| zxr10VxLanTunnelStatEntry | 1.3.6.1.4.1.3902.3.6000.150.18.1 | not-accessible | An entry containing statistices information of a VxLan tunnel. | |
| STR zxr10VxLanTunnelStatIfName | 1.3.6.1.4.1.3902.3.6000.150.18.1.1 | DisplayString | not-accessible | VxLan Tunnel name. |
| C64 zxr10VxLanTunnelStatInBytes | 1.3.6.1.4.1.3902.3.6000.150.18.1.2 | Counter64 | read-only | VxLan Tunnel in bytes. |
| C64 zxr10VxLanTunnelStatInDropBytes | 1.3.6.1.4.1.3902.3.6000.150.18.1.6 | Counter64 | read-only | VxLan Tunnel in drop bytes. |
| C64 zxr10VxLanTunnelStatInDropPkts | 1.3.6.1.4.1.3902.3.6000.150.18.1.7 | Counter64 | read-only | VxLan Tunnel in drop packets. |
| C64 zxr10VxLanTunnelStatInPkts | 1.3.6.1.4.1.3902.3.6000.150.18.1.3 | Counter64 | read-only | VxLan Tunnel in packets. |
| C64 zxr10VxLanTunnelStatOutBytes | 1.3.6.1.4.1.3902.3.6000.150.18.1.4 | Counter64 | read-only | VxLan Tunnel out bytes. |
| C64 zxr10VxLanTunnelStatOutDropBytes | 1.3.6.1.4.1.3902.3.6000.150.18.1.8 | Counter64 | read-only | VxLan Tunnel out drop bytes. |
| C64 zxr10VxLanTunnelStatOutDropPkts | 1.3.6.1.4.1.3902.3.6000.150.18.1.9 | Counter64 | read-only | VxLan Tunnel out drop packets. |
| C64 zxr10VxLanTunnelStatOutPkts | 1.3.6.1.4.1.3902.3.6000.150.18.1.5 | Counter64 | read-only | VxLan Tunnel out packets. |
| zxr10VxLanTunnelStatTable | 1.3.6.1.4.1.3902.3.6000.150.18 | not-accessible | A list of VxLan tunnel statistices entries. | |
| zxr10WlanBssCountersEntry | 1.3.6.1.4.1.3902.3.6000.150.11.1 | not-accessible | ||
| STR zxr10WlanBssCountersIfName | 1.3.6.1.4.1.3902.3.6000.150.11.1.1 | DisplayString | not-accessible | Interface name. |
| C64 zxr10WlanBssCountersInBytes | 1.3.6.1.4.1.3902.3.6000.150.11.1.2 | Counter64 | read-only | Wlan Bss interface in bytes. |
| C64 zxr10WlanBssCountersInDrop | 1.3.6.1.4.1.3902.3.6000.150.11.1.5 | Counter64 | read-only | Wlan Bss interface in drop counters. |
| C64 zxr10WlanBssCountersInErrs | 1.3.6.1.4.1.3902.3.6000.150.11.1.4 | Counter64 | read-only | Wlan Bss interface in Errors. |
| C64 zxr10WlanBssCountersInOverFlow | 1.3.6.1.4.1.3902.3.6000.150.11.1.6 | Counter64 | read-only | Wlan Bss interface in fifo overflow counters. |
| C64 zxr10WlanBssCountersInPkts | 1.3.6.1.4.1.3902.3.6000.150.11.1.3 | Counter64 | read-only | Wlan Bss interface in packets. |
| C64 zxr10WlanBssCountersOutBytes | 1.3.6.1.4.1.3902.3.6000.150.11.1.7 | Counter64 | read-only | Wlan Bss interface in drop counters. |
| C64 zxr10WlanBssCountersOutDrop | 1.3.6.1.4.1.3902.3.6000.150.11.1.10 | Counter64 | read-only | Wlan Bss interface out drop counters. |
| C64 zxr10WlanBssCountersOutErrs | 1.3.6.1.4.1.3902.3.6000.150.11.1.9 | Counter64 | read-only | Wlan Bss interface out errors. |
| C64 zxr10WlanBssCountersOutPkts | 1.3.6.1.4.1.3902.3.6000.150.11.1.8 | Counter64 | read-only | Wlan Bss interface out packets. |
| zxr10WlanBssCountersTable | 1.3.6.1.4.1.3902.3.6000.150.11 | not-accessible |
RFC description
Monitors interface traffic statistics and performance metrics across multiple port types on ZTE network devices.
Start monitoring ZTE ZXR10 router/switch (per-physical-interface octet/packet/discard/error counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.