ZTE-AN-SERVICE-PORT-PERF-MIB

All MIBs › ZTE-AN-SERVICE-PORT-PERF-MIB

Organization: ZTE Corporation

Last Updated: 2015-12-17

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node service port traffic performance counters for subscriber SLA verification.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-SERVICE-PORT-PERF-MIB?

ZTE-AN-SERVICE-PORT-PERF-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing per-service-port traffic performance statistics on ZTE access-network equipment on ZTE ZXR10 carrier routers/switches. Its objects cover a current-statistics table (inbound/outbound octets and octet/packet rates, with a reset action) and current 1-minute/1-day performance-history tables recording the same metrics per elapsed interval. As a configuration/status MIB it lets an administrator audit and monitor per-service-port traffic performance statistics on ZTE access-network equipment on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZTE-AN-SERVICE-PORT-PERF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-SERVICE-PORT-PERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm per-service-port traffic performance statistics on ZTE access-network equipment is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

per-service-port traffic performance statistics on ZTE access-network equipment

Imported Objects

From HC-PerfHist-TC-MIB

HCPerfTimeElapsed

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
RowStatus

From ZTE-AN-IF-MIB

zxAnSubIfIndex

OBJECT-TYPE

From ZTE-AN-SMI

zxAnServiceProvision

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxAnSrvPortCurrStatsInOctets OID:

Select a ZTE ZXR10 carrier routers/switch (per-service-port inbound/outbound traffic-rate status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnSrvPortCurrStatsInOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of octets received on the service port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnServicePortPerfMib	1.3.6.1.4.1.3902.1082.110.21			The MIB module for the management of the service port performance.
zxAnServicePortPerfObjects	1.3.6.1.4.1.3902.1082.110.21.2
zxAnSrvPortCurrStatsTable	1.3.6.1.4.1.3902.1082.110.21.2.2		not-accessible	Current statistics data table of service port.
zxAnSrvPortCurrStatsEntry	1.3.6.1.4.1.3902.1082.110.21.2.2.1		not-accessible	A zxAnSrvPortCurrStatsTable entry.
I32 zxAnSrvPortCurrStatsVportId	1.3.6.1.4.1.3902.1082.110.21.2.2.1.1	Integer32	read-only	VPort ID from 1 to 128.
C64 zxAnSrvPortCurrStatsInOctetsEx	1.3.6.1.4.1.3902.1082.110.21.2.2.1.2	Counter64	read-only	The total number of octets received on the service port.
C64 zxAnSrvPortCurrStatsOutOctets	1.3.6.1.4.1.3902.1082.110.21.2.2.1.3	Counter64	read-only	The total number of octets transmitted from the service port.
G32 zxAnSrvPortCurrStatsInOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.2.1.4	Gauge32	read-only	Received octet rate of the service port.
G32 zxAnSrvPortCurrStatsOutOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.2.1.5	Gauge32	read-only	Transmitted octet rate of the service port.
C64 zxAnSrvPortCurrStatsInPkts	1.3.6.1.4.1.3902.1082.110.21.2.2.1.6	Counter64	read-only	Received packets of the service port.
C64 zxAnSrvPortCurrStatsOutPkts	1.3.6.1.4.1.3902.1082.110.21.2.2.1.7	Counter64	read-only	Transmitted packets of the service port.
INT zxAnSrvPortCurrStatsReset	1.3.6.1.4.1.3902.1082.110.21.2.2.1.49	INTEGER	read-create	Value 1 means to clear all the current performance value. When get this variable, always return 1.
ROW zxAnSrvPortCurrStatsRowStatus	1.3.6.1.4.1.3902.1082.110.21.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSrvPortCurrStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnSrvPortCurrMinPerfTable	1.3.6.1.4.1.3902.1082.110.21.2.10		not-accessible	The current minutes interval performance data table of the service port.
zxAnSrvPortCurrMinPerfEntry	1.3.6.1.4.1.3902.1082.110.21.2.10.1		not-accessible	The current minutes interval performance data entry of the service port.
HCP zxAnSrvPortCMinTimeElapsed	1.3.6.1.4.1.3902.1082.110.21.2.10.1.1	HCPerfTimeElapsed	read-only	Total elapsed seconds in this interval.
C64 zxAnSrvPortCMinInOctets	1.3.6.1.4.1.3902.1082.110.21.2.10.1.2	Counter64	read-only	Received octets.
C64 zxAnSrvPortCMinOutOctets	1.3.6.1.4.1.3902.1082.110.21.2.10.1.3	Counter64	read-only	Transmitted octets.
G32 zxAnSrvPortCMinInOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.10.1.4	Gauge32	read-only	Received octet rate.
G32 zxAnSrvPortCMinOutOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.10.1.5	Gauge32	read-only	Transmitted octet rate.
C64 zxAnSrvPortCMinInPkts	1.3.6.1.4.1.3902.1082.110.21.2.10.1.6	Counter64	read-only	Received packets.
C64 zxAnSrvPortCMinOutPkts	1.3.6.1.4.1.3902.1082.110.21.2.10.1.7	Counter64	read-only	Transmitted packets.
INT zxAnSrvPortCMinReset	1.3.6.1.4.1.3902.1082.110.21.2.10.1.100	INTEGER	read-write	Clear all the current minutes performance variables. When get this variable, always return 1.
zxAnSrvPortCurr1DayPerfTable	1.3.6.1.4.1.3902.1082.110.21.2.11		not-accessible	The current 1 day interval performance data table of the service port.
zxAnSrvPortCurr1DayPerfEntry	1.3.6.1.4.1.3902.1082.110.21.2.11.1		not-accessible	The current 1 day interval performance data entry of service port.
HCP zxAnSrvPortC1DTimeElapsed	1.3.6.1.4.1.3902.1082.110.21.2.11.1.1	HCPerfTimeElapsed	read-only	Total elapsed seconds in this interval.
C64 zxAnSrvPortC1DInOctets	1.3.6.1.4.1.3902.1082.110.21.2.11.1.2	Counter64	read-only	Received octets.
C64 zxAnSrvPortC1DOutOctets	1.3.6.1.4.1.3902.1082.110.21.2.11.1.3	Counter64	read-only	Transmitted octets.
G32 zxAnSrvPortC1DInOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.11.1.4	Gauge32	read-only	Received octet rate.
G32 zxAnSrvPortC1DOutOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.11.1.5	Gauge32	read-only	Transmitted octet rate.
C64 zxAnSrvPortC1DInPkts	1.3.6.1.4.1.3902.1082.110.21.2.11.1.6	Counter64	read-only	Received packets.
C64 zxAnSrvPortC1DOutPkts	1.3.6.1.4.1.3902.1082.110.21.2.11.1.7	Counter64	read-only	Transmitted packets.
INT zxAnSrvPortC1DReset	1.3.6.1.4.1.3902.1082.110.21.2.11.1.100	INTEGER	read-write	Clear all the current minutes performance variables. When get this variable, always return 1.
zxAnSrvPortHisMinPerfTable	1.3.6.1.4.1.3902.1082.110.21.2.12		not-accessible	The historical minutes interval performance data table of the service port.
zxAnSrvPortHisMinPerfEntry	1.3.6.1.4.1.3902.1082.110.21.2.12.1		not-accessible	The historical minutes interval performance data entry of the service port.
I32 zxAnSrvPortHMinIntervalNo	1.3.6.1.4.1.3902.1082.110.21.2.12.1.1	Integer32	not-accessible	Performance data interval number.
INT zxAnSrvPortHMinValidInterval	1.3.6.1.4.1.3902.1082.110.21.2.12.1.2	INTEGER	read-only	The validity of the data for this interval.
DAT zxAnSrvPortHMinDateTime	1.3.6.1.4.1.3902.1082.110.21.2.12.1.3	DateAndTime	read-only	The 15 minutes interval performance data generation time.
C64 zxAnSrvPortHMinInOctets	1.3.6.1.4.1.3902.1082.110.21.2.12.1.4	Counter64	read-only	Received octets.
C64 zxAnSrvPortHMinOutOctets	1.3.6.1.4.1.3902.1082.110.21.2.12.1.5	Counter64	read-only	Transmitted octets.
G32 zxAnSrvPortHMinInOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.12.1.6	Gauge32	read-only	Received octet rate.
G32 zxAnSrvPortHMinOutOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.12.1.7	Gauge32	read-only	Transmitted octet rate.
C64 zxAnSrvPortHMinInPkts	1.3.6.1.4.1.3902.1082.110.21.2.12.1.8	Counter64	read-only	Received packets.
C64 zxAnSrvPortHMinOutPkts	1.3.6.1.4.1.3902.1082.110.21.2.12.1.9	Counter64	read-only	Transmitted packets.
zxAnSrvPortHis1DayPerfTable	1.3.6.1.4.1.3902.1082.110.21.2.13		not-accessible	The historical 1 day interval performance data table of the service port.
zxAnSrvPortHis1DayPerfEntry	1.3.6.1.4.1.3902.1082.110.21.2.13.1		not-accessible	The historical 1 day interval performance data entry of the service port.
I32 zxAnSrvPortH1DIntervalNo	1.3.6.1.4.1.3902.1082.110.21.2.13.1.1	Integer32	not-accessible	Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional.
INT zxAnSrvPortH1DValidInterval	1.3.6.1.4.1.3902.1082.110.21.2.13.1.2	INTEGER	read-only	The validity of the data for this interval.
DAT zxAnSrvPortH1DDateTime	1.3.6.1.4.1.3902.1082.110.21.2.13.1.3	DateAndTime	read-only	The 1 day interval performance data generation time.
C64 zxAnSrvPortH1DInOctets	1.3.6.1.4.1.3902.1082.110.21.2.13.1.4	Counter64	read-only	Received octets.
C64 zxAnSrvPortH1DOutOctets	1.3.6.1.4.1.3902.1082.110.21.2.13.1.5	Counter64	read-only	Transmitted octets.
G32 zxAnSrvPortH1DInOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.13.1.6	Gauge32	read-only	Received octet rate.
G32 zxAnSrvPortH1DOutOctetRate	1.3.6.1.4.1.3902.1082.110.21.2.13.1.7	Gauge32	read-only	Transmitted octet rate.
C64 zxAnSrvPortH1DInPkts	1.3.6.1.4.1.3902.1082.110.21.2.13.1.8	Counter64	read-only	Received packets.
C64 zxAnSrvPortH1DOutPkts	1.3.6.1.4.1.3902.1082.110.21.2.13.1.9	Counter64	read-only	Transmitted packets.
zxAnSrvPortPerfConfTable	1.3.6.1.4.1.3902.1082.110.21.2.50		not-accessible	Enable/disable the service port performance.
zxAnSrvPortPerfConfEntry	1.3.6.1.4.1.3902.1082.110.21.2.50.1		not-accessible	A zxAnSrvPortPerfConfTable entry.
ROW zxAnSrvPortPerfConfRowStatus	1.3.6.1.4.1.3902.1082.110.21.2.50.1.100	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSrvPortPerfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).

RFC description

ZTE MIB for monitoring and managing service port performance metrics on access nodes in broadband networks.

Start monitoring ZTE ZXR10 carrier routers/switches (per-service-port inbound/outbound traffic-rate status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-SERVICE-PORT-PERF-MIB