ZXR10-ACL-MIB

Description: Manages ZTE ZXR10 router ACL rule configuration for IPv4 and IPv6 traffic filtering policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

This is a ZTE-specific MIB for the ZXR10 family of carrier and enterprise routers/switches, dedicated to Access Control List (ACL) configuration for both IPv4 and IPv6 traffic filtering. It exposes configuration-oriented data describing ACL rules, rule ordering, match criteria, and the interfaces or services to which they are applied, rather than raw traffic throughput counters. Its monitoring value lies in security and policy compliance verification: administrators can confirm which filtering rules are active on which interfaces and, where hit counters are present, observe how frequently specific rules match traffic, which helps detect unexpected permit/deny behavior or a misconfigured security policy. It typically works alongside interface and routing MIBs (IF-MIB, IP-MIB) since ACLs are applied per-interface and affect traffic otherwise reported by those standard MIBs. It is typically deployed by network engineers auditing and troubleshooting traffic-filtering security policies on ZXR10 routers in service provider or enterprise core/edge networks, often after loading the ZXR10-ACL-MIB MIB Browser file to inspect ACL rule objects directly.

An engineer polls the ACL rule table on a ZXR10 router to verify that a newly deployed rule blocking a specific source subnet is present and correctly ordered relative to existing rules. If traffic that should be blocked is still passing, checking rule hit counters (where available) against the configured match criteria helps identify whether the rule was applied to the wrong interface or direction. No sample objects were present in the source extract, so exact table/object names cannot be confirmed here.

Configures and manages IPv4/IPv6 access control lists on ZTE ZXR10 routers.