ZTE-AN-QOSACL-MIB

All MIBs › ZTE-AN-QOSACL-MIB

Organization: ZTE Corporation

Last Updated: 2020-11-08

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node QoS ACL rule sets for combined traffic classification and policy enforcement.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-QOSACL-MIB?

ZTE-AN-QOSACL-MIB is a vendor-specific SNMP module from ZTE Corporation for its Access Node (AN) family of broadband access platforms, covering combined Access Control List (ACL) filtering and Quality-of-Service (QoS) policy enforcement. It exposes configuration-style data describing ACL rule sets, traffic-classification criteria, and the QoS actions (rate limiting, priority marking, etc.) bound to matched flows on subscriber and uplink ports. Rather than exposing hardware health metrics, this MIB is used to monitor the software configuration and operational state of the ACL/QoS engine, letting an operator confirm that a given rule set is actually loaded and active on the device rather than merely configured. It presumably depends on other ZTE-AN MIBs (such as interface and VLAN modules) to identify the ports and VLANs to which ACL-QoS policies are attached. It is deployed on ZTE access nodes (DSLAM/OLT-class broadband aggregation equipment) in fixed-line access networks that need per-subscriber traffic policing and filtering. Engineers can download the ZTE-AN-QOSACL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-QOSACL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Access Node (DSLAM/OLT broadband access device)

Monitoring Examples

No object or table names were captured for this MIB in the source excerpt, so a specific polling walkthrough cannot be given honestly; in practice an operator would poll the ACL rule and QoS-action tables to verify a configured rule is bound to the correct port and actively rate-limiting or classifying traffic, flagging a fault if a rule is defined but shows as unapplied.

What Can Be Monitored

ACL rule configuration state
QoS classification criteria
traffic policy binding to ports
rule enable/disable status

Imported Objects

From HCNUM-TC

CounterBasedGauge64

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

From ZTE-AN-ACL-MIB

zxAnAclNumber

OBJECT-TYPE

From ZTE-AN-SMI

zxAnQos

OBJECT-IDENTITY

From ZTE-AN-TC-MIB

ZxAnSubIfIndex

How to Use in IPNetwork Monitor

Example using zxAnQosAclTrafficStatsPktsHc OID:

Select a ZTE Access Node (DSLAM/OLT broadband access device) (ACL rule-set/QoS-policy-binding config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnQosAclTrafficStatsPktsHc into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets. This object is a 64-bit version of zxAnQosAclTrafficStatsPkts. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnQosAclMib	1.3.6.1.4.1.3902.1082.50.5			This MIB defines managed objects of ACL-based Qos management.
zxAnQosAclGlobalObjects	1.3.6.1.4.1.3902.1082.50.5.1
BIT zxAnQosAclCapabilities	1.3.6.1.4.1.3902.1082.50.5.1.1	Bits	read-only	The QoS ACL capabilities for this equipment. The bit value 1 means the function represented by this bit is supported. priMarkTrafficClass(0): value 1 means supporting zxAnQosAclPriMarkTrafficClass. trafficLimitNotSupportColor(1): value 1 means not supporting priMarkNotSupportPrecedence(4): value 1 means not supporting zxAnQosAclPriMarkPrecedence. trafficMirrorSupportSubIf(9): value 1 means supporting zxAnQosAclTrafficMirrorSubIf. redirectSupportSubIf(10): value 1 means supporting zxAnQosAclRedirectSubIf.
zxAnQosAclObjects	1.3.6.1.4.1.3902.1082.50.5.2
zxAnQosAclActionObjects	1.3.6.1.4.1.3902.1082.50.5.2.2
zxAnQosAclTrafficLimitTable	1.3.6.1.4.1.3902.1082.50.5.2.2.2		not-accessible	This table is to provide traffic-limit configuration based on the ACL rule.
zxAnQosAclTrafficLimitEntry	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1		not-accessible	Acl traffic-limit entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, there are several cases. The mandatory and optional variables are different in each case. Case 1: to create an entry based on single rate three color marker algorithm: mandatory: zxAnQosAclTrafficLimitCir, zxAnQosAclTrafficLimitCbs, zxAnQosAclTrafficLimitEbs, zxAnQosAclTrafficLimitMode Case 2: to create an entry based on two rate three color marker algorithm: mandatory: zxAnQosAclTrafficLimitCir, zxAnQosAclTrafficLimitCbs, zxAnQosAclTrafficLimitPir, zxAnQosAclTrafficLimitPbs zxAnQosAclTrafficLimitMode, After an entry is created, no variable can be modified. If a manager tries to modify any variables in this entry, agent will return error with SNMP error code inconsistentValue.
I32 zxAnQosAclTrafficLimitRuleId	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.1	Integer32	not-accessible	The index of a rule.
INT zxAnQosAclTrafficLimitCir	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.2	INTEGER	read-create	Committed Information Rate(CIR) in kbps.
INT zxAnQosAclTrafficLimitPir	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.3	INTEGER	read-create	Peak Information Rate(PIR) in kbps. '0' indicates no configure.
INT zxAnQosAclTrafficLimitCbs	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.4	INTEGER	read-create	Committed Burst Rate(CBS) in kbyte.
INT zxAnQosAclTrafficLimitEbs	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.5	INTEGER	read-create	Excess Burst Size(EBS) in kbps. '0' indicates no configure.
INT zxAnQosAclTrafficLimitPbs	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.6	INTEGER	read-create	Peak Burst Size(PBS) in kbps.'0' indicates no configure.
INT zxAnQosAclTrafficLimitMode	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.7	INTEGER	read-create	Mode of color marking . blind(1) means color blind mode aware(2) means color aware mode
ROW zxAnQosAclTrafficRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosAclPriorityMarkTable	1.3.6.1.4.1.3902.1082.50.5.2.2.3		not-accessible	This table is to provide priority-mark configuration based on the ACL rule.
zxAnQosAclPriorityMarkEntry	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1		not-accessible	Acl priority-mark entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, a manager must follow a few rules: 1. One of these four variables(zxAnQosAclPriMarkDscp, zxAnQosAclPriMarkPrecedence, zxAnQosAclPriMarkCos, zxAnQosAclPriMarkTrafficClass) must be included in one SNMP set operation. 2. zxAnQosAclPriMarkDscp is mutually exclusive. Manager can't set these two variables at the same time. 4. zxAnQosAclPriMarkTrafficClass is mutually exclusive. Manager can't set these two variables at the same time. After an entry is created, no variable can be modified. If a manager tries to modify any variables in this entry, agent will return error with SNMP error code inconsistentValue.
I32 zxAnQosAclPriorityMarkRuleId	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.1	Integer32	not-accessible	The index of a rule.
INT zxAnQosAclPriMarkDscp	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.2	INTEGER	read-create	The DSCP value which will be marked to the traffic. '0xFF' indicates no configure .
INT zxAnQosAclPriMarkCos	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.3	INTEGER	read-create	The cos value which will be marked to the traffic. '0xFF' indicates no configure.
INT zxAnQosAclPriMarkPrecedence	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.4	INTEGER	read-create	The precedence value which will be marked to the traffic. '0xFF' indicates no configure.
I32 zxAnQosAclPriMarkTrafficClass	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.7	Integer32	read-create	The traffic class value which will be marked to the traffic. 65535 means unconfigured.
ROW zxAnQosAclPriMarkRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosAclVlanMarkTable	1.3.6.1.4.1.3902.1082.50.5.2.2.4		not-accessible	This table is to provide vlan-mark configuration based on the ACL rule.
zxAnQosAclVlanMarkEntry	1.3.6.1.4.1.3902.1082.50.5.2.2.4.1		not-accessible	Acl vlan-mark entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry of this table, all the variable are mandatory. After an entry is created, no variable can be modified. If a manager tries to modify any variables in this entry, agent will return error with SNMP error code inconsistentValue.
I32 zxAnQosAclVlanMarkRuleId	1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.1	Integer32	not-accessible	The index of a rule.
INT zxAnQosAclVlanMarkVid	1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.2	INTEGER	read-create	The vlan number which will be marked to the traffic.
ROW zxAnQosAclVlanMarkRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosAclRedirectTable	1.3.6.1.4.1.3902.1082.50.5.2.2.5		not-accessible	This table is to provide traffic-redirect configuration based on the ACL rule.
zxAnQosAclRedirectEntry	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1		not-accessible	Acl vlan-mark entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, there are several cases based on the variable zxAnQosAclRedirectType. The mandatory and optional variables are different in each case. Case 1: to create an entry when zxAnQosAclRedirectType is cpu(1): mandatory: none optional : none Case 2: to create an entry when zxAnQosAclRedirectType is interface(2): mandatory: zxAnQosAclRedirectIf optional : none After an entry is created, no variable can be modified. If a manager tries to modify any variables in this entry, agent will return error with SNMP error code inconsistentValue.
I32 zxAnQosAclRedirectRuleId	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.1	Integer32	not-accessible	The index of a rule.
INT zxAnQosAclRedirectType	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.2	INTEGER	read-create	The type of redirection. cpu(1) - traffic is redirected to CPU. interface(2) - traffic is redirected to interface. nextHop(3) - traffic is redirected to next hop.
I32 zxAnQosAclRedirectIf	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.3	Integer32	read-create	The Index of the interface which the traffic is redirected to.
IPt zxAnQosAclRedirectNextHopIpType	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.4	InetAddressType	read-create	The type of next hop IP address.
IP zxAnQosAclRedirectNextHopIp	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.5	InetAddress	read-create	The next hop IP address which the traffic is redirected to.
ZXA zxAnQosAclRedirectSubIf	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.6	ZxAnSubIfIndex	read-create	The sub-interface index of the interface which the traffic is redirected to.
ROW zxAnQosAclRedirectRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosAclTrafficMirrorTable	1.3.6.1.4.1.3902.1082.50.5.2.2.6		not-accessible	This table is to provide traffic-mirror configuration based on the ACL rule.
zxAnQosAclTrafficMirrorEntry	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1		not-accessible	Acl traffic-mirror entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, there are several cases based on the variable zxAnQosAclTrafficMirrorType. The mandatory and optional variables are different in each case. Case 1: to create an entry when zxAnQosAclTrafficMirrorType is cpu(1): mandatory: none optional : none Case 2: to create an entry when zxAnQosAclTrafficMirrorType is interface(2): mandatory: zxAnQosAclTrafficMirrorIf optional : none Case 3: to create an entry when zxAnQosAclTrafficMirrorType is rspan(3): mandatory: zxAnQosAclTrafficMirrorIf zxAnQosAclTrafficMirrorVid, optional : zxAnQosAclTrafficMirrorCos, zxAnQosAclTrafficMirrorTpid, Case 4: to create an entry when zxAnQosAclTrafficMirrorType is erspan(4): mandatory: zxAnQosAclTrafficMirrorDstIpType zxAnQosAclTrafficMirrorSrcIpAddr optional : zxAnQosAclTrafficMirrorCos zxAnQosAclTrafficMirrorTpid zxAnQosAclTrafficMirrorTtl zxAnQosAclTrafficMirrorDscp After an entry is created, no variable can be modified. If a manager tries to modify any variables in this entry, agent will return error with SNMP error code inconsistentValue.
I32 zxAnQosAclTrafficMirrorRuleId	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.1	Integer32	not-accessible	The index of a rule.
INT zxAnQosAclTrafficMirrorType	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.2	INTEGER	read-create	The type of traffic mirror. cpu(1) - traffic is mirrored to CPU. interface(2) - traffic is mirrored to interface. rspan(3) - traffic is mirrored to rspan. erspan(4) - traffic is mirrored to erspan.
I32 zxAnQosAclTrafficMirrorIf	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.3	Integer32	read-create	The Index of the interface which the traffic is mirrored to.
I32 zxAnQosAclTrafficMirrorVid	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.4	Integer32	read-create	The traffic VLAN ID of RSPAN or ERSPAN.
I32 zxAnQosAclTrafficMirrorCos	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.5	Integer32	read-create	The traffic CoS of RSPAN or ERSPAN.
I32 zxAnQosAclTrafficMirrorTpid	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.6	Integer32	read-create	The traffic TPID of RSPAN or ERSPAN.
ZXA zxAnQosAclTrafficMirrorSubIf	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.15	ZxAnSubIfIndex	read-create	The sub-interface index of the interface which the traffic is mirrored to.
ROW zxAnQosAclTrafficMirrorRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosAclTrafficStatsObjects	1.3.6.1.4.1.3902.1082.50.5.2.3
zxAnQosAclTrafficStatsTable	1.3.6.1.4.1.3902.1082.50.5.2.3.2		not-accessible	This table is to provide traffic-statistics configuration based on the ACL rule.
zxAnQosAclTrafficStatsEntry	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1		not-accessible	Acl traffic-statistics entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To reset the count, zxAnQosAclTrafficStatsReset is mandatory. When an entry is created, modify operation is not allowed.
I32 zxAnQosAclTrafficStatsRuleId	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.1	Integer32	not-accessible	The index of a rule.
C64 zxAnQosAclTrafficStatsPktsHcEx	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.6	Counter64	read-only	The number of packets. This object is a 64-bit version of zxAnQosAclTrafficStatsPkts.
C64 zxAnQosAclTrafficStatsOctetsHc	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.7	Counter64	read-only	The number of octets. This object is a 64-bit version of zxAnQosAclTrafficStatsOctets.
NUM zxAnQosAclTrafficStatsPktRate	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.8	CounterBasedGauge64	read-only	The rate of packets.
NUM zxAnQosAclTrafficStatsOctetRate	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.9	CounterBasedGauge64	read-only	The rate of octets.
INT zxAnQosAclTrafficStatsReset	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.45	INTEGER	read-create	Reset the traffic statistics counter. To get this object, the agent always returns resetCounter(1).
ROW zxAnQosAclTrafficStatsRowStatus	1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnTrafficBurstDetectObjects	1.3.6.1.4.1.3902.1082.50.5.2.4
zxAnQosAclNotifications	1.3.6.1.4.1.3902.1082.50.5.3
zxAnQosAclConformance	1.3.6.1.4.1.3902.1082.50.5.4
zxAnQosAclCompliances	1.3.6.1.4.1.3902.1082.50.5.4.1
zxAnQosAclCompliance	1.3.6.1.4.1.3902.1082.50.5.4.1.1			The compliance statement for the ZTE-AN-QOSACL-MIB.
zxAnQosAclGroups	1.3.6.1.4.1.3902.1082.50.5.4.2
zxAnQosAclTrafficLimitGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.1			A collection of objects providing the ACL-based traffic-limit configuration information.
zxAnQosAclPriorityMarkGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.2			A collection of objects providing the ACL-based priority-mark configuration information.
zxAnQosAclVlanMarkGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.3			A collection of objects providing the ACL-based vlan-mark configuration information.
zxAnQosAclRedirectGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.4			A collection of objects providing the ACL-based traffic-redirect configuration information.
zxAnQosAclTrafficMirrorGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.5			A collection of objects providing the ACL-based traffic-mirror configuration information.
zxAnQosAclTrafficStatsGroup	1.3.6.1.4.1.3902.1082.50.5.4.2.6			A collection of objects providing the ACL-based traffic-statistics configuration information.

RFC description

QoS ACL-based management for ZTE access network devices including traffic control, shaping, and statistics.

Start monitoring ZTE Access Node (DSLAM/OLT broadband access device) (ACL rule-set/QoS-policy-binding config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-QOSACL-MIB