ZXR10-SNMP-TRAPMAG-MIB

All MIBs › ZXR10-SNMP-TRAPMAG-MIB

Organization: ZTE Corporation

Last Updated: 2017-09-26

Category: ZTE ZXR10 System Management

Description: Covers SNMP trap manager settings on ZTE ZXR10 equipment, including trap destination, version, and notification filtering.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-SNMP-TRAPMAG-MIB?

This MIB is part of the ZTE ZXR10 platform and manages the device's own SNMP trap subsystem, controlling where notifications are sent, which SNMP version is used, and how traps are filtered before dispatch. It exposes configuration objects for trap destination addresses, community/user credentials, SNMP version selection, and enable/disable filters per trap type. Rather than reporting hardware or performance data itself, this MIB is meta-monitoring infrastructure: it governs whether and how other fault and status information (hardware alarms, protocol events, etc.) actually reaches a management station, so verifying its configuration is essential to ensuring monitoring reliability. It underpins delivery of notifications defined across many other ZXR10 MIBs, making it foundational to the whole alerting pipeline on the device. It is typically configured once during device provisioning in enterprise or carrier NOC environments to point trap delivery at the correct SNMP manager(s). Engineers can download the ZXR10-SNMP-TRAPMAG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SNMP-TRAPMAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch

Monitoring Examples

An administrator would poll the trap destination table to confirm the configured manager IP address, SNMP version, and community/security settings match the intended NMS, and check per-trap enable/disable flags to ensure critical alarms (e.g., hardware or link-down traps) are not filtered out. If a destination entry is missing or a filter unexpectedly suppresses a trap type, important faults elsewhere on the device would go unnoticed. Regularly auditing this table helps confirm that alarms generated by hardware or protocol MIBs are actually being delivered rather than silently dropped.

What Can Be Monitored

trap destination address
SNMP version used for traps
trap filter enable/disable status
notification credentials/community

Imported Objects

From INET-ADDRESS-MIB

InetAddressIPv4
InetAddressIPv6

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10RosngMIB	1.3.6.1.4.1.3902.3.6000
zxr10SnmpTrapMagMib	1.3.6.1.4.1.3902.3.6000.100			The MIB module to describe the information for SNMP trap.
zxr10SnmpTrapMag	1.3.6.1.4.1.3902.3.6000.100.1
INT zxr10SnmpEnableTrap	1.3.6.1.4.1.3902.3.6000.100.1.1	INTEGER	read-write	An integer description all of the zxr10SnmpEnableTrap.
INT zxr10SnmpEnableTrapBgp	1.3.6.1.4.1.3902.3.6000.100.1.2	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapBgp.
INT zxr10SnmpEnableTrapOspf	1.3.6.1.4.1.3902.3.6000.100.1.3	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapOspf.
INT zxr10SnmpEnableTrapRmon	1.3.6.1.4.1.3902.3.6000.100.1.4	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapRmon.
INT zxr10SnmpEnableTrapSnmp	1.3.6.1.4.1.3902.3.6000.100.1.5	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapSnmp.
INT zxr10SnmpEnableTrapStalarm	1.3.6.1.4.1.3902.3.6000.100.1.6	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapStalarm.
INT zxr10SnmpEnableTrapVpn	1.3.6.1.4.1.3902.3.6000.100.1.7	INTEGER	read-write	An integer description of the zxr10SnmpEnableTrapVpn.
zxr10SnmpTrapEnableTable	1.3.6.1.4.1.3902.3.6000.100.4		not-accessible	snmp Trap Enable entity configuration table
zxr10SnmpTrapEnableEntry	1.3.6.1.4.1.3902.3.6000.100.4.1		not-accessible	snmp Trap Enable entity configuration entry
INT zxr10SnmpTrapEnableType	1.3.6.1.4.1.3902.3.6000.100.4.1.1	INTEGER	not-accessible	trap type
ROW zxr10SnmpTrapEnableRowStatus	1.3.6.1.4.1.3902.3.6000.100.4.1.100	RowStatus	read-create	trap type RowStatus
zxr10SnmpTrapSvrTable	1.3.6.1.4.1.3902.3.6000.100.5		not-accessible	SNMP trap server entity configuration table
zxr10SnmpTrapSvrEntry	1.3.6.1.4.1.3902.3.6000.100.5.1		not-accessible	SNMP trap server entity configuration entry
STR zxr10TrapSvrVrfName	1.3.6.1.4.1.3902.3.6000.100.5.1.1	DisplayString	not-accessible	The VRF name.
ADR zxr10TrapSvrIpv4Address	1.3.6.1.4.1.3902.3.6000.100.5.1.2	InetAddressIPv4	not-accessible	The trap server IPv4 address. If the server address type is IPv6, the value of zxr10TrapSvrIpv4Address is '00000000'H .
ADR zxr10TrapSvrIpv6Address	1.3.6.1.4.1.3902.3.6000.100.5.1.3	InetAddressIPv6	not-accessible	The trap server IPv6 address. If the server address type is IPv4, the value of zxr10TrapSvrIpv6Address is '00000000000000000000000000000000'H .
STR zxr10TrapSvrCommunityOrUserName	1.3.6.1.4.1.3902.3.6000.100.5.1.4	DisplayString	not-accessible	If the zxr10TrapSvrVersion is v1/v2c, this value means community. If the zxr10TrapSvrVersion is v3, this value means user name.
INT zxr10TrapSvrFormat	1.3.6.1.4.1.3902.3.6000.100.5.1.5	INTEGER	not-accessible	Trap format. snmpTrap - trap is sent to server and no confirm is needed snmpInform - need the confirm from a server.
INT zxr10TrapSvrVersion	1.3.6.1.4.1.3902.3.6000.100.5.1.6	INTEGER	read-create	The SNMP version.
INT zxr10TrapSvrSecurityLevel	1.3.6.1.4.1.3902.3.6000.100.5.1.7	INTEGER	read-create	SNMPv3 security level. noAuthNoPriv - without authentication and without privacy, authNoPriv - with authentication but without privacy, authPriv - with authentication and with privacy.
I32 zxr10TrapSvrUdpPort	1.3.6.1.4.1.3902.3.6000.100.5.1.8	Integer32	read-create	The received port number of the trap server.
ROW zxr10TrapSvrRowStatus	1.3.6.1.4.1.3902.3.6000.100.5.1.100	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxr10SnmpTrapSvrEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).

RFC description

Manages ZTE ZXR10 SNMP trap manager settings including trap destination, version, and notification filtering.

Start monitoring ZTE ZXR10 routers/switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-SNMP-TRAPMAG-MIB

What Is ZXR10-SNMP-TRAPMAG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description