ZXR10-VRRP-EXT-MIB

All MIBs › ZXR10-VRRP-EXT-MIB

Organization: ZTE Corporation.

Last Updated: 2015-02-06

Category: ZTE ZXR10 High Availability

Description: Manages ZTE ZXR10 VRRP extended objects including virtual router priority, preemption, and failover tracking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-VRRP-EXT-MIB?

This MIB is a ZTE ZXR10 extension supplementing the standard VRRP-MIB (RFC 2787) and covers Virtual Router Redundancy Protocol operation, which allows a group of routers to present a shared virtual IP as a highly available default gateway. It exposes extended operational objects per VRRP instance, including priority, preemption mode and delay, advertisement interval, protocol version, and interface-tracking policy used to adjust priority based on link state. This MIB is used to monitor the software/protocol health of gateway redundancy: confirming which router currently holds the master role, whether priority and preemption settings are as expected, and whether tracked interfaces are influencing failover behavior, all of which are critical to detecting an unexpected or delayed failover. As its name indicates, it explicitly depends on and extends the standard VRRP-MIB (RFC 2787), so full VRRP state is only visible when both MIBs are polled together. It is typically deployed in enterprise and data-center edge routers configured in VRRP pairs or groups to provide gateway redundancy. Engineers can download the ZXR10-VRRP-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-VRRP-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router (VRRP gateway pair)

Monitoring Examples

An operator would poll zxr10VrrpExtOperTable / zxr10VrrpExtOperEntry, keyed by zxr10VrrpOperIfIndex and zxr10VrrpOperVrId, to check zxr10VrrpOperCfgPriority, zxr10VrrpOperPreemptMode, and zxr10VrrpOperPreemptDelay for a given virtual router. If zxr10VrrpOperPreemptMode is unexpectedly disabled after a primary router recovers from a failure, the backup router may continue acting as master longer than intended, delaying restoration of the preferred path. Monitoring zxr10VrrpTrackInterPolicy alongside interface status also reveals whether a tracked interface failure is correctly lowering priority and triggering the expected failover.

What Can Be Monitored

VRRP instance priority
preemption mode/delay
advertisement interval
interface tracking policy
VRRP protocol version

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using vrrpTrackInterState OID:

Select a ZTE ZXR10 router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vrrpTrackInterState into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current state of the tracked interface. This object has two defined values: - `up', which indicates the protocol status of the tracked interface. - `down', which indicates the protocol status of the tracked interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'up', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ROW cfgOperRowStatus	1.3.6.1.4.1.3902.3.108.2.2.1.1	RowStatus	read-only	The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of a member group for a virtual router manage group. Destroying the entry or setting it to notInService(2) removes the member group from the virtual router manage group. The use of other values is implementation-dependent.
ROW mCfgOperRowStatus	1.3.6.1.4.1.3902.3.108.2.1.1.1	RowStatus	read-only	The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the manage info from the virtual router. The use of other values is implementation-dependent.
I32 memberIfIndex	1.3.6.1.4.1.3902.3.108.2.2.1.2	Integer32	not-accessible	The member interface index of virtual router manage group.
I32 memberVRID	1.3.6.1.4.1.3902.3.108.2.2.1.3	Integer32	not-accessible	The member vrid of virtual router manage group
I32 mVrrpCfgIfIndex	1.3.6.1.4.1.3902.3.108.2.1.1.2	Integer32	not-accessible	The interface index of manage VRRP groups.
I32 mVrrpCfgVRID	1.3.6.1.4.1.3902.3.108.2.1.1.3	Integer32	not-accessible	The vrid of the manage VRRP groups.
I32 mVrrpIfIndex	1.3.6.1.4.1.3902.3.108.2.2.1.4	Integer32	not-accessible	The interface index of the virtual router manage group.
I32 mVrrpVRID	1.3.6.1.4.1.3902.3.108.2.2.1.5	Integer32	not-accessible	The vrid of the virtual router manage group.
STR vrrpDetectType	1.3.6.1.4.1.3902.3.108.1.2.1.2	DisplayString	read-only	The type of VRRP track detect for a virtual router.
vrrpExtConformance	1.3.6.1.4.1.3902.3.108.3
vrrpExtendTrackGroup	1.3.6.1.4.1.3902.3.108.3.2.2			Conformance group for VRRP tracking operations.
vrrpExtendTrackInterGroup	1.3.6.1.4.1.3902.3.108.3.2.1			Conformance group for VRRP track interface operations.
vrrpExtMIB	1.3.6.1.4.1.3902.3.108			This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers. This MIB Module is a supplement to the VRRP-MIB [RFC2787].
vrrpExtMIBCompliance	1.3.6.1.4.1.3902.3.108.3.1.1			The core compliance statement for all VRRP implementations.
vrrpExtMIBCompliances	1.3.6.1.4.1.3902.3.108.3.1
vrrpExtMIBGroups	1.3.6.1.4.1.3902.3.108.3.2
vrrpGroupManages	1.3.6.1.4.1.3902.3.108.2
vrrpManageCfgEntry	1.3.6.1.4.1.3902.3.108.2.1.1		not-accessible	An entry in the table, containing manage information about a given virtual router.
vrrpManageCfgGroup	1.3.6.1.4.1.3902.3.108.3.2.3			Conformance group for VRRP manage operations.
vrrpManageCfgTable	1.3.6.1.4.1.3902.3.108.2.1		not-accessible	Table of virtual router manage.
vrrpMemberCfgEntry	1.3.6.1.4.1.3902.3.108.2.2.1		not-accessible	An entry in the table, containing member information about a given virtual router manage group.
vrrpMemberCfgGroup	1.3.6.1.4.1.3902.3.108.3.2.4			Conformance group for VRRP member operations.
vrrpMemberCfgTable	1.3.6.1.4.1.3902.3.108.2.2		not-accessible	The member table of the VRRP manage group.
INT vrrpPolicyType	1.3.6.1.4.1.3902.3.108.1.2.1.3	INTEGER	read-only	The type of VRRP track policy for a virtual router.
vrrpTrackEntry	1.3.6.1.4.1.3902.3.108.1.2.1		not-accessible	An entry in the table contains an VRRP track that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of VRRP track associated by the virtual router. Rows in the table cannot be modified.
vrrpTrackInterEntry	1.3.6.1.4.1.3902.3.108.1.1.1		not-accessible	An entry in the vrrpTrackInterTable containing the tracking characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified.
I32 vrrpTrackInterIfIdx	1.3.6.1.4.1.3902.3.108.1.1.1.6	Integer32	not-accessible	The index of the tracked interface.
ROW vrrpTrackInterOperRowStatus	1.3.6.1.4.1.3902.3.108.1.1.1.3	RowStatus	read-only	The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the VrrpTrackInterTable is constrained by the tracking state of the corresponding virtual router. When `VrrpTrackInterOperRowStatus' is set to active(1), no other objects in the conceptual row. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `VrrpTrackInterOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `VrrpTrackInterVrid' has been set and there is at least one active row in the `VrrpTrackInterTable' tracking a interface for the virtual router.
I32 vrrpTrackInterPriReduce	1.3.6.1.4.1.3902.3.108.1.1.1.2	Integer32	read-only	This object specifies the priority to be reduced when the tracked interface is down. A priority of '0', indicates not set the reduced priority.
I32 vrrpTrackInterStandByIfIdx	1.3.6.1.4.1.3902.3.108.1.1.1.4	Integer32	not-accessible	The interface index of VRRP groups.
INT vrrpTrackInterStateEx	1.3.6.1.4.1.3902.3.108.1.1.1.1	INTEGER	read-only	The current state of the tracked interface. This object has two defined values: - `up', which indicates the protocol status of the tracked interface. - `down', which indicates the protocol status of the tracked interface.
vrrpTrackInterTable	1.3.6.1.4.1.3902.3.108.1.1		not-accessible	Tracking interface table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'VrrpTrackInterEntry' items.
VRI vrrpTrackInterVrid	1.3.6.1.4.1.3902.3.108.1.1.1.5	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID) of the tracked interface.
vrrpTrackManages	1.3.6.1.4.1.3902.3.108.1
STR vrrpTrackName	1.3.6.1.4.1.3902.3.108.1.2.1.7	DisplayString	not-accessible	The name of VRRP track for a virtual router.
ROW vrrpTrackOperRowStatus	1.3.6.1.4.1.3902.3.108.1.2.1.6	RowStatus	read-only	The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpTrackTable is constrained by the tracking state of the corresponding virtual router. When `vrrpTrackOperRowStatus' is set to active(1), no other objects in the conceptual row. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpTrackOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `VrrpTrackName' has been set and there is at least one active row in the `VrrpTrackTable'.
I32 vrrpTrackPriReduce	1.3.6.1.4.1.3902.3.108.1.2.1.4	Integer32	read-only	The assigned reduced priority when VRRP track down for a virtual router.
I32 vrrpTrackStandByIfIdx	1.3.6.1.4.1.3902.3.108.1.2.1.9	Integer32	not-accessible	The interface index of VRRP groups.
INT vrrpTrackState	1.3.6.1.4.1.3902.3.108.1.2.1.5	INTEGER	read-only	The VRRP track state for a virtual router.
vrrpTrackTable	1.3.6.1.4.1.3902.3.108.1.2		not-accessible	The table of VRRP track associated with this virtual router.
INT vrrpTrackType	1.3.6.1.4.1.3902.3.108.1.2.1.1	INTEGER	read-only	The type of tracking for a virtual router.
VRI vrrpTrackVrid	1.3.6.1.4.1.3902.3.108.1.2.1.8	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID) of the VRRP track.
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10VrrpExtOperEntry	1.3.6.1.4.1.3902.3.108.4.1.1		not-accessible	An entry in the zxr10VrrpExtOperTable containing the private operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID.
zxr10VrrpExtOperObjects	1.3.6.1.4.1.3902.3.108.4
zxr10VrrpExtOperTable	1.3.6.1.4.1.3902.3.108.4.1		not-accessible	Extend operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'zxr10VrrpExtOperEntry' items.
T/F zxr10VrrpOperAcceptMode	1.3.6.1.4.1.3902.3.108.4.1.1.9	TruthValue	read-only	Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPvX address as its own if it is not the IPvX address owner.
T/F zxr10VrrpOperBackupRouteMode	1.3.6.1.4.1.3902.3.108.4.1.1.10	TruthValue	read-only	Controls whether a virtual router in Backup state will forward packets addressed to virtual mac address.
I32 zxr10VrrpOperCfgPriority	1.3.6.1.4.1.3902.3.108.4.1.1.8	Integer32	read-only	The actual configured priority which was used for the virtual router master election process. Higher values imply higher priority.
T/F zxr10VrrpOperCheckTtlMode	1.3.6.1.4.1.3902.3.108.4.1.1.11	TruthValue	read-only	Controls whether a virtual router verify that the IPv4 TTL or the IPv6 hop limit to 255.
I32 zxr10VrrpOperIfIndex	1.3.6.1.4.1.3902.3.108.4.1.1.1	Integer32	not-accessible	This object contains the interface index of VRRP group.
I32 zxr10VrrpOperMasterAdverInterval	1.3.6.1.4.1.3902.3.108.4.1.1.22	Integer32	read-only	The time interval of Master sending advertisements.
I32 zxr10VrrpOperMasterDownInterval	1.3.6.1.4.1.3902.3.108.4.1.1.23	Integer32	read-only	Time interval for Backup to declare Master down.
IP zxr10VrrpOperMasterIpAddr	1.3.6.1.4.1.3902.3.108.4.1.1.20	InetAddress	read-only	The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
IPt zxr10VrrpOperMasterIpAddrType	1.3.6.1.4.1.3902.3.108.4.1.1.19	InetAddressType	read-only	The IP address type of zxr10VrrpOperMasterIpAddr. ipv4(1) and ipv6(2) are the only two values supported in this MIB module.
I32 zxr10VrrpOperMasterRunPriority	1.3.6.1.4.1.3902.3.108.4.1.1.21	Integer32	read-only	The actual running priority of the virtual router in Master state.
OCT zxr10VrrpOperOutInterface1	1.3.6.1.4.1.3902.3.108.4.1.1.12	OCTET STRING	read-only	The first interface of the virtual router sent the vrrp packets.
OCT zxr10VrrpOperOutInterface2	1.3.6.1.4.1.3902.3.108.4.1.1.13	OCTET STRING	read-only	The second interface of the virtual router sent the vrrp packets.
OCT zxr10VrrpOperOutInterface3	1.3.6.1.4.1.3902.3.108.4.1.1.14	OCTET STRING	read-only	The third interface of the virtual router sent the vrrp packets.
INT zxr10VrrpOperPktSendMode	1.3.6.1.4.1.3902.3.108.4.1.1.16	INTEGER	read-only	The send mode that a virtual router in Master state sends VRRP advertisement packets from out-interface. - `all', which indicates that the virtual will send advertisement packets from all out-interfaces each time. - `rotation', which indicates that the virtual will send advertisement packets from all out-interfaces in rotation.
I32 zxr10VrrpOperPreemptDelay	1.3.6.1.4.1.3902.3.108.4.1.1.5	Integer32	read-only	The current set preempt delay time of the virtual router.
T/F zxr10VrrpOperPreemptMode	1.3.6.1.4.1.3902.3.108.4.1.1.4	TruthValue	read-only	The current preempt state of the virtual router. This object has two defined values: - `true', which indicates that the virtual router is set the preempt mode. - `false', which indicates the virtual router is not set the preempt mode.
IP zxr10VrrpOperPrimaryVIPAddr	1.3.6.1.4.1.3902.3.108.4.1.1.27	InetAddress	read-only	The VRRP primary virtual IP address.
IPt zxr10VrrpOperPrimaryVIPType	1.3.6.1.4.1.3902.3.108.4.1.1.26	InetAddressType	read-only	The IP address type of zxr10VrrpOperPrimaryVIPAddr. ipv4(1) and ipv6(2) are the only two values supported in this MIB module.
I32 zxr10VrrpOperPrivateAdvInterval	1.3.6.1.4.1.3902.3.108.4.1.1.6	Integer32	read-only	The time interval, in milliseconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
I32 zxr10VrrpOperReloadDelay	1.3.6.1.4.1.3902.3.108.4.1.1.15	Integer32	read-only	The time that an instance of the state machine for virtual router delays to run when the interface starts up, in seconds.
I32 zxr10VrrpOperRunPriority	1.3.6.1.4.1.3902.3.108.4.1.1.25	Integer32	read-only	The actual running priority of the virtual router.
INT zxr10VrrpOperState	1.3.6.1.4.1.3902.3.108.4.1.1.24	INTEGER	read-only	The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router.
I32 zxr10VrrpOperStateChangeNum	1.3.6.1.4.1.3902.3.108.4.1.1.17	Integer32	read-only	The numbers of the virtual router changing state.
TIM zxr10VrrpOperStateLastChangeTime	1.3.6.1.4.1.3902.3.108.4.1.1.18	TimeStamp	read-only	The time that the state of a virtual router changed last time.
T/F zxr10VrrpOperTimerLearnMode	1.3.6.1.4.1.3902.3.108.4.1.1.3	TruthValue	read-only	The current learn mode state of the virtual router. This object has two defined values: - `true', which indicates that the virtual router is set the learn mode. - `false', which indicates the virtual router is not set the learn mode.
INT zxr10VrrpOperVersion	1.3.6.1.4.1.3902.3.108.4.1.1.7	INTEGER	read-only	The version of VRRP protocol.
VRI zxr10VrrpOperVrId	1.3.6.1.4.1.3902.3.108.4.1.1.2	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID).
INT zxr10VrrpTrackInterPolicy	1.3.6.1.4.1.3902.3.108.1.1.1.7	INTEGER	read-only	The policy of tracking interface.
zxr10VrrpVFCfgEntry	1.3.6.1.4.1.3902.3.108.5.1.1		not-accessible	An entry in the zxr10VrrpVFCfgTable containing the private informative characteristics of a virtual forwarder. On a VRRP router, a given virtual router is identified by a combination of the IF name, VRID.
I32 zxr10VrrpVFCfgFwdDelay	1.3.6.1.4.1.3902.3.108.5.1.1.12	Integer32	read-only	The forwarding delay time of virtual forwarder.
I32 zxr10VrrpVFCfgFwdWeight	1.3.6.1.4.1.3902.3.108.5.1.1.4	Integer32	read-only	The actual configured forward weight which was used for the virtual forwarder election process. Higher values imply higher weight.
I32 zxr10VrrpVFCfgIfIndex	1.3.6.1.4.1.3902.3.108.5.1.1.13	Integer32	read-only	This object contains the interface index of VRRP groups.
STR zxr10VrrpVFCfgIfName	1.3.6.1.4.1.3902.3.108.5.1.1.1	DisplayString	not-accessible	This object contains the interface name of VRRP groups.
I32 zxr10VrrpVFCfgLowWeight	1.3.6.1.4.1.3902.3.108.5.1.1.5	Integer32	read-only	This object specifies the invalid weight to be used for the virtual forwarder becomes unavailable. Higher values imply higher invalid weight.
zxr10VrrpVFCfgObjects	1.3.6.1.4.1.3902.3.108.5
I32 zxr10VrrpVFCfgOwnerID	1.3.6.1.4.1.3902.3.108.5.1.1.3	Integer32	read-only	This object contains the Virtual Forwarder Identifier (VFID).
INT zxr10VrrpVFCfgPolicy	1.3.6.1.4.1.3902.3.108.5.1.1.11	INTEGER	read-only	The current balance policy of the virtual router. This object has three defined values: - 'roundRobin', which indicates that the virtual router is set round robin policy. - 'weighted', which indicates the virtual router is set weighted policy. - 'hostDependent', which indicates the virtual router is set host dependent policy.
I32 zxr10VrrpVFCfgPreemptDelay	1.3.6.1.4.1.3902.3.108.5.1.1.7	Integer32	read-only	The current set preempt delay time of the virtual forwarder.
T/F zxr10VrrpVFCfgPreemptEnable	1.3.6.1.4.1.3902.3.108.5.1.1.6	TruthValue	read-only	The current preempt state of the virtual forwarder. This object has two defined values: - 'true', which indicates that the virtual forwarder is set the preempt mode. - 'false', which indicates the virtual forwarder is not set the preempt mode.
I32 zxr10VrrpVFCfgRedirectTime	1.3.6.1.4.1.3902.3.108.5.1.1.8	Integer32	read-only	The redirect time of virtual forwarder which is in TakeOver state.
INT zxr10VrrpVFCfgRunMode	1.3.6.1.4.1.3902.3.108.5.1.1.10	INTEGER	read-only	The current running mode of the virtual router. This object has two defined values: - 'standard', which indicates that the virtual router is working on the standard mode. - 'balance', which indicates the virtual router is working on the balance mode.
zxr10VrrpVFCfgTable	1.3.6.1.4.1.3902.3.108.5.1		not-accessible	Operation table for a VRRP virtual forwarder which consists of a sequence (i.e., one or more conceptual rows) of 'zxr10VrrpVFCfgEntry' items.
I32 zxr10VrrpVFCfgTimeOut	1.3.6.1.4.1.3902.3.108.5.1.1.9	Integer32	read-only	The aging time of virtual forwarder which is in TakeOver state.
VRI zxr10VrrpVFCfgVrId	1.3.6.1.4.1.3902.3.108.5.1.1.2	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID).
STR zxr10VrrpVFDetectType	1.3.6.1.4.1.3902.3.108.7.2.1.5	DisplayString	read-only	The type of tracking detect for a virtual forwarder.
zxr10VrrpVFOperEntry	1.3.6.1.4.1.3902.3.108.6.1.1		not-accessible	An entry in the zxr10VrrpVFOperTable containing the private informative characteristics of a virtual forwarder. On a VRRP router, a given virtual forwarder is identified by a combination of the IF name, VRID and VFID.
I32 zxr10VrrpVFOperIfIndex	1.3.6.1.4.1.3902.3.108.6.1.1.12	Integer32	read-only	This object contains the interface index of VRRP groups.
STR zxr10VrrpVFOperIfName	1.3.6.1.4.1.3902.3.108.6.1.1.1	DisplayString	not-accessible	This object contains the interface name of VRRP groups.
IP zxr10VrrpVFOperIpAddr	1.3.6.1.4.1.3902.3.108.6.1.1.9	InetAddress	read-only	The virtual forwarder's real IP address of interface.
IPt zxr10VrrpVFOperIpAddrType	1.3.6.1.4.1.3902.3.108.6.1.1.8	InetAddressType	read-only	The IP address type of zxr10VrrpVFOperIpAddr. ipv4(1) and ipv6(2) are the only two values supported in this MIB module.
INT zxr10VrrpVFOperLocation	1.3.6.1.4.1.3902.3.108.6.1.1.10	INTEGER	read-only	The current location of the virtual forwarder. This object has three defined values: - 'local', which indicates that the virtual forwarder is configured locally. - 'remote', which indicates that the virtual router is remote. - 'none', which indicates that the virtual forwarder is not configured or does not exist.
zxr10VrrpVFOperObjects	1.3.6.1.4.1.3902.3.108.6
I32 zxr10VrrpVFOperRunPriority	1.3.6.1.4.1.3902.3.108.6.1.1.7	Integer32	read-only	This object specifies the priority to be used for the virtual forwarder election process. Higher values imply higher priority.
I32 zxr10VrrpVFOperRunWeight	1.3.6.1.4.1.3902.3.108.6.1.1.4	Integer32	read-only	This object specifies the weight to be used for identifying the ability of forwarding for virtual forwarder. Higher values imply higher weight.
zxr10VrrpVFOperTable	1.3.6.1.4.1.3902.3.108.6.1		not-accessible	Operation table for a VRRP virtual forwarder which consists of a sequence (i.e., one or more conceptual rows) of 'zxr10VrrpVFOperEntry' items.
I32 zxr10VrrpVFOperVFID	1.3.6.1.4.1.3902.3.108.6.1.1.3	Integer32	not-accessible	This object contains the Virtual Forwarder Identifier (VFID).
MAC zxr10VrrpVFOperVFMac	1.3.6.1.4.1.3902.3.108.6.1.1.6	MacAddress	read-only	The virtual MAC address of the virtual forwarder.
I32 zxr10VrrpVFOperVFNum	1.3.6.1.4.1.3902.3.108.6.1.1.11	Integer32	read-only	This object contains the total number of virtual forwarder in one VRRP group.
INT zxr10VrrpVFOperVFState	1.3.6.1.4.1.3902.3.108.6.1.1.5	INTEGER	read-only	The current state of the virtual forwarder. This object has four defined values: - 'initialize', which indicates that the virtual forwarder is waiting for a startup event. - 'active', which indicates that the virtual router is forwarder owner and is responsible for forwarding flow. - 'takeover', which indicates that the virtual forwarder is forwarding flow for taking the place of active forwarder. - 'listening', which indicates that the virtual forwarder is monitoring the availability of the active forwarder.
VRI zxr10VrrpVFOperVrId	1.3.6.1.4.1.3902.3.108.6.1.1.2	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID).
INT zxr10VrrpVFPolicyType	1.3.6.1.4.1.3902.3.108.7.2.1.6	INTEGER	read-only	The type of tracking policy for a virtual forwarder.
zxr10VrrpVFTrackDetectEntry	1.3.6.1.4.1.3902.3.108.7.2.1		not-accessible	An entry in the table contains a tracking detect that is associated with a virtual forwarder. The number of rows for a given ifName and VrId will equal the number of tracking detect associated by the virtual forwarder. Rows in the table cannot be modified.
zxr10VrrpVFTrackDetectTable	1.3.6.1.4.1.3902.3.108.7.2		not-accessible	The table of tracking detect associated with the VRRP virtual forwarder.
zxr10VrrpVFTrackIfEntry	1.3.6.1.4.1.3902.3.108.7.1.1		not-accessible	An entry in the zxr10VrrpVFTrackIfTable containing the tracking characteristics of a VRRP virtual forwarder. On a VRRP router, a given virtual router is identified by a combination of the IF name and VRID. Rows in the table cannot be modified.
I32 zxr10VrrpVFTrackIfIdx	1.3.6.1.4.1.3902.3.108.7.1.1.8	Integer32	read-only	The index of the tracked interface.
STR zxr10VrrpVFTrackIfName	1.3.6.1.4.1.3902.3.108.7.1.1.3	DisplayString	not-accessible	The name of the tracked interface.
INT zxr10VrrpVFTrackIfPolicy	1.3.6.1.4.1.3902.3.108.7.1.1.6	INTEGER	read-only	The policy of tracking interface.
I32 zxr10VrrpVFTrackIfPriReduce	1.3.6.1.4.1.3902.3.108.7.1.1.5	Integer32	read-only	This object specifies the priority to be reduced when the tracked interface is down.
I32 zxr10VrrpVFTrackIfStandByIfIdx	1.3.6.1.4.1.3902.3.108.7.1.1.7	Integer32	read-only	The interface index of VRRP groups.
STR zxr10VrrpVFTrackIfStandByIfName	1.3.6.1.4.1.3902.3.108.7.1.1.1	DisplayString	not-accessible	The interface name of VRRP groups.
INT zxr10VrrpVFTrackIfState	1.3.6.1.4.1.3902.3.108.7.1.1.4	INTEGER	read-only	The current state of the tracked interface. This object has two defined values: - `up', which indicates the protocol status of the tracked interface. - `down', which indicates the protocol status of the tracked interface.
zxr10VrrpVFTrackIfTable	1.3.6.1.4.1.3902.3.108.7.1		not-accessible	Tracking interface table for a VRRP virtual forwarder which consists of a sequence (i.e., one or more conceptual rows) of 'zxr10VrrpVFTrackIfEntry' items.
VRI zxr10VrrpVFTrackIfVrid	1.3.6.1.4.1.3902.3.108.7.1.1.2	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID) of the tracked interface.
zxr10VrrpVFTrackManages	1.3.6.1.4.1.3902.3.108.7
STR zxr10VrrpVFTrackName	1.3.6.1.4.1.3902.3.108.7.2.1.3	DisplayString	not-accessible	The name of tracking detect for a virtual forwarder.
I32 zxr10VrrpVFTrackPriReduce	1.3.6.1.4.1.3902.3.108.7.2.1.7	Integer32	read-only	The assigned reduced priority when tracking detect down for a virtual forwarder.
I32 zxr10VrrpVFTrackStandByIfIdx	1.3.6.1.4.1.3902.3.108.7.2.1.9	Integer32	read-only	The interface index of VRRP groups.
STR zxr10VrrpVFTrackStandByIfName	1.3.6.1.4.1.3902.3.108.7.2.1.1	DisplayString	not-accessible	The interface name of VRRP groups.
INT zxr10VrrpVFTrackState	1.3.6.1.4.1.3902.3.108.7.2.1.8	INTEGER	read-only	The tracking detect state for a virtual forwarder.
INT zxr10VrrpVFTrackType	1.3.6.1.4.1.3902.3.108.7.2.1.4	INTEGER	read-only	The type of tracking detect for a virtual forwarder.
VRI zxr10VrrpVFTrackVrid	1.3.6.1.4.1.3902.3.108.7.2.1.2	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID) of the virtual forwarder tracking detect.

RFC description

Virtual Router Redundancy Protocol (VRRP) extensions for ZTE ZXR10 routers, managing router failover and redundancy.

Start monitoring ZTE ZXR10 routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-VRRP-EXT-MIB