| OID symbolic | OID numeric | Type | Access | Description |
|---|
| zte | 1.3.6.1.4.1.3902 | | | |
| zxr10 | 1.3.6.1.4.1.3902.3 | | | |
| zxr10RosngMIB | 1.3.6.1.4.1.3902.3.6000 | | | |
| zxr10CLIMIB | 1.3.6.1.4.1.3902.3.6000.52 | | | |
| zxr10CLIGlobalObjects | 1.3.6.1.4.1.3902.3.6000.52.1 | | | |
| INT zxr10CLIMultiUserConfig | 1.3.6.1.4.1.3902.3.6000.52.1.1 | INTEGER | read-only | True indicates multiple CLI users are permitted to enter
configuration mode. False indicates they are prohibited. |
| zxr10CLIConfigSaveGlobalObjects | 1.3.6.1.4.1.3902.3.6000.52.1.2 | | | |
| CLI zxr10CLIConfigSaveStatus | 1.3.6.1.4.1.3902.3.6000.52.1.2.1 | CLISaveConfigStatus | read-write | The node is used to save configuration, and is used as
the status of a saving configuration operation.
After saving configuration finished for five minutes,
status data will be idle. |
| DAT zxr10CLIConfigSaveStartTime | 1.3.6.1.4.1.3902.3.6000.52.1.2.2 | DateAndTime | read-only | The starting time of saving configuration.
After saving configuration operation finished for five minutes,
starting time will be empty string. |
| DAT zxr10CLIConfigSaveEndTime | 1.3.6.1.4.1.3902.3.6000.52.1.2.3 | DateAndTime | read-only | The ending time of saving configuration.
After saving configuration finished for five minutes,
ending time will be empty string. |
| CLI zxr10CLIConfigSaveFailedReason | 1.3.6.1.4.1.3902.3.6000.52.1.2.4 | CLISaveConfigFailedReason | read-only | The saving configuration operation failed reason.
After saving configuration finished for five minutes,
the reason will be noError. |
| I32 zxr10CLIConfigSaveProgress | 1.3.6.1.4.1.3902.3.6000.52.1.2.5 | Integer32 | read-only | The progress of the saving configuration operation.
After saving configuration finished for five minutes,
the progress will be zero. |
| zxr10CLIAutoSaveGlobalObjects | 1.3.6.1.4.1.3902.3.6000.52.1.3 | | | |
| I32 zxr10CLIAutoSaveDelayInterval | 1.3.6.1.4.1.3902.3.6000.52.1.3.1 | Integer32 | read-write | The delay interval of automatic saving
configuration when configuration data is changed.
Another strategy is to save regularly every day.
These two strategies are mutually exclusive.
0 indicates that the policy is closed. |
| I32 zxr10CLIAutoSaveEverydayTime | 1.3.6.1.4.1.3902.3.6000.52.1.3.2 | Integer32 | read-write | The time of automatic saving configuration time everyday.
To convert a time HH:MM:SS into a value in units of
seconds, the following algorithm should be used:
value = HH * 3600 + MM * 60 + SS
Another strategy is to save when configuration data is changed.
These two strategies are mutually exclusive.
86400 indicates that the policy is closed. |
| I32 zxr10CLIAutoSaveCpuLimit | 1.3.6.1.4.1.3902.3.6000.52.1.3.3 | Integer32 | read-write | The CPU usage threshold of automatic saving configuration.
Configuration will be saved immediately when CPU utilization
not reach the threshold. Configuration will be not saved when the
threshold is exceeded.
After the interval, Check CPU utilization again.
0 indicates that it is not restricted by CPU utilization. |
| I32 zxr10CLIAutoSaveCpuLimitInterval | 1.3.6.1.4.1.3902.3.6000.52.1.3.4 | Integer32 | read-write | The time interval of automatic saving configuration
when CPU utilization reaches to upper limit.
If the interval is not configured, configuration is not saved
when exceeds CPU utilization.
0 indicates that the interval does not take effect. |
| zxr10StartrunGlobalObjects | 1.3.6.1.4.1.3902.3.6000.52.1.4 | | | |
| STR zxr10DownloadVrfName | 1.3.6.1.4.1.3902.3.6000.52.1.4.1 | DisplayString | read-write | VPN routing/forwarding instance (VRF). This node and zxr10DownloadDcn cannot
be configured at the same time |
| T/F zxr10DownloadDcn | 1.3.6.1.4.1.3902.3.6000.52.1.4.2 | TruthValue | read-write | A special VRF name. This node and zxr10DownloadVrfName cannot
be configured at the same time |
| INT zxr10DownloadType | 1.3.6.1.4.1.3902.3.6000.52.1.4.3 | INTEGER | read-write | The mode to download files. Three modes: local, FTP or SFTP.
Users can choose one mode to download file one time. |
| IP zxr10DownloadServerIPv4Addr | 1.3.6.1.4.1.3902.3.6000.52.1.4.4 | IpAddress | read-write | The IPv4 address of the FTP/STFP server from
which to copy the configuration file. This object
can not be used with zxr10DownloadServerIPv6Addr at the
same time. Values of 0.0.0.0 or FF.FF.FF.FF for
copyServerAddress are not allowed. |
| ADR zxr10DownloadServerIPv6Addr | 1.3.6.1.4.1.3902.3.6000.52.1.4.5 | Ipv6Address | read-write | The IPv6 address of the FTP/STFP server from
which to copy the configuration file. This object
can not be used with zxr10DownloadServerIPv4Addr at the
same time. |
| U32 zxr10DownloadServerListenPort | 1.3.6.1.4.1.3902.3.6000.52.1.4.6 | Unsigned32 | read-write | Listen port number of server. |
| STR zxr10DownloadServerUsername | 1.3.6.1.4.1.3902.3.6000.52.1.4.7 | DisplayString | read-write | User name for downloading via FTP or SFTP protocol.
This object must be created when the zxr10DownloadType
is FTP or SFTP. |
| STR zxr10DownloadServerPassword | 1.3.6.1.4.1.3902.3.6000.52.1.4.8 | DisplayString | read-write | User password for downloading via FTP or SFTP protocol.
This object must be created when the zxr10DownloadType
is FTP or SFTP. The value of zxr10DownloadServerPassword is masked with
asterisks for security when displaying. |
| STR zxr10DownloadFilePath | 1.3.6.1.4.1.3902.3.6000.52.1.4.9 | DisplayString | read-write | The destination file name (including the path, if applicable)
of the file. This node must be created regardless of which way to download. |
| INT zxr10DownloadState | 1.3.6.1.4.1.3902.3.6000.52.1.4.10 | INTEGER | read-only | The status of file download. The description of each status is given below:
idle: there is no downloading request.
running: files is downloading.
success: file downloading is completed and successful.
failure: download request is failure. |
| INT zxr10DownloadFailureCause | 1.3.6.1.4.1.3902.3.6000.52.1.4.11 | INTEGER | read-only | The cause of file download failure.
The description of each failure is given below:
noError: file is downloading or download successfully.
invalidFile: file name is invalid.
directError: the operation to the directory/file is forbidden or directory/file is error.
ftpNoResponse: can not recieve response from FTP.
sftpNoResponse: can not recieve response from SFTP.
noSuchFileOrDirect: no such file(s) or directory(s).
ftpTransmitFail: fail to transmit file by FTP server.
directCreateFail: fail to create directory.
otherTerminalRunning: copy-config is running in other terminal.
batchCommandRunning: batch command is running in other terminal.
copyFileFail: fail to copy file.
disconnect: can not connect FTP/SFTP server.
ftpServerDown: FTP server can not provide services.
sftpServerDown: SFTP server can not provide services.
parameterError: parameter is incorrect. |
| DAT zxr10DownloadStartTime | 1.3.6.1.4.1.3902.3.6000.52.1.4.12 | DateAndTime | read-only | Specifies the time the download last transitioned
to running, or 0 if the state has never transitioned to
running. |
| DAT zxr10DownloadEndTime | 1.3.6.1.4.1.3902.3.6000.52.1.4.13 | DateAndTime | read-only | End time of downloading file. |
| STR zxr10CLIStartrunMd5sum | 1.3.6.1.4.1.3902.3.6000.52.1.5 | DisplayString | read-only | The md5sum of startrun. If there is a startrun.dat on device, can get a hex string.
Otherwise, return zero-length string. |
