All MIBs › ZXR10-IF-QOS-MIB
Organization: ZTE Corporation
Last Updated: 2014-08-25
Category: ZTE ZXR10 Quality of Service
Description: Defines ZTE ZXR10 interface QoS policy parameters including traffic shaping, queuing, and scheduling configuration per interface.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-IF-QOS-MIB?
ZXR10-IF-QOS-MIB defines per-interface QoS policy parameters on ZTE ZXR10 routers/switches, covering traffic shaping, queuing, and scheduling configuration, including 802.1p CoS mapping, TTL-based QoS mode, and MLS (multi-layer switching) QoS mode settings per interface. It exposes configuration data mapping Layer 2/CoS markings (802.1p priority bits, inner/outer VLAN tag priority) to output queue behavior on a per-interface basis. As a QoS configuration MIB, its monitoring value is in confirming that traffic-prioritization policy is correctly and consistently applied per interface -- verifying that 802.1p or TTL-based QoS modes match intended design helps explain why certain traffic classes experience unexpected latency or drops during congestion. It builds on IEEE 802.1p CoS and general DiffServ-style QoS concepts as implemented within ZTE's ZXROS QoS framework. It is deployed on ZTE ZXR10 series routers/switches wherever per-interface traffic prioritization needs SNMP-based visibility and control. Engineers can download the ZXR10-IF-QOS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IF-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 series routers/switches
Monitoring Examples
An admin would poll zQosDot1pTable/zQosDot1pEntry (zQosDot1pStrifname) to check 802.1p-based QoS settings such as zQosDot1pBcvlanin/zQosDot1pBsvlanin (inbound C-VLAN/S-VLAN priority handling) and zQosDot1pBoutput (output queue mapping) for a given interface. Similarly, zTtlQosModeTable/zTtlQosModeEntry (zTtlQosModeUcinherimode) and zMlsQosModeTable/zMlsQosModeEntry would be checked to confirm TTL-based and MLS QoS inheritance modes are set as designed; an interface reporting an unexpected inheritance mode would explain misprioritized traffic during congestion.
What Can Be Monitored
- per-interface 802.1p CoS mapping
- inbound VLAN priority handling
- output queue mapping
- TTL-based QoS inheritance mode
- MLS QoS mode per interface
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
From ZXR10-SMI
| zxr10 | OBJECT-IDENTITY |
| zxr10RosngMIB | OBJECT-IDENTITY |
OIDs
RFC description
Quality of Service (QoS) configuration for interfaces on ZTE ZXR10 routers.
Start monitoring ZTE ZXR10 series routers/switches (per-interface 802.1p/TTL-QoS-mode config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.