ZXR10-MAC-PING-MIB

All MIBs › ZXR10-MAC-PING-MIB

Organization: ZTE Corporation.

Last Updated: 2015-10-28

Category: ZTE ZXR10 Diagnostics and OAM

Description: Defines ZTE ZXR10 MAC ping operations for Layer 2 connectivity testing between MAC endpoints.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MAC-PING-MIB?

ZXR10-MAC-PING-MIB is a ZTE enterprise MIB that implements Layer 2 MAC-ping connectivity testing on ZXR10 routers and switches, rooted under zxr10L2vpn.zxr10MacPingMIB (enterprises.3902.3.104.4). Its zxr10MacPingTable lets an operator configure a MAC-layer ping test — target zxr10PingMacDestMac address, egress interface, VLAN context (zxr10PingMacInternalVlanId, zxr10PingMacExternalVlanId, zxr10PingMacVlanId), packet count, timeout, and hop count — and control it via zxr10PingMacRosStatus (row status) with optional trap notification on completion (zxr10PingMacTrapOncompletion). Results land in zxr10PingMacResultTable, which reports sent/received packet counts and round-trip min/max/average times for each test instance, giving operators a way to actively probe L2VPN/MAC reachability between endpoints rather than relying only on passive counters. It is self-contained aside from standard SNMPv2-SMI/TC imports, and is deployed on ZXR10 routers and switches used as PE devices in L2VPN/VPLS deployments where MAC-layer reachability between customer endpoints needs active verification. Operators validating VPLS reachability commonly reference a ZXR10-MAC-PING-MIB MIB Browser session before initiating a test.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MAC-PING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router and switch series (L2VPN/VPLS-capable platforms)

Monitoring Examples

An operator sets a row in zxr10MacPingTable targeting a remote zxr10PingMacDestMac across a VPLS instance, then polls zxr10PingMacResultTable's zxr10PingMacResultSentPkts versus zxr10PingMacResultRcvPkts and zxr10PingMacResultRoundTripAvgTime; a large gap between sent and received packets would indicate a Layer 2 connectivity or VLAN mapping problem between the two MAC endpoints.

What Can Be Monitored

MAC ping test configuration (destination MAC, VLAN context, hop count)
MAC ping row status/administrative control
sent vs. received packet counts
round-trip min/max/average time

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
macpingNotifications	1.3.6.1.4.1.3902.3.104.4.3
NTF macpingTrapResult	1.3.6.1.4.1.3902.3.104.4.3.1			The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
zte	1.3.6.1.4.1.3902			ZTE MAC-PING MIB
zxr10	1.3.6.1.4.1.3902.3			zxr10 is the root OBJECT IDENTIFIER for ZTE routers and switches pruducts
zxr10L2vpn	1.3.6.1.4.1.3902.3.104
zxr10MacPingEntry	1.3.6.1.4.1.3902.3.104.4.1.1		not-accessible	mac ping information entry.
zxr10MacPingGlobalObjects	1.3.6.1.4.1.3902.3.104.4.4
zxr10MacPingMIB	1.3.6.1.4.1.3902.3.104.4
zxr10MacPingTable	1.3.6.1.4.1.3902.3.104.4.1		not-accessible	mac ping information table.
I32 zxr10PingMacControlOutEtherIf	1.3.6.1.4.1.3902.3.104.4.1.1.3	Integer32	read-write	output interface if-index
INT zxr10PingMacControlResultType	1.3.6.1.4.1.3902.3.104.4.1.1.8	INTEGER	read-write	result type
STR zxr10PingMacDestMac	1.3.6.1.4.1.3902.3.104.4.1.1.2	DisplayString	read-write	dest mac
INT zxr10PingMacEnable	1.3.6.1.4.1.3902.3.104.4.4.1	INTEGER	read-write	Control whether mac ping is enable.
STR zxr10PingMacEntryOwner	1.3.6.1.4.1.3902.3.104.4.1.1.11	DisplayString	read-write	entry owner
I32 zxr10PingMacExternalVlanId	1.3.6.1.4.1.3902.3.104.4.1.1.16	Integer32	read-write	External VlanId, which is optional. 0: do not configure external vlan.
STR zxr10PingMacExtResultDestHostName	1.3.6.1.4.1.3902.3.104.4.2.1.9	DisplayString	read-only	destination hostname
STR zxr10PingMacExtResultDestIfName	1.3.6.1.4.1.3902.3.104.4.2.1.8	DisplayString	read-only	destination interface
I32 zxr10PingMacExtResultInVlanId	1.3.6.1.4.1.3902.3.104.4.2.1.13	Integer32	read-only	in vlanid
I32 zxr10PingMacExtResultOutVlanId	1.3.6.1.4.1.3902.3.104.4.2.1.12	Integer32	read-only	out vlanid
STR zxr10PingMacExtResultSourceHostName	1.3.6.1.4.1.3902.3.104.4.2.1.11	DisplayString	read-only	source hostname
STR zxr10PingMacExtResultSourceIfName	1.3.6.1.4.1.3902.3.104.4.2.1.10	DisplayString	read-only	source interface
I32 zxr10PingMacHops	1.3.6.1.4.1.3902.3.104.4.1.1.7	Integer32	read-write	hops
INT zxr10PingMacIfOption	1.3.6.1.4.1.3902.3.104.4.1.1.4	INTEGER	read-write	option,default:none
MAC zxr10PingMacIfPeOption	1.3.6.1.4.1.3902.3.104.4.1.1.12	MacPingOptionType	read-write	Controls the type of the mac-ping request. 0: ce ping, need zxr10PingMacControlOutEtherIf 1: pe ping, need zxr10PingMacVfiName and zxr10PingMacPeerAddress
I32 zxr10PingMacInternalVlanId	1.3.6.1.4.1.3902.3.104.4.1.1.15	Integer32	read-write	Internal VlanId, which is optional. 0: do not configure internal vlan.
I32 zxr10PingMacPacketCount	1.3.6.1.4.1.3902.3.104.4.1.1.5	Integer32	read-write	packet count
IP zxr10PingMacPeerAddress	1.3.6.1.4.1.3902.3.104.4.1.1.14	IpAddress	read-write	The peer IP address for PE mac-ping.
zxr10PingMacResultEntry	1.3.6.1.4.1.3902.3.104.4.2.1		not-accessible	mac ping result entry.
STR zxr10PingMacResultEntryOwner	1.3.6.1.4.1.3902.3.104.4.2.1.14	DisplayString	read-only	entry owner
I32 zxr10PingMacResultRcvPkts	1.3.6.1.4.1.3902.3.104.4.2.1.3	Integer32	read-only	receive packets
I32 zxr10PingMacResultRoundTripAvgTime	1.3.6.1.4.1.3902.3.104.4.2.1.6	Integer32	read-only	average RTT
I32 zxr10PingMacResultRoundTripMaxTime	1.3.6.1.4.1.3902.3.104.4.2.1.5	Integer32	read-only	max RTT
I32 zxr10PingMacResultRoundTripMinTime	1.3.6.1.4.1.3902.3.104.4.2.1.4	Integer32	read-only	min RTT
I32 zxr10PingMacResultRoundWobbleAvgTime	1.3.6.1.4.1.3902.3.104.4.2.1.17	Integer32	read-only	average RWT
I32 zxr10PingMacResultRoundWobbleMaxTime	1.3.6.1.4.1.3902.3.104.4.2.1.16	Integer32	read-only	max RWT
I32 zxr10PingMacResultRoundWobbleMinTime	1.3.6.1.4.1.3902.3.104.4.2.1.15	Integer32	read-only	min RWT
I32 zxr10PingMacResultSentPkts	1.3.6.1.4.1.3902.3.104.4.2.1.2	Integer32	read-only	send packets
I32 zxr10PingMacResultSerial	1.3.6.1.4.1.3902.3.104.4.2.1.1	Integer32	read-only	serial number
zxr10PingMacResultTable	1.3.6.1.4.1.3902.3.104.4.2		not-accessible	mac ping result table.
INT zxr10PingMacResultType	1.3.6.1.4.1.3902.3.104.4.2.1.7	INTEGER	read-only	result type:(0:summary, 1:detail)
INT zxr10PingMacRosStatus	1.3.6.1.4.1.3902.3.104.4.1.1.10	INTEGER	read-write	This object allows to start ping or destroy entries in the zxr10MacPingTable.
I32 zxr10PingMacSerial	1.3.6.1.4.1.3902.3.104.4.1.1.1	Integer32	read-only	serial number
I32 zxr10PingMacTimeOut	1.3.6.1.4.1.3902.3.104.4.1.1.6	Integer32	read-write	timeout
T/F zxr10PingMacTrapOncompletion	1.3.6.1.4.1.3902.3.104.4.1.1.9	TruthValue	read-write	The value of this object determines when and whether to generate a notification for this entry.
STR zxr10PingMacVfiName	1.3.6.1.4.1.3902.3.104.4.1.1.13	DisplayString	read-write	The vpls/vpws name for PE mac-ping.
I32 zxr10PingMacVlanId	1.3.6.1.4.1.3902.3.104.4.1.1.17	Integer32	read-write	Vlan Id, which is optional. 0: do not configure vlan id.

RFC description

ZTE ZXR10 MAC ping diagnostic MIB for Layer 2 connectivity testing and VLAN reachability verification.

Start monitoring ZTE ZXR10 router and switch series (L2VPN/VPLS-capable platforms) (MAC-ping test/round-trip-time status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MAC-PING-MIB

What Is ZXR10-MAC-PING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description