ZTE-AN-INTERFACE-BRG-PERF-MIB

All MIBs › ZTE-AN-INTERFACE-BRG-PERF-MIB

Organization: ZTE Corporation

Last Updated: 2011-09-13

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node bridging interface performance counters for traffic analysis.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-INTERFACE-BRG-PERF-MIB?

ZTE-AN-INTERFACE-BRG-PERF-MIB is a performance-management module for the bridging (Layer 2 switching) interfaces on ZTE's Access Node product line. It exposes traffic-oriented performance counters for bridged interfaces -- packet and byte counts, error/discard counters, and similar interval-based statistics used to characterize Layer 2 forwarding load. Its monitoring value is in traffic and interface performance analysis: an operator polls these counters to see utilization trends on a bridging interface, spot rising error/discard rates that indicate congestion or a faulty port, and correlate performance dips with customer-reported issues. It builds on the same performance-counter conventions as the standard IETF IF-MIB and BRIDGE-MIB, implying a dependency on those interface/bridge object models even without directly importing them. It is deployed on ZTE access node equipment providing Ethernet bridging services, polled by NMS systems doing traffic-trend and capacity analysis. Engineers can download the ZTE-AN-INTERFACE-BRG-PERF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-INTERFACE-BRG-PERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Access Node (bridging interfaces)

Monitoring Examples

No sample object names were provided for this module; based on the description, an admin would poll per-interface bridged packet/byte counters and error/discard counts to trend traffic load on a ZTE access node's bridging ports, using a spike in discards as a signal of interface congestion or a hardware fault on that port.

What Can Be Monitored

bridged packet/byte counts
interface error counts
discard counts
traffic utilization trend

Imported Objects

From HC-PerfHist-TC-MIB

HCPerfCurrentCount

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From ZTE-AN-IF-MIB

zxAnSubIfIndex

OBJECT-TYPE

From ZTE-AN-SMI

zxAnInterface

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxAnBrgIfC15MInOctets OID:

Select a ZTE Access Node (bridging interfaces) (packet/byte/error/discard counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnBrgIfC15MInOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of octets received on the interface, including framing characters in current 15 minutes interval. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnInterfaceBrgPerfMib	1.3.6.1.4.1.3902.1082.30.33			The MIB module for the Performance Management of ZTE Access Node interface.
zxAnBrgIfPerfObjects	1.3.6.1.4.1.3902.1082.30.33.2
zxAnBrgIfCurr15MinPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.2		not-accessible	The 15 minutes interval performance data table of the bridge interfaces.
zxAnBrgIfCurr15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.2.1		not-accessible	The 15 minutes interval performance data entry of the bridge interfaces.
G32 zxAnBrgIfC15MTimeElapsed	1.3.6.1.4.1.3902.1082.30.33.2.2.1.1	Gauge32	read-only	Number of seconds that have elapsed since the beginning of the current 15 minutes interval.
C64 zxAnBrgIfC15MInOctetsEx	1.3.6.1.4.1.3902.1082.30.33.2.2.1.2	Counter64	read-only	The total number of octets received on the interface, including framing characters in current 15 minutes interval.
C64 zxAnBrgIfC15MInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.3	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in current 15 minutes interval.
C64 zxAnBrgIfC15MInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.4	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfC15MInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.5	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current 15 minutes interval.
C64 zxAnBrgIfC15MOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.2.1.6	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in curent 15 minutes interval.
C64 zxAnBrgIfC15MOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.7	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current 15 minutes interval.
C64 zxAnBrgIfC15MOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.8	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfC15MOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.2.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in 15 current minutes interval.
G32 zxAnBrgIfC15MInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.2.1.50	Gauge32	read-only	The received errored packet rate in current 15 minutes.
I32 zxAnBrgIfC15MInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.2.1.52	Integer32	read-only	An estimate of the interface's current received bandwidth using ratio in current 15 minutes.
I32 zxAnBrgIfC15MOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.2.1.53	Integer32	read-only	An estimate of the interface's current transmitted bandwidth using ratio in current 15 minutes.
INT zxAnBrgIfC15MReset	1.3.6.1.4.1.3902.1082.30.33.2.2.1.100	INTEGER	read-write	Clear all the current 15 minutes performance variables. When get this variable, always return 1.
zxAnBrgIfCurr1DayPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.3		not-accessible	The 1 day interval performance data table of the bridge interfaces.
zxAnBrgIfCurr1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.3.1		not-accessible	The 1 day interval performance data entry of the bridge interfaces.
G32 zxAnBrgIfC1DTimeElapsed	1.3.6.1.4.1.3902.1082.30.33.2.3.1.1	Gauge32	read-only	Number of seconds that have elapsed since the beginning of the current 1 day interval.
C64 zxAnBrgIfC1DInOctets	1.3.6.1.4.1.3902.1082.30.33.2.3.1.2	Counter64	read-only	The total number of octets received on the interface, including framing characters in current one day interval.
C64 zxAnBrgIfC1DInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.3	Counter64	read-only	The total number of octets received on the interface, including framing characters in current one day interval.
C64 zxAnBrgIfC1DInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.4	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfC1DInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.5	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current one day interval.
C64 zxAnBrgIfC1DOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.3.1.6	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in curent one day interval.
C64 zxAnBrgIfC1DOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.7	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval.
C64 zxAnBrgIfC1DOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.8	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfC1DOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.3.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval.
G32 zxAnBrgIfC1DInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.3.1.50	Gauge32	read-only	The received errored packet rate in current one day.
I32 zxAnBrgIfC1DInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.3.1.52	Integer32	read-only	An estimate of the interface's received bandwidth using ratio in current one day.
I32 zxAnBrgIfC1DOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.3.1.53	Integer32	read-only	An estimate of the interface's transmitted bandwidth using ratio in current one day.
INT zxAnBrgIfC1DReset	1.3.6.1.4.1.3902.1082.30.33.2.3.1.100	INTEGER	read-write	Clear all the current 1 day performance variables. When get this variable, always return 1.
zxAnBrgIfHis15MinPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.4		not-accessible	The 15 minutes interval history performance data table of the bridge interfaces.
zxAnBrgIfHis15MinPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.4.1		not-accessible	The 15 minutes interval performance data entry of the bridge interfaces.
I32 zxAnBrgIfH15MIntervalNo	1.3.6.1.4.1.3902.1082.30.33.2.4.1.1	Integer32	not-accessible	Performance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
T/F zxAnBrgIfH15MIntervalValidData	1.3.6.1.4.1.3902.1082.30.33.2.4.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
DAT zxAnBrgIfH15MDateTime	1.3.6.1.4.1.3902.1082.30.33.2.4.1.3	DateAndTime	read-only	The 15 minutes interval performance data generation time.
C64 zxAnBrgIfH15MInOctets	1.3.6.1.4.1.3902.1082.30.33.2.4.1.4	Counter64	read-only	The total number of octets received on the interface, including framing characters in current 15 historical interval.
C64 zxAnBrgIfH15MInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.5	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in historical 15 minutes interval.
C64 zxAnBrgIfH15MInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.6	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical 15 minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfH15MInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.7	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical 15 minutes interval.
C64 zxAnBrgIfH15MOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.4.1.8	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in historical 15 minutes interval.
C64 zxAnBrgIfH15MOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical 15 minutes interval.
C64 zxAnBrgIfH15MOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.10	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical 15 minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfH15MOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.4.1.11	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in 15 historical minutes interval.
G32 zxAnBrgIfH15MInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.4.1.50	Gauge32	read-only	The received errored packet rate in historical 15 minutes.
I32 zxAnBrgIfH15MInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.4.1.52	Integer32	read-only	An estimate of the interface's received bandwidth using ratio in historical 15 minutes.
I32 zxAnBrgIfH15MOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.4.1.53	Integer32	read-only	An estimate of the interface's transmitted bandwidth using ratio in historical 15 minutes.
zxAnBrgIfHis1DayPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.5		not-accessible	The 1 day interval history performance data table of the bridge interfaces.
zxAnBrgIfHis1DayPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.5.1		not-accessible	The 1 day interval performance data entry of the bridge interfaces.
I32 zxAnBrgIfH1DIntervalNo	1.3.6.1.4.1.3902.1082.30.33.2.5.1.1	Integer32	not-accessible	Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional.
T/F zxAnBrgIfH1DIntervalValidData	1.3.6.1.4.1.3902.1082.30.33.2.5.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
DAT zxAnBrgIfH1DDateTime	1.3.6.1.4.1.3902.1082.30.33.2.5.1.3	DateAndTime	read-only	The 1 day interval performance data generation time.
C64 zxAnBrgIfH1DInOctets	1.3.6.1.4.1.3902.1082.30.33.2.5.1.4	Counter64	read-only	The total number of octets received on the interface, including framing characters in historical one day interval.
C64 zxAnBrgIfH1DInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.5	Counter64	read-only	The total number of octets received on the interface, including framing characters in historical one day interval.
C64 zxAnBrgIfH1DInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.6	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfH1DInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.7	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical one day interval.
C64 zxAnBrgIfH1DOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.5.1.8	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in historical one day interval.
C64 zxAnBrgIfH1DOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval.
C64 zxAnBrgIfH1DOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.10	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfH1DOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.5.1.11	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval.
G32 zxAnBrgIfH1DInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.5.1.50	Gauge32	read-only	The received errored packet rate in historical one day.
I32 zxAnBrgIfH1DInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.5.1.52	Integer32	read-only	An estimate of the interface's received bandwidth using ratio in historical one day.
I32 zxAnBrgIfH1DOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.5.1.53	Integer32	read-only	An estimate of the interface's transmitted bandwidth using ratio in historical one day.
zxAnBrgIfAlmProfileConfTable	1.3.6.1.4.1.3902.1082.30.33.2.6		not-accessible	The performance alarm threshold profile table of the bridge interfaces.
zxAnBrgIfAlmProfileConfEntry	1.3.6.1.4.1.3902.1082.30.33.2.6.1		not-accessible	The performance alarm threshold profile table of the bridge interfaces.These variables in the profile configuration is optional,if not configured, it means the correspongding alarm is not reported, but the alarm and clear alarm threshold configuration is needed to bind.
STR zxAnBrgIfAlmProfileName	1.3.6.1.4.1.3902.1082.30.33.2.6.1.1	DisplayString	not-accessible	The profile name.
OID zxAnBrgIfPerfVariable	1.3.6.1.4.1.3902.1082.30.33.2.6.1.2	OBJECT IDENTIFIER	not-accessible	The object identifier of performance variables.
HCP zxAnBrgIfRiseAlmThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.3	HCPerfCurrentCount	read-create	The threshold for rising alarm.
HCP zxAnBrgIfClrRiseAlmThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.4	HCPerfCurrentCount	read-create	The threshold for rising alarm restore.
HCP zxAnBrgIfRiseWarnThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.5	HCPerfCurrentCount	read-create	The threshold for rising warning.
HCP zxAnBrgIfClrRiseWarnThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.6	HCPerfCurrentCount	read-create	The threshold for rising warning restore.
HCP zxAnBrgIfFallWarnThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.7	HCPerfCurrentCount	read-create	The threshold for falling warning.
HCP zxAnBrgIfClrFallWarnThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.8	HCPerfCurrentCount	read-create	The threshold for falling warning restore.
HCP zxAnBrgIfFallAlmThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.9	HCPerfCurrentCount	read-create	The threshold for falling alarm.
HCP zxAnBrgIfClrFallAlmThresh	1.3.6.1.4.1.3902.1082.30.33.2.6.1.10	HCPerfCurrentCount	read-create	The threshold for falling alarm restore.
BIT zxAnBrgIfThreshUsed	1.3.6.1.4.1.3902.1082.30.33.2.6.1.11	Bits	read-create	The threshold used flag.
ROW zxAnBrgIfAlmProfileConfRowStatus	1.3.6.1.4.1.3902.1082.30.33.2.6.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).
zxAnBrgIfAlmProfileApplyTable	1.3.6.1.4.1.3902.1082.30.33.2.7		not-accessible	The performance alarm threshold profile configuration table of the bridge interfaces.
zxAnBrgIfAlmProfileApplyEntry	1.3.6.1.4.1.3902.1082.30.33.2.7.1		not-accessible	The performance alarm threshold profile configuration entry of the bridge interfaces.
STR zxAnBrgIfAlmPrf	1.3.6.1.4.1.3902.1082.30.33.2.7.1.1	DisplayString	read-create	The performance alarm threshold profile.
ROW zxAnBrgIfAlmPrfApplyRowStatus	1.3.6.1.4.1.3902.1082.30.33.2.7.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).
zxAnBrgIfAlmProfileTable	1.3.6.1.4.1.3902.1082.30.33.2.8		not-accessible	The performance alarm threshold profile table of the bridge interfaces. It can be used to delete all of the performance alarm threshold profiles which has the same name configured in 'zxAnBrgIfAlmProfileConfTable'.
zxAnBrgIfAlmProfileEntry	1.3.6.1.4.1.3902.1082.30.33.2.8.1		not-accessible	The performance alarm threshold profile entry of the bridge interfaces.
ROW zxAnBrgIfAlmProfileRowStatus	1.3.6.1.4.1.3902.1082.30.33.2.8.1.50	RowStatus	read-create	The status of this conceptual row. To create a profile in this table, a manager must set this object to createAndGo(4). To delete a profile in this table, a manager must set this object to destroy(6).
zxAnBrgIfCurrMinPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.9		not-accessible	The minutes interval performance data table of the bridge interfaces.
zxAnBrgIfCurrMinPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.9.1		not-accessible	The minutes interval performance data entry of the bridge interfaces.
G32 zxAnBrgIfCMinTimeElapsed	1.3.6.1.4.1.3902.1082.30.33.2.9.1.1	Gauge32	read-only	Number of seconds that have elapsed since the beginning of the current minutes interval.
C64 zxAnBrgIfCMinInOctets	1.3.6.1.4.1.3902.1082.30.33.2.9.1.2	Counter64	read-only	The total number of octets received on the interface, including framing characters in current minutes interval.
C64 zxAnBrgIfCMinInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.3	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in current minutes interval.
C64 zxAnBrgIfCMinInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.4	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfCMinInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.5	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current minutes interval.
C64 zxAnBrgIfCMinOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.9.1.6	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in curent minutes interval.
C64 zxAnBrgIfCMinOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.7	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current minutes interval.
C64 zxAnBrgIfCMinOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.8	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfCMinOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.9.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current minutes interval.
G32 zxAnBrgIfCMinInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.9.1.50	Gauge32	read-only	The received errored packet rate in current minutes.
I32 zxAnBrgIfCMinInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.9.1.52	Integer32	read-only	An estimate of the interface's current received bandwidth using ratio in current minutes.
I32 zxAnBrgIfCMinOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.9.1.53	Integer32	read-only	An estimate of the interface's current transmitted bandwidth using ratio in current minutes.
INT zxAnBrgIfCMinReset	1.3.6.1.4.1.3902.1082.30.33.2.9.1.100	INTEGER	read-write	Clear all the current minutes performance variables. When get this variable, always return 1.
zxAnBrgIfHisMinPerfTable	1.3.6.1.4.1.3902.1082.30.33.2.10		not-accessible	The minutes interval history performance data table of the bridge interfaces.
zxAnBrgIfHisMinPerfEntry	1.3.6.1.4.1.3902.1082.30.33.2.10.1		not-accessible	The minutes interval history performance data entry of the bridge interfaces.
I32 zxAnBrgIfHMinIntervalNo	1.3.6.1.4.1.3902.1082.30.33.2.10.1.1	Integer32	not-accessible	Performance data interval number.
T/F zxAnBrgIfHMinIntervalValidData	1.3.6.1.4.1.3902.1082.30.33.2.10.1.2	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
DAT zxAnBrgIfHMinDateTime	1.3.6.1.4.1.3902.1082.30.33.2.10.1.3	DateAndTime	read-only	The minutes interval performance data generation time.
C64 zxAnBrgIfHMinInOctets	1.3.6.1.4.1.3902.1082.30.33.2.10.1.4	Counter64	read-only	The total number of octets received on the interface, including framing characters in current historical interval.
C64 zxAnBrgIfHMinInUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.5	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in historical minutes interval.
C64 zxAnBrgIfHMinInMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.6	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfHMinInBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.7	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical minutes interval.
C64 zxAnBrgIfHMinOutOctets	1.3.6.1.4.1.3902.1082.30.33.2.10.1.8	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters in historical minutes interval.
C64 zxAnBrgIfHMinOutUcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical minutes interval.
C64 zxAnBrgIfHMinOutMcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.10	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
C64 zxAnBrgIfHMinOutBcastPkts	1.3.6.1.4.1.3902.1082.30.33.2.10.1.11	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical minutes interval.
G32 zxAnBrgIfHMinInErroredPktRate	1.3.6.1.4.1.3902.1082.30.33.2.10.1.50	Gauge32	read-only	The received errored packet rate in historical minutes.
I32 zxAnBrgIfHMinInBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.10.1.52	Integer32	read-only	An estimate of the interface's received bandwidth using ratio in historical minutes.
I32 zxAnBrgIfHMinOutBwUsingRatio	1.3.6.1.4.1.3902.1082.30.33.2.10.1.53	Integer32	read-only	An estimate of the interface's transmitted bandwidth using ratio in historical minutes.
zxAnBrgIfPerfConformance	1.3.6.1.4.1.3902.1082.30.33.4
zxAnBrgIfPerfCompliances	1.3.6.1.4.1.3902.1082.30.33.4.1
zxAnBrgIfPerfCompliance	1.3.6.1.4.1.3902.1082.30.33.4.1.1			The compliance statement for entities which implement the ZTE-AN-INTERFACE-BRG-PERF-MIB.
zxAnBrgIfPerfGroups	1.3.6.1.4.1.3902.1082.30.33.4.2
zxAnBrgIfPerfCurr15MinGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.1			A collection of objects providing for 15 minutes interval performance data of interfaces.
zxAnBrgIfPerfCurr1DayGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.2			A collection of objects providing 1 day interval performance data of interfaces.
zxAnBrgIfPerfHis15MinGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.3			A collection of objects providing for 15 minutes interval performance data of interfaces.
zxAnBrgIfPerfHis1DayGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.4			A collection of objects providing 1 day interval performance data of interfaces.
zxAnBrgIfPerfAlmProfileGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.5			A collection of objects providing for performance alarm threshold profile of interfaces.
zxAnBrgIfAlmProfileApplyGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.6			A collection of objects providing for performance alarm threshold profile apply control configuration information.
zxAnBrgIfAlmProfileGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.7			A collection of objects providing for performance alarm threshold profile configuration information.
zxAnBrgIfPerfCurrMinGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.8			A collection of objects providing for minutes interval performance data of interfaces.
zxAnBrgIfPerfHisMinGroup	1.3.6.1.4.1.3902.1082.30.33.4.2.9			A collection of objects providing for minutes interval performance data of interfaces.

RFC description

Performance management for ZTE access node bridge interfaces with 15-minute and daily performance data collection.

Start monitoring ZTE Access Node (bridging interfaces) (packet/byte/error/discard counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-INTERFACE-BRG-PERF-MIB