ZXR10-ROUTE-MAP-MIB

All MIBs › ZXR10-ROUTE-MAP-MIB

Organization: ZTE Corporation

Last Updated: 2018-02-09

Category: ZTE ZXR10 IP Routing

Description: Manages ZTE ZXR10 route map policy definitions including match conditions and set actions for routing policy.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-ROUTE-MAP-MIB?

ZXR10-ROUTE-MAP-MIB is a ZTE private module implementing the Route Map (RMAP) protocol's managed objects on ZXR10 routers, used to define routing policy rules that match and act on route attributes. It exposes configuration data such as named route-map sequences, match conditions (e.g., AS-path matching), set actions, and row-status control for policy entries. This MIB is primarily a policy-configuration module rather than a runtime performance/fault monitor, though its row-status and notification objects can be polled to confirm a route-map entry is active and correctly applied, and to catch policy misconfigurations affecting route selection. It depends on standard BGP/routing textual conventions (e.g., AS-path representations) shared with BGP4-MIB-style modules. It is deployed on ZXR10 routers wherever route-map-based policy is used to control BGP or other routing protocol route redistribution and selection. Engineers can download the ZXR10-ROUTE-MAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-ROUTE-MAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router (BGP/routing policy)

Monitoring Examples

An administrator would inspect zxr10RMAPNameTable entries (zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPAction, zxr10RMAPRowStatus) to confirm a named route-map sequence is active and its action (permit/deny) is as intended. Checking zxr10RMAPMatchAspathTable (zxr10RMAPAspathName, zxr10RMAPAspathMatchName) verifies which AS-path match list a given route-map sequence references. A route-map entry with an unexpected zxr10RMAPRowStatus (e.g., notInService) would reveal a policy that silently stopped applying, potentially causing unintended route advertisement or suppression.

What Can Be Monitored

route-map sequence configuration
route-map action (permit/deny)
route-map row status
AS-path match list membership

Imported Objects

From IPV6-TC

Ipv6Address

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From ZXR10-SMI

zxr10	OBJECT-IDENTITY
zxr10RosngMIB	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10RMAPMIB	1.3.6.1.4.1.3902.3.6000.604			The MIB module to describe the RMAP protocol.
zxr10RMAPGlobalObjects	1.3.6.1.4.1.3902.3.6000.604.1
zxr10RMAPObjects	1.3.6.1.4.1.3902.3.6000.604.2
zxr10RMAPRuleObjects	1.3.6.1.4.1.3902.3.6000.604.2.1
zxr10RMAPNameTable	1.3.6.1.4.1.3902.3.6000.604.2.1.1		not-accessible	Route-map Name Table
zxr10RMAPNameEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.1.1		not-accessible	Route-map Name
STR zxr10RMAPName	1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPAction	1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.3	RmapPermitDeny	read-create	permit:Match success deny :Match failed
ROW zxr10RMAPRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchAspathTable	1.3.6.1.4.1.3902.3.6000.604.2.1.2		not-accessible	Route-map Match Aspath Table
zxr10RMAPMatchAspathEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1		not-accessible	Match BGP as-path list
STR zxr10RMAPAspathName	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPAspathSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPAspathNo	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.3	Integer32	not-accessible	Aspath List Number. The range of config is 0 to 199. Each sequence has 10 match aspath items at most
STR zxr10RMAPAspathMatchName	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.4	DisplayString	not-accessible	Name of Aspath (0-31 characters)
ROW zxr10RMAPAspathRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchCommunityTable	1.3.6.1.4.1.3902.3.6000.604.2.1.3		not-accessible	Route-map Match Community Table
zxr10RMAPMatchCommunityEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1		not-accessible	Match BGP community list
STR zxr10RMAPCommunityName	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPCommunitySequence	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPCommunityNo	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.3	Integer32	not-accessible	Community list number. The range of config is 0 to 499. Each sequence has 10 match community items at most.
STR zxr10RMAPCommunityMatchName	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.4	DisplayString	not-accessible	Name of Community (0-31 characters)
ROW zxr10RMAPCommunityRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchExtCommunityTable	1.3.6.1.4.1.3902.3.6000.604.2.1.4		not-accessible	Route-map Match ExtCommunity Table
zxr10RMAPMatchExtCommunityEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1		not-accessible	Match BGP extcommunity list
STR zxr10RMAPExtCommunityName	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPExtCommunitySequence	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPExtCommunityNo	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.3	Integer32	not-accessible	ExtCommunity list number. The range of config is 0 to 500. Each sequence has 10 match extcommunity items at most.
STR zxr10RMAPExtCommunityMatchName	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.4	DisplayString	not-accessible	Name of ExtCommunity (0-31 characters)
ROW zxr10RMAPExtCommunityRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchInterfaceTable	1.3.6.1.4.1.3902.3.6000.604.2.1.5		not-accessible	Route-map Match Interface Table
zxr10RMAPMatchInterfaceEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.5.1		not-accessible	Match first hop interface of route
STR zxr10RMAPInterfaceName	1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPInterfaceSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPInterface	1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.3	DisplayString	not-accessible	Interface Name(1-31 characters). Each sequence has 10 match interface items at most. This match item supports these types of interface: [PORT-CLASS-FEI, PORT-CLASS-GEI-END] [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-E1-END] [PORT-CLASS-E1-C-CH, PORT-TYPE-ULEI] [PORT-CLASS-GVI, PORT-CLASS-GVI-END] [PORT-CLASS-QX, PORT-CLASS-QX-END] [PORT-TYPE-MANAGE, PORT-TYPE-MANAGE] [PORT-CLASS-DSL, PORT-CLASS-DSL-END] [PORT-CLASS-SPECIAL, PORT-TYPE-SUPERQINQ] [PORT-TYPE-TE-TUNNEL, PORT-TYPE-IPSEC-TUNNEL] [PORT-TYPE-CIP, PORT-TYPE-QX-LOGIC].
ROW zxr10RMAPInterfaceRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpAddressAclTable	1.3.6.1.4.1.3902.3.6000.604.2.1.6		not-accessible	Route-map Match IpAddress Table(match ip address by acl).
zxr10RMAPMatchIpAddressAclEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1		not-accessible	Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by pfl. If zxr10RMAPIsConfigAcl is true,it expresses that this config is match ip address by acl.
STR zxr10RMAPMatchAclName	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchAclSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPAclName	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ip address items at most.
T/F zxr10RMAPIsConfigAcl	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.4	TruthValue	not-accessible	It expresses that this config is match ip address by acl.
ROW zxr10RMAPMatchAclRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpAddressPflTable	1.3.6.1.4.1.3902.3.6000.604.2.1.7		not-accessible	Route-map Match IpAddress Table(match ip address by pfl)
zxr10RMAPMatchIpAddressPflEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1		not-accessible	Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by acl.
STR zxr10RMAPMatchPflName	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchPflSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPPflName	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.3	DisplayString	not-accessible	Name of a prefix list (1-31 characters). Each sequence has 10 match ip address items at most.
T/F zxr10RMAPIsConfigPfl	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.4	TruthValue	not-accessible	It expresses that this config is match ip address by pfl.
ROW zxr10RMAPMatchPflRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpMetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.8		not-accessible	Route-map Match IpMetric Table
zxr10RMAPMatchIpMetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.8.1		not-accessible	Match metric of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPIpMetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpMetricSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPIpMetric	1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.3	Unsigned32	not-accessible	Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip metric items at most.
ROW zxr10RMAPIpMetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpNextHopTable	1.3.6.1.4.1.3902.3.6000.604.2.1.9		not-accessible	Route-map Match IpNextHop Table
zxr10RMAPMatchIpNextHopEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.9.1		not-accessible	Match next-hop address of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPIpNextHopName	1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpNextHopSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPIpNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ip next-hop items at most.
ROW zxr10RMAPIpNextHopRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpTagTable	1.3.6.1.4.1.3902.3.6000.604.2.1.10		not-accessible	Route-map Match IpTag Table
zxr10RMAPMatchIpTagEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.10.1		not-accessible	Match tag of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPIpTagName	1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpTagSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPIpTag	1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.3	Unsigned32	not-accessible	Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip tag items at most.
ROW zxr10RMAPIpTagRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6AddressTable	1.3.6.1.4.1.3902.3.6000.604.2.1.11		not-accessible	Route-map Match Ipv6Address Table
zxr10RMAPMatchIpv6AddressEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.11.1		not-accessible	Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPIpv6AddressName	1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpv6AddressSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPIpv6Address	1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
ROW zxr10RMAPIpv6AddressRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6MetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.12		not-accessible	Route-map Match Ipv6Metric Table
zxr10RMAPMatchIpv6MetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.12.1		not-accessible	Match metric of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPIpv6MetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpv6MetricSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPIpv6Metric	1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.3	Unsigned32	not-accessible	Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 metric items at most.
ROW zxr10RMAPIpv6MetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6NextHopTable	1.3.6.1.4.1.3902.3.6000.604.2.1.13		not-accessible	Route-map Match Ipv6NextHop Table
zxr10RMAPMatchIpv6NextHopEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.13.1		not-accessible	Match next-hop address of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPIpv6NextHopName	1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpv6NextHopSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPIpv6NextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 next-hop items at most.
ROW zxr10RMAPIpv6NextHopRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6TagTable	1.3.6.1.4.1.3902.3.6000.604.2.1.14		not-accessible	Route-map Match Ipv6Tag Table
zxr10RMAPMatchIpv6TagEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.14.1		not-accessible	Match tag of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPIpv6TagName	1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpv6TagSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPIpv6Tag	1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.3	Unsigned32	not-accessible	Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 tag items at most.
ROW zxr10RMAPIpv6TagRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchRdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.15		not-accessible	Route-map Match Rd Table
zxr10RMAPMatchRdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.15.1		not-accessible	Match BGP/VPN rd list
STR zxr10RMAPMatchRdName	1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchRdSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchRd	1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.3	Integer32	not-accessible	Rd-list number. The range of config is 1 to 500. 0 is invalid value. Each sequence has 10 match rd-list items at most.
ROW zxr10RMAPMatchRdRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchRouteTypeTable	1.3.6.1.4.1.3902.3.6000.604.2.1.16		not-accessible	Route-map Match RouteType Table
zxr10RMAPMatchRouteTypeEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1		not-accessible	Match route-type of route
STR zxr10RMAPMatchRouteTypeName	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchRouteTypeSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchRouteType	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.3	RmapMatchRouteType	not-accessible	local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11.
RMA zxr10RMAPMatchExternType	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.4	RmapMatchRouteType	not-accessible	type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7.
ROW zxr10RMAPMatchRouteTypeRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetAspathTable	1.3.6.1.4.1.3902.3.6000.604.2.1.17		not-accessible	Route-map Set Aspath Table
zxr10RMAPSetAspathEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1		not-accessible	Set prepend string for a BGP as-path attribute. 0 is invalid value.
STR zxr10RMAPSetAspathName	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetAspathSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPSetAspathAsnd1	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.3	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd2	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.4	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd3	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.5	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd4	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.6	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd5	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.7	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd6	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.8	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd7	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.9	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd8	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.10	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd9	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.11	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
U32 zxr10RMAPSetAspathAsnd10	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.12	Unsigned32	read-create	AS number. The range of config is 1 to 4294967295.
RMA zxr10RMAPSetAspathPrepOrRep	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.13	RmapPrependReplace	read-create	Set aspath prepend or replace,prepend is 1,replace is 2
ROW zxr10RMAPSetAspathRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetCommunityConstTable	1.3.6.1.4.1.3902.3.6000.604.2.1.18		not-accessible	Route-map Set Community Table
zxr10RMAPSetCommunityConstEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1		not-accessible	Set BGP community attribute. The value of config includes: internet Internet(Well known community) no-advertise Do not advertise to any peer no-export Do not export to next AS no-export-subconfed Do not send outside local AS none No community attribute. If set community none has been setted, other types of set community can't be setted. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive.
STR zxr10RMAPSetCommName	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetCommSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.2	Integer32	not-accessible	Sequence of Route-map. The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetCommIsAddtive	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.3	RmapSetComm	not-accessible	additive Add to the existing community. Value is 5. none No community attribute. Value is 6.
RMA zxr10RMAPSetCommConstVal	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.4	RmapSetComm	not-accessible	internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3.
ROW zxr10RMAPSetCommConstRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetCommunityAsnnTable	1.3.6.1.4.1.3902.3.6000.604.2.1.19		not-accessible	Route-map Set Community Table
zxr10RMAPSetCommunityAsnnEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1		not-accessible	Set BGP community attribute in aa:nn format. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive. If zxr10RMAPSetCommAsnn is setted with value 0:0 , the config will transform to config of set community internet. If zxr10RMAPSetCommAsnn is setted with value 0:X , the config will transform to config of set community X in uint format. If zxr10RMAPSetCommUint is setted with value 65535:65281, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 65535:65282, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 65535:65283, the config will transform to config of set community no-export-subconfed.
STR zxr10RMAPSetCommAsnnName	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetCommAsnnSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetCommAsnnIsAddtive	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.3	RmapSetComm	not-accessible	additive Add to the existing community. Value is 5.
STR zxr10RMAPSetCommAsnn	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.4	DisplayString	not-accessible	Community number in aa:nn format. The range of aa is 0 to 65535. The range of nn is 0 to 65535. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
ROW zxr10RMAPSetCommAsnnRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetCommunityUintTable	1.3.6.1.4.1.3902.3.6000.604.2.1.20		not-accessible	Route-map Set Community Table
zxr10RMAPSetCommunityUintEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1		not-accessible	Set BGP community attribute in Unsigned32 format. If set community has been setted with addtive attribute, other configs of set community can't be setted without addtive attribute. If zxr10RMAPSetCommUint is setted with value which is larger than 65535, the config will transform to config of set community X:Y in ASNN format. For example,set community 65536 will transform to set community 1:1. If zxr10RMAPSetCommUint is setted with value 4294967041, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 4294967042, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 4294967043, the config will transform to config of set community no-export-subconfed.
STR zxr10RMAPSetCommUintName	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetCommUintSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetCommUintIsAddtive	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.3	RmapSetComm	not-accessible	additive Add to the existing community. Value is 5.
U32 zxr10RMAPSetCommUint	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.4	Unsigned32	not-accessible	Community number in unsigned32 format. The range of config is 1 to 4294967295.
ROW zxr10RMAPSetCommUintRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetDampeningTable	1.3.6.1.4.1.3902.3.6000.604.2.1.21		not-accessible	Route-map Set Dampening Table
zxr10RMAPSetDampeningEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1		not-accessible	Set BGP route flap dampening parameters
STR zxr10RMAPSetDampeningName	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetDampeningSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetDampeningHalfLife	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.3	Integer32	read-create	Half-life time for the penalty. The range of config is 1 to 45. The value for half-life should be smaller than max duration to suppress.
I32 zxr10RMAPSetDampeningReuse	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.4	Integer32	read-create	Penalty to start reusing a route. The range of config is 1 to 20000. The value for reusing should be smaller than the value for suppressing.
I32 zxr10RMAPSetDampeningSuppress	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.5	Integer32	read-create	Penalty to start suppressing a route. The range of config is 1 to 20000. The value for suppressing should be larger than the value for reusing.
I32 zxr10RMAPSetDampeningMaxSupTime	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.6	Integer32	read-create	Maximum duration to suppress a stable route. The range of config is 1 to 255. The value for max duration to suppress should be larger than half-life.
ROW zxr10RMAPSetDampeningRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetDscpTable	1.3.6.1.4.1.3902.3.6000.604.2.1.22		not-accessible	Route-map Set Dscp Table
zxr10RMAPSetDscpEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.22.1		not-accessible	Set DSCP for PBR. This set item conflicts with these items below: set ip precedence set ip tos set ipv6 precedence set ipv6 traffic-class
STR zxr10RMAPSetDscpName	1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetDscpSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetDscp	1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.3	Integer32	read-create	Type of service value. The range of config is 0 to 63. 255 is invalid value.
ROW zxr10RMAPSetDscpRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetRtTable	1.3.6.1.4.1.3902.3.6000.604.2.1.23		not-accessible	Route-map Set Rt Table
zxr10RMAPSetRtEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1		not-accessible	Set Transitive Route Target extended community. If set extcommunity rt-trans remove has been setted, other types of set extcommunity can't be setted. If set extcommunity rt-trans has been setted with addtive attribute, other configs of set extcommunity rt-trans can't be setted without addtive attribute.
STR zxr10RMAPSetRtName	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetRtSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetRtAsnn	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.3	DisplayString	not-accessible	VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
RMA zxr10RMAPSetRtReOrAdd	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.4	RmapSetRt	not-accessible	additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7.
ROW zxr10RMAPSetRtRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetSooTable	1.3.6.1.4.1.3902.3.6000.604.2.1.24		not-accessible	Route-map Set Soo Table
zxr10RMAPSetSooEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1		not-accessible	Transitive Site-of-Origin extended community. If set extcommunity soo-trans remove has been setted, other types of set extcommunity can't be setted. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
STR zxr10RMAPSetSooName	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetSooSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetSooAsnn	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.3	DisplayString	read-create	VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535.
RMA zxr10RMAPSetSooRemove	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.4	RmapSetRt	read-create	Remove the existing extcommunity.Value is 7
ROW zxr10RMAPSetSooRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetGlobalTable	1.3.6.1.4.1.3902.3.6000.604.2.1.25		not-accessible	Route-map Set Global Table
zxr10RMAPSetGlobalEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1		not-accessible	Set global route for PBR. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set ip path set ipv6 path set vrf
STR zxr10RMAPSetGlobalName	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetGlobalSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
T/F zxr10RMAPSetGlobal	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.3	TruthValue	read-create	It expresses that whether this config is setted or not.
IP zxr10RMAPSetGlobalIPAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.4	IpAddress	read-create	IP address of next hop. This attribut may be setted or not. 0 is invaid value.
RMA zxr10RMAPSetGlobalIpConst	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.5	RmapSetGlobalIpConst	read-create	If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 3
RMA zxr10RMAPSetGlobalNextHopConst	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.6	RmapSetGlobalNextHopConst	read-create	If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 1
ROW zxr10RMAPSetGlobalRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetInterfaceTable	1.3.6.1.4.1.3902.3.6000.604.2.1.26		not-accessible	Route-map Set Interface Table
zxr10RMAPSetInterfaceEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.26.1		not-accessible	Set output interface. Each sequence has 10 set interface items at most. This set item supports these types of interface: [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-OC-END] PORT-TYPE-NULL PORT-TYPE-TE-TUNNEL PORT-TYPE-GRE-TUNNEL PORT-TYPE-OC3-C-E1 PORT-TYPE-OC3-C-E1-TS PORT-TYPE-E1-C-TS [PORT-TYPE-DIALER,PORT-TYPE-DIALER]. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetInterfaceName	1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetInterfaceSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetInterface	1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.3	DisplayString	not-accessible	Interface Name. Each sequence has 10 set interface items at most.
ROW zxr10RMAPSetInterfaceRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpMetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.27		not-accessible	Route-map Set IpMetric Table
zxr10RMAPSetIpMetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1		not-accessible	Set metric value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPSetIpMetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpMetricSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetIpMetricAct	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.3	RmapSetMetricAct	read-create	plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
U32 zxr10RMAPSetIpMetricValue	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.4	Unsigned32	read-create	Metric value. The range of config is 0 to 4294967295
ROW zxr10RMAPSetIpMetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpMetricTypeTable	1.3.6.1.4.1.3902.3.6000.604.2.1.28		not-accessible	Route-map Set IpMetricType Table
zxr10RMAPSetIpMetricTypeEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.28.1		not-accessible	Set type of metric for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPSetIpMetricTypeName	1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpMetricTypeSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetIpMetricType	1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.3	RmapSetMetricType	read-create	external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value.
ROW zxr10RMAPSetIpMetricTypeRowStat	1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpNextHopTable	1.3.6.1.4.1.3902.3.6000.604.2.1.29		not-accessible	Route-map Set IpNextHop Table
zxr10RMAPSetIpNextHopEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1		not-accessible	Set Next hop address. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetIpNextHopName	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpNextHopSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
IP zxr10RMAPSetIpNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.3	IpAddress	not-accessible	IP address of next hop. 0 is invalid value. Each sequence has 10 set ip next-hop items at most.
STR zxr10RMAPSetIpNextHopSqa	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.4	DisplayString	read-create	Track name. This attribut may be setted or not.
ROW zxr10RMAPSetIpNextHopRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpPathTable	1.3.6.1.4.1.3902.3.6000.604.2.1.30		not-accessible	Route-map Set IpPath Table
zxr10RMAPSetIpPathEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1		not-accessible	Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
STR zxr10RMAPIpPathName	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpPathSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetIpPathIntf	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.3	DisplayString	read-create	Name of Interface (1-31 characters)
IP zxr10RMAPSetIpPathNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.4	IpAddress	read-create	IP address of next hop.0 is invalid value.
ROW zxr10RMAPSetIpPathRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpPrecTable	1.3.6.1.4.1.3902.3.6000.604.2.1.31		not-accessible	Route-map Set IpPrec Table
zxr10RMAPSetIpPrecEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1		not-accessible	Set precedence field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp. If zxr10RMAPSetIpPrec is getted with value 255, it expresses this config is invalid.
STR zxr10RMAPSetIpPrecName	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpPrecSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetIpPrec	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.3	Integer32	read-create	Precedence value. The range of config is 0 to 7. 255 is invalid value. If zxr10RMAPSetIpPrec is setted with valid value, zxr10RMAPSetIpPrecMap should be setted with 255.
RMA zxr10RMAPSetIpPrecMap	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.4	RmapSetPrec	read-create	critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpPrecMap is setted with valid value, zxr10RMAPSetIpPrec should be setted with 255.
ROW zxr10RMAPSetIpPrecRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpTagTable	1.3.6.1.4.1.3902.3.6000.604.2.1.32		not-accessible	Route-map Set IpTag Table
zxr10RMAPSetIpTagEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.32.1		not-accessible	Set tag value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPSetIpTagName	1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpTagSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPSetIpTag	1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.3	Unsigned32	read-create	Set tag value for destination routing protocol. The range of config is 0 to 4294967295.
ROW zxr10RMAPSetIpTagRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpTosTable	1.3.6.1.4.1.3902.3.6000.604.2.1.33		not-accessible	Route-map Set IpTos Table
zxr10RMAPSetIpTosEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1		not-accessible	Set type of service field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp
STR zxr10RMAPSetIpTosName	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpTosSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetIpTos	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.3	Integer32	read-create	Type of service value. The range of config is 0 to 15. 255 is invalid value. If zxr10RMAPSetIpTos is setted with valid value, zxr10RMAPSetIpTosMap should be setted with 255.
RMA zxr10RMAPSetIpTosMap	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.4	RmapSetTos	read-create	max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1) 255 is invalid value. If zxr10RMAPSetIpTosMap is setted with valid value, zxr10RMAPSetIpTos should be setted with 255.
ROW zxr10RMAPSetIpTosRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6MetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.34		not-accessible	Route-map Set Ipv6Metric Table
zxr10RMAPSetIpv6MetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1		not-accessible	Set metric value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPSetIpv6MetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6MetricSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetIpv6MetricAct	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.3	RmapSetMetricAct	read-create	plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
U32 zxr10RMAPSetIpv6MetricValue	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.4	Unsigned32	read-create	Metric value. The range of config is 0 to 4294967295.
ROW zxr10RMAPSetIpv6MetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6MetricTypeTable	1.3.6.1.4.1.3902.3.6000.604.2.1.35		not-accessible	Route-map Set Ipv6MetricType Table
zxr10RMAPSetIpv6MetricTypeEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.35.1		not-accessible	Set type of metric for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPSetIpv6MetricTypeName	1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6MetricTypeSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetIpv6MetricType	1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.3	RmapSetMetricType	read-create	external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value
ROW zxr10RMAPSetIpv6MetricTypeRowSta	1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6NextHopTable	1.3.6.1.4.1.3902.3.6000.604.2.1.36		not-accessible	Route-map Set IpNextHop Table
zxr10RMAPSetIpv6NextHopEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.36.1		not-accessible	Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetIpv6NextHopName	1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6NextHopSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
ADR zxr10RMAPSetIpv6NextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.3	Ipv6Address	not-accessible	IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
ROW zxr10RMAPSetIpv6NextHopRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6PathTable	1.3.6.1.4.1.3902.3.6000.604.2.1.37		not-accessible	Route-map Set Ipv6Path Table
zxr10RMAPSetIpv6PathEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1		not-accessible	Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetIpv6PathName	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6PathSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetIpv6PathIntf	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.3	DisplayString	read-create	Name of Interface (1-31 characters)
ADR zxr10RMAPSetIpv6PathNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.4	Ipv6Address	read-create	IPv6 address of next hop.0 is invalid value.
ROW zxr10RMAPSetIpv6PathRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6PrecTable	1.3.6.1.4.1.3902.3.6000.604.2.1.38		not-accessible	Route-map Set Ipv6Prec Table
zxr10RMAPSetIpv6PrecEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1		not-accessible	Set precedence field. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp 255 is invalid value.
STR zxr10RMAPSetIpv6precName	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6precSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetIpv6prec	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.3	Integer32	read-create	Precedence value. 255 is invalid. The range of config is 0 to 7. If zxr10RMAPSetIpv6prec is setted with valid value, zxr10RMAPSetIpv6precMap should be setted with 255.
RMA zxr10RMAPSetIpv6precMap	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.4	RmapSetPrec	read-create	critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpv6precMap is setted with valid value, zxr10RMAPSetIpv6prec should be setted with 255.
ROW zxr10RMAPSetIpv6precRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6TagTable	1.3.6.1.4.1.3902.3.6000.604.2.1.39		not-accessible	Route-map Set Ipv6Tag Table
zxr10RMAPSetIpv6TagEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.39.1		not-accessible	Set tag value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPSetIpv6TagName	1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6TagSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPSetIpv6Tag	1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.3	Unsigned32	read-create	Precedence value. The range of config is 0 to 4294967295.
ROW zxr10RMAPSetIpv6TagRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6TrafficTable	1.3.6.1.4.1.3902.3.6000.604.2.1.40		not-accessible	Route-map Set Ipv6Traffic Table
zxr10RMAPSetIpv6TrafficEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.40.1		not-accessible	Set IPv6 traffic-class. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp
STR zxr10RMAPSetIpv6TrafficName	1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6TrafficSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetIpv6Traffic	1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.3	Integer32	read-create	Value of IPv6 traffic-class. The range of config is 0 to 255.
ROW zxr10RMAPSetIpv6TrafficRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetLevelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.41		not-accessible	Route-map Set Level Table
zxr10RMAPSetLevelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.41.1		not-accessible	Set where to import route
STR zxr10RMAPSetLevelName	1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetLevelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetLevel	1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.3	RmapSetLevel	read-create	level-1 Import into a level-1 area.Value is 1. level-1-2 Import into level-1 and level-2.Value is 3. level-2 Import into level-2 sub-domain.Value is 2. 0 is invalid value.
ROW zxr10RMAPSetLevelRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetLocalPreTable	1.3.6.1.4.1.3902.3.6000.604.2.1.42		not-accessible	Route-map Set LocalPreference Table
zxr10RMAPSetLocalPreEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.42.1		not-accessible	Set BGP local preference path attribute.
STR zxr10RMAPSetLocalPreName	1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetLocalPreSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
U32 zxr10RMAPSetLocalPre	1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.3	Unsigned32	read-create	Preference value. The range of config is 0 to 4294967295.
ROW zxr10RMAPSetLocalPreRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetMplsTable	1.3.6.1.4.1.3902.3.6000.604.2.1.43		not-accessible	Route-map Set Mpls-label Table
zxr10RMAPSetMplsEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.43.1		not-accessible	Set MPLS label for prefix
STR zxr10RMAPSetMplsName	1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetMplsSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
T/F zxr10RMAPSetMpls	1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.3	TruthValue	read-create	Set MPLS label for prefix. It expresses that whether this config is valid or not.
ROW zxr10RMAPSetMplsRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetNextHopTable	1.3.6.1.4.1.3902.3.6000.604.2.1.44		not-accessible	Route-map Set NextHop Table
zxr10RMAPSetNextHopEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.44.1		not-accessible	Set IP address of next hop. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetNextHopName	1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetNextHopSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
IP zxr10RMAPSetNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.3	IpAddress	not-accessible	IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
ROW zxr10RMAPSetNextHopRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetOriginTable	1.3.6.1.4.1.3902.3.6000.604.2.1.45		not-accessible	Route-map Set Origin Table
zxr10RMAPSetOriginEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.45.1		not-accessible	Set BGP origin code
STR zxr10RMAPSetOriginName	1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetOriginSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetOrigin	1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.3	RmapSetOrigin	read-create	egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
ROW zxr10RMAPSetOriginRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetQosIdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.46		not-accessible	Route-map Set QosId Table
zxr10RMAPSetQosIdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.46.1		not-accessible	Set QoS ID of routing
STR zxr10RMAPSetQosIdName	1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetQosIdSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetQosId	1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.3	Integer32	read-create	QoS ID. The range of config is 1 to 16000. 0 is invalid value.
ROW zxr10RMAPSetQosIdRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetVrfTable	1.3.6.1.4.1.3902.3.6000.604.2.1.47		not-accessible	Route-map Set Vrf Table
zxr10RMAPSetVrfEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1		not-accessible	Set virtual route forwarding name. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set global
STR zxr10RMAPSetVrfName	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetVrfSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetVrf	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.3	DisplayString	read-create	Virtual route forwarding name
IP zxr10RMAPSetVrfNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.4	IpAddress	read-create	IP address of next hop. 0 is invalid value. This attribut may be setted or not.
STR zxr10RMAPSetVrfSqa	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.5	DisplayString	read-create	Track name. This attribut may be setted or not.
RMA zxr10RMAPSetVrfIpConst	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.6	RmapSetVrfIpConst	read-create	If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 1.
RMA zxr10RMAPSetVrfNextHopConst	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.7	RmapSetVrfNextHopConst	read-create	If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 2.
ROW zxr10RMAPSetVrfRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchAsLenTable	1.3.6.1.4.1.3902.3.6000.604.2.1.48		not-accessible	Route-map Match As-path-length Table
zxr10RMAPMatchAsLenEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1		not-accessible	Match BGP as-path-length
STR zxr10RMAPMatchAsLenName	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchAsLenSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchAsLenAlg	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.3	RmapMatchAlg	read-create	eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
I32 zxr10RMAPMatchAsLen	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.4	Integer32	read-create	As-path length. The range of config is 0 to 255.
ROW zxr10RMAPMatchAsLenRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchAsUnqLenTable	1.3.6.1.4.1.3902.3.6000.604.2.1.49		not-accessible	Route-map Match As-path-unique-length Table
zxr10RMAPMatchAsUnqLenEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1		not-accessible	Match BGP as-path-unique-length
STR zxr10RMAPMatchAsUnqLenName	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchAsUnqLenSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchAsUnqLenAlg	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.3	RmapMatchAlg	read-create	eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
I32 zxr10RMAPMatchAsUnqLen	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.4	Integer32	read-create	As-path unique length. The range of config is 0 to 255.
ROW zxr10RMAPMatchAsUnqLenRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpSourceAclTable	1.3.6.1.4.1.3902.3.6000.604.2.1.50		not-accessible	Route-map Match IpSource Table(match ip source by acl).
zxr10RMAPMatchIpSourceAclEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1		not-accessible	Match source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by pfl. If zxr10RMAPsourceIsConfigAcl is true,it expresses that this config is match ip source by acl.
STR zxr10RMAPMatchSourceAclName	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchSourceAclSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSourceAclName	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ip source items at most.
T/F zxr10RMAPSourceIsConfigAcl	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.4	TruthValue	not-accessible	It expresses that this config is match ip source by acl.
ROW zxr10RMAPMatchSourceAclRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpSourcePflTable	1.3.6.1.4.1.3902.3.6000.604.2.1.51		not-accessible	Route-map Match IpSource Table(match ip source by pfl)
zxr10RMAPMatchIpSourcePflEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1		not-accessible	Match Source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by acl.
STR zxr10RMAPMatchSourcePflName	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchSourcePflSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSourcePflName	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.3	DisplayString	not-accessible	Name of a prefix list (1-31 characters). Each sequence has 10 match ip source items at most.
T/F zxr10RMAPSourceIsConfigPfl	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.4	TruthValue	not-accessible	It expresses that this config is match ip source by pfl.
ROW zxr10RMAPMatchSourcePflRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchLocalPrefTable	1.3.6.1.4.1.3902.3.6000.604.2.1.52		not-accessible	Route-map Match local-preference Table
zxr10RMAPMatchLocalPrefEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1		not-accessible	Match BGP local preference path attribute
STR zxr10RMAPMatchLocalPrefName	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchLocalPrefSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchLocalPrefAlg	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.3	RmapMatchAlg	read-create	eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
U32 zxr10RMAPMatchLocalPref	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.4	Unsigned32	read-create	Preference value. The range of config is 0 to 4294967295.
ROW zxr10RMAPMatchLocalPrefRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchOriginTable	1.3.6.1.4.1.3902.3.6000.604.2.1.53		not-accessible	Route-map Match Origin Table
zxr10RMAPMatchOriginEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.53.1		not-accessible	Match BGP origin code
STR zxr10RMAPMatchOriginName	1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchOriginSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchOrigin	1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.3	RmapSetOrigin	read-create	egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
ROW zxr10RMAPMatchOriginRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetPathSelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.54		not-accessible	Route-map Set Path-selection Table
zxr10RMAPSetPathSelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1		not-accessible	Set BGP path-selection
STR zxr10RMAPSetPathSelName	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetPathSelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetPathSelPath	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.3	RmapSetPath	read-create	all Path for imitating iBGP full-mesh.Value is 1. backup Path for rapid convergence.Value is 2. best-path Path for load sharing.Value is 3. group-best Path for elimination of routing oscillation.Value is 4.
I32 zxr10RMAPSetPathSelNum	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.4	Integer32	read-create	Path numbers. The range of config is 1 to 32.
RMA zxr10RMAPSetPathSelInstall	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.5	RmapSetPathInstall	read-create	Manner of sending to forwarding table.
RMA zxr10RMAPSetPathSelMulpro	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.6	RmapSetPathMulpro	read-create	Manner of sending to forwarding table.
RMA zxr10RMAPSetPathSelAdvertise	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.7	RmapSetPathAdvertise	read-create	Advertising the path selected outward.
ROW zxr10RMAPSetPathSelRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetPolicyPrioTable	1.3.6.1.4.1.3902.3.6000.604.2.1.55		not-accessible	Route-map Set Policy-priority Table
zxr10RMAPSetPolicyPrioEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.55.1		not-accessible	Set policy priority for PBR
STR zxr10RMAPSetPolicyPrioName	1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetPolicyPrioSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetPolicyPrio	1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.3	Integer32	read-create	Value of policy priority. The range of config is 0 to 7.
ROW zxr10RMAPSetPolicyPrioRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpAlgMetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.56		not-accessible	Route-map Match Ip Metric Table
zxr10RMAPMatchIpAlgMetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1		not-accessible	Match address of route or match packet. This match item sets the route-map with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
STR zxr10RMAPMatchIpAlgMetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchIpAlgMetricSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchIpAlgMetricAlg	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.3	RmapMatchAlg	read-create	eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
U32 zxr10RMAPMatchIpAlgMetric	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.4	Unsigned32	read-create	Metric value. The range of config is 0 to 4294967295.
ROW zxr10RMAPIpAlgMetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6AlgMetricTable	1.3.6.1.4.1.3902.3.6000.604.2.1.57		not-accessible	Route-map Match Ipv6 Metric Table
zxr10RMAPMatchIpv6AlgMetricEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1		not-accessible	Match address of route or match packet. This match item sets the route-map with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPMatchIpv6AlgMetricName	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPMatchIpv6AlgMetricSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPMatchIpv6AlgMetricAlg	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.3	RmapMatchAlg	read-create	eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
U32 zxr10RMAPMatchIpv6AlgMetric	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.4	Unsigned32	read-create	Metric value. The range of config is 0 to 4294967295.
ROW zxr10RMAPIpv6AlgMetricRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetTraffIdxTable	1.3.6.1.4.1.3902.3.6000.604.2.1.58		not-accessible	Route-map Set Traffic-index Table
zxr10RMAPSetTraffIdxEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.58.1		not-accessible	Set BGP traffic index
STR zxr10RMAPSetTraffIdxName	1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetTraffIdxSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetTraffIdx	1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.3	Integer32	read-create	Traffic-index number. The range of config is 1 to 63.
ROW zxr10RMAPSetTraffIdxRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchIpv6AddrPflTable	1.3.6.1.4.1.3902.3.6000.604.2.1.59		not-accessible	Route-map Match Ipv6Address pfl Table
zxr10RMAPMatchIpv6AddrPflEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1		not-accessible	Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
STR zxr10RMAPIpv6AddrPflName	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPIpv6AddrPflSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPIpv6AddrPfl	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.3	DisplayString	not-accessible	Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
T/F zxr10RMAPIpv6IsConfigPfl	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.4	TruthValue	not-accessible	It expresses that this config is match ipv6 address by pfl.
ROW zxr10RMAPIpv6AddrPflRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetNextHopPeerAddrTable	1.3.6.1.4.1.3902.3.6000.604.2.1.60		not-accessible	Route-map Set NextHop Table
zxr10RMAPSetNextHopPeerAddrEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1		not-accessible	Set IP address of next hop. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetNextHopPeerAddrName	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetNextHopPeerAddrSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
IP zxr10RMAPSetNextHopAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.3	IpAddress	not-accessible	IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
I32 zxr10RMAPSetNextHopPeerAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.4	Integer32	not-accessible	Peer address for BGP.
ROW zxr10RMAPSetNHorPeerAddRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetIpv6NHorPeerAddTable	1.3.6.1.4.1.3902.3.6000.604.2.1.61		not-accessible	Route-map Set IpNextHop Table
zxr10RMAPSetIpv6NHorPeerAddEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1		not-accessible	Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetIpv6NHorPeerAddName	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetIpv6NHorPeerAddSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
ADR zxr10RMAPSetIpv6NextHopAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.3	Ipv6Address	not-accessible	IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
I32 zxr10RMAPSetIpv6NextHopPeerAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.4	Integer32	not-accessible	Peer address for BGP.
ROW zxr10RMAPSetv6NHorPeerRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.100	RowStatus	read-create	RowStatus
zxr10RMAPMatchEvpnTable	1.3.6.1.4.1.3902.3.6000.604.2.1.62		not-accessible	Route-map match EVPN table
zxr10RMAPMatchEvpnEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.62.1		not-accessible	Match BGP EVPN route
STR zxr10RMAPMatchEvpnName	1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPMatchEvpnSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchEvpn	1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.3	Integer32	not-accessible	EVPN route type. 1: Ethernet Auto-Discovery (A-D) route; 2: MAC/IP Advertisement route; 3: Inclusive Multicast Ethernet Tag route; 4: Ethernet Segment route; 5: IP Prefix route.
ROW zxr10RMAPMatchEvpnRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.100	RowStatus	read-create	Row status
zxr10RMAPBlackHoleRouteTable	1.3.6.1.4.1.3902.3.6000.604.2.1.63		not-accessible	Route-map black hole route table
zxr10RMAPBlackHoleRouteEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.63.1		not-accessible	Black hole route which outcoming interface is null.
STR zxr10RMAPBlackHoleRouteName	1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPBlackHoleRouteSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
INT zxr10RMAPBlackHoleRouteEnable	1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.3	INTEGER	read-create	Black hole route enable.
ROW zxr10RMAPBlackHoleRouteRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.100	RowStatus	read-create	Row status
zxr10RMAPDefaultRouteTable	1.3.6.1.4.1.3902.3.6000.604.2.1.64		not-accessible	Route-map default route table
zxr10RMAPDefaultRouteEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.64.1		not-accessible	Default route
STR zxr10RMAPDefaultRouteName	1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPDefaultRouteSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
INT zxr10RMAPDefaultRouteEnable	1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.3	INTEGER	read-create	Default route enable.
ROW zxr10RMAPDefaultRouteRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.100	RowStatus	read-create	Row status
zxr10RMAPStrictPolicyTable	1.3.6.1.4.1.3902.3.6000.604.2.1.65		not-accessible	Route-map strict policy table
zxr10RMAPStrictPolicyEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.65.1		not-accessible	Strict policy
STR zxr10RMAPStrictPolicyName	1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPStrictPolicySequence	1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
INT zxr10RMAPStrictPolicyEnable	1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.3	INTEGER	read-create	Strict policy enable.
ROW zxr10RMAPStrictPolicyRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.100	RowStatus	read-create	Row status
zxr10RMAPSetPathListTable	1.3.6.1.4.1.3902.3.6000.604.2.1.66		not-accessible	Route-map set IPv4 path list table
zxr10RMAPSetPathListEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1		not-accessible	Set output interfaces. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with IPv4 type. It conflicts with other match or set items which set the route-map name with IPv6 type and zxr10RMAPSetIpPathListTable. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetPathListName	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetPathListSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetPathListIntf	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.3	DisplayString	not-accessible	Name of interface (1-31 characters)
IP zxr10RMAPSetPathListNextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.4	IpAddress	not-accessible	IP address of next hop.0 is invalid value.
ROW zxr10RMAPSetPathListRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.100	RowStatus	read-create	Row status
zxr10RMAPSetPathList6Table	1.3.6.1.4.1.3902.3.6000.604.2.1.67		not-accessible	Route-map set Ipv6 path list table
zxr10RMAPSetPathList6Entry	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1		not-accessible	Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type and zxr10RMAPSetIpv6PathTable. It conflicts with these set items below: set vrf set global
STR zxr10RMAPSetPathList6Name	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetPathList6Sequence	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetPathList6Intf	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.3	DisplayString	not-accessible	Name of interface (1-31 characters)
ADR zxr10RMAPSetPathList6NextHop	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.4	Ipv6Address	not-accessible	IPv6 address of next hop.0 is invalid value.
ROW zxr10RMAPSetPathList6RowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.100	RowStatus	read-create	Row status
zxr10RMAPSetVxlanTunnelSrcTable	1.3.6.1.4.1.3902.3.6000.604.2.1.68		not-accessible	Route-map set VXLAN tunnel source table
zxr10RMAPSetVxlanTunnelSrcEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.68.1		not-accessible	Route-map set VXLAN tunnel source entry
STR zxr10RMAPSetVxlanTunnelSrcName	1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetVxlanTunnelSrcSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
IP zxr10RMAPSetVxlanTunnelSrcAddr	1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.3	IpAddress	read-create	IP address of VXLAN tunnel source.
ROW zxr10RMAPVxlanTunnelSrcRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.100	RowStatus	read-create	Row status
zxr10RMAPSetEvpnMacIntfTable	1.3.6.1.4.1.3902.3.6000.604.2.1.69		not-accessible	Route-map set EVPN router's MAC interface table
zxr10RMAPSetEvpnMacIntfEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.69.1		not-accessible	Route-map set EVPN router's MAC interface entry
STR zxr10RMAPSetEvpnMacIntfName	1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetEvpnMacIntfSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPSetEvpnMacIntf	1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.3	DisplayString	read-create	Name of interface (1-31 characters)
ROW zxr10RMAPSetEvpnMacIntfRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.100	RowStatus	read-create	Row status
zxr10RMAPSetL2vniLabelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.70		not-accessible	Route-map set l2-vni label table
zxr10RMAPSetL2vniLabelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.70.1		not-accessible	Route-map set l2-vni label entry
STR zxr10RMAPSetL2vniLabelName	1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetL2vniLabelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetL2vniLabel	1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.3	Integer32	read-create	The value of l2-vni label.
ROW zxr10RMAPSetL2vniLabelRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.100	RowStatus	read-create	Row status
zxr10RMAPSetL3vniLabelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.71		not-accessible	Route-map set l3-vni label table
zxr10RMAPSetL3vniLabelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.71.1		not-accessible	Route-map set l3-vni label entry
STR zxr10RMAPSetL3vniLabelName	1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetL3vniLabelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetL3vniLabel	1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.3	Integer32	read-create	The value of l3-vni label.
ROW zxr10RMAPSetL3vniLabelRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.100	RowStatus	read-create	Row status
zxr10RMAPMatchL3VniLabelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.72		not-accessible	Route-map match l3-vni label table
zxr10RMAPMatchL3VniLabelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.72.1		not-accessible	Route-map match l3-vni label entry
STR zxr10RMAPMatchL3VniLabelName	1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPMatchL3VniLabelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchL3VniLabel	1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.3	Integer32	read-create	The value of l3-vni label.
ROW zxr10RMAPMatchL3VniLabelStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.100	RowStatus	read-create	Row status
zxr10RMAPMatchL2VniLabelTable	1.3.6.1.4.1.3902.3.6000.604.2.1.73		not-accessible	Route-map match l2-vni label table
zxr10RMAPMatchL2VniLabelEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.73.1		not-accessible	Route-map match l2-vni label entry
STR zxr10RMAPMatchL2VniLabelName	1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPMatchL2VniLabelSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchL2VniLabel	1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.3	Integer32	read-create	The value of l2-vni label.
ROW zxr10RMAPMatchL2VniLabelStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.100	RowStatus	read-create	Row status
zxr10RMAPMatchPlyRtIdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.74		not-accessible	Route-map match policy-route-id table
zxr10RMAPMatchPlyRtIdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1		not-accessible	Route-map match policy-route-id entry
STR zxr10RMAPMatchPlyRtIdName	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPMatchPlyRtIdSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchPlyRtId	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.3	Integer32	not-accessible	The value of policy-route-id.
INT zxr10RMAPMatchPlyRtIdDeriction	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.4	INTEGER	not-accessible	The deriction of policy-route-id.
ROW zxr10RMAPMatchPlyRtIdStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.100	RowStatus	read-create	Row status
zxr10RMAPMatchIpv6PlyRtIdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.75		not-accessible	Route-map match ipv6 policy-route-id table
zxr10RMAPMatchIpv6PlyRtIdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1		not-accessible	Route-map match ipv6 policy-route-id entry
STR zxr10RMAPMatchIpv6PlyRtIdName	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPMatchIpv6PlyRtIdSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPMatchIpv6PlyRtId	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.3	Integer32	not-accessible	The value of policy-route-id.
INT zxr10RMAPMatchIpv6PlyRtIdDerict	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.4	INTEGER	not-accessible	The deriction of policy-route-id.
ROW zxr10RMAPMatchIpv6PlyRtIdStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.100	RowStatus	read-create	Row status
zxr10RMAPSetPlyRtIdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.76		not-accessible	Route-map set policy-route-id table
zxr10RMAPSetPlyRtIdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.76.1		not-accessible	Route-map set policy-route-id entry
STR zxr10RMAPSetPlyRtIdName	1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetPlyRtIdSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetPlyRtId	1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.3	Integer32	read-create	The value of policy-route-id.
ROW zxr10RMAPSetPlyRtIdStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.100	RowStatus	read-create	Row status
zxr10RMAPSetMonitorGroupIdTable	1.3.6.1.4.1.3902.3.6000.604.2.1.77		not-accessible	Route-map set monitor-group-id table
zxr10RMAPSetMonitorGroupIdEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.77.1		not-accessible	Route-map set monitor-group-id entry
STR zxr10RMAPSetMonitorGroupIdName	1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPSetMonitorGroupIdSeq	1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPSetMonitorGroupId	1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.3	Integer32	read-create	The value of policy-route-id.
ROW zxr10RMAPSetMonitorGroupIdStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.100	RowStatus	read-create	Row status
zxr10RMAPLoadShareTable	1.3.6.1.4.1.3902.3.6000.604.2.1.78		not-accessible	Route-map load share table
zxr10RMAPLoadShareEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.78.1		not-accessible	Load share
STR zxr10RMAPLoadShareName	1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPLoadShareSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPLoadShareEnable	1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.3	Integer32	read-create	Load share enable.
ROW zxr10RMAPLoadShareStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.100	RowStatus	read-create	Row status
zxr10RMAPContinueTable	1.3.6.1.4.1.3902.3.6000.604.2.1.79		not-accessible	Route-map continue table
zxr10RMAPContinueEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1		not-accessible	Route-map continue entry
STR zxr10RMAPContinueName	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.1	DisplayString	not-accessible	Name of route-map (1-31 characters)
I32 zxr10RMAPContinueSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
I32 zxr10RMAPContinue	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.3	Integer32	read-create	The value of continue sequence.
I32 zxr10RMAPContinueNext	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.4	Integer32	read-create	Continue next.
ROW zxr10RMAPContinueStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.100	RowStatus	read-create	Row status
zxr10RMAPTimeRangeTable	1.3.6.1.4.1.3902.3.6000.604.2.1.80		not-accessible	Route-map Match IpNextHop Table
zxr10RMAPTimeRangeEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.80.1		not-accessible	Route-map time range.
STR zxr10RMAPTimeRangeName	1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPTimeRangeSequence	1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
STR zxr10RMAPTimeRange	1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.3	DisplayString	read-create	Name of time range(1-31 characters).
ROW zxr10RMAPTimeRangeStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.100	RowStatus	read-create	RowStatus
zxr10RMAPSetCommunityNameTable	1.3.6.1.4.1.3902.3.6000.604.2.1.81		not-accessible	Route-map Set Community Table
zxr10RMAPSetCommunityNameEntry	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1		not-accessible	Set BGP community name.
STR zxr10RMAPSetCommunityName	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.1	DisplayString	not-accessible	Name of Route-map (1-31 characters)
I32 zxr10RMAPSetCommunitySequence	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.2	Integer32	not-accessible	The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
RMA zxr10RMAPSetCommunityIsAddtive	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.3	RmapSetComm	not-accessible	additive Add to the existing community. Value is 5.
STR zxr10RMAPSetCommunityListName	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.4	DisplayString	not-accessible	Community list name (1-31 characters)
ROW zxr10RMAPSetCommunityRowStatus	1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.100	RowStatus	read-create	RowStatus
zxr10RMAPNotifications	1.3.6.1.4.1.3902.3.6000.604.3
zxr10RMAPConformance	1.3.6.1.4.1.3902.3.6000.604.4

RFC description

ZTE ZXR10 router platform MIB for route map policy management; vendor-private management of routing policies and traffic control rules.

Start monitoring ZTE ZXR10 router, BGP/routing policy (route-map sequence/match-condition config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-ROUTE-MAP-MIB

What Is ZXR10-ROUTE-MAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description