ZTE-AN-QOS-TRAFFIC-MIB

All MIBs › ZTE-AN-QOS-TRAFFIC-MIB

Organization: ZTE Corporation

Last Updated: 2011-09-22

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node QoS traffic statistics per queue and service class for SLA enforcement.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-QOS-TRAFFIC-MIB?

This is a ZTE vendor-specific MIB for the Access Node (AN) broadband access platform family, dedicated to Quality of Service (QoS) traffic management and monitoring. It exposes per-queue and per-service-class traffic statistics, such as transmitted/dropped packet and byte counts, that reflect how traffic is being scheduled and policed across priority queues. Its primary monitoring value is performance and SLA assurance: operators track queue-level drop counts and throughput to verify that voice, video, and data traffic classes are receiving their contracted bandwidth and that congestion is not silently degrading premium services. It is generally used alongside interface (IF-MIB) and DiffServ-style MIBs, since QoS queue statistics are most meaningful when correlated with overall port utilization. It is typically deployed by access network operators enforcing service-level agreements on ZTE access nodes serving residential or business broadband subscribers. Engineers can download the ZTE-AN-QOS-TRAFFIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-QOS-TRAFFIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access node (DSLAM/OLT/MSAP)

Monitoring Examples

An engineer polls per-queue traffic counters on a ZTE access node to confirm that a voice traffic class is not experiencing drops during peak evening hours when data traffic surges. Sudden increases in drop counts for a lower-priority queue would be expected under congestion, but drops appearing in the highest-priority queue would signal a QoS misconfiguration or oversubscription needing correction. No sample objects were present in the source extract, so exact table/object names cannot be confirmed here.

What Can Be Monitored

per-queue packet counters
per-queue drop counts
traffic class throughput
QoS policy compliance
port-level congestion indicators

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

Counter64
DisplayString
RowStatus

From ZTE-AN-IF-MIB

zxAnSubIfIndex

OBJECT-TYPE

From ZTE-AN-SMI

zxAnQos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnQosTrafficMib	1.3.6.1.4.1.3902.1082.50.2			This MIB defines ZTE Access Node QoS Traffic managed objects.
zxAnQosTrafficGlobalObjects	1.3.6.1.4.1.3902.1082.50.2.1
BIT zxAnQosTrafficCapabilities	1.3.6.1.4.1.3902.1082.50.2.1.1	Bits	read-only	The QoS traffic compatibility. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means not supporting zxAnQosTrafficPrfDiscardMode and zxAnQosTrafficPrfColorMode in zxAnQosTrafficPrfTable. bit 1: value 1 means supporting zxAnQosTrafficIfShapingConfTable. bit 2: value 1 means supporting zxAnQosTrafficPrfColorMode in zxAnQosTrafficPrfTable, regardless of notSupportDiscardAndColorMode. bit 3: value 1 means supporting zxAnQosTrafficPrfPolicerType and zxAnQosTrafficPrfCouplingEn in zxAnQosTrafficPrfTable. bit 4: value 1 means supporting zxAnQosTrafficIfShape2ConfTable. NOTE: No recommended to display it in NMS.
zxAnQosTrafficObjects	1.3.6.1.4.1.3902.1082.50.2.2
zxAnQosTrafficPrfTable	1.3.6.1.4.1.3902.1082.50.2.2.1		not-accessible	This table contains information about traffic controlling. An entry in this table reflects a profile defined which can be used to configure an interface.
zxAnQosTrafficPrfEntry	1.3.6.1.4.1.3902.1082.50.2.2.1.1		not-accessible	zxAnQosTrafficPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosTrafficPrfCir, zxAnQosTrafficPrfCbs, zxAnQosTrafficPrfPir, zxAnQosTrafficPrfPbs, zxAnQosTrafficPrfDiscardMode, zxAnQosTrafficPrfColorMode, zxAnQosTrafficPrfPolicerType, zxAnQosTrafficPrfCouplingEn, zxAnQosTrafficPrfRowStatus. optional : none. To delete an entry, only zxAnQosTrafficPrfRowStatus is needed in one SNMP setOperation. After an entry is created, variables zxAnQosTrafficPrfCir, zxAnQosTrafficPrfCbs, zxAnQosTrafficPrfPir, zxAnQosTrafficPrfPbs, zxAnQosTrafficPrfDiscardMode, zxAnQosTrafficPrfColorMode, zxAnQosTrafficPrfPolicerType and zxAnQosTrafficPrfCouplingEn can be modified alone. Make sure that zxAnQosTrafficPrfPir is not less than zxAnQosTrafficPrfCir, and zxAnQosTrafficPrfPbs is not less than zxAnQosTrafficPrfCbs when to create or modify an entry.
STR zxAnQosTrafficPrfName	1.3.6.1.4.1.3902.1082.50.2.2.1.1.1	DisplayString	not-accessible	Traffic profile name which can be applied to an interface.
INT zxAnQosTrafficPrfCir	1.3.6.1.4.1.3902.1082.50.2.2.1.1.2	INTEGER	read-create	Committed Information Rate(CIR) in kbps.
INT zxAnQosTrafficPrfCbs	1.3.6.1.4.1.3902.1082.50.2.2.1.1.3	INTEGER	read-create	Committed Burst Size(CBS) in kbytes.
INT zxAnQosTrafficPrfPir	1.3.6.1.4.1.3902.1082.50.2.2.1.1.4	INTEGER	read-create	Peak Information Rate(PIR) in kbps.
INT zxAnQosTrafficPrfPbs	1.3.6.1.4.1.3902.1082.50.2.2.1.1.5	INTEGER	read-create	Peak Burst Size(PBS) in kbyte.
INT zxAnQosTrafficPrfDiscardMode	1.3.6.1.4.1.3902.1082.50.2.2.1.1.6	INTEGER	read-create	The discard mode is used when the traffic exceeds the limit. noDistinction(1) -- discard extra flow equally. lowPriorityFirst(2) -- discard low priority flow firstly.
INT zxAnQosTrafficPrfColorMode	1.3.6.1.4.1.3902.1082.50.2.2.1.1.7	INTEGER	read-create	Color mode. aware(1) -- color aware mode. blind(2) -- color blind mode.
INT zxAnQosTrafficPrfPolicerType	1.3.6.1.4.1.3902.1082.50.2.2.1.1.8	INTEGER	read-create	Policer type.
INT zxAnQosTrafficPrfCouplingEn	1.3.6.1.4.1.3902.1082.50.2.2.1.1.9	INTEGER	read-create	Enables or disables the coupling enabling.
ROW zxAnQosTrafficPrfRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.1.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficIfConfTable	1.3.6.1.4.1.3902.1082.50.2.2.2		not-accessible	This table contains interface's traffic configuration.
zxAnQosTrafficIfConfEntry	1.3.6.1.4.1.3902.1082.50.2.2.2.1		not-accessible	This table contains QoS traffic configuration parameters for gpon olt interface and gpon onu interface. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are different for certain interface. For gpon olt interface, the mandatory and optional variables are as follows: mandatory: zxAnQosTrafficIfConfPrf, zxAnQosTrafficIfRowStatus optional : none. For gpon onu interface, the mandatory and optional variables are as follows: mandatory: zxAnQosTrafficIfConfPrf, zxAnQosTrafficIfRowStatus To delete an entry, only zxAnQosTrafficPrfRowStatus is needed in one SNMP setOperation. After an entry is created, certain variable can be modified. For gpon olt interface, only variable zxAnQosTrafficIfConfPrf can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
INT zxAnQosTrafficIfDirection	1.3.6.1.4.1.3902.1082.50.2.2.2.1.1	INTEGER	not-accessible	Egress direction or ingress direction on an interface.
STR zxAnQosTrafficIfConfPrf	1.3.6.1.4.1.3902.1082.50.2.2.2.1.2	DisplayString	read-create	This object configures traffic profile of ingress or egress direction. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.
ROW zxAnQosTrafficIfRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficIfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficIfQueueConfTable	1.3.6.1.4.1.3902.1082.50.2.2.4		not-accessible	Traffic configuration based on the queue of the interface table.
zxAnQosTrafficIfQueueConfEntry	1.3.6.1.4.1.3902.1082.50.2.2.4.1		not-accessible	Traffic configuration based on the queue of the interface entry.
I32 zxAnQosTrafficIfQueueId	1.3.6.1.4.1.3902.1082.50.2.2.4.1.1	Integer32	not-accessible	Queue ID. The number of queues is fixed to zxAnQosGlobalMaxQueues in ZTE-AN-QOS-MIB.mib.
INT zxAnQosTrafficIfQueueDirection	1.3.6.1.4.1.3902.1082.50.2.2.4.1.2	INTEGER	not-accessible	The direction of the queue.
STR zxAnQosTrafficIfQueueConfPrf	1.3.6.1.4.1.3902.1082.50.2.2.4.1.3	DisplayString	read-create	Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.
ROW zxAnQosTrafficIfQueueRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.4.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficIfQueueConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficIfShape2ConfTable	1.3.6.1.4.1.3902.1082.50.2.2.6		not-accessible	Egress or ingress traffic shaping configuration based on the interface table.
zxAnQosTrafficIfShape2ConfEntry	1.3.6.1.4.1.3902.1082.50.2.2.6.1		not-accessible	Egress or ingress traffic shaping configuration based on the interface entry. This table contains QoS traffic configuration parameters for physical interfaces (including ethernet interfaces and GPON OLT interfaces) and GPON ONU interfaces.
INT zxAnQosTrafficIfShape2Direction	1.3.6.1.4.1.3902.1082.50.2.2.6.1.1	INTEGER	not-accessible	The direction of the interface.
STR zxAnQosTrafficIfShape2ConfPrf	1.3.6.1.4.1.3902.1082.50.2.2.6.1.2	DisplayString	read-create	Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.
ROW zxAnQosTrafficIfShape2RowStatus	1.3.6.1.4.1.3902.1082.50.2.2.6.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficIfShapingConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficFlowObjects	1.3.6.1.4.1.3902.1082.50.2.2.20
zxAnQosTrafficFlowPrfTable	1.3.6.1.4.1.3902.1082.50.2.2.20.2		not-accessible	Traffic flow profile table.
zxAnQosTrafficFlowPrfEntry	1.3.6.1.4.1.3902.1082.50.2.2.20.2.1		not-accessible	Traffic flow profile entry.
STR zxAnQosTrafficFlowPrfName	1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.1	DisplayString	not-accessible	Traffic flow profile name.
INT zxAnQosTrafficFlowPrfMode	1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.2	INTEGER	read-create	Traffic flow profile mode. cos(1): Rate is limited with CoS. any(2): Rate is limited without CoS.
ROW zxAnQosTrafficFlowPrfRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficFlowPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficFlowRulePrfTable	1.3.6.1.4.1.3902.1082.50.2.2.20.3		not-accessible	Traffic flow rule of the profile table.
zxAnQosTrafficFlowRulePrfEntry	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1		not-accessible	Traffic flow rule of the profile entry.
I32 zxAnQosTrafficFlowRuleId	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.1	Integer32	not-accessible	Flow rule ID of the profile.
OCT zxAnQosTrafficFlowRuleCosList	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.2	OCTET STRING	read-create	CoS list. \| bit 0 \| bit 1 \| ... bit 7 \| +----------+----------+----...-----------+ \| CoS 0 \| CoS 1 \| ... CoS 7 \| +----------+----------+----...-----------+ If one bit is set to '1', the corresponding CoS is configured to CoS list. If zxAnQosTrafficFlowPrfMode is any, this parameter must be all zero. If zxAnQosTrafficFlowPrfMode is cos, this parameter must be configured. A cos value can be set only once in the same profile.
STR zxAnQosTrafficFlowRuleTrafficPrf	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.3	DisplayString	read-create	Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable. An empty string means not configured.
INT zxAnQosTrafficFlowRuleCarThresh	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.4	INTEGER	read-create	CAR (Commit Access Rate) threshold. The flow can take x% of the tokens from the token bucket at most. When the number of the tokens taken from the token bucket exceeds x%, the flow is forbidden to take any tokens. For example, percent100 means the flow can take tokens once the token buket is not empty.
ROW zxAnQosTrafficFlowRuleRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in ZxAnQosTrafficFlowRulePrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficFlowIfGrpConfTable	1.3.6.1.4.1.3902.1082.50.2.2.20.4		not-accessible	Traffic flow interface group configuration information table for ethernet interface.
zxAnQosTrafficFlowIfGrpConfEntry	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1		not-accessible	Traffic flow interface group configuration information entry.
I32 zxAnQosTrafficFlowIfGrpId	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.1	Integer32	not-accessible	Traffic flow group ID.
INT zxAnQosTrafficFlowIfGrpDirection	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.2	INTEGER	not-accessible	Traffic flow direction.
STR zxAnQosTrafficFlowIfGrpFlowPrf	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.3	DisplayString	read-create	Traffic flow configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficFlowPrfTable.
OCT zxAnQosTrafficFlowIfGrpSvlanList	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.4	OCTET STRING	read-create	Traffic flow SVLAN list. The OCTET STRING contains pairs of values in the following structure: Octets 0-1 -- VLAN ID. Octets 2-3 -- VLAN ID. ... Octets 6-7 -- VLAN ID.
OCT zxAnQosTrafficFlowIfGrpCvlanList	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.5	OCTET STRING	read-create	Traffic flow CVLAN list. The OCTET STRING contains pairs of values in the following structure: Octets 0-1 -- VLAN ID. Octets 2-3 -- VLAN ID. ... Octets 6-7 -- VLAN ID.
STR zxAnQosTrafficFlowIfGrpTrffcPrf	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.6	DisplayString	read-create	Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable. An empty string means not configured.
INT zxAnQosTrafficFlowIfGrpMode	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.7	INTEGER	read-create	Traffic flow group mode. fullMatch(1): A SVLAN+CVLAN+CoSs is mapping to a rule. oneToOne(2): A SVLAN+CVLAN is mapping to a rule.
ROW zxAnQosTrafficFlowIfGrpRowStatus	1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosTrafficFlowIfGrpConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnQosTrafficConformance	1.3.6.1.4.1.3902.1082.50.2.4
zxAnQosTrafficCompliances	1.3.6.1.4.1.3902.1082.50.2.4.1
zxAnQosTrafficCompliance	1.3.6.1.4.1.3902.1082.50.2.4.1.1			The compliance statement for entities which implement the ZTE-AN-QOS-TRAFFIC-MIB.
zxAnQosTrafficGroups	1.3.6.1.4.1.3902.1082.50.2.4.2
zxAnQosTrafficPrfGroup	1.3.6.1.4.1.3902.1082.50.2.4.2.1			A collection of objects creating, modifying or deleting a trafficPrf.
zxAnQosTrafficIfConfGroup	1.3.6.1.4.1.3902.1082.50.2.4.2.2			A collection of objects configuring a trafficprf for an interface. For gpon olt and gpon onu interface, variable zxAnQosTrafficIfConfPrf and zxAnQosTrafficIfRowStatus can be configured.
zxAnQosTrafficIfStatsGroup	1.3.6.1.4.1.3902.1082.50.2.4.2.3			A collection of total CIR for an interface.

RFC description

ZTE Access Node QoS traffic MIB for traffic profile, shaping, and queue configuration.

Start monitoring ZTE access node (DSLAM/OLT/MSAP) (per-queue/per-service-class transmitted/dropped traffic-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-QOS-TRAFFIC-MIB

What Is ZTE-AN-QOS-TRAFFIC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description