ZXR10-RADIUS-MIB

MIB Reference — IPNetwork Monitor · Updated September 09, 2026

All MIBsZXR10-RADIUS-MIB

Organization: ZTE Corporation

Last Updated: 2018-03-02

Category: ZTE ZXR10 Security and Access Control

Description: Manages ZTE ZXR10 RADIUS authentication and accounting server configuration, retry settings, and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-RADIUS-MIB?

ZXR10-RADIUS-MIB is a ZTE private module (used on M6000/ZXR10 platforms) that manages configuration of RADIUS authentication and accounting servers, including server addresses, retry counts, timeouts, and related statistics. It exposes configuration data for RADIUS server profiles alongside operational statistics such as request/response or retry counters. Its monitoring use is primarily around the software status of the AAA subsystem, letting an operator confirm RADIUS servers are reachable and responding, and detect rising retry/failure counts that indicate authentication or accounting outages affecting user access. It depends conceptually on the IETF RADIUS protocol standards (RFC 2865/2866) though implemented as a ZTE private management model rather than referencing a standard RADIUS MIB. It is deployed on ZXR10/M6000 routers acting as network access servers or edge routers performing AAA for subscriber or administrative access. Engineers can download the ZXR10-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • ZTE ZXR10/M6000 router (AAA/network access server)

Monitoring Examples

No sample runtime objects were provided for this module, so exact object names cannot be cited; conceptually, an operator would poll RADIUS server configuration and per-server statistics such as retry or timeout counters to confirm authentication requests are succeeding. A spike in retry counts or timeouts for a given RADIUS server would indicate that server is unreachable or overloaded, risking failed subscriber logins.

What Can Be Monitored

  • RADIUS server configuration
  • authentication retry/timeout counters
  • accounting statistics
  • server reachability status
Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From ZXR10-SMI

zxr10OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxr10RadiusStatAuthAccessRequest OID:

Select a ZTE ZXR10/M6000 router, AAA/network access server (RADIUS server-reachability/retry-counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10RadiusStatAuthAccessRequest into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of RADIUS Access-Request packets sent to this server.This does not include retransmissions. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Manages RADIUS authentication and accounting configuration for ZTE M6000 platform. Provides objects for NAS port ID formatting and server authentication settings.

Start monitoring ZTE ZXR10/M6000 router, AAA/network access server (RADIUS server-reachability/retry-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-RADIUS-MIB