ZTE-AN-SPAN-MIB

All MIBs › ZTE-AN-SPAN-MIB

Organization: ZTE Corporation

Last Updated: 2012-12-10

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node SPAN (Switched Port Analyzer) port mirroring sessions for traffic capture.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-SPAN-MIB?

ZTE-AN-SPAN-MIB is a ZTE proprietary MIB for their Access Node (AN) product line that manages SPAN (Switched Port Analyzer) port-mirroring sessions, allowing a source port's traffic to be duplicated to a destination monitor port for capture and analysis. Its data is primarily configuration-oriented, covering the creation, source/destination port assignment, and direction (ingress/egress/both) of mirroring sessions. It is used less for classic hardware health monitoring and more for traffic-analysis workflows, though session state (active/inactive) can serve as a functional health check. No dependency on other standard MIBs is indicated in the available context, consistent with a self-contained vendor extension. It is typically deployed in ZTE access-network equipment where operators need to capture traffic for diagnostics, security monitoring, or troubleshooting subscriber-facing ports. Engineers can download the ZTE-AN-SPAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-SPAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Access Node (AN) equipment

Monitoring Examples

No sample object names were provided for this MIB, so specific table names cannot be honestly cited; based on its description it would expose a mirror-session table with source port, destination (monitor) port, and direction/status columns. An administrator would typically poll the session status object to confirm a diagnostic port-mirroring session remains active while capturing traffic for troubleshooting.

Imported Objects

From IF-MIB

InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

From ZTE-AN-IF-MIB

zxAnSubIfIndex

OBJECT-TYPE

From ZTE-AN-SMI

zxAnOam

OBJECT-IDENTITY

From ZTE-AN-TC-MIB

ZxAnSubIfIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnSpanMib	1.3.6.1.4.1.3902.1082.80.10			This MIB defines managed objects of ZTE SPAN.
zxAnSpanGlobalObjects	1.3.6.1.4.1.3902.1082.80.10.1
BIT zxAnSpanCapabilities	1.3.6.1.4.1.3902.1082.80.10.1.1	Bits	read-only	The management capabilities of SPAN. spanDstSubIndex(0): value 1 means supporting zxAnSpanDstSubIfIndex. spanSpanCpuPktMirror(1): value 1 means NOT supporting zxAnSpanCpuPktMirrorEnable and zxAnSpanCpuPktMirrorDirection. spanSrcIfIndex(2): value 1 means supporting zxAnSpanSrcIfIndex1, zxAnSpanSrcSubIfIndex1, zxAnSpanSrcIfIndex2, zxAnSpanSrcSubIfIndex2, zxAnSpanSrcIfIndex3, zxAnSpanSrcSubIfIndex3, zxAnSpanSrcIfIndex4, zxAnSpanSrcSubIfIndex4 and zxAnSpanSrcDirection, not supporting zxAnSpanSrcPortList and zxAnSpanSrcDirectionList. spanEncapsulateType(3): value 1 means supporting zxAnSpanEncapsulateType. spanTimeRangeName(4): value 1 means supporting zxAnSpanTimeRangeName. NOTE: No recommended to display it in NMS.
zxAnSpanObjects	1.3.6.1.4.1.3902.1082.80.10.2
zxAnSpanTable	1.3.6.1.4.1.3902.1082.80.10.2.2		not-accessible	This table represents the switched port analyzer related parameters.
zxAnSpanEntry	1.3.6.1.4.1.3902.1082.80.10.2.2.1		not-accessible	An entry in zxAnSpanTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry of this table, the mandatory and optional variables are as below. mandatory: zxAnSpanSessionId optional : the other After an entry is created, every variable can be modified.
I32 zxAnSpanSessionId	1.3.6.1.4.1.3902.1082.80.10.2.2.1.1	Integer32	not-accessible	The index of a session.
INT zxAnSpanType	1.3.6.1.4.1.3902.1082.80.10.2.2.1.2	INTEGER	read-create	The SPAN type of a session. span(1) - Local Switched Port Analyzer. rspan(2) - Remote SPAN. erspan(3) - Enhanced Remoted SPAN. unknown(255) - Unknown. this value is read-only and can not be set to NE.
INT zxAnSpanCpuPktMirrorEnable	1.3.6.1.4.1.3902.1082.80.10.2.2.1.3	INTEGER	read-create	This object indicates whether the packets sent to the CPU are mirrored: enabled(1) - the packets sent to the CPU are mirrored. disabled(2) - the packets sent to the CPU are not mirrored.
INT zxAnSpanCpuPktMirrorDirection	1.3.6.1.4.1.3902.1082.80.10.2.2.1.4	INTEGER	read-create	The direction of cpu packet.
OID zxAnSpanSrcPortList	1.3.6.1.4.1.3902.1082.80.10.2.2.1.5	OBJECT IDENTIFIER	read-create	It is a sequence of some source ports. Supports ethernet interface, inner port, smartgroup. The format of portlist is like this: .ifIndex1.zxAnSubIfIndex1.ifIndex2.zxAnSubIfIndex2... \| port1 \| port2 \|... In case of no zxAnSubIfIndex, the portlist is like this: .ifIndex1.0.ifIndex2.0... \|port1 \|port2 \|...
OID zxAnSpanSrcDirectionList	1.3.6.1.4.1.3902.1082.80.10.2.2.1.6	OBJECT IDENTIFIER	read-create	The traffic direction list of the source port list. The format of direction list is like this: .direction1.direction2... \|port1 \|port2 \|... Each value of the sequence represents a traffic direction. The value may be followings: both(1), egress(2), ingress(3).
NUM zxAnSpanSrcIfIndex1	1.3.6.1.4.1.3902.1082.80.10.2.2.1.7	InterfaceIndexOrZero	read-create	The interface index of the first source port.
ZXA zxAnSpanSrcSubIfIndex1	1.3.6.1.4.1.3902.1082.80.10.2.2.1.8	ZxAnSubIfIndex	read-create	The sub-interface index of the first source port.
NUM zxAnSpanSrcIfIndex2	1.3.6.1.4.1.3902.1082.80.10.2.2.1.9	InterfaceIndexOrZero	read-create	The interface index of the seoond source port.
ZXA zxAnSpanSrcSubIfIndex2	1.3.6.1.4.1.3902.1082.80.10.2.2.1.10	ZxAnSubIfIndex	read-create	The sub-interface index of the second source port.
NUM zxAnSpanSrcIfIndex3	1.3.6.1.4.1.3902.1082.80.10.2.2.1.11	InterfaceIndexOrZero	read-create	The interface index of the third source port.
ZXA zxAnSpanSrcSubIfIndex3	1.3.6.1.4.1.3902.1082.80.10.2.2.1.12	ZxAnSubIfIndex	read-create	The sub-interface index of the third source port.
NUM zxAnSpanSrcIfIndex4	1.3.6.1.4.1.3902.1082.80.10.2.2.1.13	InterfaceIndexOrZero	read-create	The interface index of the fourth source port.
ZXA zxAnSpanSrcSubIfIndex4	1.3.6.1.4.1.3902.1082.80.10.2.2.1.14	ZxAnSubIfIndex	read-create	The sub-interface index of the fourth source port.
INT zxAnSpanSrcDirection	1.3.6.1.4.1.3902.1082.80.10.2.2.1.15	INTEGER	read-create	The traffic direction of the source ports.
I32 zxAnSpanDstPort	1.3.6.1.4.1.3902.1082.80.10.2.2.1.20	Integer32	read-create	The ifIndex of SPAN and RSPAN destination port. Supports ethernet interface and smartgroup.
I32 zxAnSpanVid	1.3.6.1.4.1.3902.1082.80.10.2.2.1.21	Integer32	read-create	The traffic VLAN ID of RSPAN or ERSPAN.
I32 zxAnSpanCos	1.3.6.1.4.1.3902.1082.80.10.2.2.1.22	Integer32	read-create	The traffic CoS of RSPAN or ERSPAN.
I32 zxAnSpanTpid	1.3.6.1.4.1.3902.1082.80.10.2.2.1.23	Integer32	read-create	The traffic TPID of RSPAN or ERSPAN.
IPt zxAnSpanDstIpType	1.3.6.1.4.1.3902.1082.80.10.2.2.1.24	InetAddressType	read-create	The type of IP address about destination IP.
IP zxAnSpanDstIpAddr	1.3.6.1.4.1.3902.1082.80.10.2.2.1.25	InetAddress	read-create	The destination IP of ERSPAN.
IPt zxAnSpanSrcIpType	1.3.6.1.4.1.3902.1082.80.10.2.2.1.26	InetAddressType	read-create	The type of IP address about source IP.
IP zxAnSpanSrcIpAddr	1.3.6.1.4.1.3902.1082.80.10.2.2.1.27	InetAddress	read-create	The source IP of ERSPAN.
I32 zxAnSpanTtl	1.3.6.1.4.1.3902.1082.80.10.2.2.1.28	Integer32	read-create	The TTL of ERSPAN.
I32 zxAnSpanDscp	1.3.6.1.4.1.3902.1082.80.10.2.2.1.29	Integer32	read-create	The DSCP of ERSPAN.
MAC zxAnSpanDstMac	1.3.6.1.4.1.3902.1082.80.10.2.2.1.30	MacAddress	read-only	The destination MAC address of ERSPAN.
MAC zxAnSpanSrcMac	1.3.6.1.4.1.3902.1082.80.10.2.2.1.31	MacAddress	read-only	The source MAC address of ERSPAN.
ZXA zxAnSpanDstSubIfIndex	1.3.6.1.4.1.3902.1082.80.10.2.2.1.32	ZxAnSubIfIndex	read-create	The sub-interface index of destination port.
INT zxAnSpanEncapsulateType	1.3.6.1.4.1.3902.1082.80.10.2.2.1.33	INTEGER	read-create	The encapsulation type of ERSPAN. gre(1): Generic routing encapsulation(GRE). udp(2): UDP encapsulation.
STR zxAnSpanTimeRangeName	1.3.6.1.4.1.3902.1082.80.10.2.2.1.34	DisplayString	read-create	Name of the time range. Empty string means all the time the session is valid.
ROW zxAnSpanRowStatus	1.3.6.1.4.1.3902.1082.80.10.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnAclEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnSpanNotifications	1.3.6.1.4.1.3902.1082.80.10.3
zxAnSpanConformance	1.3.6.1.4.1.3902.1082.80.10.4
zxAnSpanCompliances	1.3.6.1.4.1.3902.1082.80.10.4.1
zxAnSpanCompliance	1.3.6.1.4.1.3902.1082.80.10.4.1.1			The compliance statement for the ZTE-AN-MONITOR-MIB.
zxAnSpanGroups	1.3.6.1.4.1.3902.1082.80.10.4.2
zxAnSpanGroup	1.3.6.1.4.1.3902.1082.80.10.4.2.1			A collection of objects providing the access control list configuration information.

RFC description

Manages Switched Port Analyzer (SPAN) configuration for traffic mirroring on ZTE access network devices; vendor-private.

Start monitoring ZTE Access Node (AN) equipment (port-mirroring session source/destination config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-SPAN-MIB

What Is ZTE-AN-SPAN-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description