All MIBs › ZXR10-RACK-MIB
Organization: ZTE Corporation
Last Updated: 2016-09-02
Category: ZTE ZXR10 System Management
Description: Monitors ZTE ZXR10 chassis rack configuration, slot occupancy, card presence, and physical inventory.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-RACK-MIB?
ZXR10-RACK-MIB is a ZTE proprietary MIB for the ZXR10 T8000 chassis-based switch/router platform, defining objects for physical chassis (shelf) inventory, slot occupancy, card presence, and shelf-level status. Its data falls into the hardware inventory/status and configuration categories, describing the physical makeup of a modular chassis rather than traffic or protocol behavior. This makes it directly useful for monitoring hardware status: detecting whether a shelf or card slot is present and available, which shelf is acting as master/standby in a redundant chassis, and tracking installation location and naming for physical asset management. It is a self-contained vendor MIB without an apparent dependency on external IETF entity/chassis MIBs, though it serves a role similar to the standard ENTITY-MIB's physical inventory concept. It is typically deployed on large modular ZXR10 chassis systems in core/aggregation network sites where slot and shelf redundancy must be tracked, and administrators can download the ZXR10-RACK-MIB file to load it into their MIB browser for chassis inventory monitoring.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-RACK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 T8000 chassis switch/router
Monitoring Examples
An admin would poll zxr10ShelfTable/zxr10ShelfEntry, indexed by zxr10ShelfNo, to check zxr10ShelfAvailStatus and zxr10ShelfMasterStatus for each shelf, confirming that the expected shelf is active as master and that no shelf has dropped to an unavailable state. Fields like zxr10ShelfSlotNumber, zxr10ShelfType, and zxr10ShelfName let an operator correlate a reported hardware fault with a specific physical slot and card type, while zxr10ShelfTimeStamp indicates when the shelf's status was last updated. A shelf unexpectedly reporting a non-master status when it should be primary would flag a chassis redundancy failover event worth investigating.
What Can Be Monitored
- shelf/slot availability status
- shelf master/standby status
- slot number and card type
- shelf name and physical location
- shelf status timestamp
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DisplayString |
From ZXR10-PROJECT-MIB
| BoardType | |
| SPboardType | |
| ShelfType | |
| SubBoardType | |
| zxUPN | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxr10RackMIB | 1.3.6.1.4.1.3902.3.6002.1 | ZXR10 T8000 ZXR10-RACK-MIB | ||
| INT zxr10RackNo | 1.3.6.1.4.1.3902.3.6002.1.1 | INTEGER | read-only | the No. of the special rack. |
| zxr10ShelfTable | 1.3.6.1.4.1.3902.3.6002.1.2 | not-accessible | the description of zxr10 shelf information, it is a list of shelf entries. | |
| zxr10ShelfEntry | 1.3.6.1.4.1.3902.3.6002.1.2.1 | not-accessible | A shelf entry containing objects that descript the shelf information,such as: zxr10ShelfNo ,zxr10ShelfAttrib,zxr10ShelfAvailStatus. | |
| INT zxr10ShelfNo | 1.3.6.1.4.1.3902.3.6002.1.2.1.1 | INTEGER | read-only | the No. of the special shelf. |
| SHE zxr10ShelfAttrib | 1.3.6.1.4.1.3902.3.6002.1.2.1.2 | ShelfAttrib | read-only | the attribute. of the special shelf. eg, if the current shelf is the Central Fabric Chassis in a cluster, we use 0. Else if the shelf is the Line Card Chassis in a cluster or in a no-cluster, we use 1. |
| SHE zxr10ShelfType | 1.3.6.1.4.1.3902.3.6002.1.2.1.3 | ShelfType | read-only | the type. of the special shelf. eg,the shelf is M6000-16,we use 0, the shelf is M6000-8,we use 1, the shelf is T8000,we use 8, the shelf is T8000-8,we use 9, the shelf is M6000-16E, we use 16777216, the shelf is M6000-8E, we use 16777217. |
| INT zxr10ShelfSlotNumber | 1.3.6.1.4.1.3902.3.6002.1.2.1.4 | INTEGER | read-only | the slot number of the special shelf. eg,the slot number of M6000-16 and T8000-16 and M6000-16E is 23, the slot number of M6000-8 and T8000-08 and M6000-8E is 14. |
| AVA zxr10ShelfAvailStatus | 1.3.6.1.4.1.3902.3.6002.1.2.1.5 | AvailStatus | read-only | the status. of the special shelf. eg ,the current shelf is in use, we use 1,else if the shelf is unuse, we use 0 . |
| MAS zxr10ShelfMasterStatus | 1.3.6.1.4.1.3902.3.6002.1.2.1.6 | MasterStatus | read-only | the master status. of the special shelf. eg,the current shelf is master,we use 0, else if the shelf is slave, we use 1, else, we use 2. |
| TIK zxr10ShelfTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.2.1.7 | TimeTicks | read-only | the time of the special shelf changed lastly. |
| STR zxr10ShelfName | 1.3.6.1.4.1.3902.3.6002.1.2.1.8 | DisplayString | read-only | we don't use ShelfName to descript Shelf in any equipment, so the Shelf Name is empty. |
| I32 zxr10ShelfService | 1.3.6.1.4.1.3902.3.6002.1.2.1.9 | Integer32 | read-only | the server of the special shelf. eg, we use 78. Only the equipment supported cluster use this node. |
| STR zxr10ShelfLocation | 1.3.6.1.4.1.3902.3.6002.1.2.1.10 | DisplayString | read-only | the location of the special shelf. eg, we use SysLocation. Only the equipment supported cluster use this node. |
| INT zxr10ShelfMPUFNum | 1.3.6.1.4.1.3902.3.6002.1.2.1.11 | INTEGER | read-only | the Main Processing Unit of the special shelf. Only the equipment supported cluster use this node. |
| INT zxr10ShelfPFUNum | 1.3.6.1.4.1.3902.3.6002.1.2.1.12 | INTEGER | read-only | the Packet Forwarding Unit of the special shelf. Only the equipment supported cluster use this node. |
| INT zxr10ShelfPIUNum | 1.3.6.1.4.1.3902.3.6002.1.2.1.13 | INTEGER | read-only | the Physical line Interface Unit of the special shelf. Only the equipment supported cluster use this node. |
| INT zxr10ShelfSFUNum | 1.3.6.1.4.1.3902.3.6002.1.2.1.14 | INTEGER | read-only | the Switch Fabric Unit of the special shelf. Only the equipment supported cluster use this node. |
| INT zxr10ShelfCESUNum | 1.3.6.1.4.1.3902.3.6002.1.2.1.15 | INTEGER | read-only | the Central Ethernet Switch Unit of the special shelf. Only the equipment supported cluster use this node. |
| STR zxr10ShelfPartNumber | 1.3.6.1.4.1.3902.3.6002.1.2.1.16 | DisplayString | read-only | the part number of the special shelf. |
| STR zxr10ShelfManufactureDate | 1.3.6.1.4.1.3902.3.6002.1.2.1.17 | DisplayString | read-only | the manufacture date of the special shelf. |
| STR zxr10ShelfSerialNumber | 1.3.6.1.4.1.3902.3.6002.1.2.1.18 | DisplayString | read-only | the serial number of the special shelf. |
| INT zxr10ShelfFiberLength | 1.3.6.1.4.1.3902.3.6002.1.2.1.19 | INTEGER | read-only | the fiber length of the shelf. Only the equipment supported cluster use this node. |
| zxr10SlotBoardTable | 1.3.6.1.4.1.3902.3.6002.1.3 | not-accessible | the description of zxr10 card information, it is a list of card entries. | |
| zxr10SlotBoardEntry | 1.3.6.1.4.1.3902.3.6002.1.3.1 | not-accessible | A card entry containing objects that descript the card information,such as: zxr10SlotNo,zxr10SlotBoardType, zxr10SlotSubboardNumber,zxr10SlotPortNumber, zxr10SlotAvailStatus,etc. | |
| INT zxr10SlotNo | 1.3.6.1.4.1.3902.3.6002.1.3.1.1 | INTEGER | read-only | the No. of the slot where the special card is inserted. |
| BOA zxr10SlotBoardType | 1.3.6.1.4.1.3902.3.6002.1.3.1.2 | BoardType | read-only | the type of the card. |
| INT zxr10SlotSubboardNumber | 1.3.6.1.4.1.3902.3.6002.1.3.1.3 | INTEGER | read-only | It describes how many sub slots which can load the sub card in the board. |
| INT zxr10SlotONSubboardNumber | 1.3.6.1.4.1.3902.3.6002.1.3.1.4 | INTEGER | read-only | the number of online subboard in the special card. |
| INT zxr10SlotPortNumber | 1.3.6.1.4.1.3902.3.6002.1.3.1.5 | INTEGER | read-only | It describes how many ports are in the card. |
| MAS zxr10SlotMasterStatus | 1.3.6.1.4.1.3902.3.6002.1.3.1.6 | MasterStatus | read-only | as for board MPU, master indicates MSC, slave indicates SSC, none indicates no SC. for PFU, SFU and other boards, only one status : master status |
| ONL zxr10SlotOperStatus | 1.3.6.1.4.1.3902.3.6002.1.3.1.7 | OnlineStatus | read-only | the operstatus. of the special card. eg ,the current card can work, we use 1, else if the card can't,we use 0. |
| AVA zxr10SlotAvailStatus | 1.3.6.1.4.1.3902.3.6002.1.3.1.8 | AvailStatus | read-only | the status. of the special card. eg ,the current card is running, we use 1,else if the card is down, we use 0 . |
| TIK zxr10SlotCpuUpTime | 1.3.6.1.4.1.3902.3.6002.1.3.1.9 | TimeTicks | read-only | the cpu running time of the special card. |
| TIK zxr10SlotReceiveTick | 1.3.6.1.4.1.3902.3.6002.1.3.1.10 | TimeTicks | read-only | the last ticks of receiving the board information. |
| STR zxr10SlotELElable | 1.3.6.1.4.1.3902.3.6002.1.3.1.11 | DisplayString | read-only | It describes the electric lable of the special card. |
| POW zxr10SlotPowerVoltageStatus | 1.3.6.1.4.1.3902.3.6002.1.3.1.12 | PowerStatus | read-only | the power voltage status of the special card. |
| STR zxr10SlotBootVer | 1.3.6.1.4.1.3902.3.6002.1.3.1.13 | DisplayString | read-only | It describes the bootrom version in the board. |
| STR zxr10SlotSystemVer | 1.3.6.1.4.1.3902.3.6002.1.3.1.14 | DisplayString | read-only | It describes the system version in the board. |
| STR zxr10SlotPCBVer | 1.3.6.1.4.1.3902.3.6002.1.3.1.15 | DisplayString | read-only | It describes the PCB version in the board. |
| STR zxr10SlotBoardName | 1.3.6.1.4.1.3902.3.6002.1.3.1.16 | DisplayString | read-only | It describes the name the board. |
| INT zxr10SlotReload | 1.3.6.1.4.1.3902.3.6002.1.3.1.17 | INTEGER | read-write | Reload the board. forced(1): Reload the board even if the control boards are asynchronous. graceful(2): Reload the board after synchronization between the control boards. Only the control boards support forced reloading and graceful reloading. There is no difference for the other boards. |
| STR zxr10SlotReloadDesc | 1.3.6.1.4.1.3902.3.6002.1.3.1.18 | DisplayString | read-write | the reload description of the board. Now we don't use it. |
| INT zxr10SlotCardPowerRatedPower | 1.3.6.1.4.1.3902.3.6002.1.3.1.19 | INTEGER | read-only | It describes the RatedPower of the board. |
| INT zxr10SlotLightTotalNum | 1.3.6.1.4.1.3902.3.6002.1.3.1.20 | INTEGER | read-only | the total number of lights in the board. Now we don't use it. |
| TIK zxr10SlotTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.3.1.21 | TimeTicks | read-only | the time of the special card changed lastly. |
| INT zxr10SlotBoardShelfNo | 1.3.6.1.4.1.3902.3.6002.1.3.1.22 | INTEGER | read-only | the No. of the shelf where the special card is inserted. |
| STR zxr10SlotEPLD1Ver | 1.3.6.1.4.1.3902.3.6002.1.3.1.23 | DisplayString | read-only | It describes the EPLD1 version of the special card. |
| STR zxr10SlotEPLD2Ver | 1.3.6.1.4.1.3902.3.6002.1.3.1.24 | DisplayString | read-only | It describes the EPLD2 version of the special card. |
| STR zxr10SlotEPLD3Ver | 1.3.6.1.4.1.3902.3.6002.1.3.1.25 | DisplayString | read-only | It describes the EPLD3 version of the special card. |
| STR zxr10SlotEPLD4Ver | 1.3.6.1.4.1.3902.3.6002.1.3.1.26 | DisplayString | read-only | It describes the EPLD4 version of the special card. |
| STR zxr10SlotPartNumber | 1.3.6.1.4.1.3902.3.6002.1.3.1.27 | DisplayString | read-only | It describes the part number of the special card. |
| STR zxr10SlotManufactureDate | 1.3.6.1.4.1.3902.3.6002.1.3.1.28 | DisplayString | read-only | It describes the Manufacture Date of the special card. |
| STR zxr10SlotAssemblySerialNo | 1.3.6.1.4.1.3902.3.6002.1.3.1.29 | DisplayString | read-only | It describes the AssemlySnNo of the special card. |
| zxr10SlotSubCardTable | 1.3.6.1.4.1.3902.3.6002.1.4 | not-accessible | the description of zxr10 subcard information, it is a list of subcard entries. | |
| zxr10SlotSubCardEntry | 1.3.6.1.4.1.3902.3.6002.1.4.1 | not-accessible | A subcard entry containing objects that descript the subcard information,such as: zxr10SlotSubCardNo,zxr10SlotSubCardType, zxr10SlotSubCardPortNumber,zxr10SlotSubCardELElable.etc. | |
| INT zxr10SlotSubCardNo | 1.3.6.1.4.1.3902.3.6002.1.4.1.1 | INTEGER | read-only | the No. of the subcard where the special subcard is inserted. |
| SUB zxr10SlotSubCardType | 1.3.6.1.4.1.3902.3.6002.1.4.1.2 | SubBoardType | read-only | the type of the subcard. |
| INT zxr10SlotSubCardPortNumber | 1.3.6.1.4.1.3902.3.6002.1.4.1.3 | INTEGER | read-only | the total port number of the special subcard. |
| TIK zxr10SlotSubCardCpuUpTime | 1.3.6.1.4.1.3902.3.6002.1.4.1.4 | TimeTicks | read-only | It describes the time how long the special subcard has run. Now we don't use it. |
| STR zxr10SlotSubCardELElable | 1.3.6.1.4.1.3902.3.6002.1.4.1.5 | DisplayString | read-only | It describes the electric lable of the special subcard. |
| AVA zxr10SlotSubCardAvailStatus | 1.3.6.1.4.1.3902.3.6002.1.4.1.6 | AvailStatus | read-only | the status. of the special subcard. eg ,the current subcard is running, we use 1,else if the card is down, we use 0. |
| STR zxr10SlotSubCardPCBVer | 1.3.6.1.4.1.3902.3.6002.1.4.1.7 | DisplayString | read-only | It describes the PCB version of the subcard. |
| STR zxr10SlotSubCardDescription | 1.3.6.1.4.1.3902.3.6002.1.4.1.8 | DisplayString | read-only | It describes the silk label of the subcard. |
| POW zxr10SlotSubCardPowerVoltageStatus | 1.3.6.1.4.1.3902.3.6002.1.4.1.9 | PowerStatus | read-only | the power voltage status of the special subcard. |
| ONL zxr10SlotSubCardOperStatus | 1.3.6.1.4.1.3902.3.6002.1.4.1.10 | OnlineStatus | read-only | the operstatus. of the special subcard. eg ,the current subcard can work, we use 1, else if the subcard can't,we use 0. |
| TIK zxr10SlotSubCardTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.4.1.11 | TimeTicks | read-only | the time of the special subcard changed lastly. |
| INT zxr10SlotSubCardShelfNo | 1.3.6.1.4.1.3902.3.6002.1.4.1.12 | INTEGER | read-only | the No. of the shelf where the special subcard is inserted. |
| INT zxr10SlotSubCardSlotNo | 1.3.6.1.4.1.3902.3.6002.1.4.1.13 | INTEGER | read-only | the No. of the slot where the special subcard is inserted. |
| STR zxr10SlotSubCardEPLD1Ver | 1.3.6.1.4.1.3902.3.6002.1.4.1.14 | DisplayString | read-only | It describes the EPLD1 version of the special subcard. |
| STR zxr10SlotSubCardEPLD2Ver | 1.3.6.1.4.1.3902.3.6002.1.4.1.15 | DisplayString | read-only | It describes the EPLD2 version of the special subcard. |
| STR zxr10SlotSubCardEPLD3Ver | 1.3.6.1.4.1.3902.3.6002.1.4.1.16 | DisplayString | read-only | It describes the EPLD3 version of the special subcard. |
| STR zxr10SlotSubCardEPLD4Ver | 1.3.6.1.4.1.3902.3.6002.1.4.1.17 | DisplayString | read-only | It describes the EPLD4 version of the special subcard. |
| STR zxr10SlotSubCardPartNumber | 1.3.6.1.4.1.3902.3.6002.1.4.1.18 | DisplayString | read-only | It describes the Part Number of the special subcard. |
| STR zxr10SlotSubCardManufactureDate | 1.3.6.1.4.1.3902.3.6002.1.4.1.19 | DisplayString | read-only | It describes the Manufacture Date of the special subcard. |
| zxr10PortTable | 1.3.6.1.4.1.3902.3.6002.1.5 | not-accessible | the description of port information in the zxr10 card . it is a list of port entries. | |
| zxr10PortEntry | 1.3.6.1.4.1.3902.3.6002.1.5.1 | not-accessible | A port entry containing objects that descript the port information,such as: zxr10PortNo zxr10PortIfIndex zxr10PortType. | |
| INT zxr10PortNo | 1.3.6.1.4.1.3902.3.6002.1.5.1.1 | INTEGER | read-only | the No. of the port on the subcard, which contains several ports . |
| INT zxr10PortIfIndex | 1.3.6.1.4.1.3902.3.6002.1.5.1.2 | INTEGER | read-only | the index of the port on the subcard. |
| POR zxr10PortType | 1.3.6.1.4.1.3902.3.6002.1.5.1.3 | PortType | read-only | the type of the port. |
| PHY zxr10PortPhyStatus | 1.3.6.1.4.1.3902.3.6002.1.5.1.4 | PhyStatus | read-only | the physical status. of the special port. |
| POR zxr10PortPhyEOProperty | 1.3.6.1.4.1.3902.3.6002.1.5.1.5 | PortProperty | read-only | the physical photoelectricity property of the special port. |
| INT zxr10PortPhyPhyIfSpeed | 1.3.6.1.4.1.3902.3.6002.1.5.1.6 | INTEGER | read-only | the transmit speed of this port, unit is Mbps. |
| INT zxr10PortPhyIfMTU | 1.3.6.1.4.1.3902.3.6002.1.5.1.7 | INTEGER | read-only | the mtu of the 2 layer transmitting ability, unit is BYTES. |
| STR zxr10PortName | 1.3.6.1.4.1.3902.3.6002.1.5.1.8 | DisplayString | read-only | the name description of the special port. |
| TIK zxr10PortTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.5.1.9 | TimeTicks | read-only | the time of the special port changed lastly. |
| INT zxr10PortShelfNo | 1.3.6.1.4.1.3902.3.6002.1.5.1.10 | INTEGER | read-only | the No. of the shelf where the special subcard is inserted. |
| INT zxr10PortSlotNo | 1.3.6.1.4.1.3902.3.6002.1.5.1.11 | INTEGER | read-only | the No. of the slot where the special subcard is inserted. |
| INT zxr10PortSubCardNo | 1.3.6.1.4.1.3902.3.6002.1.5.1.12 | INTEGER | read-only | the No. of the subcard where the special subcard is inserted. |
| zxr10SpecialPortTable | 1.3.6.1.4.1.3902.3.6002.1.7 | not-accessible | the description of SpecialPort information in the zxr10 card . it is a list of SpecialPort entries. | |
| zxr10SpecialPortEntry | 1.3.6.1.4.1.3902.3.6002.1.7.1 | not-accessible | A SpecialPort entry containing objects that descript the port information,such as: zxr10SPSlotBoardType,zxr10SPPortNo, zxr10SPPortType,zxr10PortRunningStatus. | |
| BOA zxr10SPSlotBoardType | 1.3.6.1.4.1.3902.3.6002.1.7.1.1 | BoardType | read-only | the type of slotboard where the special port located. |
| INT zxr10SPPortNo | 1.3.6.1.4.1.3902.3.6002.1.7.1.2 | INTEGER | read-only | the No. of the special port. |
| POR zxr10SPPortType | 1.3.6.1.4.1.3902.3.6002.1.7.1.3 | PortType | read-only | the type of the special port. |
| RUN zxr10PortRunningStatus | 1.3.6.1.4.1.3902.3.6002.1.7.1.4 | RunStatus | read-only | the running status of the special port. |
| INT zxr10SPShelfNo | 1.3.6.1.4.1.3902.3.6002.1.7.1.5 | INTEGER | read-only | the No. of the shelf where the special subcard is inserted. |
| INT zxr10SPSlotNo | 1.3.6.1.4.1.3902.3.6002.1.7.1.6 | INTEGER | read-only | the No. of the slot where the special subcard is inserted. |
| zxr10ShelfAbilityTable | 1.3.6.1.4.1.3902.3.6002.1.8 | not-accessible | the description of ShelfAbility information in the zxr10 card . it is a list of ShelfAbility entries. | |
| zxr10ShelfAbilityEntry | 1.3.6.1.4.1.3902.3.6002.1.8.1 | not-accessible | A port entry containing objects that descript the ShelfAbility information,such as: zxr10AShelfAttrib,zxr10AShelfType,zxr10AShelfSlotNumber. | |
| SHE zxr10AShelfAttrib | 1.3.6.1.4.1.3902.3.6002.1.8.1.1 | ShelfAttrib | read-only | the attrib of the special shelf. |
| SHE zxr10AShelfType | 1.3.6.1.4.1.3902.3.6002.1.8.1.2 | ShelfType | read-only | the type of the special shelf. |
| INT zxr10AShelfSlotNumber | 1.3.6.1.4.1.3902.3.6002.1.8.1.3 | INTEGER | read-only | the total slot number of the special shelf. |
| zxr10PeripheralTable | 1.3.6.1.4.1.3902.3.6002.1.9 | not-accessible | the description of peripheral information in the zxr10 card . it is a list of peripheral entries. | |
| zxr10PeripheralEntry | 1.3.6.1.4.1.3902.3.6002.1.9.1 | not-accessible | A peripheral entry containing objects that descript the peripheral information,such as: zxr10MPUBoardType,zxr10PeripheralNo,etc. | |
| BOA zxr10MPUBoardType | 1.3.6.1.4.1.3902.3.6002.1.9.1.1 | BoardType | read-only | the type of the mpu board. |
| INT zxr10PeripheralNo | 1.3.6.1.4.1.3902.3.6002.1.9.1.2 | INTEGER | read-only | the No. of the Peripheral on the special mpu board. |
| PER zxr10PeripheralType | 1.3.6.1.4.1.3902.3.6002.1.9.1.3 | PeripheralType | read-only | the type of the Peripheral on the special mpu board. eg, hard disk, flash. |
| STR zxr10PeripheralDescription | 1.3.6.1.4.1.3902.3.6002.1.9.1.4 | DisplayString | read-only | the description of the Peripheral on the special mpu board. |
| C32 zxr10PeripheralTotalVolume | 1.3.6.1.4.1.3902.3.6002.1.9.1.5 | Counter32 | read-only | the total volume of the special Peripheral. |
| C32 zxr10PeripheralUsedVolume | 1.3.6.1.4.1.3902.3.6002.1.9.1.6 | Counter32 | read-only | the used volume of the special Peripheral. include all users. |
| INT zxr10PeripheralPartitionNum | 1.3.6.1.4.1.3902.3.6002.1.9.1.7 | INTEGER | read-only | the partition number of the special Peripheral. |
| PER zxr10PeripheralCanbeRemoved | 1.3.6.1.4.1.3902.3.6002.1.9.1.8 | PeripheralRemoved | read-only | It describes if the Peripheral can be removed. |
| TIK zxr10PeripheralStartupTime | 1.3.6.1.4.1.3902.3.6002.1.9.1.9 | TimeTicks | read-only | It describes the time between the Peripheral start up and finish init. |
| PER zxr10PeripheralStatus | 1.3.6.1.4.1.3902.3.6002.1.9.1.10 | PeripheralStaus | read-only | the running status of the Peripheral. If the status is ok ,we use 1. |
| INT zxr10PeripheralShelfNo | 1.3.6.1.4.1.3902.3.6002.1.9.1.11 | INTEGER | read-only | the No. of the shelf where the special Peripheral is inserted. |
| INT zxr10PeripheralSlotNo | 1.3.6.1.4.1.3902.3.6002.1.9.1.12 | INTEGER | read-only | the No. of the slot where the special Peripheral is inserted. |
| C32 zxr10PeripheralFreeVolume | 1.3.6.1.4.1.3902.3.6002.1.9.1.13 | Counter32 | read-only | the free volume of the special Peripheral. only for non-root users. |
| zxr10LightTable | 1.3.6.1.4.1.3902.3.6002.1.10 | not-accessible | the description of zxr10 light information, it is a list of light entries. | |
| zxr10LightEntry | 1.3.6.1.4.1.3902.3.6002.1.10.1 | not-accessible | A light entry containing objects that descript the light information,such as: zxr10LBoardType,zxr10LightType,zxr10LightNo,etc. | |
| BOA zxr10LBoardType | 1.3.6.1.4.1.3902.3.6002.1.10.1.1 | BoardType | read-only | the type of the board where the light located. |
| LIG zxr10LightType | 1.3.6.1.4.1.3902.3.6002.1.10.1.2 | LightType | read-only | the type of the light. |
| INT zxr10LightNo | 1.3.6.1.4.1.3902.3.6002.1.10.1.3 | INTEGER | read-only | the No. of the light. Now we don't use it. |
| LIG zxr10LightStatus | 1.3.6.1.4.1.3902.3.6002.1.10.1.4 | LightStatus | read-only | the status of the light. Now we don't use it. |
| STR zxr10LightDescription | 1.3.6.1.4.1.3902.3.6002.1.10.1.5 | DisplayString | read-only | the description of the light. Now we don't use it. |
| INT zxr10LightShelfNo | 1.3.6.1.4.1.3902.3.6002.1.10.1.6 | INTEGER | read-only | the No. of the shelf where the special light is inserted. |
| INT zxr10LightSlotNo | 1.3.6.1.4.1.3902.3.6002.1.10.1.7 | INTEGER | read-only | the No. of the slot where the special light is inserted. |
| INT zxr10LCCNum | 1.3.6.1.4.1.3902.3.6002.1.11 | INTEGER | read-only | the LCC number of the special rack. Only the equipment supported cluster use this node. |
| INT zxr10CFCNum | 1.3.6.1.4.1.3902.3.6002.1.12 | INTEGER | read-only | the CFC number of the special rack. Only the equipment supported cluster use this node. |
| zxr10SFLinkTable | 1.3.6.1.4.1.3902.3.6002.1.13 | not-accessible | the description of zxr10 sf link information, it is a list of SFLink entries. Only the equipment supported cluster use this table. | |
| zxr10SFLinkEntry | 1.3.6.1.4.1.3902.3.6002.1.13.1 | not-accessible | A SFLink entry containing objects that descript the link information,such as: zxr10PortPhyStatus,zxr10PortBandwidth,zxr10FEDownSerdes,zxr10PeerPortNo,etc. | |
| INT zxr10SFLinkShelfNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.1 | INTEGER | read-only | the No. of the shelf where the card is inserted |
| INT zxr10SFLinkSlotNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.2 | INTEGER | read-only | the No. of the slot where the card is inserted |
| INT zxr10SFLinkPortNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.3 | INTEGER | read-only | the No. of the port. |
| INT zxr10SFLinkPortType | 1.3.6.1.4.1.3902.3.6002.1.13.1.4 | INTEGER | read-only | the type of the port. |
| INT zxr10SFLinkPortPhyStatus | 1.3.6.1.4.1.3902.3.6002.1.13.1.5 | INTEGER | read-only | the physical status of the port. |
| INT zxr10SFLinkPortBandwidth | 1.3.6.1.4.1.3902.3.6002.1.13.1.6 | INTEGER | read-only | the bandwidth of the port. |
| INT zxr10SFLinkDownSerdes | 1.3.6.1.4.1.3902.3.6002.1.13.1.7 | INTEGER | read-only | the number of the serdesdown. |
| INT zxr10SFLinkErrSerdes | 1.3.6.1.4.1.3902.3.6002.1.13.1.8 | INTEGER | read-only | the number of the serdeserr. |
| INT zxr10SFLinkErrSerdestotal | 1.3.6.1.4.1.3902.3.6002.1.13.1.9 | INTEGER | read-only | the total number of the serdeserr. |
| INT zxr10SFLinkPeerRackNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.10 | INTEGER | read-only | the rack no. of the peer port. |
| INT zxr10SFLinkPeerShelfNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.11 | INTEGER | read-only | the shelf no. of the peer port. |
| INT zxr10SFLinkPeerSlotNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.12 | INTEGER | read-only | the slot no. of the peer port. |
| INT zxr10SFLinkPeerPortNo | 1.3.6.1.4.1.3902.3.6002.1.13.1.13 | INTEGER | read-only | the port no. of the peer port. |
| INT zxr10SFLinkPeerPortType | 1.3.6.1.4.1.3902.3.6002.1.13.1.14 | INTEGER | read-only | the port type of the peer port. |
| TIK zxr10SFLinkCascadeTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.13.1.15 | TimeTicks | read-only | the time of the port changed lastly.. |
| zxr10ESLinkTable | 1.3.6.1.4.1.3902.3.6002.1.14 | not-accessible | the description of zxr10 ES link information, it is a list of ESLink entries. Only the equipment supported cluster use this table. | |
| zxr10ESLinkEntry | 1.3.6.1.4.1.3902.3.6002.1.14.1 | not-accessible | A ESLink entry containing objects that descript the link information,such as: zxr10PortPhyStatus,zxr10PortBandwidth,zxr10PeerPortNo,etc. | |
| INT zxr10ESLinkShelfNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.1 | INTEGER | read-only | the No. of the shelf where the card is inserted |
| INT zxr10ESLinkSlotNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.2 | INTEGER | read-only | the No. of the slot where the card is inserted |
| INT zxr10ESLinkPortNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.3 | INTEGER | read-only | the No. of the port. |
| INT zxr10ESLinkPortType | 1.3.6.1.4.1.3902.3.6002.1.14.1.4 | INTEGER | read-only | the type of the port. |
| INT zxr10ESLinkPortPhyStatus | 1.3.6.1.4.1.3902.3.6002.1.14.1.5 | INTEGER | read-only | the physical status of the port. |
| INT zxr10ESLinkPortBandwidth | 1.3.6.1.4.1.3902.3.6002.1.14.1.6 | INTEGER | read-only | the bandwidth of the port. |
| INT zxr10ESLinkPeerRackNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.7 | INTEGER | read-only | the rack no. of the peer port. |
| INT zxr10ESLinkPeerShelfNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.8 | INTEGER | read-only | the shelf no. of the peer port. |
| INT zxr10ESLinkPeerSlotNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.9 | INTEGER | read-only | the slot no. of the peer port. |
| INT zxr10ESLinkPeerPortNo | 1.3.6.1.4.1.3902.3.6002.1.14.1.10 | INTEGER | read-only | the port no. of the peer port. |
| INT zxr10ESLinkPeerPortType | 1.3.6.1.4.1.3902.3.6002.1.14.1.11 | INTEGER | read-only | the port type of the peer port. |
| TIK zxr10ESLinkCascadeTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.14.1.12 | TimeTicks | read-only | the time of the port changed lastly. |
| zxr10SlotSpecialSubCardTable | 1.3.6.1.4.1.3902.3.6002.1.15 | not-accessible | the description of zxr10 subcard information, it is a list of subcard entries. | |
| zxr10SlotSpecialSubCardEntry | 1.3.6.1.4.1.3902.3.6002.1.15.1 | not-accessible | A subcard entry containing objects that descript the subcard information,such as: zxr10SlotSpecialSubCardNo,zxr10SlotSpecialSubCardType, zxr10SlotSpecialSubCardPortNumber,zxr10SlotSpecialSubCardELElable.etc. | |
| INT zxr10SlotSpecialSubCardShelfNo | 1.3.6.1.4.1.3902.3.6002.1.15.1.1 | INTEGER | read-only | the No. of the shelf where the special subcard is inserted. |
| INT zxr10SlotSpecialSubCardSlotNo | 1.3.6.1.4.1.3902.3.6002.1.15.1.2 | INTEGER | read-only | the No. of the slot where the special subcard is inserted. |
| INT zxr10SlotSpecialSubCardNo | 1.3.6.1.4.1.3902.3.6002.1.15.1.3 | INTEGER | read-only | the No. of the subcard where the special subcard is inserted. |
| SPB zxr10SlotSpecialSubCardType | 1.3.6.1.4.1.3902.3.6002.1.15.1.4 | SPboardType | read-only | the type of the subcard. |
| INT zxr10SlotSpecialSubCardPortNumber | 1.3.6.1.4.1.3902.3.6002.1.15.1.5 | INTEGER | read-only | the total port number of the special subcard. |
| TIK zxr10SlotSpecialSubCardCpuUpTime | 1.3.6.1.4.1.3902.3.6002.1.15.1.6 | TimeTicks | read-only | It describes the time how long the special subcard has run. |
| STR zxr10SlotSpecialSubCardELElable | 1.3.6.1.4.1.3902.3.6002.1.15.1.7 | DisplayString | read-only | It describes the electric lable of the special subcard. |
| AVA zxr10SlotSpecialSubCardAvailStatus | 1.3.6.1.4.1.3902.3.6002.1.15.1.8 | AvailStatus | read-only | the status. of the special subcard. eg ,the current subcard is running, we use 1,else if the card is down, we use 0 . |
| STR zxr10SlotSpecialSubCardPCBVer | 1.3.6.1.4.1.3902.3.6002.1.15.1.9 | DisplayString | read-only | It describes the PCB version of the subcard. |
| STR zxr10SlotSpecialSubCardDescription | 1.3.6.1.4.1.3902.3.6002.1.15.1.10 | DisplayString | read-only | It describes the silk label of the subcard. |
| POW zxr10SlotSpecialSubCardPowerVoltageStatus | 1.3.6.1.4.1.3902.3.6002.1.15.1.11 | PowerStatus | read-only | the power voltage status of the special subcard. |
| ONL zxr10SlotSpecialSubCardOperStatus | 1.3.6.1.4.1.3902.3.6002.1.15.1.12 | OnlineStatus | read-only | the operstatus. of the special subcard. eg ,the current subcard can work, we use 1, else if the subcard can't,we use 0. |
| TIK zxr10SlotSpecialSubCardTimeStamp | 1.3.6.1.4.1.3902.3.6002.1.15.1.13 | TimeTicks | read-only | the time of the special subcard changed lastly. |
| STR zxr10SlotSpecialSubCardEPLD1Ver | 1.3.6.1.4.1.3902.3.6002.1.15.1.14 | DisplayString | read-only | It describes the EPLD1 version of the special subcard. |
| STR zxr10SlotSpecialSubCardEPLD2Ver | 1.3.6.1.4.1.3902.3.6002.1.15.1.15 | DisplayString | read-only | It describes the EPLD2 version of the special subcard. |
| STR zxr10SlotSpecialSubCardEPLD3Ver | 1.3.6.1.4.1.3902.3.6002.1.15.1.16 | DisplayString | read-only | It describes the EPLD3 version of the special subcard. |
| STR zxr10SlotSpecialSubCardEPLD4Ver | 1.3.6.1.4.1.3902.3.6002.1.15.1.17 | DisplayString | read-only | It describes the EPLD4 version of the special subcard. |
| zxr10EthPhyPortTable | 1.3.6.1.4.1.3902.3.6002.1.16 | not-accessible | the description of zxr10 ethernet physical port information, it is a list of EthPhyPort entries. | |
| zxr10EthPhyPortEntry | 1.3.6.1.4.1.3902.3.6002.1.16.1 | not-accessible | A EthPhyPort entry containing objects that descript the Ethernet physical port information,such as: zxr10EthPhyPortNegotiation,zxr10EthPhyPortMdixOrMdi,zxr10EthPhyPortInflowCtrl,etc. | |
| STR zxr10EthPhyPortName | 1.3.6.1.4.1.3902.3.6002.1.16.1.1 | DisplayString | read-only | the name of the ether physical port. |
| INT zxr10EthPhyPortIndex | 1.3.6.1.4.1.3902.3.6002.1.16.1.2 | INTEGER | read-only | the ifindex of the ether physical port |
| INT zxr10EthPhyPortFrameType | 1.3.6.1.4.1.3902.3.6002.1.16.1.3 | INTEGER | read-only | the frame type of the ether physical port |
| INT zxr10EthPhyPortNegotiation | 1.3.6.1.4.1.3902.3.6002.1.16.1.4 | INTEGER | read-write | the negotiation property of the ether physical port. |
| INT zxr10EthPhyPortJumbo | 1.3.6.1.4.1.3902.3.6002.1.16.1.5 | INTEGER | read-only | the jumbo property of the ether physical port. |
| INT zxr10EthPhyPortMdixOrMdi | 1.3.6.1.4.1.3902.3.6002.1.16.1.6 | INTEGER | read-only | the mid mode of the ether physical port. |
| I32 zxr10EthPhyPortIpg | 1.3.6.1.4.1.3902.3.6002.1.16.1.7 | Integer32 | read-only | the ipg property of the ether physical port. |
| INT zxr10EthPhyPortLoopback | 1.3.6.1.4.1.3902.3.6002.1.16.1.8 | INTEGER | read-only | the loopback property of the ether physical port. |
| INT zxr10EthPhyPortEOProperty | 1.3.6.1.4.1.3902.3.6002.1.16.1.9 | INTEGER | read-only | the electric or opitical property of the ether physical port. |
| INT zxr10EthPhyPortInflowCtrl | 1.3.6.1.4.1.3902.3.6002.1.16.1.10 | INTEGER | read-only | the inflow control of the ether physical port. |
| INT zxr10EthPhyPortOutflowCtrl | 1.3.6.1.4.1.3902.3.6002.1.16.1.11 | INTEGER | read-only | the outflow control of the ether physical port. |
| INT zxr10EthPhyPortDuplex | 1.3.6.1.4.1.3902.3.6002.1.16.1.12 | INTEGER | read-write | the duplex type of the ether physical port. |
| INT zxr10EthPhyPortSpeed | 1.3.6.1.4.1.3902.3.6002.1.16.1.13 | INTEGER | read-write | the speed mode of the ether physical port. |
| zxr10VirtualSubcardTable | 1.3.6.1.4.1.3902.3.6002.1.17 | not-accessible | the description of zxr10 virtual subcard information, it is a list of virtual subcard entries. | |
| zxr10VirtualSubcardEntry | 1.3.6.1.4.1.3902.3.6002.1.17.1 | not-accessible | A virtual subcard entry containing objects that descript the virtual subcard in MPU, which contains special port in MPU. | |
| INT zxr10VirtualSubcardShelfNo | 1.3.6.1.4.1.3902.3.6002.1.17.1.1 | INTEGER | read-only | the shelf no. of the virtual subcard. |
| INT zxr10VirtualSubcardSlotNo | 1.3.6.1.4.1.3902.3.6002.1.17.1.2 | INTEGER | read-only | the slot no. of the virtual subcard. |
| INT zxr10VirtualSubcardNo | 1.3.6.1.4.1.3902.3.6002.1.17.1.3 | INTEGER | read-only | the subslot no. of the virtual subcard. |
| INT zxr10VirtualSubcardType | 1.3.6.1.4.1.3902.3.6002.1.17.1.4 | INTEGER | read-only | the subcard type no. of the virtual subcard. |
| INT zxr10VirtualSubcardPortNum | 1.3.6.1.4.1.3902.3.6002.1.17.1.5 | INTEGER | read-only | the port number no. of the virtual subcard. |
| zxr10SlotFuncTable | 1.3.6.1.4.1.3902.3.6002.1.18 | not-accessible | the description of zxr10 card's function type information, it is a list of card entries. | |
| zxr10SlotFuncEntry | 1.3.6.1.4.1.3902.3.6002.1.18.1 | not-accessible | A card entry containing objects that descript the card's function type information,such as: zxr10SlotFuncShelfNo,zxr10SlotFuncSlotNo,zxr10SlotFuncSubSlotNo, zxr10SlotFuncType,etc. | |
| INT zxr10SlotFuncShelfNo | 1.3.6.1.4.1.3902.3.6002.1.18.1.1 | INTEGER | read-only | the No. of the special shelf. |
| INT zxr10SlotFuncSlotNo | 1.3.6.1.4.1.3902.3.6002.1.18.1.2 | INTEGER | read-only | the No. of the slot where the special card is inserted. |
| INT zxr10SlotFuncSubSlotNo | 1.3.6.1.4.1.3902.3.6002.1.18.1.3 | INTEGER | read-only | the No. of the slot where the special card is inserted. |
| INT zxr10SlotFuncType | 1.3.6.1.4.1.3902.3.6002.1.18.1.4 | INTEGER | read-only | the function type of the card. |
RFC description
ZTE T8000 rack and chassis physical components including shelves, boards, and interfaces.
Start monitoring ZTE ZXR10 T8000 chassis switch/router (shelf/slot/card-presence inventory status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.