All MIBs › ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB
Organization: ZTE Corporation
Last Updated: 2012-03-26
Category: ZTE Access Node (ZTE-AN) Management
Description: Defines ZTE access node port identification profile templates for subscriber circuit ID generation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB?
ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing port-identification profile configuration (DHCP Option 82-style circuit-ID tagging) on ZTE access-network equipment on ZTE ZXR10 carrier routers/switches. Its objects cover a system-wide configuration mode and global operator-profile selection, a format-profile table (name, row status), a circuit-ID-syntax table (component index/type/ID/width/string/profile, row status) building a composite circuit-ID string, and an operator-profile table (name, PON/LAN format-profile references, DHCPv4 Option 82 relay-agent enable/trust/policy, and ALC tag). As a configuration/status MIB it lets an administrator audit and monitor port-identification profile configuration (DHCP Option 82-style circuit-ID tagging) on ZTE access-network equipment on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 carrier routers/switches
Monitoring Examples
An administrator reviews this MIB's objects to confirm port-identification profile configuration (DHCP Option 82-style circuit-ID tagging) on ZTE access-network equipment is configured and operating as expected on a ZTE ZXR10 platform.
What Can Be Monitored
- port-identification profile configuration (DHCP Option 82-style circuit-ID tagging) on ZTE access-network equipment
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From ZTE-AN-IF-MIB
| zxAnSubIfIndex | OBJECT-TYPE |
From ZTE-AN-SMI
| zxAnServiceSecurity | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxAnPortIdentificationProfileMib | 1.3.6.1.4.1.3902.1082.70.67 | The MIB module for the management of port identification profile configuration. | ||
| zxAnPortIdPrfGlobalObjects | 1.3.6.1.4.1.3902.1082.70.67.1 | |||
| INT zxAnPortIdSystemConfMode | 1.3.6.1.4.1.3902.1082.70.67.1.1 | INTEGER | read-write | The port identification configuration mode of the system. The following is the explanation of each value of variable zxAnPortIdSystemConfMode. - normal(1): the efficient configuration of port identification operation is which configured under the interface mode, not by profile. - profile(2): the efficient configuration of port identification operation is which configured by operator profile. The operator profile is global applied, or applied in the interface, or applied in the VLAN. The default value of variable zxAnPortIdSystemConfMode in each project maybe different. C6XX only support profile(2). |
| STR zxAnPortIdGlobalOperatorPrf | 1.3.6.1.4.1.3902.1082.70.67.1.2 | DisplayString | read-write | The operator profile name of port identification which is global configured. Size of the attribute is zero means not configured. |
| BIT zxAnPortIdCapabilities | 1.3.6.1.4.1.3902.1082.70.67.1.3 | Bits | read-only | The port identifacation capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. - dhcpV6L2RAWorkMode(0): value 1 means supporting zxAnPortIdOperDhcpV6L2RAWorkMode. - portIdOperLanFormatPrf(1): value 1 means supporting zxAnPortIdOperLanFormatPrf. - portIdOperDslDeprecated(2): value 1 means unsupporting zxAnPortIdOperAtmFormatPrf, zxAnPortIdOperPtmEtherFormatPrf, zxAnPortIdOperDhcpV4AlcTag, zxAnPortIdOperPppoeAlcTag, zxAnPortIdOperRelaySessionId, zxAnPortIdOperPppMaxPayLoad, zxAnPortIdOperDslfIwfPppoe, zxAnPortIdIfConfAlcEnable. - portIdOperRidConf(3): value 1 means supporting zxAnPortIdOperDhcpV4RidEnable, zxAnPortIdOperDhcpV4RidFormatPrf, zxAnPortIdOperDhcpV6RidEnable, zxAnPortIdOperDhcpV6RidFormatPrf, zxAnPortIdOperPppoeRidEnable, zxAnPortIdOperPppoeRidFormatPrf. - portIdOperAlcTagConf(4): value 1 means supporting zxAnPortIdOperDhcpV4AlcTag, zxAnPortIdOperPppoeAlcTag, zxAnPortIdOperDhcpV6AlcTag, regardless of portIdOperDslDeprecated. |
| zxAnPortIdPrfObjects | 1.3.6.1.4.1.3902.1082.70.67.2 | |||
| zxAnPortIdFormatPrfTable | 1.3.6.1.4.1.3902.1082.70.67.2.2 | not-accessible | This table contains information of the port identification format profile configuration. One entry in this table reflects a format profile defined by a manager. | |
| zxAnPortIdFormatPrfEntry | 1.3.6.1.4.1.3902.1082.70.67.2.2.1 | not-accessible | An entry in zxAnPortIdFormatPrfTable, which is indexed by the zxAnPortIdFormatPrfName. To create a format profile, variable zxAnPortIdFormatPrfRowStatus must be included in one SNMP set operation. | |
| STR zxAnPortIdFormatPrfName | 1.3.6.1.4.1.3902.1082.70.67.2.2.1.1 | DisplayString | not-accessible | A port identification format profile name. |
| ROW zxAnPortIdFormatPrfRowStatus | 1.3.6.1.4.1.3902.1082.70.67.2.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnPortIdFormatPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnPortIdCircuitIdSyntaxTable | 1.3.6.1.4.1.3902.1082.70.67.2.3 | not-accessible | This table is to provide circuit ID syntax configuration. One entry in this table reflects a syntax item define by a manager, which is a component of a port identification format profile. | |
| zxAnPortIdCircuitIdSyntaxEntry | 1.3.6.1.4.1.3902.1082.70.67.2.3.1 | not-accessible | An entry in zxAnPortIdCircuitIdSyntaxTable, which is index by the zxAnPortIdFormatPrfName and zxAnPortIdCidComponentIndex. If zxAnPortIdCidComponentType is standardVar(1) or extendedVar(2), zxAnPortIdCidComponentString can not be configured. If zxAnPortIdCidComponentType is separator(3), zxAnPortIdCidComponentWidth and zxAnPortIdCidComponentString can not be configured. If zxAnPortIdCidComponentType is userDefinedString(4), zxAnPortIdCidComponentId,zxAnPortIdCidComponentWidth can not be configured. After an entry is created, all variables can not be modified. | |
| I32 zxAnPortIdCidComponentIndex | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.1 | Integer32 | not-accessible | A key that identifies a component in the circuit ID syntax of a port identification format profile. |
| INT zxAnPortIdCidComponentType | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.2 | INTEGER | read-create | An attribute that identifies the type of this component. The following types are possible: standardVar - A TR-101 based variable(1: access node id, 2: chassis, 3: rack, 4: frame, 5: slot, 6: sub-slot, 7: port, 8: vpi, 9: vci, 10: q-vid, 11: ethernet-priority) extendedVar - A proprietary variable(1: onu id, 2: gemPort, 3: cvlan, 4: svlan, 5: sn, 6: loid, 7: loidpw, 8: onu-number, 9: onu-info, 10: access-mode, 11: access-node-type, 12: xpi, 13: xci, 14: vport, 15: user-defined-cid, 16:src-mac, 17: onu-name, 18: user-defined-rid) separator - A delimiter (6: space) userDefinedString - Information configured by the network operator. |
| I32 zxAnPortIdCidComponentId | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.3 | Integer32 | read-create | A unique and content sensitive identifier for the specific definition of this component. The following identifiers are expected: - A row number in table 2 of TR-101 (R-126). - An index into a proprietary managed entity that specifies possible proprietary variables. - An index into a proprietary managed entity that specifies possible constant character strings. |
| I32 zxAnPortIdCidComponentWidth | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.4 | Integer32 | read-create | The width of the port identification circuit ID syntax component. If the length of component is less than the width then fill zero in front of the component. Value 0 means unconfigured. |
| STR zxAnPortIdCidComponentString | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.5 | DisplayString | read-create | Information configured by the network operator. |
| STR zxAnPortIdCidComponentProfile | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.6 | DisplayString | read-create | At present, this object is the syntax profile of the ONU information. It is supported when the component is onu-info (when zxAnPortIdCidComponentType is extendedVar(2) and zxAnPortIdCidComponentType is onu-info(9)). The profile is also defined in zxAnPortIdFormatPrfTable. |
| ROW zxAnPortIdCidComponentRowStatus | 1.3.6.1.4.1.3902.1082.70.67.2.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnPortIdCircuitIdSyntaxEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnPortIdOperatorPrfTable | 1.3.6.1.4.1.3902.1082.70.67.2.4 | not-accessible | This table contains information of the port identification operator profile configuration. One entry in this table reflects a operator profile defined by a manager. | |
| zxAnPortIdOperatorPrfEntry | 1.3.6.1.4.1.3902.1082.70.67.2.4.1 | not-accessible | An entry in zxAnPortIdOperatorPrfTable, which is indexed by the zxAnPortIdOperPrfName. To create an operator profile, variable zxAnPortIdOperPrfRowStatus must be included in one SNMP set operation. After an entry is created, other variables in the table can be modified. | |
| STR zxAnPortIdOperPrfName | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.1 | DisplayString | not-accessible | A port identification operator profile name. |
| STR zxAnPortIdOperPonFormatPrf | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.4 | DisplayString | read-create | Format profile of port identification applied while the access node type is pon. |
| STR zxAnPortIdOperLanFormatPrf | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.5 | DisplayString | read-create | Format profile of port identification applied while the access node type is PTP. |
| INT zxAnPortIdOperDhcpV4L2RAEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.11 | INTEGER | read-create | The operator profile switch used to activate or deactivate interface DHCPv4 layer-2 relay agent. There are two states: - enabled: the DHCPv4 layer-2 relay agent is activated. - disabled: the DHCPv4 layer-2 relay agent is deactivated. |
| T/F zxAnPortIdOperDhcpV4L2RATrust | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.12 | TruthValue | read-create | DHCPv4 layer-2 relay agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV4L2RAPolicy. |
| INT zxAnPortIdOperDhcpV4L2RAPolicy | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.13 | INTEGER | read-create | DHCPv4 layer-2 relay agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV4L2RATrust. In addition, a manager must comply with the following rules: - when trust flag is true, policy can be set to keep or replace, - when trust flag is false, policy can be set to discard or add. |
| ZXA zxAnPortIdOperDhcpV4AlcTag | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.14 | ZxAnAccessLoopTagType | read-create | Access loop characteristics of DHCPv4 supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported. It used only by DHCPv4. |
| INT zxAnPortIdOperDhcpV6L2RAEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.21 | INTEGER | read-create | The operator profile switch used to activate or deactivate interface DHCPv6 layer-2 relay agent. There are two states: - enabled: the DHCPv6 layer-2 relay agent is activated. - disabled: the DHCPv6 layer-2 relay agent is deactivated. |
| T/F zxAnPortIdOperDhcpV6L2RATrust | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.22 | TruthValue | read-create | DHCPv6 layer-2 relay agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV6L2RAPolicy. |
| INT zxAnPortIdOperDhcpV6L2RAPolicy | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.23 | INTEGER | read-create | DHCPv6 layer-2 relay agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV6L2RATrust. In addition, a manager must comply with the following rules: - when trust flag is true, policy can be set to keep or replace, - when trust flag is false, policy can be set to discard or add. |
| ZXA zxAnPortIdOperDhcpV6AlcTag | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.24 | ZxAnAccessLoopTagType | read-create | Access loop characteristics of DHCPv6 supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported. It used by DHCPv6 at relay mode. |
| INT zxAnPortIdOperPppoeIAEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.31 | INTEGER | read-create | The operator profile switch used to activate or deactivate interface PPPoE intermediate agent. There are two states: - enabled: the PPPoE intermediate agent is activated. - disabled: the PPPoE intermediate agent is deactivated. |
| T/F zxAnPortIdOperPppoeIATrust | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.32 | TruthValue | read-create | PPPoE intermediate agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperPppoeIAPolicy. |
| INT zxAnPortIdOperPppoeIAPolicy | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.33 | INTEGER | read-create | PPPoE intermediate agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperPppoeIATrust. In addition, a manager must comply with the following rules: - when trust flag is true, policy can be set to keep or replace, - when trust flag is false, policy can be set to discard or add. |
| ZXA zxAnPortIdOperPppoeAlcTag | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.34 | ZxAnAccessLoopTagType | read-create | Access loop characteristics of PPPoE supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported.It used by PPPoE and PPPoA. |
| INT zxAnPortIdOperDhcpV6L2RAWorkMode | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.38 | INTEGER | read-create | DHCPv6 layer 2 relay agent work mode of the profile. LDRA means the protocol RFC6221(Lightweight DHCPv6 Relay Agent). noLdra: The format of the relay messages do not meet RFC6221 standards. ldra: The format of the relay messages meet RFC6221 standards. invalid: The format of the relay message is configured by zxAnDhcpV6L2RAWorkMode. |
| INT zxAnPortIdOperDhcpV4RidEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.40 | INTEGER | read-create | The operator profile switch used to enable or disable remote ID while the protocol type is DHCPv4. |
| STR zxAnPortIdOperDhcpV4RidFormatPrf | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.41 | DisplayString | read-create | Format profile of remote ID applied while the protocol type is DHCPv4. |
| INT zxAnPortIdOperDhcpV6RidEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.42 | INTEGER | read-create | The operator profile switch used to enable or disable remote ID while the protocol type is DHCPv6. |
| STR zxAnPortIdOperDhcpV6RidFormatPrf | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.43 | DisplayString | read-create | Format profile of remote ID applied while the protocol type is DHCPv6. |
| INT zxAnPortIdOperPppoeRidEnable | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.44 | INTEGER | read-create | The operator profile switch used to enable or disable remote ID while the protocol type is PPPoE. |
| STR zxAnPortIdOperPppoeRidFormatPrf | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.45 | DisplayString | read-create | Format profile of remote ID applied while the protocol type is PPPoE. |
| ROW zxAnPortIdOperPrfRowStatus | 1.3.6.1.4.1.3902.1082.70.67.2.4.1.100 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnPortIdOperatorPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnPortIdVlanOperPrfConfTable | 1.3.6.1.4.1.3902.1082.70.67.2.5 | not-accessible | This table is to provide the VLAN operator profile configuration. One entry in this table reflects an operator profile has been applied to one VLAN. | |
| zxAnPortIdVlanOperPrfConfEntry | 1.3.6.1.4.1.3902.1082.70.67.2.5.1 | not-accessible | An entry in zxAnPortIdVlanOperPrfConfTable, which is indexed by the zxAnPortIdVid. To create an entry, variables zxAnPortIdVlanOperPrf and zxAnPortIdVlanOperPrfRowStatus must be included in one SNMP set operation. After an entry is created, variable zxAnPortIdVlanOperPrf can be modified. | |
| I32 zxAnPortIdVid | 1.3.6.1.4.1.3902.1082.70.67.2.5.1.1 | Integer32 | not-accessible | The VLAN to which an operator profile of port identification can be applied. |
| STR zxAnPortIdVlanOperPrf | 1.3.6.1.4.1.3902.1082.70.67.2.5.1.2 | DisplayString | read-create | A port identification operator profile name. |
| ROW zxAnPortIdVlanOperPrfRowStatus | 1.3.6.1.4.1.3902.1082.70.67.2.5.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnPortIdVlanOperPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnPortIdIfOperPrfConfTable | 1.3.6.1.4.1.3902.1082.70.67.2.6 | not-accessible | This table is to provide the interface operator profile configuration. One entry in this table reflects an operator profile has been applied to an interface. | |
| zxAnPortIdIfOperPrfConfEntry | 1.3.6.1.4.1.3902.1082.70.67.2.6.1 | not-accessible | An entry in zxAnPortIdIfOperPrfConfTable, which is indexed by the ifindex and zxAnSubIfIndex. To create an entry, variables zxAnPortIdIfOperPrf and zxAnPortIdIfOperPrfRowStatus must be included in one SNMP set operation. After an entry is created, variable zxAnPortIdIfOperPrf can be modified. | |
| STR zxAnPortIdIfOperPrf | 1.3.6.1.4.1.3902.1082.70.67.2.6.1.1 | DisplayString | read-create | A port identification operator profile name. |
| ROW zxAnPortIdIfOperPrfRowStatus | 1.3.6.1.4.1.3902.1082.70.67.2.6.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnPortIdIfOperPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnPortIdPrfConformance | 1.3.6.1.4.1.3902.1082.70.67.4 | |||
| zxAnPortIdPrfCompliances | 1.3.6.1.4.1.3902.1082.70.67.4.1 | |||
| zxAnPortIdPrfCompliance | 1.3.6.1.4.1.3902.1082.70.67.4.1.1 | The compliance statement for entities which implement the ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB. | ||
| zxAnPortIdPrfGroups | 1.3.6.1.4.1.3902.1082.70.67.4.2 | |||
| zxAnPortIdSystemConfModeGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.1 | A collection of objects providing information of port identification configuration mode in the system. | ||
| zxAnPortIdGlobalOperatorPrfGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.2 | A collection of objects providing information of the port identification operator profile which is global applied. | ||
| zxAnPortIdFormatPrfGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.3 | A collection of objects providing information of the port identifiction format profile. | ||
| zxAnPortIdCircuitIdSyntaxGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.4 | A collection of objects providing information of the circuit ID syntax item of each format profile. | ||
| zxAnPortIdOperatorPrfGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.5 | A collection of objects providing information of the port identifiction operator profile. | ||
| zxAnPortIdVlanOperPrfConfGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.6 | A collection of objects providing the operator profile information of the VLAN. | ||
| zxAnPortIdIfOperPrfConfGroup | 1.3.6.1.4.1.3902.1082.70.67.4.2.7 | A collection of objects providing the operator profile information of the interface. |
RFC description
Manages port identification profiles and DSL access loop characteristics on ZTE access nodes.
Start monitoring ZTE ZXR10 carrier routers/switches (DHCP Option-82-style circuit-ID profile config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.