All MIBs › ZXR10-ACL-NEW-MIB
Organization: ZTE Corporation
Last Updated: 2017-07-11
Category: ZTE ZXR10 Routing and Switching
Description: Manages ZTE ZXR10 router enhanced ACL configuration with extended matching criteria and policy actions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-ACL-NEW-MIB?
ZXR10-ACL-NEW-MIB is a ZTE ZXR10 router MIB providing an enhanced Access Control List (ACL) configuration model, supporting extended IPv4 match criteria (source/destination address and wildcard) and rule-level permit/deny policy actions. It exposes configuration data organized into ACL list and rule tables, including global ACL objects and ACL-related notifications. This is largely a security-policy configuration MIB rather than a hardware-fault MIB, but its notifications group provides software-level event visibility -- for example when ACL rules are added, changed, or hit -- supporting audit and troubleshooting of the router's traffic-filtering behavior. It is a ZTE ZXROS-specific enhancement of standard ACL concepts, likely superseding an earlier/simpler ACL MIB (implied by the "-NEW" naming) without an explicit external standard dependency. It is deployed on ZTE ZXR10 series routers/switches where fine-grained IPv4 ACL policy needs to be provisioned and audited via SNMP, and the ZXR10-ACL-NEW-MIB download is available for administrators to load into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-ACL-NEW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 series routers/switches
Monitoring Examples
An admin would poll zxr10ACLv4ListTable/zxr10ACLv4ListEntry (zxr10ACLv4ListName) to enumerate configured ACLs, then zxr10ACLv4RuleTable/zxr10ACLv4RuleEntry to inspect individual rules by zxr10ACLv4RuleAclName and zxr10ACLv4RuleRuleID, checking zxr10ACLv4RulePermitDeny against the configured zxr10ACLv4RuleSrcAddr/SrcWildcard and zxr10ACLv4RuleDestAddr/DestWildcard. Discovering a rule with an unexpectedly broad wildcard mask permitting traffic that should be denied would reveal a security policy misconfiguration; zxr10ACLNotifications could also be watched for unexpected ACL change events.
What Can Be Monitored
- configured ACL list names
- ACL rule match criteria (source/destination address, wildcard)
- ACL rule permit/deny action
- ACL configuration change notifications
This MIB depends on
Related MIBs
Imported Objects
From IPV6-TC
| Ipv6Address |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
From ZXR10-SMI
| zxr10 | OBJECT-IDENTITY |
| zxr10RosngMIB | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxr10AclNewMIB | 1.3.6.1.4.1.3902.3.6000.602 | The MIB module to describe the ACL protocol. | ||
| zxr10ACLGlobalObjects | 1.3.6.1.4.1.3902.3.6000.602.1 | |||
| zxr10ACLObjects | 1.3.6.1.4.1.3902.3.6000.602.2 | |||
| zxr10ACLv4Objects | 1.3.6.1.4.1.3902.3.6000.602.2.1 | |||
| zxr10ACLv4ListTable | 1.3.6.1.4.1.3902.3.6000.602.2.1.1 | not-accessible | IPv4 ACL Table | |
| zxr10ACLv4ListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.1.1.1 | not-accessible | IPv4 ACL | |
| STR zxr10ACLv4ListName | 1.3.6.1.4.1.3902.3.6000.602.2.1.1.1.1 | DisplayString | read-only | Name of an IPv4 access-list (1-31 characters) |
| zxr10ACLv4RuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.1.2 | not-accessible | IPv4 ACL Rule Table | |
| zxr10ACLv4RuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1 | not-accessible | IPv4 ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type,ip type,tcp type,udp type,icmp type, represented by zxr10ACLv4RuleIpProtocol in this table. According to the rule type (zxr10ACLv4RuleIpProtocol), the following leaf nodes are effective. 1. rule type : std type effective leaf nodes: zxr10ACLv4RuleAclName , zxr10ACLv4RuleRuleID, zxr10ACLv4RulePermitDeny, zxr10ACLv4RuleSrcAddr, zxr10ACLv4RuleSrcWildcard, zxr10ACLv4RuleTimerangeName, zxr10ACLv4RuleSrcUrl, zxr10ACLv4RuleDescription 2. rule type : ip type effective leaf nodes: zxr10ACLv4RuleAclName , zxr10ACLv4RuleRuleID, zxr10ACLv4RulePermitDeny, zxr10ACLv4RuleSrcAddr, zxr10ACLv4RuleSrcWildcard, zxr10ACLv4RuleDestAddr, zxr10ACLv4RuleDestWildcard, zxr10ACLv4RuleIpProtocol, zxr10ACLv4RulePrecedence, zxr10ACLv4RuleTOS, zxr10ACLv4RuleDSCP, zxr10ACLv4RuleFragment, zxr10ACLv4RuleTtlOpr, zxr10ACLv4RuleTtlValue, zxr10ACLv4RuleTtlRange, zxr10ACLv4RuleTimerangeName, zxr10ACLv4RuleSrcUrl, zxr10ACLv4RuleDestUrl, zxr10ACLv4RuleDescription, zxr10ACLv4RulePrecRange, zxr10ACLv4RuleDscpRange 3. rule type : tcp type effective leaf nodes: zxr10ACLv4RuleAclName, zxr10ACLv4RuleRuleID, zxr10ACLv4RulePermitDeny, zxr10ACLv4RuleSrcAddr, zxr10ACLv4RuleSrcWildcard, zxr10ACLv4RuleDestAddr, zxr10ACLv4RuleDestWildcard, zxr10ACLv4RuleIpProtocol, zxr10ACLv4RuleSrcPortOpr, zxr10ACLv4RuleSrcPortValue, zxr10ACLv4RuleSrcPortRange, zxr10ACLv4RuleDestPortOpr, zxr10ACLv4RuleDestPortValue, zxr10ACLv4RuleDestPortRange, zxr10ACLv4RuleTCPEstablish, zxr10ACLv4RulePrecedence, zxr10ACLv4RuleTOS, zxr10ACLv4RuleDSCP, zxr10ACLv4RuleFragment, zxr10ACLv4RuleRstFlag, zxr10ACLv4RuleAckFlag, zxr10ACLv4RuleFinFlag, zxr10ACLv4RuleSynFlag, zxr10ACLv4RulePshFlag, zxr10ACLv4RuleUrgFlag, zxr10ACLv4RuleTtlOpr, zxr10ACLv4RuleTtlValue, zxr10ACLv4RuleTtlRange, zxr10ACLv4RuleTimerangeName, zxr10ACLv4RuleSrcUrl, zxr10ACLv4RuleDestUrl, zxr10ACLv4RuleDescription, zxr10ACLv4RulePrecRange, zxr10ACLv4RuleDscpRange 4. rule type : udp type effective leaf nodes: zxr10ACLv4RuleAclName, zxr10ACLv4RuleRuleID, zxr10ACLv4RulePermitDeny, zxr10ACLv4RuleSrcAddr, zxr10ACLv4RuleSrcWildcard, zxr10ACLv4RuleDestAddr, zxr10ACLv4RuleDestWildcard, zxr10ACLv4RuleIpProtocol, zxr10ACLv4RuleSrcPortOpr, zxr10ACLv4RuleSrcPortValue, zxr10ACLv4RuleSrcPortRange, zxr10ACLv4RuleDestPortOpr, zxr10ACLv4RuleDestPortValue, zxr10ACLv4RuleDestPortRange, zxr10ACLv4RulePrecedence, zxr10ACLv4RuleTOS, zxr10ACLv4RuleDSCP, zxr10ACLv4RuleFragment, zxr10ACLv4RuleTtlOpr, zxr10ACLv4RuleTtlValue, zxr10ACLv4RuleTtlRange, zxr10ACLv4RuleTimerangeName, zxr10ACLv4RuleSrcUrl, zxr10ACLv4RuleDestUrl, zxr10ACLv4RuleDescription, zxr10ACLv4RulePrecRange, zxr10ACLv4RuleDscpRange 5. rule type : icmp type effective leaf nodes: zxr10ACLv4RuleAclName, zxr10ACLv4RuleRuleID, zxr10ACLv4RulePermitDeny, zxr10ACLv4RuleSrcAddr, zxr10ACLv4RuleSrcWildcard, zxr10ACLv4RuleDestAddr, zxr10ACLv4RuleDestWildcard, zxr10ACLv4RuleIpProtocol, zxr10ACLv4RuleICMPType, zxr10ACLv4RuleICMPCode, zxr10ACLv4RulePrecedence, zxr10ACLv4RuleTOS, zxr10ACLv4RuleDSCP, zxr10ACLv4RuleFragment, zxr10ACLv4RuleTtlOpr, zxr10ACLv4RuleTtlValue, zxr10ACLv4RuleTtlRange, zxr10ACLv4RuleTimerangeName, zxr10ACLv4RuleSrcUrl, zxr10ACLv4RuleDestUrl, zxr10ACLv4RuleDescription, zxr10ACLv4RulePrecRange, zxr10ACLv4RuleDscpRange conflict leaf nodes: 1. zxr10ACLv4RuleFragment conflicts with zxr10ACLv4RuleSrcPortOpr, zxr10ACLv4RuleSrcPortValue, zxr10ACLv4RuleSrcPortRange, zxr10ACLv4RuleDestPortOpr, zxr10ACLv4RuleDestPortValue, zxr10ACLv4RuleDestPortRange, zxr10ACLv4RuleTCPEstablish, zxr10ACLv4RuleICMPType, zxr10ACLv4RuleICMPCode, zxr10ACLv4RuleRstFlag, zxr10ACLv4RuleAckFlag, zxr10ACLv4RuleFinFlag, zxr10ACLv4RuleSynFlag, zxr10ACLv4RulePshFlag, zxr10ACLv4RuleUrgFlag, 2.These leaf nodes conflict with each other: zxr10ACLv4RulePrecedence, zxr10ACLv4RuleTOS, zxr10ACLv4RuleDSCP, zxr10ACLv4RulePrecRange, zxr10ACLv4RuleDscpRange 3.zxr10ACLv4RuleTCPEstablish conflicts with zxr10ACLv4RuleRstFlag, zxr10ACLv4RuleAckFlag, | |
| STR zxr10ACLv4RuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.1 | DisplayString | not-accessible | Name of an IPv4 access-list (1-31 characters) |
| I32 zxr10ACLv4RuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLv4RulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| IP zxr10ACLv4RuleSrcAddr | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.4 | IpAddress | read-only | A.B.C.D Source address |
| IP zxr10ACLv4RuleSrcWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.5 | IpAddress | read-only | A.B.C.D Wildcard bits |
| IP zxr10ACLv4RuleDestAddr | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.6 | IpAddress | read-only | A.B.C.D Destination address |
| IP zxr10ACLv4RuleDestWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.7 | IpAddress | read-only | A.B.C.D Destination wildcard bits |
| INT zxr10ACLv4RuleIpProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.8 | INTEGER | read-only | An IP protocol number std standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf Open Shortest Path First Protocol (89) pim Protocol Independent Multicast (103) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) sctp Stream Control Transmission Protocol (132) vrrp Virtual Router Redundancy Protocol (112) |
| INT zxr10ACLv4RuleSrcPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.9 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4RuleSrcPortValue and zxr10ACLv4RuleSrcPortRange When the value of zxr10ACLv4RuleSrcPortOpr is invalid(65535). Check zxr10ACLv4RuleSrcPortValue when the value zxr10ACLv4RuleSrcPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv4RuleSrcPortRange only when the value of zxr10ACLv4RuleSrcPortOpr is range(7). |
| INT zxr10ACLv4RuleSrcPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.10 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv4RuleSrcPortOpr is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4RuleSrcPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.11 | DisplayString | read-only | Port range: - Check zxr10ACLv4RuleSrcPortRange only when the value of zxr10ACLv4RuleSrcPortOpr is range(7). |
| INT zxr10ACLv4RuleDestPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.12 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4RuleDestPortValue and zxr10ACLv4RuleDestPortRange When the value of zxr10ACLv4RuleDestPortOpr is invalid(65535). Check zxr10ACLv4RuleDestPortValue when the value zxr10ACLv4RuleDestPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv4RuleDestPortRange only when the value of zxr10ACLv4RuleDestPortOpr is range(7). |
| INT zxr10ACLv4RuleDestPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.13 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv4RuleDestPortOpr is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4RuleDestPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.14 | DisplayString | read-only | Port range: - Check zxr10ACLv4RuleDestPortRange only when the value of zxr10ACLv4RuleDestPortOpr is range(7). |
| ACL zxr10ACLv4RuleTCPEstablish | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.15 | AclValidOrNot | read-only | Match established connections. This is an optional node. This node is conflict with zxr10ACLv4RuleAckFlag and zxr10ACLv4RuleRstFlag. |
| INT zxr10ACLv4RuleICMPType | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.16 | INTEGER | read-only | ICMP type: valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) information-request Information requests (15) parameter-problem All parameter problems (12) redirect All redirects (5) router-advertisement Router discovery advertisements (9) router-solicitation Router discovery solicitations (10) source-quench Source quenches (4) time-exceeded All time exceededs (11) timestamp-reply Timestamp replies (14) timestamp-request Timestamp requests (13) unreachable All unreachables (3) This is an optional node. |
| INT zxr10ACLv4RuleICMPCode | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.17 | INTEGER | read-only | ICMP code: valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv4RulePrecedence | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.18 | Integer32 | read-only | Precedence level: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4RuleTOS | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.19 | Integer32 | read-only | Type of service(ToS): valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4RuleDSCP | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.20 | Integer32 | read-only | DSCP value: valid value 255 invalid value This is an optional node. |
| ACL zxr10ACLv4RuleFragment | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.21 | AclValidOrNot | read-only | Fragment enable or disable flag. This is an optional node. |
| ACL zxr10ACLv4RuleRstFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.22 | AclTcpFlagType | read-only | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4RuleAckFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.23 | AclTcpFlagType | read-only | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4RuleFinFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.24 | AclTcpFlagType | read-only | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4RuleSynFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.25 | AclTcpFlagType | read-only | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4RulePshFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.26 | AclTcpFlagType | read-only | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4RuleUrgFlag | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.27 | AclTcpFlagType | read-only | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| INT zxr10ACLv4RuleTtlOpr | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28 | INTEGER | read-only | This is an optional node. eq Match only packets on a given ttl value ge Match only packets with a no lower ttl value le Match only packets with a no greater ttl value neq Match only packets with a no equeal ttl value range Match only packet on a given ttl value range 65535 invalid value Needn't care for zxr10ACLv4RuleTtlValue and zxr10ACLv4RuleTtlRange When the value of zxr10ACLv4RuleTtlOpr is invalid(65535). Check zxr10ACLv4RuleTtlValue when the value zxr10ACLv4RuleTtlOpr is eq(1),ge(2),le(3) or neq(6). Check zxr10ACLv4RuleTtlRange only when the value of zxr10ACLv4RuleTtlOpr is range(7). |
| I32 zxr10ACLv4RuleTtlValue | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.29 | Integer32 | read-only | The TTL value: valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is eq(1), ge(2),le(3) or neq(6). |
| STR zxr10ACLv4RuleTtlRange | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.30 | DisplayString | read-only | The TTL value Range: - valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is range(7). |
| STR zxr10ACLv4RuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.31 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| STR zxr10ACLv4RuleSrcUrl | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.32 | DisplayString | read-only | Source URL (1-95 characters) If source Url is configured, zxr10ACLv4RuleSrcAddr and zxr10ACLv4RuleSrcWildcard are invalid. |
| STR zxr10ACLv4RuleDestUrl | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.33 | DisplayString | read-only | Destination URL (1-95 characters) If Destination Url is configured, zxr10ACLv4RuleDestAddr and zxr10ACLv4RuleDestWildcard are invalid. |
| STR zxr10ACLv4RuleDescription | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.34 | DisplayString | read-only | Description for use (1-70 characters). |
| STR zxr10ACLv4RulePrecRange | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.35 | DisplayString | read-only | Precedence range: - Invalid value: 65535. |
| STR zxr10ACLv4RuleDscpRange | 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.36 | DisplayString | read-only | DSCP range: - Invalid value: 65535. |
| zxr10ACLv6Objects | 1.3.6.1.4.1.3902.3.6000.602.2.2 | |||
| zxr10ACLv6ListTable | 1.3.6.1.4.1.3902.3.6000.602.2.2.1 | not-accessible | IPv6 ACL Table | |
| zxr10ACLv6ListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.2.1.1 | not-accessible | IPv6 ACL | |
| STR zxr10ACLv6ListName | 1.3.6.1.4.1.3902.3.6000.602.2.2.1.1.1 | DisplayString | read-only | Name of an IPv6 access-list (1-31 characters) |
| zxr10ACLv6RuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.2.2 | not-accessible | IPv6 ACL Rule Table | |
| zxr10ACLv6RuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1 | not-accessible | IPv6 ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include ip type,tcp type,udp type,icmp type, represented by zxr10ACLv6RuleIpProtocol in this table. According to the rule type (zxr10ACLv6RuleIpProtocol), the following leaf nodes are effective. 1.rule type : ip type effective leaf nodes: zxr10ACLv6RuleAclName, zxr10ACLv6RuleRuleID, zxr10ACLv6RulePermitDeny, zxr10ACLv6Ruleflowlabel, zxr10ACLv6RuleSrcAddr, zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleDestAddr, zxr10ACLv6RuleDestWildcard, zxr10ACLv6RuleIpProtocol, zxr10ACLv6RuleRouting, zxr10ACLv6RuleAuthen, zxr10ACLv6RuleDestops, zxr10ACLv6RuleFragments, zxr10ACLv6RuleHopByHop, zxr10ACLv6RuleEsp, zxr10ACLv6RuleDSCP, zxr10ACLv6RuleTc, zxr10ACLv6RuleTimerangeName, zxr10ACLv6RuleSrcAddrMaskFlag, zxr10ACLv6RuleSrcWildcardBits, zxr10ACLv6RuleDestAddrMaskFlag, zxr10ACLv6RuleDestWildcardBits, zxr10ACLv6RuleDescription 2. rule type : tcp type effective leaf nodes: zxr10ACLv6RuleAclName, zxr10ACLv6RuleRuleID, zxr10ACLv6RulePermitDeny, zxr10ACLv6Ruleflowlabel, zxr10ACLv6RuleSrcAddr, zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleDestAddr, zxr10ACLv6RuleDestWildcard, zxr10ACLv6RuleIpProtocol, zxr10ACLv6RuleSrcPortOpr, zxr10ACLv6RuleSrcPortValue, zxr10ACLv6RuleSrcPortRange, zxr10ACLv6RuleDestPortOpr, zxr10ACLv6RuleDestPortValue, zxr10ACLv6RuleDestPortRange, zxr10ACLv6RuleTCPEstablish, zxr10ACLv6RuleRstFlag, zxr10ACLv6RuleAckFlag, zxr10ACLv6RuleFinFlag, zxr10ACLv6RuleSynFlag, zxr10ACLv6RulePshFlag, zxr10ACLv6RuleUrgFlag, zxr10ACLv6RuleRouting, zxr10ACLv6RuleAuthen, zxr10ACLv6RuleDestops, zxr10ACLv6RuleFragments, zxr10ACLv6RuleHopByHop, zxr10ACLv6RuleEsp, zxr10ACLv6RuleDSCP, zxr10ACLv6RuleTc, zxr10ACLv6RuleTimerangeName, zxr10ACLv6RuleSrcUrl, zxr10ACLv6RuleDestUrl, zxr10ACLv6RuleSrcAddrMaskFlag, zxr10ACLv6RuleSrcWildcardBits, zxr10ACLv6RuleDestAddrMaskFlag, zxr10ACLv6RuleDestWildcardBits, zxr10ACLv6RuleDescription 3.rule type : udp type effective leaf nodes: zxr10ACLv6RuleAclName, zxr10ACLv6RuleRuleID, zxr10ACLv6RulePermitDeny, zxr10ACLv6Ruleflowlabel, zxr10ACLv6RuleSrcAddr, zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleDestAddr, zxr10ACLv6RuleDestWildcard, zxr10ACLv6RuleIpProtocol, zxr10ACLv6RuleSrcPortOpr, zxr10ACLv6RuleSrcPortValue, zxr10ACLv6RuleSrcPortRange, zxr10ACLv6RuleDestPortOpr, zxr10ACLv6RuleDestPortValue, zxr10ACLv6RuleDestPortRange, zxr10ACLv6RuleRouting, zxr10ACLv6RuleAuthen, zxr10ACLv6RuleDestops, zxr10ACLv6RuleFragments, zxr10ACLv6RuleHopByHop, zxr10ACLv6RuleEsp, zxr10ACLv6RuleDSCP, zxr10ACLv6RuleTc, zxr10ACLv6RuleTimerangeName, zxr10ACLv6RuleSrcUrl, zxr10ACLv6RuleDestUrl, zxr10ACLv6RuleSrcAddrMaskFlag, zxr10ACLv6RuleSrcWildcardBits, zxr10ACLv6RuleDestAddrMaskFlag, zxr10ACLv6RuleDestWildcardBits, zxr10ACLv6RuleDescription 4.rule type : icmp type effective leaf nodes: zxr10ACLv6RuleAclName, zxr10ACLv6RuleRuleID, zxr10ACLv6RulePermitDeny, zxr10ACLv6Ruleflowlabel, zxr10ACLv6RuleSrcAddr, zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleDestAddr, zxr10ACLv6RuleDestWildcard, zxr10ACLv6RuleIpProtocol, zxr10ACLv6RuleICMPType, zxr10ACLv6RuleICMPCode, zxr10ACLv6RuleRouting, zxr10ACLv6RuleAuthen, zxr10ACLv6RuleDestops, zxr10ACLv6RuleFragments, zxr10ACLv6RuleHopByHop, zxr10ACLv6RuleEsp, zxr10ACLv6RuleDSCP, zxr10ACLv6RuleTc, zxr10ACLv6RuleTimerangeName, zxr10ACLv6RuleSrcUrl, zxr10ACLv6RuleDestUrl, zxr10ACLv6RuleSrcAddrMaskFlag, zxr10ACLv6RuleSrcWildcardBits, zxr10ACLv6RuleDestAddrMaskFlag, zxr10ACLv6RuleDestWildcardBits, zxr10ACLv6RuleDescription conflict leaf nodes: 1. zxr10ACLv6RuleFragments conflicts with zxr10ACLv6RuleSrcPortOpr, zxr10ACLv6RuleSrcPortValue, zxr10ACLv6RuleSrcPortRange, zxr10ACLv6RuleDestPortOpr, zxr10ACLv6RuleDestPortValue, zxr10ACLv6RuleDestPortRange, zxr10ACLv6RuleICMPType, zxr10ACLv6RuleICMPCode, zxr10ACLv6RuleTCPEstablish, zxr10ACLv6RuleRstFlag, zxr10ACLv6RuleAckFlag, zxr10ACLv6RuleFinFlag, zxr10ACLv6RuleSynFlag, zxr10ACLv6RulePshFlag, zxr10ACLv6RuleUrgFlag, 2. zxr10ACLv6RuleDSCP conflicts with zxr10ACLv6RuleTC 3. zxr10ACLv6RuleTCPEstablish conflicts with zxr10ACLv6RuleRstFlag, zxr10ACLv6RuleAckFlag | |
| STR zxr10ACLv6RuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.1 | DisplayString | not-accessible | Name of an IPv6 access-list (1-31 characters) |
| I32 zxr10ACLv6RuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLv6RulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| I32 zxr10ACLv6RuleFlowlabel | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.4 | Integer32 | read-only | Flowlabel value: valid value 2147483647 invalid value This is an optional node. |
| STR zxr10ACLv6RuleSrcAddr | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.5 | DisplayString | read-only | Source address |
| INT zxr10ACLv6RuleSrcWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.6 | INTEGER | read-only | Source Wildcard |
| STR zxr10ACLv6RuleDestAddr | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.7 | DisplayString | read-only | Destination address |
| INT zxr10ACLv6RuleDestWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.8 | INTEGER | read-only | Destination Wildcard |
| INT zxr10ACLv6RuleIpProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.9 | INTEGER | read-only | An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf Open Shortest Path First Protocol (89) pim Protocol Independent Multicast (103) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) sctp Stream Control Transmission Protocol (132) vrrp Virtual Router Redundancy Protocol (112) |
| INT zxr10ACLv6RuleSrcPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.10 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv6RuleSrcPortValue and zxr10ACLv6RuleSrcPortRange When the value of zxr10ACLv6RuleSrcPortOpr is invalid(65535). Check zxr10ACLv6RuleSrcPortValue when the value zxr10ACLv6RuleSrcPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv6RuleSrcPortRange only when the value of zxr10ACLv6RuleSrcPortOpr is range(7). |
| INT zxr10ACLv6RuleSrcPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.11 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv6RuleSrcPortOpr is eq(1), ge(2) or le(3). |
| STR zxr10ACLv6RuleSrcPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.12 | DisplayString | read-only | Port range: - Check zxr10ACLv6RuleSrcPortRange only when the value of zxr10ACLv6RuleSrcPortOpr is range(7). |
| INT zxr10ACLv6RuleDestPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.13 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv6RuleDestPortValue and zxr10ACLv6RuleDestPortRange When the value of zxr10ACLv6RuleDestPortOpr is invalid(65535). Check zxr10ACLv6RuleDestPortValue when the value zxr10ACLv6RuleDestPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv6RuleDestPortRange only when the value of zxr10ACLv6RuleDestPortOpr is range(7). |
| INT zxr10ACLv6RuleDestPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.14 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv6RuleDestPortOpr is eq(1), ge(2) or le(3). |
| STR zxr10ACLv6RuleDestPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.15 | DisplayString | read-only | Port range: - Check zxr10ACLv6RuleDestPortRange only when the value of zxr10ACLv6RuleDestPortOpr is range(7). |
| ACL zxr10ACLv6RuleTCPEstablish | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.16 | AclValidOrNot | read-only | Match established connections. This is an optional node. |
| ACL zxr10ACLv6RuleRstFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.17 | AclTcpFlagType | read-only | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6RuleAckFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.18 | AclTcpFlagType | read-only | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6RuleFinFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.19 | AclTcpFlagType | read-only | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6RuleSynFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.20 | AclTcpFlagType | read-only | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6RulePshFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.21 | AclTcpFlagType | read-only | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6RuleUrgFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.22 | AclTcpFlagType | read-only | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| INT zxr10ACLv6RuleICMPType | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.23 | INTEGER | read-only | ICMP type: valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Echo request (ping, 128) mld-query Multicast Listener Discovery Query (130) mld-reduction Multicast Listener Discovery Reduction (132) mld-report Multicast Listener Discovery Report (131) nd-na Neighbor discovery neighbor advertisments(136) nd-ns Neighbor discovery neighbor solicitations(135) packet-too-big Packet too big (2) parameter-problem All parameter problems (4) redirect Neighbor redirect (137) router-advertisment Neighbor discovery router advertisments(134) router-renumbering All router renumbering (138) router-solicitation Neighbor discovery router solicitations(133) time-exceeded Time exceeded (3) This is an optional node. |
| INT zxr10ACLv6RuleICMPCode | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.24 | INTEGER | read-only | ICMP code: valid value 65535 invalid value This is an optional node. |
| ACL zxr10ACLv6RuleRouting | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.25 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6RuleAuthen | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.26 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6RuleDestops | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.27 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6RuleFragments | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.28 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6RuleHopByHop | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.29 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6RuleEsp | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.30 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| I32 zxr10ACLv6RuleDSCP | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.31 | Integer32 | read-only | DSCP value: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv6RuleTc | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.32 | Integer32 | read-only | Traffic Class value: valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLv6RuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.33 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| STR zxr10ACLv6RuleSrcUrl | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.34 | DisplayString | read-only | Source URL (1-95 characters) If source Url is configured, zxr10ACLv6RuleSrcAddr and zxr10ACLv6RuleSrcWildcard are invalid. |
| STR zxr10ACLv6RuleDestUrl | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.35 | DisplayString | read-only | Destination URL (1-95 characters) If Destination Url is configured, zxr10ACLv6RuleDestAddr and zxr10ACLv6RuleDestWildcard are invalid. |
| ACL zxr10ACLv6RuleSrcAddrMaskFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.36 | AclValidOrNot | read-only | This flag indicates the way of configuring IPv6 source address mask, such as zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleSrcWildcardBits. If this flag is valid, IPv6 source address mask is configured by wildcard bits,(e.g. X:X::X:X) and zxr10ACLv6RuleSrcWildcardBits is valid; if not, IPv6 source address mask is configured by prefix length, (e.g. X:X::X:X/0-128) and zxr10ACLv6RuleSrcWildcard is valid. |
| ADR zxr10ACLv6RuleSrcWildcardBits | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.37 | Ipv6Address | read-only | Source address wildcard bits |
| ACL zxr10ACLv6RuleDestAddrMaskFlag | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.38 | AclValidOrNot | read-only | This flag indicates the way of configuring IPv6 destination address mask,such as zxr10ACLv6RuleDestWildcard,zxr10ACLv6RuleDestWildcardBits. If this flag is valid, IPv6 destination address mask is configured by wildcard bits, (e.g. X:X::X:X) and zxr10ACLv6RuleDestWildcardBits is valid; if not, IPv6 destination address mask is configured by prefix length, (e.g. X:X::X:X/0-128) and zxr10ACLv6RuleDestWildcard is valid. |
| ADR zxr10ACLv6RuleDestWildcardBits | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.39 | Ipv6Address | read-only | Destination address wildcard bits |
| STR zxr10ACLv6RuleDescription | 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.40 | DisplayString | read-only | Description for use (1-70 characters). |
| zxr10ACLLinkObjects | 1.3.6.1.4.1.3902.3.6000.602.2.3 | |||
| zxr10ACLLinkListTable | 1.3.6.1.4.1.3902.3.6000.602.2.3.1 | not-accessible | Link ACL | |
| zxr10ACLLinkListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.3.1.1 | not-accessible | Link ACL | |
| STR zxr10ACLLinkListName | 1.3.6.1.4.1.3902.3.6000.602.2.3.1.1.1 | DisplayString | read-only | Name of a link access-list (1-31 characters) |
| zxr10ACLLinkRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.3.2 | not-accessible | Link ACL Rule Table | |
| zxr10ACLLinkRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1 | not-accessible | Link ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLLinkRuleAclName, zxr10ACLLinkRuleRuleID, zxr10ACLLinkRulePermitDeny, zxr10ACLLinkRuleLinkProtocol, zxr10ACLLinkRuleSrcMAC, zxr10ACLLinkRuleSrcMACWildcard, zxr10ACLLinkRuleDestMAC, zxr10ACLLinkRuleDestMACWildcard, zxr10ACLLinkRuleIncos, zxr10ACLLinkRuleOutCos, zxr10ACLLinkRuleInVlanID, zxr10ACLLinkRuleOutVlanID, zxr10ACLLinkRuleInVlanRange, zxr10ACLLinkRuleOutVlanRange, zxr10ACLLinkRuleTimerangeName, zxr10ACLLinkRuleBSrcMACRange1, zxr10ACLLinkRuleSrcMACRg1Min, zxr10ACLLinkRuleSrcMACRg1Max, zxr10ACLLinkRuleBSrcMACRange2, zxr10ACLLinkRuleSrcMACRg2Min, zxr10ACLLinkRuleSrcMACRg2Max, zxr10ACLLinkRuleBDestMACRange1, zxr10ACLLinkRuleDestMACRg1Min, zxr10ACLLinkRuleDestMACRg1Max, zxr10ACLLinkRuleBDestMACRange2, zxr10ACLLinkRuleDestMACRg2Min, zxr10ACLLinkRuleDestMACRg2Max, zxr10ACLLinkRuleDescription, zxr10ACLLinkRuleLinkProtocolMask, zxr10ACLLinkRuleInCosRange, zxr10ACLLinkRuleOutCosRange, zxr10ACLLinkRuleDsap, zxr10ACLLinkRuleSsap conflict leaf nodes: 1. zxr10ACLLinkRuleLinkProtocol conflicts with zxr10ACLLinkRuleDsap, zxr10ACLLinkRuleSsap | |
| STR zxr10ACLLinkRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.1 | DisplayString | not-accessible | Name of a link access-list (1-31 characters) |
| I32 zxr10ACLLinkRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLLinkRulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| I32 zxr10ACLLinkRuleLinkProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.4 | Integer32 | read-only | Link protocal: valid value 65536 invalid value This is an optional node. |
| MAC zxr10ACLLinkRuleSrcMAC | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.5 | MacAddress | read-only | Source MAC address |
| MAC zxr10ACLLinkRuleSrcMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.6 | MacAddress | read-only | Source MAC wildcard |
| MAC zxr10ACLLinkRuleDestMAC | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.7 | MacAddress | read-only | Destination MAC address |
| MAC zxr10ACLLinkRuleDestMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.8 | MacAddress | read-only | Destination MAC wildcard |
| I32 zxr10ACLLinkRuleIncos | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.9 | Integer32 | read-only | Value of inner cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLLinkRuleOutCos | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.10 | Integer32 | read-only | Value of outer cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLLinkRuleInVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.11 | Integer32 | read-only | Value of inner vlan valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLLinkRuleOutVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.12 | Integer32 | read-only | Value of outer vlan valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLLinkRuleInVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.13 | DisplayString | read-only | Range of inner vlan - valid value 0 invalid value This is an optional node. |
| STR zxr10ACLLinkRuleOutVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.14 | DisplayString | read-only | Range of outer vlan - valid value 0 invalid value This is an optional node. |
| STR zxr10ACLLinkRuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.15 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| ACL zxr10ACLLinkRuleBSrcMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.16 | AclValidOrNot | read-only | Match if source MAC address range is configured. When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLinkRuleSrcMACRg1Min and zxr10ACLLinkRuleSrcMACRg1Max are valid. |
| MAC zxr10ACLLinkRuleSrcMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.17 | MacAddress | read-only | Lower limit of first source MAC address range |
| MAC zxr10ACLLinkRuleSrcMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.18 | MacAddress | read-only | Upper limit of first source MAC address range |
| ACL zxr10ACLLinkRuleBSrcMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.19 | AclValidOrNot | read-only | Match if second source MAC address range is configured. When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLinkRuleSrcMACRg2Min and zxr10ACLLinkRuleSrcMACRg2Max are valid. |
| MAC zxr10ACLLinkRuleSrcMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.20 | MacAddress | read-only | Lower limit of second source MAC address range |
| MAC zxr10ACLLinkRuleSrcMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.21 | MacAddress | read-only | Upper limit of second source MAC address range |
| ACL zxr10ACLLinkRuleBDestMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.22 | AclValidOrNot | read-only | Match if destination MAC address range is configured. When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10ACLLinkRuleDestMACRg1Min and zxr10ACLLinkRuleDestMACRg1Max are valid. |
| MAC zxr10ACLLinkRuleDestMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.23 | MacAddress | read-only | Lower limit of first destination MAC address range |
| MAC zxr10ACLLinkRuleDestMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.24 | MacAddress | read-only | Upper limit of first destination MAC address range |
| ACL zxr10ACLLinkRuleBDestMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.25 | AclValidOrNot | read-only | Match if second destination MAC address range is configured. When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10ACLLinkRuleDestMACRg2Min and zxr10ACLLinkRuleDestMACRg2Max are valid. |
| MAC zxr10ACLLinkRuleDestMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.26 | MacAddress | read-only | Lower limit of second destination MAC address range |
| MAC zxr10ACLLinkRuleDestMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.27 | MacAddress | read-only | Upper limit of second destination MAC address range |
| STR zxr10ACLLinkRuleDescription | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.28 | DisplayString | read-only | Description for use (1-70 characters). |
| U32 zxr10ACLLinkRuleLinkProtocolMask | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.29 | Unsigned32 | read-only | Link protocal mask: valid value 65536 invalid value This is an optional node. |
| STR zxr10ACLLinkRuleInCosRange | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.30 | DisplayString | read-only | Range of inner CoS: - valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLLinkRuleOutCosRange | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.31 | DisplayString | read-only | Range of outer CoS: - valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLLinkRuleDsap | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.32 | Integer32 | read-only | Destination service access point: valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLLinkRuleSsap | 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.33 | Integer32 | read-only | Source service access point: valid value 65535 invalid value This is an optional node. |
| zxr10ACLv4MixObjects | 1.3.6.1.4.1.3902.3.6000.602.2.4 | |||
| zxr10ACLv4MixListTable | 1.3.6.1.4.1.3902.3.6000.602.2.4.1 | not-accessible | IPv4 Mixed ACL Table | |
| zxr10ACLv4MixListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.4.1.1 | not-accessible | IPv4Mix ACL | |
| STR zxr10ACLv4MixListName | 1.3.6.1.4.1.3902.3.6000.602.2.4.1.1.1 | DisplayString | read-only | Name of an IPv4 mixed access-list (1-31 characters) |
| zxr10ACLv4MixRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.4.2 | not-accessible | IPv4 Mixed ACL Rule Table | |
| zxr10ACLv4MixRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1 | not-accessible | IPv4Mix ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type, ip type, tcp type, udp type ,icmp type , represented by zxr10ACLv4RuleIpProtocol in this table. According to the rule type (zxr10ACLv4MixRuleIpProtocol) , the following leaf nodes are effective. 1. rule type : std type effective leaf nodes: zxr10ACLv4MixRuleAclName, zxr10ACLv4MixRuleRuleID, zxr10ACLv4MixRulePermitDeny, zxr10ACLv4MixRuleLinkProtocol, zxr10ACLv4MixRuleSrcMAC, zxr10ACLv4MixRuleSrcMACWildcard, zxr10ACLv4MixRuleDestMAC, zxr10ACLv4MixRuleDestMACWildcard, zxr10ACLv4MixRuleIncos, zxr10ACLv4MixRuleOutCos, zxr10ACLv4MixRuleInVlanID, zxr10ACLv4MixRuleOutVlanID, zxr10ACLv4MixRuleInVlanRange, zxr10ACLv4MixRuleOutVlanRange, zxr10ACLv4MixRuleSrcAddr, zxr10ACLv4MixRuleSrcWildcard, zxr10ACLv4MixRuleTimerangeName, zxr10ACLv4MixRuleBSrcMACRange1, zxr10ACLv4MixRuleSrcMACRg1Min, zxr10ACLv4MixRuleSrcMACRg1Max, zxr10ACLv4MixRuleBSrcMACRange2, zxr10ACLv4MixRuleSrcMACRg2Min, zxr10ACLv4MixRuleSrcMACRg2Max, zxr10ACLv4MixRuleBDestMACRange1, zxr10ACLv4MixRuleDestMACRg1Min, zxr10ACLv4MixRuleDestMACRg1Max, zxr10ACLv4MixRuleBDestMACRange2, zxr10ACLv4MixRuleDestMACRg2Min, zxr10ACLv4MixRuleDestMACRg2Max, zxr10ACLv4MixRuleLinkProtocolEx zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap 2. rule type : ip type effective leaf nodes: zxr10ACLv4MixRuleAclName, zxr10ACLv4MixRuleRuleID, zxr10ACLv4MixRulePermitDeny, zxr10ACLv4MixRuleLinkProtocol, zxr10ACLv4MixRuleSrcMAC, zxr10ACLv4MixRuleSrcMACWildcard, zxr10ACLv4MixRuleDestMAC, zxr10ACLv4MixRuleDestMACWildcard, zxr10ACLv4MixRuleIncos, zxr10ACLv4MixRuleOutCos, zxr10ACLv4MixRuleInVlanID, zxr10ACLv4MixRuleOutVlanID, zxr10ACLv4MixRuleInVlanRange, zxr10ACLv4MixRuleOutVlanRange, zxr10ACLv4MixRuleSrcAddr, zxr10ACLv4MixRuleSrcWildcard, zxr10ACLv4MixRuleDestAddr, zxr10ACLv4MixRuleDestWildcard, zxr10ACLv4MixRuleIpProtocol, zxr10ACLv4MixRulePrecedence, zxr10ACLv4MixRuleTOS, zxr10ACLv4MixRuleDSCP, zxr10ACLv4MixRuleFragment, zxr10ACLv4MixRuleTimerangeName, zxr10ACLv4MixRuleBSrcMACRange1, zxr10ACLv4MixRuleSrcMACRg1Min, zxr10ACLv4MixRuleSrcMACRg1Max, zxr10ACLv4MixRuleBSrcMACRange2, zxr10ACLv4MixRuleSrcMACRg2Min, zxr10ACLv4MixRuleSrcMACRg2Max, zxr10ACLv4MixRuleBDestMACRange1, zxr10ACLv4MixRuleDestMACRg1Min, zxr10ACLv4MixRuleDestMACRg1Max, zxr10ACLv4MixRuleBDestMACRange2, zxr10ACLv4MixRuleDestMACRg2Min, zxr10ACLv4MixRuleDestMACRg2Max, zxr10ACLv4MixRuleLinkProtocolEx zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap 3. rule type : tcp type effective leaf nodes: zxr10ACLv4MixRuleAclName, zxr10ACLv4MixRuleRuleID, zxr10ACLv4MixRulePermitDeny, zxr10ACLv4MixRuleLinkProtocol, zxr10ACLv4MixRuleSrcMAC, zxr10ACLv4MixRuleSrcMACWildcard, zxr10ACLv4MixRuleDestMAC, zxr10ACLv4MixRuleDestMACWildcard, zxr10ACLv4MixRuleIncos, zxr10ACLv4MixRuleOutCos, zxr10ACLv4MixRuleInVlanID, zxr10ACLv4MixRuleOutVlanID, zxr10ACLv4MixRuleInVlanRange, zxr10ACLv4MixRuleOutVlanRange, zxr10ACLv4MixRuleSrcAddr, zxr10ACLv4MixRuleSrcWildcard, zxr10ACLv4MixRuleDestAddr, zxr10ACLv4MixRuleDestWildcard, zxr10ACLv4MixRuleIpProtocol, zxr10ACLv4MixRuleSrcPortOpr, zxr10ACLv4MixRuleSrcPortValue, zxr10ACLv4MixRuleSrcPortRange, zxr10ACLv4MixRuleDestPortOpr, zxr10ACLv4MixRuleDestPortValue, zxr10ACLv4MixRuleDestPortRange, zxr10ACLv4MixRuleTCPEstablish, zxr10ACLv4MixRulePrecedence, zxr10ACLv4MixRuleTOS, zxr10ACLv4MixRuleDSCP, zxr10ACLv4MixRuleFragment, zxr10ACLv4MixRuleRstFlag, zxr10ACLv4MixRuleAckFlag, zxr10ACLv4MixRuleFinFlag, zxr10ACLv4MixRuleSynFlag, zxr10ACLv4MixRulePshFlag, zxr10ACLv4MixRuleUrgFlag, zxr10ACLv4MixRuleTimerangeName, zxr10ACLv4MixRuleBSrcMACRange1, zxr10ACLv4MixRuleSrcMACRg1Min, zxr10ACLv4MixRuleSrcMACRg1Max, zxr10ACLv4MixRuleBSrcMACRange2, zxr10ACLv4MixRuleSrcMACRg2Min, zxr10ACLv4MixRuleSrcMACRg2Max, zxr10ACLv4MixRuleBDestMACRange1, zxr10ACLv4MixRuleDestMACRg1Min, zxr10ACLv4MixRuleDestMACRg1Max, zxr10ACLv4MixRuleBDestMACRange2, zxr10ACLv4MixRuleDestMACRg2Min, zxr10ACLv4MixRuleDestMACRg2Max, zxr10ACLv4MixRuleLinkProtocolEx zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap 4. rule type : ucp type effective leaf nodes: zxr10ACLv4MixRuleAclName, zxr10ACLv4MixRuleRuleID, zxr10ACLv4MixRulePermitDeny, zxr10ACLv4MixRuleLinkProtocol, zxr10ACLv4MixRuleSrcMAC, zxr10ACLv4MixRuleSrcMACWildcard, zxr10ACLv4MixRuleDestMAC, zxr10ACLv4MixRuleDestMACWildcard, zxr10ACLv4MixRuleIncos, zxr10ACLv4MixRuleOutCos, zxr10ACLv4MixRuleInVlanID, zxr10ACLv4MixRuleOutVlanID, zxr10ACLv4MixRuleInVlanRange, zxr10ACLv4MixRuleOutVlanRange, zxr10ACLv4MixRuleSrcAddr, zxr10ACLv4MixRuleSrcWildcard, zxr10ACLv4MixRuleDestAddr, zxr10ACLv4MixRuleDestWildcard, zxr10ACLv4MixRuleIpProtocol, zxr10ACLv4MixRuleSrcPortOpr, zxr10ACLv4MixRuleSrcPortValue, zxr10ACLv4MixRuleSrcPortRange, zxr10ACLv4MixRuleDestPortOpr, zxr10ACLv4MixRuleDestPortValue, zxr10ACLv4MixRuleDestPortRange, zxr10ACLv4MixRulePrecedence, zxr10ACLv4MixRuleTOS, zxr10ACLv4MixRuleDSCP, zxr10ACLv4MixRuleFragment, zxr10ACLv4MixRuleTimerangeName, zxr10ACLv4MixRuleBSrcMACRange1, zxr10ACLv4MixRuleSrcMACRg1Min, zxr10ACLv4MixRuleSrcMACRg1Max, zxr10ACLv4MixRuleBSrcMACRange2, zxr10ACLv4MixRuleSrcMACRg2Min, zxr10ACLv4MixRuleSrcMACRg2Max, zxr10ACLv4MixRuleBDestMACRange1, zxr10ACLv4MixRuleDestMACRg1Min, zxr10ACLv4MixRuleDestMACRg1Max, zxr10ACLv4MixRuleBDestMACRange2, zxr10ACLv4MixRuleDestMACRg2Min, zxr10ACLv4MixRuleDestMACRg2Max, zxr10ACLv4MixRuleLinkProtocolEx zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap 5. rule type : icmp type effective leaf nodes: zxr10ACLv4MixRuleAclName, zxr10ACLv4MixRuleRuleID, zxr10ACLv4MixRulePermitDeny, zxr10ACLv4MixRuleLinkProtocol, zxr10ACLv4MixRuleSrcMAC, zxr10ACLv4MixRuleSrcMACWildcard, zxr10ACLv4MixRuleDestMAC, zxr10ACLv4MixRuleDestMACWildcard, zxr10ACLv4MixRuleIncos, zxr10ACLv4MixRuleOutCos, zxr10ACLv4MixRuleInVlanID, zxr10ACLv4MixRuleOutVlanID, zxr10ACLv4MixRuleInVlanRange, zxr10ACLv4MixRuleOutVlanRange, zxr10ACLv4MixRuleSrcAddr, zxr10ACLv4MixRuleSrcWildcard, zxr10ACLv4MixRuleDestAddr, zxr10ACLv4MixRuleDestWildcard, zxr10ACLv4MixRuleIpProtocol, zxr10ACLv4MixRuleICMPType, zxr10ACLv4MixRuleICMPCode, zxr10ACLv4MixRulePrecedence, zxr10ACLv4MixRuleTOS, zxr10ACLv4MixRuleDSCP, zxr10ACLv4MixRuleFragment, zxr10ACLv4MixRuleTimerangeName, zxr10ACLv4MixRuleBSrcMACRange1, zxr10ACLv4MixRuleSrcMACRg1Min, zxr10ACLv4MixRuleSrcMACRg1Max, zxr10ACLv4MixRuleBSrcMACRange2, zxr10ACLv4MixRuleSrcMACRg2Min, zxr10ACLv4MixRuleSrcMACRg2Max, zxr10ACLv4MixRuleBDestMACRange1, zxr10ACLv4MixRuleDestMACRg1Min, zxr10ACLv4MixRuleDestMACRg1Max, zxr10ACLv4MixRuleBDestMACRange2, zxr10ACLv4MixRuleDestMACRg2Min, zxr10ACLv4MixRuleDestMACRg2Max, zxr10ACLv4MixRuleLinkProtocolEx, zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap conflict leaf nodes: 1. zxr10ACLv4MixRuleFragment conflicts with zxr10ACLv4MixRuleSrcPortOpr, zxr10ACLv4MixRuleSrcPortValue, zxr10ACLv4MixRuleSrcPortRange, zxr10ACLv4MixRuleDestPortOpr, zxr10ACLv4MixRuleDestPortValue, zxr10ACLv4MixRuleDestPortRange, zxr10ACLv4MixRuleTCPEstablish, zxr10ACLv4MixRuleICMPType, zxr10ACLv4MixRuleICMPCode, zxr10ACLv4MixRuleRstFlag, zxr10ACLv4MixRuleAckFlag, zxr10ACLv4MixRuleFinFlag, zxr10ACLv4MixRuleSynFlag, zxr10ACLv4MixRulePshFlag, zxr10ACLv4MixRuleUrgFlag 2. These leaf nodes conflict with each other: zxr10ACLv4MixRulePrecedence, zxr10ACLv4MixRuleTOS, zxr10ACLv4MixRuleDSCP 3. zxr10ACLv4MixRuleTCPEstablish conflicts with zxr10ACLv4MixRuleRstFlag, zxr10ACLv4MixRuleAckFlag 4. zxr10ACLv4MixRuleLinkProtocolEx conflicts with zxr10ACLv4MixRuleDsap, zxr10ACLv4MixRuleSsap | |
| STR zxr10ACLv4MixRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.1 | DisplayString | not-accessible | Name of an IPv4 mixed access-list (1-31 characters) |
| I32 zxr10ACLv4MixRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLv4MixRulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| I32 zxr10ACLv4MixRuleLinkProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.4 | Integer32 | read-only | Link protocal: valid value 65536 invalid value This is an optional node. |
| MAC zxr10ACLv4MixRuleSrcMAC | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.5 | MacAddress | read-only | Source MAC address |
| MAC zxr10ACLv4MixRuleSrcMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.6 | MacAddress | read-only | Source MAC wildcard |
| MAC zxr10ACLv4MixRuleDestMAC | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.7 | MacAddress | read-only | Destination MAC address |
| MAC zxr10ACLv4MixRuleDestMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.8 | MacAddress | read-only | Destination MAC wildcard |
| I32 zxr10ACLv4MixRuleIncos | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.9 | Integer32 | read-only | Value of inner cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleOutCos | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.10 | Integer32 | read-only | Value of outer cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleInVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.11 | Integer32 | read-only | Value of inner vlan valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleOutVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.12 | Integer32 | read-only | Value of outer vlan valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLv4MixRuleInVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.13 | DisplayString | read-only | Range of inner vlan - valid value 0 invalid value This is an optional node. |
| STR zxr10ACLv4MixRuleOutVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.14 | DisplayString | read-only | Range of outer vlan - valid value 0 invalid value This is an optional node. |
| IP zxr10ACLv4MixRuleSrcAddr | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.15 | IpAddress | read-only | A.B.C.D Source address |
| IP zxr10ACLv4MixRuleSrcWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.16 | IpAddress | read-only | A.B.C.D Wildcard bits |
| IP zxr10ACLv4MixRuleDestAddr | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.17 | IpAddress | read-only | A.B.C.D Destination address |
| IP zxr10ACLv4MixRuleDestWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.18 | IpAddress | read-only | A.B.C.D Destination wildcard bits |
| INT zxr10ACLv4MixRuleIpProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.19 | INTEGER | read-only | An IP protocol number std Standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf Open Shortest Path First Protocol (89) pim Protocol Independent Multicast (103) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) sctp Stream Control Transmission Protocol (132) vrrp Virtual Router Redundancy Protocol (112) |
| INT zxr10ACLv4MixRuleSrcPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.20 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4MixRuleSrcPortValue and zxr10ACLv4MixRuleSrcPortRange When the value of zxr10ACLv4MixRuleSrcPortOpr is invalid(65535). Check zxr10ACLv4MixRuleSrcPortValue when the value zxr10ACLv4MixRuleSrcPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv4MixRuleSrcPortRange only when the value of zxr10ACLv4MixRuleSrcPortOpr is range(7). |
| INT zxr10ACLv4MixRuleSrcPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.21 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv4MixRuleSrcPortOpr is eq(1), ge(2) or le(3). |
| STR zxr10ACLv4MixRuleSrcPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.22 | DisplayString | read-only | Port range: - Check zxr10ACLv4MixRuleSrcPortRange only when the value of zxr10ACLv4MixRuleSrcPortOpr is range(7). |
| INT zxr10ACLv4MixRuleDestPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4MixRuleDestPortValue and zxr10ACLv4MixRuleDestPortRange When the value of zxr10ACLv4MixRuleDestPortOpr is invalid(65535). Check zxr10ACLv4MixRuleDestPortValue when the value zxr10ACLv4MixRuleDestPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv4MixRuleDestPortRange only when the value of zxr10ACLv4MixRuleDestPortOpr is range(7). |
| INT zxr10ACLv4MixRuleDestPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.24 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv4MixRuleDestPortOpr is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4MixRuleDestPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.25 | DisplayString | read-only | Port range: - Check zxr10ACLv4MixRuleDestPortRange only when the value of zxr10ACLv4MixRuleDestPortOpr is range(7). |
| ACL zxr10ACLv4MixRuleTCPEstablish | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.26 | AclValidOrNot | read-only | Match established connections. This is an optional node. |
| INT zxr10ACLv4MixRuleICMPType | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.27 | INTEGER | read-only | ICMP type: valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) information-request Information requests (15) parameter-problem All parameter problems (12) redirect All redirects (5) router-advertisement Router discovery advertisements (9) router-solicitation Router discovery solicitations (10) source-quench Source quenches (4) time-exceeded All time exceededs (11) timestamp-reply Timestamp replies (14) timestamp-request Timestamp requests (13) unreachable All unreachables (3) This is an optional node. |
| INT zxr10ACLv4MixRuleICMPCode | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.28 | INTEGER | read-only | ICMP code: valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRulePrecedence | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.29 | Integer32 | read-only | Precedence level: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleTOS | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.30 | Integer32 | read-only | Type of service(ToS): valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleDSCP | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.31 | Integer32 | read-only | DSCP value: valid value 255 invalid value This is an optional node. |
| ACL zxr10ACLv4MixRuleFragment | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.32 | AclValidOrNot | read-only | Fragment enable or disable flag. This is an optional node. |
| ACL zxr10ACLv4MixRuleRstFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.33 | AclTcpFlagType | read-only | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4MixRuleAckFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.34 | AclTcpFlagType | read-only | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4MixRuleFinFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.35 | AclTcpFlagType | read-only | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4MixRuleSynFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.36 | AclTcpFlagType | read-only | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4MixRulePshFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.37 | AclTcpFlagType | read-only | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv4MixRuleUrgFlag | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.38 | AclTcpFlagType | read-only | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| STR zxr10ACLv4MixRuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.39 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| ACL zxr10ACLv4MixRuleBSrcMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.40 | AclValidOrNot | read-only | Match if source MAC address range is configured. When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4MixRuleSrcMACRg1Min and zxr10ACLv4MixRuleSrcMACRg1Max are valid. |
| MAC zxr10ACLv4MixRuleSrcMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.41 | MacAddress | read-only | Lower limit of first source MAC address range |
| MAC zxr10ACLv4MixRuleSrcMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.42 | MacAddress | read-only | Upper limit of first source MAC address range |
| ACL zxr10ACLv4MixRuleBSrcMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.43 | AclValidOrNot | read-only | Match if second source MAC address range is configured. When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4MixRuleSrcMACRg2Min and zxr10ACLv4MixRuleSrcMACRg2Max are valid. |
| MAC zxr10ACLv4MixRuleSrcMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.44 | MacAddress | read-only | Lower limit of second source MAC address range |
| MAC zxr10ACLv4MixRuleSrcMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.45 | MacAddress | read-only | Upper limit of second source MAC address range |
| ACL zxr10ACLv4MixRuleBDestMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.46 | AclValidOrNot | read-only | Match if destination MAC address range is configured. When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr10ACLv4MixRuleDestMACRg1Min and zxr10ACLv4MixRuleDestMACRg1Max are valid. |
| MAC zxr10ACLv4MixRuleDestMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.47 | MacAddress | read-only | Lower limit of first destination MAC address range |
| MAC zxr10ACLv4MixRuleDestMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.48 | MacAddress | read-only | Upper limit of first destination MAC address range |
| ACL zxr10ACLv4MixRuleBDestMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.49 | AclValidOrNot | read-only | Match if second destination MAC address range is configured. When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr10ACLv4MixRuleDestMACRg2Min and zxr10ACLv4MixRuleDestMACRg2Max are valid. |
| MAC zxr10ACLv4MixRuleDestMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.50 | MacAddress | read-only | Lower limit of second destination MAC address range |
| MAC zxr10ACLv4MixRuleDestMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.51 | MacAddress | read-only | Upper limit of second destination MAC address range |
| I32 zxr10ACLv4MixRuleLinkProtocolEx | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.52 | Integer32 | read-only | Link protocal: valid value 65536 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleDsap | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.53 | Integer32 | read-only | Destination service access point: valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv4MixRuleSsap | 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.54 | Integer32 | read-only | Source service access point: valid value 65535 invalid value This is an optional node. |
| zxr10ACLv6MixObjects | 1.3.6.1.4.1.3902.3.6000.602.2.5 | |||
| zxr10ACLv6MixListTable | 1.3.6.1.4.1.3902.3.6000.602.2.5.1 | not-accessible | IPv6 Mixed ACL Table | |
| zxr10ACLv6MixListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.5.1.1 | not-accessible | IPv6 Mixed ACL | |
| STR zxr10ACLv6MixListName | 1.3.6.1.4.1.3902.3.6000.602.2.5.1.1.1 | DisplayString | read-only | Name of an IPv6 Mixed access-list (1-31 characters) |
| zxr10ACLv6MixRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.5.2 | not-accessible | IPv6 Mixed ACL Rule Table | |
| zxr10ACLv6MixRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1 | not-accessible | IPv6 Mixed ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type, ip type, tcp type, udp type ,icmp type , represented by zxr10ACLv4RuleIpProtocol in this table. According to the rule type (zxr10ACLv6MixRuleIpProtocol), the following leaf nodes are effective. 1. rule type : ip type effective leaf nodes:zxr10ACLv6MixRuleAclName, zxr10ACLv6MixRuleRuleID, zxr10ACLv6MixRulePermitDeny, zxr10ACLv6MixRuleLinkProtocol, zxr10ACLv6MixRuleSrcMAC, zxr10ACLv6MixRuleSrcMACWildcard, zxr10ACLv6MixRuleDestMAC, zxr10ACLv6MixRuleDestMACWildcard, zxr10ACLv6MixRuleIncos, zxr10ACLv6MixRuleOutCos, zxr10ACLv6MixRuleInVlanID, zxr10ACLv6MixRuleOutVlanID, zxr10ACLv6MixRuleInVlanRange, zxr10ACLv6MixRuleOutVlanRange, zxr10ACLv6MixRuleFlowlabel, zxr10ACLv6MixRuleSrcAddr, zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleDestAddr, zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleIpProtocol, zxr10ACLv6MixRuleRouting, zxr10ACLv6MixRuleAuthen, zxr10ACLv6MixRuleDestops, zxr10ACLv6MixRuleFragments, zxr10ACLv6MixRuleHopByHop, zxr10ACLv6MixRuleEsp, zxr10ACLv6MixRuleDSCP, zxr10ACLv6MixRuleTc, zxr10ACLv6MixRuleTimerangeName, zxr10ACLv6MixRuleBSrcMACRange1, zxr10ACLv6MixRuleSrcMACRg1Min, zxr10ACLv6MixRuleSrcMACRg1Max, zxr10ACLv6MixRuleBSrcMACRange2, zxr10ACLv6MixRuleSrcMACRg2Min, zxr10ACLv6MixRuleSrcMACRg2Max, zxr10ACLv6MixRuleBDestMACRange1, zxr10ACLv6MixRuleDestMACRg1Min, zxr10ACLv6MixRuleDestMACRg1Max, zxr10ACLv6MixRuleBDestMACRange2, zxr10ACLv6MixRuleDestMACRg2Min, zxr10ACLv6MixRuleDestMACRg2Max, zxr10ACLv6MixRuleLinkProtocolEx, zxr10ACLv6MixRuleSrcAddrMaskFlag, zxr10ACLv6MixRuleSrcWildcardBits, zxr10ACLv6MixRuleDstAddrMaskFlag, zxr10ACLv6MixRuleDstWildcardBits, zxr10ACLv6MixRuleDsap, zxr10ACLv6MixRuleSsap 2. rule type : tcp type effective leaf nodes:zxr10ACLv6MixRuleAclName, zxr10ACLv6MixRuleRuleID, zxr10ACLv6MixRulePermitDeny, zxr10ACLv6MixRuleLinkProtocol, zxr10ACLv6MixRuleSrcMAC, zxr10ACLv6MixRuleSrcMACWildcard, zxr10ACLv6MixRuleDestMAC, zxr10ACLv6MixRuleDestMACWildcard, zxr10ACLv6MixRuleIncos, zxr10ACLv6MixRuleOutCos, zxr10ACLv6MixRuleInVlanID, zxr10ACLv6MixRuleOutVlanID, zxr10ACLv6MixRuleInVlanRange, zxr10ACLv6MixRuleOutVlanRange, zxr10ACLv6MixRuleFlowlabel, zxr10ACLv6MixRuleSrcAddr, zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleDestAddr, zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleIpProtocol, zxr10ACLv6MixRuleSrcPortOpr, zxr10ACLv6MixRuleSrcPortValue, zxr10ACLv6MixRuleSrcPortRange, zxr10ACLv6MixRuleDestPortOpr, zxr10ACLv6MixRuleDestPortValue, zxr10ACLv6MixRuleDestPortRange, zxr10ACLv6MixRuleTCPEstablish, zxr10ACLv6MixRuleRstFlag, zxr10ACLv6MixRuleAckFlag, zxr10ACLv6MixRuleFinFlag, zxr10ACLv6MixRuleSynFlag, zxr10ACLv6MixRulePshFlag, zxr10ACLv6MixRuleUrgFlag, zxr10ACLv6MixRuleRouting, zxr10ACLv6MixRuleAuthen, zxr10ACLv6MixRuleDestops, zxr10ACLv6MixRuleFragments, zxr10ACLv6MixRuleHopByHop, zxr10ACLv6MixRuleEsp, zxr10ACLv6MixRuleDSCP, zxr10ACLv6MixRuleTc, zxr10ACLv6MixRuleTimerangeName, zxr10ACLv6MixRuleBSrcMACRange1, zxr10ACLv6MixRuleSrcMACRg1Min, zxr10ACLv6MixRuleSrcMACRg1Max, zxr10ACLv6MixRuleBSrcMACRange2, zxr10ACLv6MixRuleSrcMACRg2Min, zxr10ACLv6MixRuleSrcMACRg2Max, zxr10ACLv6MixRuleBDestMACRange1, zxr10ACLv6MixRuleDestMACRg1Min, zxr10ACLv6MixRuleDestMACRg1Max, zxr10ACLv6MixRuleBDestMACRange2, zxr10ACLv6MixRuleDestMACRg2Min, zxr10ACLv6MixRuleDestMACRg2Max, zxr10ACLv6MixRuleSrcAddrMaskFlag, zxr10ACLv6MixRuleSrcWildcardBits, zxr10ACLv6MixRuleDstAddrMaskFlag, zxr10ACLv6MixRuleDstWildcardBits zxr10ACLv6MixRuleDsap, zxr10ACLv6MixRuleSsap 3. rule type : udp type effective leaf nodes:zxr10ACLv6MixRuleAclName, zxr10ACLv6MixRuleRuleID, zxr10ACLv6MixRulePermitDeny, zxr10ACLv6MixRuleLinkProtocol, zxr10ACLv6MixRuleSrcMAC, zxr10ACLv6MixRuleSrcMACWildcard, zxr10ACLv6MixRuleDestMAC, zxr10ACLv6MixRuleDestMACWildcard, zxr10ACLv6MixRuleIncos, zxr10ACLv6MixRuleOutCos, zxr10ACLv6MixRuleInVlanID, zxr10ACLv6MixRuleOutVlanID, zxr10ACLv6MixRuleInVlanRange, zxr10ACLv6MixRuleOutVlanRange, zxr10ACLv6MixRuleFlowlabel, zxr10ACLv6MixRuleSrcAddr, zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleDestAddr, zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleIpProtocol, zxr10ACLv6MixRuleSrcPortOpr, zxr10ACLv6MixRuleSrcPortValue, zxr10ACLv6MixRuleSrcPortRange, zxr10ACLv6MixRuleDestPortOpr, zxr10ACLv6MixRuleDestPortValue, zxr10ACLv6MixRuleDestPortRange, zxr10ACLv6MixRuleRouting, zxr10ACLv6MixRuleAuthen, zxr10ACLv6MixRuleDestops, zxr10ACLv6MixRuleFragments, zxr10ACLv6MixRuleHopByHop, zxr10ACLv6MixRuleEsp, zxr10ACLv6MixRuleDSCP, zxr10ACLv6MixRuleTc, zxr10ACLv6MixRuleTimerangeName, zxr10ACLv6MixRuleBSrcMACRange1, zxr10ACLv6MixRuleSrcMACRg1Min, zxr10ACLv6MixRuleSrcMACRg1Max, zxr10ACLv6MixRuleBSrcMACRange2, zxr10ACLv6MixRuleSrcMACRg2Min, zxr10ACLv6MixRuleSrcMACRg2Max, zxr10ACLv6MixRuleBDestMACRange1, zxr10ACLv6MixRuleDestMACRg1Min, zxr10ACLv6MixRuleDestMACRg1Max, zxr10ACLv6MixRuleBDestMACRange2, zxr10ACLv6MixRuleDestMACRg2Min, zxr10ACLv6MixRuleDestMACRg2Max, zxr10ACLv6MixRuleLinkProtocolEx, zxr10ACLv6MixRuleSrcAddrMaskFlag, zxr10ACLv6MixRuleSrcWildcardBits, zxr10ACLv6MixRuleDstAddrMaskFlag, zxr10ACLv6MixRuleDstWildcardBits zxr10ACLv6MixRuleDsap, zxr10ACLv6MixRuleSsap 4. rule type : icmp type effective leaf nodes:zxr10ACLv6MixRuleAclName, zxr10ACLv6MixRuleRuleID, zxr10ACLv6MixRulePermitDeny, zxr10ACLv6MixRuleLinkProtocol, zxr10ACLv6MixRuleSrcMAC, zxr10ACLv6MixRuleSrcMACWildcard, zxr10ACLv6MixRuleDestMAC, zxr10ACLv6MixRuleDestMACWildcard, zxr10ACLv6MixRuleIncos, zxr10ACLv6MixRuleOutCos, zxr10ACLv6MixRuleInVlanID, zxr10ACLv6MixRuleOutVlanID, zxr10ACLv6MixRuleInVlanRange, zxr10ACLv6MixRuleOutVlanRange, zxr10ACLv6MixRuleFlowlabel, zxr10ACLv6MixRuleSrcAddr, zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleDestAddr, zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleIpProtocol, zxr10ACLv6MixRuleICMPType, zxr10ACLv6MixRuleICMPCode, zxr10ACLv6MixRuleRouting, zxr10ACLv6MixRuleAuthen, zxr10ACLv6MixRuleDestops, zxr10ACLv6MixRuleFragments, zxr10ACLv6MixRuleHopByHop, zxr10ACLv6MixRuleEsp, zxr10ACLv6MixRuleDSCP, zxr10ACLv6MixRuleTc, zxr10ACLv6MixRuleTimerangeName, zxr10ACLv6MixRuleBSrcMACRange1, zxr10ACLv6MixRuleSrcMACRg1Min, zxr10ACLv6MixRuleSrcMACRg1Max, zxr10ACLv6MixRuleBSrcMACRange2, zxr10ACLv6MixRuleSrcMACRg2Min, zxr10ACLv6MixRuleSrcMACRg2Max, zxr10ACLv6MixRuleBDestMACRange1, zxr10ACLv6MixRuleDestMACRg1Min, zxr10ACLv6MixRuleDestMACRg1Max, zxr10ACLv6MixRuleBDestMACRange2, zxr10ACLv6MixRuleDestMACRg2Min, zxr10ACLv6MixRuleDestMACRg2Max, zxr10ACLv6MixRuleLinkProtocolEx, zxr10ACLv6MixRuleSrcAddrMaskFlag, zxr10ACLv6MixRuleSrcWildcardBits, zxr10ACLv6MixRuleDstAddrMaskFlag, zxr10ACLv6MixRuleDstWildcardBits zxr10ACLv6MixRuleDsap, zxr10ACLv6MixRuleSsap conflict leaf nodes: 1. zxr10ACLv6MixRuleFragments conflicts with zxr10ACLv6MixRuleSrcPortOpr, zxr10ACLv6MixRuleSrcPortValue, zxr10ACLv6MixRuleSrcPortRange, zxr10ACLv6MixRuleDestPortOpr, zxr10ACLv6MixRuleDestPortValue, zxr10ACLv6MixRuleDestPortRange, zxr10ACLv6MixRuleTCPEstablish, zxr10ACLv6MixRuleICMPType, zxr10ACLv6MixRuleICMPCode, zxr10ACLv6MixRuleRstFlag, zxr10ACLv6MixRuleAckFlag, zxr10ACLv6MixRuleFinFlag, zxr10ACLv6MixRuleSynFlag, zxr10ACLv6MixRulePshFlag, zxr10ACLv6MixRuleUrgFlag 2. zxr10ACLv6MixRuleDSCP conflicts with zxr10ACLv6MixRuleTc 3. zxr10ACLv6MixRuleTCPEstablish conflicts with zxr10ACLv6MixRuleRstFlag, zxr10ACLv6MixRuleAckFlag 3. zxr10ACLv6MixRuleLinkProtocolEx conflicts with zxr10ACLv6MixRuleDsap, zxr10ACLv6MixRuleSsap | |
| STR zxr10ACLv6MixRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.1 | DisplayString | not-accessible | Name of an IPv6 Mixed access-list (1-31 characters) |
| I32 zxr10ACLv6MixRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLv6MixRulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| I32 zxr10ACLv6MixRuleLinkProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.4 | Integer32 | read-only | Link protocal: valid value 65536 invalid value This is an optional node. |
| MAC zxr10ACLv6MixRuleSrcMAC | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.5 | MacAddress | read-only | Source MAC address |
| MAC zxr10ACLv6MixRuleSrcMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.6 | MacAddress | read-only | Source MAC wildcard |
| MAC zxr10ACLv6MixRuleDestMAC | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.7 | MacAddress | read-only | Destination MAC address |
| MAC zxr10ACLv6MixRuleDestMACWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.8 | MacAddress | read-only | Destination MAC wildcard |
| I32 zxr10ACLv6MixRuleIncos | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.9 | Integer32 | read-only | Value of inner cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleOutCos | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.10 | Integer32 | read-only | Value of outer cos: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleInVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.11 | Integer32 | read-only | Value of inner vlan valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleOutVlanID | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.12 | Integer32 | read-only | Value of outer vlan valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLv6MixRuleInVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.13 | DisplayString | read-only | Range of inner vlan - valid value 0 invalid value This is an optional node. |
| STR zxr10ACLv6MixRuleOutVlanRange | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.14 | DisplayString | read-only | Range of outer vlan - valid value 0 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleFlowlabel | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.15 | Integer32 | read-only | Flowlabel value: valid value 2147483647 invalid value This is an optional node. |
| STR zxr10ACLv6MixRuleSrcAddr | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.16 | DisplayString | read-only | X:X::X:X Source address |
| INT zxr10ACLv6MixRuleSrcWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.17 | INTEGER | read-only | Source Wildcard |
| STR zxr10ACLv6MixRuleDestAddr | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.18 | DisplayString | read-only | X:X::X:X Destination address |
| INT zxr10ACLv6MixRuleDestWildcard | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.19 | INTEGER | read-only | Destination Wildcard |
| INT zxr10ACLv6MixRuleIpProtocol | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.20 | INTEGER | read-only | An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf Open Shortest Path First Protocol (89) pim Protocol Independent Multicast (103) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) sctp Stream Control Transmission Protocol (132) vrrp Virtual Router Redundancy Protocol (112) |
| INT zxr10ACLv6MixRuleSrcPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.21 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv6MixRuleSrcPortValue and zxr10ACLv6MixRuleSrcPortRange When the value of zxr10ACLv6MixRuleSrcPortOpr is invalid(65535). Check zxr10ACLv6MixRuleSrcPortValue when the value zxr10ACLv6MixRuleSrcPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv6MixRuleSrcPortRange only when the value of zxr10ACLv6MixRuleSrcPortOpr is range(7). |
| INT zxr10ACLv6MixRuleSrcPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.22 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv6MixRuleSrcPortOpr is eq(1),ge(2) or le(3). |
| STR zxr10ACLv6MixRuleSrcPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.23 | DisplayString | read-only | Port range: - Check zxr10ACLv6MixRuleSrcPortRange only when the value of zxr10ACLv6MixRuleSrcPortOpr is range(7). |
| INT zxr10ACLv6MixRuleDestPortOpr | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.24 | INTEGER | read-only | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv6MixRuleDestPortValue and zxr10ACLv6MixRuleDestPortRange When the value of zxr10ACLv6MixRuleDestPortOpr is invalid(65535). Check zxr10ACLv6MixRuleDestPortValue when the value zxr10ACLv6MixRuleDestPortOpr is eq(1),ge(2) or le(3). Check zxr10ACLv6MixRuleDestPortRange only when the value of zxr10ACLv6MixRuleDestPortOpr is range(7). |
| INT zxr10ACLv6MixRuleDestPortValue | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.25 | INTEGER | read-only | Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) Check this node when the value of zxr10ACLv6MixRuleDestPortOpr is eq(1),ge(2) or le(3). |
| STR zxr10ACLv6MixRuleDestPortRange | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.26 | DisplayString | read-only | Port range: - Check zxr10ACLv6MixRuleDestPortRange only when the value of zxr10ACLv6MixRuleDestPortOpr is range(7). |
| ACL zxr10ACLv6MixRuleTCPEstablish | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.27 | AclValidOrNot | read-only | Match established connections. This is an optional node. |
| ACL zxr10ACLv6MixRuleRstFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.28 | AclTcpFlagType | read-only | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6MixRuleAckFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.29 | AclTcpFlagType | read-only | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6MixRuleFinFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.30 | AclTcpFlagType | read-only | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6MixRuleSynFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.31 | AclTcpFlagType | read-only | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6MixRulePshFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.32 | AclTcpFlagType | read-only | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| ACL zxr10ACLv6MixRuleUrgFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.33 | AclTcpFlagType | read-only | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| INT zxr10ACLv6MixRuleICMPType | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.34 | INTEGER | read-only | ICMP type: valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Echo request (ping, 128) mld-query Multicast Listener Discovery Query (130) mld-reduction Multicast Listener Discovery Reduction(132) mld-report Multicast Listener Discovery Report(131) nd-na Neighbor discovery neighbor advertisments(136) nd-ns Neighbor discovery neighbor solicitations(135) packet-too-big Packet too big (2) parameter-problem All parameter problems (4) redirect Neighbor redirect (137) router-advertisment Neighbor discovery router advertisments(134) router-renumbering All router renumbering (138) router-solicitation Neighbor discovery router solicitations(133) time-exceeded Time exceeded (3) This is an optional node. |
| INT zxr10ACLv6MixRuleICMPCode | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.35 | INTEGER | read-only | ICMP code: valid value 65535 invalid value This is an optional node. |
| ACL zxr10ACLv6MixRuleRouting | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.36 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6MixRuleAuthen | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.37 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6MixRuleDestops | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.38 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6MixRuleFragments | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.39 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6MixRuleHopByHop | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.40 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| ACL zxr10ACLv6MixRuleEsp | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.41 | AclValidOrNot | read-only | Match if the specify IPv6 header is present. This is an optional node. |
| I32 zxr10ACLv6MixRuleDSCP | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.42 | Integer32 | read-only | DSCP value: valid value 255 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleTc | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.43 | Integer32 | read-only | Traffic Class value: valid value 65535 invalid value This is an optional node. |
| STR zxr10ACLv6MixRuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.44 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| ACL zxr10ACLv6MixRuleBSrcMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.45 | AclValidOrNot | read-only | Match if source MAC address range is configured. When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6MixRuleSrcMACRg1Min and zxr10ACLv6MixRuleSrcMACRg1Max are valid. |
| MAC zxr10ACLv6MixRuleSrcMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.46 | MacAddress | read-only | Lower limit of first source MAC address range |
| MAC zxr10ACLv6MixRuleSrcMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.47 | MacAddress | read-only | Upper limit of first source MAC address range |
| ACL zxr10ACLv6MixRuleBSrcMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.48 | AclValidOrNot | read-only | Match if second source MAC address range is configured. When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6MixRuleSrcMACRg2Min and zxr10ACLv6MixRuleSrcMACRg2Max are valid. |
| MAC zxr10ACLv6MixRuleSrcMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.49 | MacAddress | read-only | Lower limit of second source MAC address range |
| MAC zxr10ACLv6MixRuleSrcMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.50 | MacAddress | read-only | Upper limit of second source MAC address range |
| ACL zxr10ACLv6MixRuleBDestMACRange1 | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.51 | AclValidOrNot | read-only | Match if destination MAC address range is configured. When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr10ACLv6MixRuleDestMACRg1Min and zxr10ACLv6MixRuleDestMACRg1Max are valid. |
| MAC zxr10ACLv6MixRuleDestMACRg1Min | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.52 | MacAddress | read-only | Lower limit of first destination MAC address range |
| MAC zxr10ACLv6MixRuleDestMACRg1Max | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.53 | MacAddress | read-only | Upper limit of first destination MAC address range |
| ACL zxr10ACLv6MixRuleBDestMACRange2 | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.54 | AclValidOrNot | read-only | Match if second destination MAC address range is configured. When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr10ACLv6MixRuleDestMACRg2Min and zxr10ACLv6MixRuleDestMACRg2Max are valid. |
| MAC zxr10ACLv6MixRuleDestMACRg2Min | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.55 | MacAddress | read-only | Lower limit of second destination MAC address range |
| MAC zxr10ACLv6MixRuleDestMACRg2Max | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.56 | MacAddress | read-only | Upper limit of second destination MAC address range |
| I32 zxr10ACLv6MixRuleLinkProtocolEx | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.57 | Integer32 | read-only | Link protocal: valid value 65536 invalid value This is an optional node. |
| ACL zxr10ACLv6MixRuleSrcAddrMaskFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.58 | AclValidOrNot | read-only | This flag indicates the way of configuring IPv6 source address mask, such as zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleSrcWildcardBits. If this flag is valid, IPv6 source address mask is configured by wildcard bits, (e.g. X:X::X:X) and zxr10ACLv6MixRuleSrcWildcardBits is valid; if not, IPv6 source address mask is configured by prefix length, (e.g. X:X::X:X/0-128) and zxr10ACLv6MixRuleSrcWildcard is valid. |
| ADR zxr10ACLv6MixRuleSrcWildcardBits | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.59 | Ipv6Address | read-only | Source address wildcard bits |
| ACL zxr10ACLv6MixRuleDstAddrMaskFlag | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.60 | AclValidOrNot | read-only | This flag indicates the way of configuring IPv6 destination address mask, such as zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleDstWildcardBits. If this flag is valid, IPv6 destination address mask is configured by wildcard bits, (e.g. X:X::X:X) and zxr10ACLv6MixRuleDstWildcardBits is valid; if not, IPv6 destination address mask is configured by prefix length, (e.g. X:X::X:X/0-128) and zxr10ACLv6MixRuleDestWildcard is valid. |
| ADR zxr10ACLv6MixRuleDstWildcardBits | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.61 | Ipv6Address | read-only | Destination address wildcard bits |
| I32 zxr10ACLv6MixRuleDsap | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.62 | Integer32 | read-only | Destination service access point: valid value 65535 invalid value This is an optional node. |
| I32 zxr10ACLv6MixRuleSsap | 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.63 | Integer32 | read-only | Source service access point: valid value 65535 invalid value This is an optional node. |
| zxr10ACLUsrProtocolObjects | 1.3.6.1.4.1.3902.3.6000.602.2.6 | |||
| zxr10ACLUsrProtocolListTable | 1.3.6.1.4.1.3902.3.6000.602.2.6.1 | not-accessible | User Protocol ACL | |
| zxr10ACLUsrProtocolListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.6.1.1 | not-accessible | User Protocol ACL | |
| STR zxr10ACLUsrProtocolListName | 1.3.6.1.4.1.3902.3.6000.602.2.6.1.1.1 | DisplayString | read-only | Name of a User Protocol access-list (1-31 characters) |
| zxr10ACLUsrProtocolRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.6.2 | not-accessible | User Protocol Rule Table | |
| zxr10ACLUsrProtocolRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1 | not-accessible | User Protocol ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLUsrProtocolRuleAclName, zxr10ACLUsrProtocolRuleRuleID, zxr10ACLUsrProtocolRuleEtherType, zxr10ACLUsrProtocolRuleDestMAC, zxr10ACLUsrProtocolRuleDMACMask, zxr10ACLUsrProtocolRuleAnyEther, conflict leaf nodes: | |
| STR zxr10ACLUsrProtocolRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.1 | DisplayString | not-accessible | Name of a User Protocol access-list (1-31 characters) |
| I32 zxr10ACLUsrProtocolRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.2 | Integer32 | not-accessible | ID of this rule |
| I32 zxr10ACLUsrProtocolRuleEtherType | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.3 | Integer32 | read-only | Ether type of User Protocol: valid value 65536 invalid value |
| MAC zxr10ACLUsrProtocolRuleDestMAC | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.4 | MacAddress | read-only | Destination MAC address |
| MAC zxr10ACLUsrProtocolRuleDMACMask | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.5 | MacAddress | read-only | Destination MAC address wildcard This is an optional node. |
| ACL zxr10ACLUsrProtocolRuleAnyEther | 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.6 | AclValidOrNot | read-only | Match any ethernet type if the value is valid. |
| zxr10ACLUsrDefObjects | 1.3.6.1.4.1.3902.3.6000.602.2.7 | |||
| zxr10ACLUsrDefListTable | 1.3.6.1.4.1.3902.3.6000.602.2.7.1 | not-accessible | User defined ACL | |
| zxr10ACLUsrDefListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.7.1.1 | not-accessible | User defined ACL | |
| STR zxr10ACLUsrDefListName | 1.3.6.1.4.1.3902.3.6000.602.2.7.1.1.1 | DisplayString | read-only | Name of a User defined access-list (1-31 characters) |
| zxr10ACLUsrDefRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.7.2 | not-accessible | User defined Rule Table | |
| zxr10ACLUsrDefRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1 | not-accessible | User defined ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLUsrDefRuleAclName, zxr10ACLUsrDefRuleRuleID, zxr10ACLUsrDefRulePermitDeny, zxr10ACLUsrDefRuleFrameType, zxr10ACLUsrDefRuleTagStatus, zxr10ACLUsrDefRuleIpFlag, zxr10ACLUsrDefRuleAnySegment, zxr10ACLUsrDefRuleOffSet1, zxr10ACLUsrDefRuleRuleString1, zxr10ACLUsrDefRuleRuleMask1, zxr10ACLUsrDefRuleOffSet2, zxr10ACLUsrDefRuleRuleString2, zxr10ACLUsrDefRuleRuleMask2, zxr10ACLUsrDefRuleOffSet3, zxr10ACLUsrDefRuleRuleString3, zxr10ACLUsrDefRuleRuleMask3, zxr10ACLUsrDefRuleOffSet4, zxr10ACLUsrDefRuleRuleString4, zxr10ACLUsrDefRuleRuleMask4, zxr10ACLUsrDefRuleTimerangeName, conflict leaf nodes: | |
| STR zxr10ACLUsrDefRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.1 | DisplayString | not-accessible | Name of a User defined access-list (1-31 characters) |
| I32 zxr10ACLUsrDefRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLUsrDefRulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.3 | AclPermitDeny | read-only | deny : Specify packets to reject permit: Specify packets to forward |
| INT zxr10ACLUsrDefRuleFrameType | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.4 | INTEGER | read-only | ethernet2 Ethernet version II frame llc-snap LLC/SNAP frame in IEEE802.3 sap SAP frame in IEEE802.3 any Any frame |
| INT zxr10ACLUsrDefRuleTagStatus | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.5 | INTEGER | read-only | untag Status with no VLAN tag single-tag Status with VLAN tag double-tag Status with outer and inner VLAN tag any Any status with VLAN tag |
| INT zxr10ACLUsrDefRuleIpFlag | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.6 | INTEGER | read-only | ip4-hdr-only Segment of only IPv4 header ip6-hdr-only Segment of only IPv6 header ip6-fragment Segment of IPv6 fragment ip4-over-ip4 Segment of IPv4 datagram over IPv4 ip6-over-ip4 Segment of IPv6 datagram over IPv4 ip6-fragment-over-ip4 Segment of IPv6 fragment datagram over IPv4 ip4-over-ip6 Segment of IPv4 datagram over IPv6 ip6-over-ip6 Segment of IPv6 datagram over IPv6 gre-ip4-over-ip4 Segment of IPv4 datagram over IPv4 by GRE gre-ip6-over-ip4 Segment of IPv6 datagram over IPv4 by GRE gre-ip4-over-ip6 Segment of IPv4 datagram over IPv6 by GRE gre-ip6-over-ip6 Segment of IPv6 datagram over IPv6 by GRE ip-unused None IP format datagram one-mpls-label Segment of the first label out of tunnel two-mpls-labels Segment of the second label in tunnel any-mpls-labels Segment of any or multiple MPLS label any Any segment |
| ACL zxr10ACLUsrDefRuleAnySegment | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.7 | AclValidOrNot | read-only | Any rule segment. |
| I32 zxr10ACLUsrDefRuleOffSet1 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.8 | Integer32 | read-only | First offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| STR zxr10ACLUsrDefRuleRuleString1 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.9 | DisplayString | read-only | First user defined hexadecimal string(must be 10 characters) |
| STR zxr10ACLUsrDefRuleRuleMask1 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.10 | DisplayString | read-only | First user defined hexadecimal string mask(must be 10 characters) |
| I32 zxr10ACLUsrDefRuleOffSet2 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.11 | Integer32 | read-only | Second offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| STR zxr10ACLUsrDefRuleRuleString2 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.12 | DisplayString | read-only | Second user defined hexadecimal string(must be 10 characters) |
| STR zxr10ACLUsrDefRuleRuleMask2 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.13 | DisplayString | read-only | Second user defined hexadecimal string mask(must be 10 characters) |
| I32 zxr10ACLUsrDefRuleOffSet3 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.14 | Integer32 | read-only | Third offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| STR zxr10ACLUsrDefRuleRuleString3 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.15 | DisplayString | read-only | Third user defined hexadecimal string(must be 10 characters) |
| STR zxr10ACLUsrDefRuleRuleMask3 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.16 | DisplayString | read-only | Third user defined hexadecimal string mask(must be 10 characters) |
| I32 zxr10ACLUsrDefRuleOffSet4 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.17 | Integer32 | read-only | Fourth offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| STR zxr10ACLUsrDefRuleRuleString4 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.18 | DisplayString | read-only | Fourth user defined hexadecimal string(must be 10 characters) |
| STR zxr10ACLUsrDefRuleRuleMask4 | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.19 | DisplayString | read-only | Fourth user defined hexadecimal string mask(must be 10 characters) |
| STR zxr10ACLUsrDefRuleTimerangeName | 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.20 | DisplayString | read-only | Time range name (1-31 characters). This is an optional node. |
| zxr10ACLv4VxlanObjects | 1.3.6.1.4.1.3902.3.6000.602.2.8 | |||
| zxr10ACLv4VxlanListTable | 1.3.6.1.4.1.3902.3.6000.602.2.8.1 | not-accessible | IPv4 VXLAN ACL | |
| zxr10ACLv4VxlanListEntry | 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1 | not-accessible | IPv4 VXLAN ACL | |
| STR zxr10ACLv4VxlanListName | 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.1 | DisplayString | not-accessible | Name of an IPv4 VXLAN access-list (1-31 characters) |
| ACL zxr10ACLv4VxlanListWithoutVni | 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.2 | AclValidOrNot | read-create | If the flag is setted with valid, this acl can not be configed with VNI. If the flag is setted with invalid, this acl can be configed with VNI. |
| ROW zxr10ACLv4VxlanListRowStatus | 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.100 | RowStatus | read-create | RowStatus |
| zxr10ACLv4VxlanRuleTable | 1.3.6.1.4.1.3902.3.6000.602.2.8.2 | not-accessible | IPv4 VXLAN ACL Rule Table | |
| zxr10ACLv4VxlanRuleEntry | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1 | not-accessible | IPv4 VXLAN ACL effective leaf nodes: All of the leaf nodes are effective: conflict leaf nodes: These 3 nodes below conflict, can only config one at most: zxr10ACLv4VxlanRulePrecedenceIn, zxr10ACLv4VxlanRuleTOSIn, zxr10ACLv4VxlanRuleDSCPIn These 3 nodes below conflict, can only config one at mos: zxr10ACLv4VxlanRulePrecedenceOut, zxr10ACLv4VxlanRuleTOSOut, zxr10ACLv4VxlanRuleDSCPOut The inner-layer information contains these nodes below: zxr10ACLv4VxlanRuleInnerFlag, zxr10ACLv4VxlanRuleIpProtocolIn, zxr10ACLv4VxlanRuleSrcAddrIn, zxr10ACLv4VxlanRuleSrcIMaskIn, zxr10ACLv4VxlanRuleSrcAnyIn, zxr10ACLv4VxlanRuleDstAddrIn, zxr10ACLv4VxlanRuleDstIMaskIn, zxr10ACLv4VxlanRuleDstAnyIn, zxr10ACLv4VxlanRuleSrcPortOprIn, zxr10ACLv4VxlanRuleSrcPortValIn, zxr10ACLv4VxlanRuleSrcPortRgIn, zxr10ACLv4VxlanRuleDstPortOprIn, zxr10ACLv4VxlanRuleDstPortValIn, zxr10ACLv4VxlanRuleDstPortRgIn, zxr10ACLv4VxlanRulePrecedenceIn, zxr10ACLv4VxlanRuleTOSIn, zxr10ACLv4VxlanRuleDSCPIn The outer-layer information contains these nodes below: zxr10ACLv4VxlanRuleOuterFlag, zxr10ACLv4VxlanRuleIpProtocolOut, zxr10ACLv4VxlanRuleSrcAddrOut, zxr10ACLv4VxlanRuleSrcIMaskOut, zxr10ACLv4VxlanRuleSrcAnyOut, zxr10ACLv4VxlanRuleDstAddrOut, zxr10ACLv4VxlanRuleDstIMaskOut, zxr10ACLv4VxlanRuleDstAnyOut, zxr10ACLv4VxlanRuleSrcPortOprOut, zxr10ACLv4VxlanRuleSrcPortValOut, zxr10ACLv4VxlanRuleSrcPortRgOut, zxr10ACLv4VxlanRuleDstPortOprOut, zxr10ACLv4VxlanRuleDstPortValOut, zxr10ACLv4VxlanRuleDstPortRgOut, zxr10ACLv4VxlanRulePrecedenceOut, zxr10ACLv4VxlanRuleTOSOut, zxr10ACLv4VxlanRuleDSCPOut | |
| STR zxr10ACLv4VxlanRuleAclName | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.1 | DisplayString | not-accessible | Name of an IPv4 VXLAN access-list (1-31 characters) |
| I32 zxr10ACLv4VxlanRuleRuleID | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.2 | Integer32 | not-accessible | ID of this rule |
| ACL zxr10ACLv4VxlanRulePermitDeny | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.3 | AclPermitDeny | read-create | The node has two values: 1. deny means that packets can not be handled. 2. permit means that packets can be handled. |
| ACL zxr10ACLv4VxlanRuleInnerFlag | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.4 | AclValidOrNot | read-create | If the flag is setted with valid, the inner infomation is meaningful. If the flag is setted with invalid, the inner infomation is not meaningful. |
| INT zxr10ACLv4VxlanRuleIpProtocolIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.5 | INTEGER | read-create | An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol (2) ip Any internet protocol(65535) ospf Open Shortest Path First Protocol (89) pim Protocol Independent Multicast (103) tcp Transmission Control Protocol(6) udp User Datagram Protocol(17) vrrp Virtual Router Redundancy Protocol (112) |
| IP zxr10ACLv4VxlanRuleSrcAddrIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.6 | IpAddress | read-create | A.B.C.D Source address |
| IP zxr10ACLv4VxlanRuleSrcIMaskIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.7 | IpAddress | read-create | A.B.C.D Wildcard bits |
| ACL zxr10ACLv4VxlanRuleSrcAnyIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.8 | AclValidOrNot | read-create | If the flag is setted with valid, the rule is effective to any source address. |
| IP zxr10ACLv4VxlanRuleDstAddrIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.9 | IpAddress | read-create | A.B.C.D Destination address |
| IP zxr10ACLv4VxlanRuleDstIMaskIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.10 | IpAddress | read-create | A.B.C.D Destination wildcard bits |
| ACL zxr10ACLv4VxlanRuleDstAnyIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.11 | AclValidOrNot | read-create | If the flag is setted with valid, the rule is effective to any destination address. |
| INT zxr10ACLv4VxlanRuleSrcPortOprIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.12 | INTEGER | read-create | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4VxlanRuleSrcPortValIn and zxr10ACLv4VxlanRuleSrcPortRgIn When the value of zxr10ACLv4VxlanRuleSrcPortOprIn is invalid(65535). Check zxr10ACLv4VxlanRuleSrcPortValIn when the value zxr10ACLv4VxlanRuleSrcPortOprIn is eq(1),ge(2) or le(3). Check zxr10ACLv4VxlanRuleSrcPortRgIn only when the value of zxr10ACLv4VxlanRuleSrcPortOprIn is range(7). |
| INT zxr10ACLv4VxlanRuleSrcPortValIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.13 | INTEGER | read-create | Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) TCP protocol contains known port as follows: bgp Border gateway protocol (179) domain Domain name service (53) finger Finger (79) ftp File transfer protocol (21) login Login (rlogin, 513) pop2 Post office protocol v2 (109) pop3 Post office protocol v3 (110) smtp Simple mail transport protocol (25) telnet Telnet (23) www World wide web (HTTP, 80) Check this node when the value of zxr10ACLv4VxlanRuleSrcPortOprIn is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4VxlanRuleSrcPortRgIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.14 | DisplayString | read-create | Port range: - Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
| INT zxr10ACLv4VxlanRuleDstPortOprIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.15 | INTEGER | read-create | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4VxlanRuleDstPortValIn and zxr10ACLv4VxlanRuleDstPortRgIn When the value of zxr10ACLv4VxlanRuleDestPortOprIn is invalid(65535). Check zxr10ACLv4VxlanRuleDstPortValIn when the value zxr10ACLv4VxlanRuleDestPortOprIn is eq(1),ge(2) or le(3). Check zxr10ACLv4VxlanRuleDstPortRgIn only when the value of zxr10ACLv4VxlanRuleDestPortOprIn is range(7). |
| INT zxr10ACLv4VxlanRuleDstPortValIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.16 | INTEGER | read-create | Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) TCP protocol contains known port as follows: bgp Border gateway protocol (179) domain Domain name service (53) finger Finger (79) ftp File transfer protocol (21) login Login (rlogin, 513) pop2 Post office protocol v2 (109) pop3 Post office protocol v3 (110) smtp Simple mail transport protocol (25) telnet Telnet (23) www World wide web (HTTP, 80) Check this node when the value of zxr10ACLv4VxlanRuleDestPortOprIn is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4VxlanRuleDstPortRgIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.17 | DisplayString | read-create | Port range: - Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprIn is range(7). |
| I32 zxr10ACLv4VxlanRulePrecedenceIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.18 | Integer32 | read-create | Precedence level: valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSIn and zxr10ACLv4VxlanRuleDSCPIn. |
| I32 zxr10ACLv4VxlanRuleTOSIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.19 | Integer32 | read-create | Type of service(ToS): valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4VxlanRuleDSCPIn. |
| I32 zxr10ACLv4VxlanRuleDSCPIn | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.20 | Integer32 | read-create | DSCP value: valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4VxlanRuleTOSIn |
| I32 zxr10ACLv4VxlanRuleVniID | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.21 | Integer32 | read-create | VXLAN id. Range is 1 to 16777215. 0 is invalid value. |
| ACL zxr10ACLv4VxlanRuleOuterFlag | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.22 | AclValidOrNot | read-create | If the flag is setted with valid, the outer infomatino is meaningful. If the flag is setted with invalid, the outer infomation is not meaningful. |
| INT zxr10ACLv4VxlanRuleIpProtocolOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.23 | INTEGER | read-create | udp User Datagram Protocol(17) 65533 Invalid value. |
| IP zxr10ACLv4VxlanRuleSrcAddrOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.24 | IpAddress | read-create | A.B.C.D Source address |
| IP zxr10ACLv4VxlanRuleSrcIMaskOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.25 | IpAddress | read-create | A.B.C.D Wildcard bits |
| ACL zxr10ACLv4VxlanRuleSrcAnyOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.26 | AclValidOrNot | read-create | If the flag is setted with valid, the rule is effective to any dest address. |
| IP zxr10ACLv4VxlanRuleDstAddrOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.27 | IpAddress | read-create | A.B.C.D Destination address |
| IP zxr10ACLv4VxlanRuleDstIMaskOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.28 | IpAddress | read-create | A.B.C.D Destination wildcard bits |
| ACL zxr10ACLv4VxlanRuleDstAnyOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.29 | AclValidOrNot | read-create | If the flag is setted with valid, the rule is effective to any destination address. |
| INT zxr10ACLv4VxlanRuleSrcPortOprOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.30 | INTEGER | read-create | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4VxlanRuleSrcPortValOut and zxr10ACLv4VxlanRuleSrcPortRgOut When the value of zxr10ACLv4VxlanRuleSrcPortOprOut is invalid(65535). Check zxr10ACLv4VxlanRuleSrcPortValOut when the value zxr10ACLv4VxlanRuleSrcPortOprOut is eq(1),ge(2) or le(3). Check zxr10ACLv4VxlanRuleSrcPortRgOut only when the value of zxr10ACLv4VxlanRuleSrcPortOprOut is range(7). |
| INT zxr10ACLv4VxlanRuleSrcPortValOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.31 | INTEGER | read-create | Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) TCP protocol contains known port as follows: bgp Border gateway protocol (179) domain Domain name service (53) finger Finger (79) ftp File transfer protocol (21) login Login (rlogin, 513) pop2 Post office protocol v2 (109) pop3 Post office protocol v3 (110) smtp Simple mail transport protocol (25) telnet Telnet (23) www World wide web (HTTP, 80) Check this node when the value of zxr10ACLv4VxlanRuleSrcPortOprOut is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4VxlanRuleSrcPortRgOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.32 | DisplayString | read-create | Port range: - Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
| INT zxr10ACLv4VxlanRuleDstPortOprOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.33 | INTEGER | read-create | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet on a given port range 65535 invalid value Needn't care for zxr10ACLv4VxlanRuleDstPortValOut and zxr10ACLv4VxlanRuleDstPortRgOut When the value of zxr10ACLv4VxlanRuleDestPortOprOut is invalid(65535). Check zxr10ACLv4VxlanRuleDstPortValOut when the value zxr10ACLv4VxlanRuleDestPortOprOut is eq(1),ge(2) or le(3). Check zxr10ACLv4VxlanRuleDstPortRgOut only when the value of zxr10ACLv4VxlanRuleDestPortOprOut is range(7). |
| INT zxr10ACLv4VxlanRuleDstPortValOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.34 | INTEGER | read-create | Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-auto-rp PIM auto-RP (496) rip Routing information protocol (router, in.routed, 520) snmp Simple network management protocol (161) snmptrap SNMP traps (162) tftp Trivial file transfer protocol (69) TCP protocol contains known port as follows: bgp Border gateway protocol (179) domain Domain name service (53) finger Finger (79) ftp File transfer protocol (21) login Login (rlogin, 513) pop2 Post office protocol v2 (109) pop3 Post office protocol v3 (110) smtp Simple mail transport protocol (25) telnet Telnet (23) www World wide web (HTTP, 80) Check this node when the value of zxr10ACLv4VxlanRuleDestPortOprOut is eq(1),ge(2) or le(3). |
| STR zxr10ACLv4VxlanRuleDstPortRgOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.35 | DisplayString | read-create | Port range: - Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprOut is range(7). |
| I32 zxr10ACLv4VxlanRulePrecedenceOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.36 | Integer32 | read-create | Precedence level: valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSOut and zxr10ACLv4VxlanRuleDSCPOut. |
| I32 zxr10ACLv4VxlanRuleTOSOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.37 | Integer32 | read-create | Type of service(ToS): valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4VxlanRuleDSCPOut. |
| I32 zxr10ACLv4VxlanRuleDSCPOut | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.38 | Integer32 | read-create | DSCP value: valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4VxlanRuleTOSOut. |
| ROW zxr10ACLv4VxlanRuleRowStatus | 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.100 | RowStatus | read-create | RowStatus |
| zxr10ACLNotifications | 1.3.6.1.4.1.3902.3.6000.602.3 | |||
| zxr10ACLConformance | 1.3.6.1.4.1.3902.3.6000.602.4 | |||
| zxr10ACLGroups | 1.3.6.1.4.1.3902.3.6000.602.4.1 | |||
| zxr10ACLv4Group | 1.3.6.1.4.1.3902.3.6000.602.4.1.1 | IPv4 ACL group. | ||
| zxr10ACLv6Group | 1.3.6.1.4.1.3902.3.6000.602.4.1.2 | IPv6 ACL group. | ||
| zxr10ACLLinkGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.3 | Link ACL group. | ||
| zxr10ACLv4MixGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.4 | IPv4 mixed ACL group. | ||
| zxr10ACLv6MixGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.5 | IPv6 mixed ACL group. | ||
| zxr10ACLUsrProtocolGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.6 | User protocol ACL group. | ||
| zxr10ACLUsrDefinedGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.7 | User defined ACL group. | ||
| zxr10ACLv4VxlanGroup | 1.3.6.1.4.1.3902.3.6000.602.4.1.8 | IPv4 VXLAN ACL group. |
RFC description
Access Control List (ACL) protocol management for ZTE routers, supporting IPv4, IPv6, link, and mixed rules.
Start monitoring ZTE ZXR10 series routers/switches (enhanced IPv4 ACL rule/permit-deny config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.