ZXR10-VLAN-TRANS-MIB

All MIBs › ZXR10-VLAN-TRANS-MIB

Organization: ZTE

Last Updated: 2016-07-11

Category: ZTE ZXR10 Layer 2 Switching

Description: Defines ZTE ZXR10 VLAN translation rules for mapping customer VLAN IDs to service VLAN IDs at network edges.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-VLAN-TRANS-MIB?

This is a ZTE proprietary MIB for the ZXR10 platform that manages VLAN translation, mapping customer-facing VLAN IDs to service-provider VLAN IDs at network edges, a common feature for metro Ethernet and carrier VLAN stacking deployments. It exposes the configuration objects needed to define and manage these VLAN ID translation rules on ZXR10 edge devices. Its monitoring value is primarily configuration-state visibility: confirming translation rules are correctly provisioned so that customer traffic is mapped to the intended service VLAN, which helps diagnose traffic that is dropped or misdirected due to a VLAN ID mismatch at the network edge. It complements the standard 802.1Q VLAN model rather than replacing it. It is deployed on ZTE ZXR10 edge switches/routers in metro Ethernet or carrier-edge environments using VLAN translation for multi-tenant service delivery, and administrators can download the ZXR10-VLAN-TRANS-MIB file to load into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-VLAN-TRANS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 edge router/switch

Monitoring Examples

An administrator would check the VLAN translation configuration entries to confirm a given customer VLAN ID is correctly mapped to its intended service VLAN ID at the network edge. A customer whose traffic is not reaching the core network would prompt review of this mapping to rule out a missing or incorrect translation rule as the cause. Only an IMPORTS clause was provided as a sample object for this module, so specific table/object identifiers beyond that cannot be confirmed here.

What Can Be Monitored

customer-to-service VLAN ID mapping
VLAN translation rule configuration

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10switch	1.3.6.1.4.1.3902.3.102
zxr10VlanTrans	1.3.6.1.4.1.3902.3.102.30			VLAN translation
zxr10CpuVlanTransPortTable	1.3.6.1.4.1.3902.3.102.30.1		not-accessible	The VLAN trans port table,in which you can find which ports can be configed and also know the relation with the port's name and ifindex.
zxr10CpuVlanTransPortEntry	1.3.6.1.4.1.3902.3.102.30.1.1		not-accessible	The VLAN trans port table entry.
STR zxr10CpuVlanTransPortName	1.3.6.1.4.1.3902.3.102.30.1.1.1	DisplayString	read-only	The name of this port which can be configed by vlan trans ,it include physics port and smartgroup port
zxr10CpuVlanTransTable	1.3.6.1.4.1.3902.3.102.30.2		not-accessible	The VLAN trans information table.
zxr10CpuVlanTransEntry	1.3.6.1.4.1.3902.3.102.30.2.1		not-accessible	The VLAN trans information table entry.
I32 zxr10CpuvlantransId	1.3.6.1.4.1.3902.3.102.30.2.1.1	Integer32	read-only	The VLAN trans session id (It's toplimit depends on ability of the device).
I32 zxr10CpuvlantransInport	1.3.6.1.4.1.3902.3.102.30.2.1.2	Integer32	read-only	The index of ingress-port of VLAN trans. Every port have a unique index, for example the index of gei-0/1/0/1 is 5,so you can input 5 represent the port gei-0/1/0/1 and you can find the relationship between them in zxr10CpuvlantransPortTable in which there is only one ingress-port.
I32 zxr10CpuvlantransExport	1.3.6.1.4.1.3902.3.102.30.2.1.3	Integer32	read-only	The index of egress-port of VLAN trans. Every port have a unique index, for example the index of gei-0/1/0/2 is 6,so you can input 6 represent the port gei-0/1/0/2 and you can find the relationship between them in zxr10CpuvlantransPortTable in which there is only one egress-port.
I32 zxr10CpuvlantransadvanceFlag	1.3.6.1.4.1.3902.3.102.30.2.1.5	Integer32	read-only	The advance flag of VLAN trans session, the valid vlaue is 0 or 1. If the VLAN trans session have uplink port the value is 1,otherwise is 0.
STR zxr10CpuvlantransUpport	1.3.6.1.4.1.3902.3.102.30.2.1.6	DisplayString	read-only	The indexs of uplink port in VLAN transvlan table. Every port have a unique index, for example the index of gei-0/1/0/2 is 6,so you can input 6 represent the port gei-0/1/0/2 and you can find the relationship between them in zxr10CpuvlantransPortTable. The max number of uplink port in a VLAN trans table is four.
ROW zxr10CpuvlantransRowStatus	1.3.6.1.4.1.3902.3.102.30.2.1.7	RowStatus	read-only	The flag of create or delete VLAN trans session.
I32 zxr10CpuvlantransExInnervlan	1.3.6.1.4.1.3902.3.102.30.2.1.12	Integer32	read-only	The VLAN trans's ex-inner vlan ,the value is vlan id such as 100, only one number.
I32 zxr10CpuvlantransExOutervlan	1.3.6.1.4.1.3902.3.102.30.2.1.13	Integer32	read-only	The VLAN trans's ex-outner vlan ,the value is vlan id such as 100, only one number.
STR zxr10CpuvlantransInInnervlan	1.3.6.1.4.1.3902.3.102.30.2.1.14	DisplayString	read-only	The VLAN trans inner of invlan ,which input vlan id's range id 1- 4094,such as '3-4,6,1000-1024',the value of inner vlan is a range and also can be one value such as 500.if the input is NO Data you must get vlan bitmap.
STR zxr10CpuvlantransInOutervlan	1.3.6.1.4.1.3902.3.102.30.2.1.15	DisplayString	read-only	The VLAN trans outner of invlan ,which input vlan id's range id 1- 4094,such as '1-10,34,40,1025-1200,2044,2048',the value of outner invlan is a range and also can be one value such as 2000.if the input is NO Data you must get vlan bitmap.
OCT zxr10CpuvlantransInInnervlan1k	1.3.6.1.4.1.3902.3.102.30.2.1.16	OCTET STRING	read-only	The VLAN trans inner of invlan bitMap (1-1023),which input vlan id's range id 1-1023,such as '3-4,6,1000-1023',the value of inner invlan is a range and also can be one value such as 500.
OCT zxr10CpuvlantransInInnervlan2k	1.3.6.1.4.1.3902.3.102.30.2.1.17	OCTET STRING	read-only	The VLAN trans inner of invlan bitMap (1024-2047),which input vlan id's range id 1024-2047,such as '1024-1200,2044,2048',the value of inner invlan is a range and also can be one value such as 2000.
OCT zxr10CpuvlantransInInnervlan3k	1.3.6.1.4.1.3902.3.102.30.2.1.18	OCTET STRING	read-only	The VLAN trans inner of invlan bitMap (2048-3071),which input vlan id's range id 2048-3071,such as '2500-2570,3000,3071',the value of inner invlan is a range and also can be one value such as 2485.
OCT zxr10CpuvlantransInInnervlan4k	1.3.6.1.4.1.3902.3.102.30.2.1.19	OCTET STRING	read-only	The VLAN trans inner of invlan bitMap (3072-4094),which input vlan id's range id 3072-4094,such as '3080-3811,3900,4094',the value of inner invlan is a range and also can be one value such as 3900.
OCT zxr10CpuvlantransInOutervlan1k	1.3.6.1.4.1.3902.3.102.30.2.1.20	OCTET STRING	read-only	The VLAN trans outner of invlan bitMap (1-1023),which input vlan id's range id 1-1023,such as '3-4,6,1000-1023',the value of outner invlan is a range and also can be one value such as 500.
OCT zxr10CpuvlantransInOutervlan2k	1.3.6.1.4.1.3902.3.102.30.2.1.21	OCTET STRING	read-only	The VLAN trans outner ofinvlan bitMap (1024-2047),which input vlan id's range id 1024-2047,such as '1025-1200,2044,2047',the value of outner invlan is a range and also can be one value such as 2000.
OCT zxr10CpuvlantransInOutervlan3k	1.3.6.1.4.1.3902.3.102.30.2.1.22	OCTET STRING	read-only	The VLAN trans outner of invlan bitMap (2048-3071),which input vlan id's range id 2048-3071,such as '2500-2570,3000,3071',the value of outner invlan is a range and also can be one value such as 2485.
OCT zxr10CpuvlantransInOutervlan4k	1.3.6.1.4.1.3902.3.102.30.2.1.23	OCTET STRING	read-only	The VLAN trans outner of invlan bitMap (3072-4094),which input vlan id's range id 3072-4094,such as '3080-3811,3900,4094',the value of outner inner invlan is a range and also can be one value such as 3900.

RFC description

Manages VLAN translation configuration for ZXR10 switch port interfaces.

Start monitoring ZTE ZXR10 edge router/switch (customer-to-provider VLAN-ID translation config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-VLAN-TRANS-MIB

What Is ZXR10-VLAN-TRANS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description