All MIBs › ZXROSNG-MPLS-TE-MIB
Organization: ZTE Corporation
Last Updated: 2018-07-11
Category: ZXROSNG Next-Generation Transport
Description: Manages ZTE ZXROSNG MPLS Traffic Engineering tunnels, RSVP-TE LSP attributes, and bandwidth allocation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXROSNG-MPLS-TE-MIB?
ZXROSNG-MPLS-TE-MIB is a ZTE proprietary MIB for the ZXROSNG platform that manages MPLS Traffic Engineering (TE) tunnels, including RSVP-TE signaling behavior, graceful restart, and bandwidth/backup-tunnel configuration. Its data is largely configuration and operational-state oriented: global TE enable flags, RSVP signaling refresh intervals and miss thresholds, graceful-restart timers, and backup tunnel ID allocation. In monitoring terms this MIB is used to verify that MPLS TE signaling software is functioning correctly -- for example whether RSVP-TE graceful restart parameters are set to expected values and whether the global TE feature is enabled -- which is important for diagnosing tunnel setup failures or unexpected LSP re-signaling rather than physical hardware faults. It builds conceptually on standard MPLS/RSVP-TE and MPLS-TE MIB concepts (similar to IETF MPLS-TE-MIB and MPLS-LSR-MIB) even though this is a ZTE-specific implementation. It is typically deployed on ZXROSNG-based service-provider core/edge routers running MPLS-TE for traffic engineering across the backbone. Engineers can download the ZXROSNG-MPLS-TE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXROSNG-MPLS-TE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXROSNG-based router
Monitoring Examples
An admin would check zxMplsTEGlobalCfgTEEnable to confirm MPLS TE is enabled globally, then review zxMplsTEGlobalCfgRsvpExpNull and zxMplsTEGlobalCfgRsvpNoneNull to verify RSVP explicit/implicit null label handling matches the network design. Objects like zxMplsTEGlobalCfgGRRefInterval, zxMplsTEGlobalCfgGRRefMisses, and zxMplsTEGlobalCfgGRRecoverTime would be polled to confirm graceful-restart refresh timing is correctly tuned, since a mismatch here can cause TE tunnels to flap or fail to recover after a control-plane restart. zxMplsTEGlobalCfgABackTunnelMinID indicates the starting ID range reserved for backup tunnels, useful when auditing fast-reroute backup tunnel allocation under zxMplsTEGlobalOper.
What Can Be Monitored
- global MPLS TE enable status
- RSVP-TE explicit/implicit null label settings
- graceful-restart refresh interval and missed-refresh threshold
- graceful-restart recovery and restart timers
- backup tunnel ID allocation range
- TE signaling refresh interval and miss count
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
From ZXR10-SMI
| zxr10RosngMIB | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxRosngMplsTeModule | 1.3.6.1.4.1.3902.3.6000.204 | MPLS TE | ||
| zxRosngMplsTeMIB | 1.3.6.1.4.1.3902.3.6000.204.1 | |||
| zxMplsTEGlobalCfg | 1.3.6.1.4.1.3902.3.6000.204.1.1 | |||
| INT zxMplsTEGlobalCfgTEEnable | 1.3.6.1.4.1.3902.3.6000.204.1.1.1 | INTEGER | read-write | If this object is true, then it enables the mplsTETunnel. |
| INT zxMplsTEGlobalCfgRsvpExpNull | 1.3.6.1.4.1.3902.3.6000.204.1.1.2 | INTEGER | read-write | If this object is true, then it enables the explicit null label. |
| INT zxMplsTEGlobalCfgRsvpNoneNull | 1.3.6.1.4.1.3902.3.6000.204.1.1.3 | INTEGER | read-write | If this object is true, then it enables the none null label. |
| INT zxMplsTEGlobalCfgGR | 1.3.6.1.4.1.3902.3.6000.204.1.1.4 | INTEGER | read-write | If this object is true, then it enables the GR. |
| U32 zxMplsTEGlobalCfgGRRefInterval | 1.3.6.1.4.1.3902.3.6000.204.1.1.5 | Unsigned32 | read-write | Graceful-restart interval time 1000~30000(ms). |
| U32 zxMplsTEGlobalCfgGRRefMisses | 1.3.6.1.4.1.3902.3.6000.204.1.1.6 | Unsigned32 | read-write | Graceful-restart miss number 4~10. |
| U32 zxMplsTEGlobalCfgGRRecoverTime | 1.3.6.1.4.1.3902.3.6000.204.1.1.7 | Unsigned32 | read-write | Graceful-restart RecoveryTime 120000~600000(ms). |
| U32 zxMplsTEGlobalCfgGRRestartTime | 1.3.6.1.4.1.3902.3.6000.204.1.1.8 | Unsigned32 | read-write | Graceful-restart time 120000~600000(ms). |
| U32 zxMplsTEGlobalCfgSignalRefInterval | 1.3.6.1.4.1.3902.3.6000.204.1.1.9 | Unsigned32 | read-write | RefreshInterval 5000~65535000(ms). |
| U32 zxMplsTEGlobalCfgSignalRefMisses | 1.3.6.1.4.1.3902.3.6000.204.1.1.10 | Unsigned32 | read-write | SignallingRefreshMisses 2~10. |
| U32 zxMplsTEGlobalCfgABackTunnelMinID | 1.3.6.1.4.1.3902.3.6000.204.1.1.11 | Unsigned32 | read-write | The Min tunnelID can be used by Auto backup tunnel. |
| U32 zxMplsTEGlobalCfgABackTunnelMaxID | 1.3.6.1.4.1.3902.3.6000.204.1.1.12 | Unsigned32 | read-write | The Max tunnelID can be used by Auto backup tunnel. |
| IP zxMplsTEGlobalCfgRouterID | 1.3.6.1.4.1.3902.3.6000.204.1.1.13 | IpAddress | read-write | MPLS TE Router ID. |
| INT zxMplsTEGlobalCfgResvConfirm | 1.3.6.1.4.1.3902.3.6000.204.1.1.14 | INTEGER | read-write | If this object is true, then it enables the ResvConfirm. |
| INT zxMplsTEGlobalCfgRefReduction | 1.3.6.1.4.1.3902.3.6000.204.1.1.15 | INTEGER | read-write | If this object is true, then it enables the refresh reduction. |
| INT zxMplsTEGlobalCfgRetransmit | 1.3.6.1.4.1.3902.3.6000.204.1.1.16 | INTEGER | read-write | If this object is true, then it enables the retransmit. |
| U32 zxMplsTEGlobalCfgRetransInterval | 1.3.6.1.4.1.3902.3.6000.204.1.1.17 | Unsigned32 | read-write | Retransmit interval time 500~60000(ms). |
| U32 zxMplsTEGlobalCfgRetransLimit | 1.3.6.1.4.1.3902.3.6000.204.1.1.18 | Unsigned32 | read-write | Retransmit miss number 2~10. |
| U32 zxMplsTEGlobalCfgFrrPromTimerInterval | 1.3.6.1.4.1.3902.3.6000.204.1.1.19 | Unsigned32 | read-write | Fast reroute interval time 60~604800(s). |
| INT zxMplsTEGlobalCfgABandAdjust | 1.3.6.1.4.1.3902.3.6000.204.1.1.20 | INTEGER | read-write | If this object is true, then it enables sampling bandwidth. |
| U32 zxMplsTEGlobalCfgABandAdjFreq | 1.3.6.1.4.1.3902.3.6000.204.1.1.21 | Unsigned32 | read-write | Auto bandwidth sampling frequency. |
| U32 zxMplsTEGlobalCfgReoptimizeFreq | 1.3.6.1.4.1.3902.3.6000.204.1.1.22 | Unsigned32 | read-write | The tunnels reoptimize timer frequency 30~604800 (s). |
| INT zxMplsTEGlobalCfgReoptimizeEvent | 1.3.6.1.4.1.3902.3.6000.204.1.1.23 | INTEGER | read-write | The tunnels event reoptimize type. |
| INT zxMplsTEGlobalCfgFrrHelloEnabled | 1.3.6.1.4.1.3902.3.6000.204.1.1.24 | INTEGER | read-write | Enables or disables hello message in global-configuration mode which is defined in RFC3209. |
| INT zxMplsTEGlobalCfgSrlgExcluMode | 1.3.6.1.4.1.3902.3.6000.204.1.1.25 | INTEGER | read-write | Auto backup tunnels avoid SRLGs mode of protected interface (force(0),preferred(1),none(2)). |
| T/F zxMplsTEGlobalCfgNodeHello | 1.3.6.1.4.1.3902.3.6000.204.1.1.26 | TruthValue | read-write | If this object is true, then it enables the Node Hello. |
| INT zxMplsTEGlobalCfgDsteModel | 1.3.6.1.4.1.3902.3.6000.204.1.1.27 | INTEGER | read-write | DS-TE bandwidth reserve model. |
| INT zxMplsTEGlobalCfgFrrProm | 1.3.6.1.4.1.3902.3.6000.204.1.1.28 | INTEGER | read-write | Fast reroute timers promotion enable. |
| INT zxMplsTEGlobalCfgCleanDelayTime | 1.3.6.1.4.1.3902.3.6000.204.1.1.29 | INTEGER | read-write | The tunnels wait timer 0~600 (s),then delete old lsp. |
| INT zxMplsTEGlobalCfgInstallDelayTime | 1.3.6.1.4.1.3902.3.6000.204.1.1.30 | INTEGER | read-write | The tunnels wait timer 0~600 (s),then install the active lsp. |
| U32 zxMplsTEGlobalCfgUnactiveTime | 1.3.6.1.4.1.3902.3.6000.204.1.1.31 | Unsigned32 | read-write | Wait the timer 30~300 (s) ,then attempt to active the down tunnels. |
| T/F zxMplsTEGlobalCfgGrExtend | 1.3.6.1.4.1.3902.3.6000.204.1.1.32 | TruthValue | read-write | If this object is true, then it enables extend recovery-path. |
| T/F zxMplsTEGlobalCfgReoptLooseNode | 1.3.6.1.4.1.3902.3.6000.204.1.1.33 | TruthValue | read-write | Enable or disable loose node reoptimize. |
| INT zxMplsTEGlobalCfgCrankbackLimit | 1.3.6.1.4.1.3902.3.6000.204.1.1.34 | INTEGER | read-write | Limited times for crankback retrying. |
| U32 zxMplsTEGlobalCfgCrankbackTtl | 1.3.6.1.4.1.3902.3.6000.204.1.1.35 | Unsigned32 | read-write | TTL for crankback information. |
| INT zxMplsTEGlobalCfgAutoBckSrlgExMo | 1.3.6.1.4.1.3902.3.6000.204.1.1.36 | INTEGER | read-write | Auto backup tunnels avoid avoid SRLGs mode of protected interface (none(0),force(1), preferred(2)). |
| INT zxMplsTEGlobalCfgFacFrrSrlgExMo | 1.3.6.1.4.1.3902.3.6000.204.1.1.37 | INTEGER | read-write | Facility fast route tunnel avoid SRLGs mode of protected interface (none(0),force(1), preferred(2)). |
| INT zxMplsTEGlobalCfgHsbSrlgExMo | 1.3.6.1.4.1.3902.3.6000.204.1.1.38 | INTEGER | read-write | Hotstandby tunnels avoid SRLGs mode of protected main links (none(0),force(1), preferred(2)). |
| INT zxMplsTEGlobalCfgDetourSrlgExMo | 1.3.6.1.4.1.3902.3.6000.204.1.1.39 | INTEGER | read-write | Detour fast route tunnel avoid SRLGs mode of protected interface (none(0),force(1), preferred(2)). |
| U32 zxMplsTEGlobalCfgDelaySwOver | 1.3.6.1.4.1.3902.3.6000.204.1.1.40 | Unsigned32 | read-write | Delay time for switch-over. |
| U32 zxMplsTEGlobalCfgDelayReact | 1.3.6.1.4.1.3902.3.6000.204.1.1.41 | Unsigned32 | read-write | Delay time for reactive. |
| U32 zxMplsTEGlobalCfgDelayLinkUp | 1.3.6.1.4.1.3902.3.6000.204.1.1.42 | Unsigned32 | read-write | Delay time for link-up. |
| INT zxMplsTEGlobalCfgSoftPreempt | 1.3.6.1.4.1.3902.3.6000.204.1.1.43 | INTEGER | read-write | Specify timeout for soft-preemption. |
| INT zxMplsTEGlobalCfgSD | 1.3.6.1.4.1.3902.3.6000.204.1.1.44 | INTEGER | read-write | Enable RSVP SD. |
| U32 zxMplsTEGlobalCfgSDInterval | 1.3.6.1.4.1.3902.3.6000.204.1.1.45 | Unsigned32 | read-write | interval between sd alarm 10~30(s). |
| INT zxMplsTEGlobalCfgWithoutCspf | 1.3.6.1.4.1.3902.3.6000.204.1.1.46 | INTEGER | read-write | Build path ERO without CSPF. |
| INT zxMplsTEGlobalCfgCspfBestEffort | 1.3.6.1.4.1.3902.3.6000.204.1.1.47 | INTEGER | read-write | Enable best-effort CSPF without bandwidth requirement. |
| INT zxMplsTEGlobalCfgCspfPrefer | 1.3.6.1.4.1.3902.3.6000.204.1.1.48 | INTEGER | read-write | Specify preferred igp protocol for CSPF. |
| INT zxMplsTEGlobalCfgGS | 1.3.6.1.4.1.3902.3.6000.204.1.1.49 | INTEGER | read-write | Enable RSVP GS. |
| T/F zxMplsTEGlobalCfgMetricAbility | 1.3.6.1.4.1.3902.3.6000.204.1.1.50 | TruthValue | read-write | Enable RSVP Metric Ability. |
| zxMplsTEGlobalOper | 1.3.6.1.4.1.3902.3.6000.204.1.2 | |||
| INT zxMplsTEGlobalOperFrrPromAtOnce | 1.3.6.1.4.1.3902.3.6000.204.1.2.1 | INTEGER | read-write | This value identifies the rsvp manual frr promote at once. |
| INT zxMplsTEGlobalOperReoptimizeAll | 1.3.6.1.4.1.3902.3.6000.204.1.2.2 | INTEGER | read-write | This value identifies the manual reoptimize all the tunnel . |
| U32 zxMplsTEGlobalOperReoptimizeTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.2.3 | Unsigned32 | read-write | This value identifies the manual reoptimize the tunnel . |
| INT zxMplsTEGlobalOperClearRsvp | 1.3.6.1.4.1.3902.3.6000.204.1.2.4 | INTEGER | read-write | This value identifies the clear mpls rsvp . |
| zxMplsTEAccTunnelCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.3 | not-accessible | ||
| zxMplsTEAccTunnelCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.3.1 | not-accessible | ||
| STR zxMplsTEAccTunnelCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.1 | DisplayString | not-accessible | Access tunnel name. |
| U32 zxMplsTEAccTunnelCfgTunnelId | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.2 | Unsigned32 | read-only | Uniquely identifies a set of access tunnel instances . |
| INT zxMplsTEAccTunnelCfgDirectionType | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.3 | INTEGER | read-create | This value signifies the direction of the access tunnel. |
| INT zxMplsTEAccTunnelCfgRole | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.4 | INTEGER | read-create | This value signifies the role that this access tunnel entry/instance represents. |
| U32 zxMplsTEAccTunnelCfgIngressTunnelId | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.5 | Unsigned32 | read-create | The access tunnel's ingress tunnel id. |
| IP zxMplsTEAccTunnelCfgIngressLSRId | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.6 | IpAddress | read-create | Identity of the access tunnel ingress LSR . |
| IP zxMplsTEAccTunnelCfgEgressLSRId | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.7 | IpAddress | read-create | Identity of the access tunnel egress LSR . |
| I32 zxMplsTEAccTunnelCfgPolicyClass | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.8 | Integer32 | read-only | The minimal configured policy class on the access tunnel. |
| ROW zxMplsTEAccTunnelCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.9 | RowStatus | read-create | Row status. |
| INT zxMplsTEAccTunnelCfgTnnlEnable | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.10 | INTEGER | read-create | If this object is true, then activate the tunnel. |
| INT zxMplsTEAccTunnelCfgUlimitDiscard | 1.3.6.1.4.1.3902.3.6000.204.1.3.1.11 | INTEGER | read-create | If this tunnel enables ultralimit discard, this value is enabled, otherwise it is disabled. |
| zxMplsTETunnelCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.4 | not-accessible | ||
| zxMplsTETunnelCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.4.1 | not-accessible | ||
| STR zxMplsTETunnelCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.1 | DisplayString | not-accessible | Tunnel name. |
| U32 zxMplsTETunnelCfgTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.2 | Unsigned32 | read-only | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. |
| IP zxMplsTETunnelCfgEgressLSRId | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.3 | IpAddress | read-create | Identity of the egress LSR associated with this tunnel instance. |
| I32 zxMplsTETunnelCfgSetupPrio | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.4 | Integer32 | read-create | Indicates the setup priority of this tunnel. |
| I32 zxMplsTETunnelCfgHoldingPrio | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.5 | Integer32 | read-create | Indicates the holding priority of this tunnel. |
| INT zxMplsTETunnelCfgFrrFacility | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.6 | INTEGER | read-create | If this tunnel enables facility FRR,this value is true, otherwise it is false. |
| INT zxMplsTETunnelCfgFrrDetour | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.7 | INTEGER | read-create | If this tunnel enables detour FRR,this value is true,otherwise it is false. |
| INT zxMplsTETunnelCfgAutoRoute | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.8 | INTEGER | read-create | If this object is true, then it enables the Autoroute. |
| INT zxMplsTETunnelCfgARMetricType | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.9 | INTEGER | read-create | Indicates the autoroute metric type over this tunnel. |
| I32 zxMplsTETunnelCfgARRelaMetric | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.10 | Integer32 | read-create | Indicates the value that adjust metric for autoroutes relative to IGP. |
| U32 zxMplsTETunnelCfgARAbsMetric | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.11 | Unsigned32 | read-create | Indicates the value for all autoroutes over tunnel. |
| INT zxMplsTETunnelCfgRecordRoute | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.12 | INTEGER | read-create | If this object is true, then it enables the RecordRoute. |
| INT zxMplsTETunnelCfgBfdEnable | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.13 | INTEGER | read-create | If this object is true, then it enables bfd on the tunnel. |
| U32 zxMplsTETunnelCfgBfdDeteMultiplier | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.14 | Unsigned32 | read-create | The detecting multiple of receive/send CONTROL. |
| U32 zxMplsTETunnelCfgBFDMinTxInterval | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.15 | Unsigned32 | read-create | The minimal time to send CONTROL message. |
| U32 zxMplsTETunnelCfgBFDMinRxInterval | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.16 | Unsigned32 | read-create | The minimal time to receive CONTROL message. |
| INT zxMplsTETunnelCfgCoRoute | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.17 | INTEGER | read-create | If this object is true, then the tunnel is co-route bidirection. |
| U32 zxMplsTETunnelCfgBandwidth | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.18 | Unsigned32 | read-create | The bandwidth of this tunnel. |
| U32 zxMplsTETunnelCfgBackupBandwidth | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.19 | Unsigned32 | read-create | The backup bandwidth of this tunnel. |
| INT zxMplsTETunnelCfgFAEnable | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.20 | INTEGER | read-create | If this object is true, then it enables forwarding adjacency. |
| U32 zxMplsTETunnelCfgFAHoldtime | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.21 | Unsigned32 | read-create | The forwarding adjacency hold time of this tunnel. |
| U32 zxMplsTETunnelCfgAdminWeight | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.22 | Unsigned32 | read-create | The administrative weight of this tunnel. |
| INT zxMplsTETunnelCfgAutoBW | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.23 | INTEGER | read-create | If object is 1,auto bandwidth adjustment enable and adjust bandwidth. |
| U32 zxMplsTETunnelCfgAutoBWFrequency | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.24 | Unsigned32 | read-create | The auto bandwidth adjustment frequency of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWMinValue | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.25 | Unsigned32 | read-create | The auto bandwidth adjustment minimal bandwidth of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWMaxValue | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.26 | Unsigned32 | read-create | The auto bandwidth adjustment maximal bandwidth of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWAdjMultiple | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.27 | Unsigned32 | read-create | The auto bandwidth adjustment multiple of this tunnel. |
| I32 zxMplsTETunnelCfgPolicyClass | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.28 | Integer32 | read-only | The minimal configured policy class of this tunnel. |
| ROW zxMplsTETunnelCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.29 | RowStatus | read-create | Row status. |
| U32 zxMplsTETunnelCfgCBS | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.30 | Unsigned32 | read-create | The committed burst size of this tunnel. |
| U32 zxMplsTETunnelCfgEIR | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.31 | Unsigned32 | read-create | The excess information rate of this tunnel. |
| U32 zxMplsTETunnelCfgEBS | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.32 | Unsigned32 | read-create | The excess burst size of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWThresholdPer | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.33 | Unsigned32 | read-create | The auto bandwidth overflow percent of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWThresholdMin | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.34 | Unsigned32 | read-create | The auto bandwidth overflow bandwidth of this tunnel. |
| U32 zxMplsTETunnelCfgAutoBWThresholdLimit | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.35 | Unsigned32 | read-create | The auto bandwidth overflow limit of this tunnel. |
| INT zxMplsTETunnelCfgAutoBWcollectbw | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.36 | INTEGER | read-create | If object is 1,auto bandwidth collect enable but not adjust bandwidth. |
| T/F zxMplsTETunnelCfgMainlspReopt | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.37 | TruthValue | read-create | If this tunnel enables main-lsp auto-reoptimize, this value is true,otherwise it is false. |
| T/F zxMplsTETunnelCfgHsblspFrr | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.38 | TruthValue | read-create | If this tunnel enables hot-standby-lsp Frr, this value is true,otherwise it is false. |
| T/F zxMplsTETunnelCfgRefenceHsbPath | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.39 | TruthValue | read-create | If this tunnel enables reference hsb-path, this value is true,otherwise it is false. |
| T/F zxMplsTETunnelCfgBwProtectEnable | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.40 | TruthValue | read-create | If this tunnel enables FRR bandwidth protection, this value is true, otherwise it is false. |
| T/F zxMplsTETunnelCfgCrankbackEnable | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.41 | TruthValue | read-create | If this tunnel enables crankback, this value is true,otherwise it is false. |
| U32 zxMplsTETunnelCfgAssocTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.42 | Unsigned32 | read-create | The associate reverse tunnel id of this dynamic tunnel. |
| U32 zxMplsTETunnelCfgHopsLimit | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.43 | Unsigned32 | read-create | Configure the maximum number of tunnel's hops. |
| INT zxMplsTETunnelCfgHopsPrior | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.44 | INTEGER | read-create | Enable few hops of the path select firstly. |
| T/F zxMplsTETunnelCfgSoftPreemption | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.45 | TruthValue | read-create | If this tunnel enables soft preemption, this value is true, otherwise it is false. |
| INT zxMplsTETunnelCfgResvStyle | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.46 | INTEGER | read-create | The resv-style of this dynamic tunnel. |
| STR zxMplsTETunnelCfgSessName | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.47 | DisplayString | read-create | Tunnel session name. |
| INT zxMplsTETunnelCfgTnnlEnable | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.48 | INTEGER | read-create | If this object is true, then activate the tunnel. |
| T/F zxMplsTETunnelCfgHsblspReopt | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.49 | TruthValue | read-create | If this tunnel enables hotstandby-lsp auto-reoptimize, this value is true,otherwise it is false. |
| T/F zxMplsTETunnelCfgWithoutCspf | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.50 | TruthValue | read-create | Build path ERO without CSPF. |
| STR zxMplsTETunnelCfgTrackName | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.51 | DisplayString | read-create | The track name of the TE tunnel used. |
| T/F zxMplsTETunnelCfgEscapePath | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.52 | TruthValue | read-create | Escape path configuration of dynamic tunnel. |
| INT zxMplsTETunnelCfgUlimitDiscard | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.53 | INTEGER | read-create | If this tunnel enables ultralimit discard, this value is enabled, otherwise it is disabled. |
| T/F zxMplsTETunnelCfgE2EProtect | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.54 | TruthValue | read-create | E2E protect configuration of dynamic bi-tunnel. |
| T/F zxMplsTETunnelCfgAutoRouteIpv6 | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.55 | TruthValue | read-create | If this object is true, then it enables the Autoroute ipv6. |
| T/F zxMplsTETunnelCfgFAIpv6 | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.56 | TruthValue | read-create | If this object is true, then it enables forwarding adjacency ipv6. |
| T/F zxMplsTETunnelCfgPCEInit | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.57 | TruthValue | read-create | PCE-Init configuraion of dynamic tunnel. |
| T/F zxMplsTETunnelCfgActiveLspBfd | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.58 | TruthValue | read-create | If this object is true, then it enables active-lsp bfd. |
| T/F zxMplsTETunnelCfgAdvNoneNull | 1.3.6.1.4.1.3902.3.6000.204.1.4.1.59 | TruthValue | read-create | If this object is true, then it enables adertise none-null for this tunnel. |
| zxMplsTEDsteCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.5 | not-accessible | ||
| zxMplsTEDsteCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.5.1 | not-accessible | ||
| STR zxMplsTEDsteCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.5.1.1 | DisplayString | not-accessible | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port.If mplsTETunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to mplsTETunnelName. Also see the description of ifName in RFC 2863. |
| U32 zxMplsTEDsteCfgClassType | 1.3.6.1.4.1.3902.3.6000.204.1.5.1.2 | Unsigned32 | not-accessible | The dste class type of this tunnel. |
| U32 zxMplsTEDsteCfgBandwidth | 1.3.6.1.4.1.3902.3.6000.204.1.5.1.3 | Unsigned32 | read-create | The dste bandwidth of this tunnel. |
| ROW zxMplsTEDsteCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.5.1.4 | RowStatus | read-create | row status. |
| zxMplsTEIfCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.6 | not-accessible | A list of mpls traffic-eng interface entries. | |
| zxMplsTEIfCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.6.1 | not-accessible | An entry containing mpls traffic-eng interface. | |
| STR zxMplsTEIfCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.1 | DisplayString | not-accessible | The name of this interface. |
| U32 zxMplsTEIfCfgIfIndex | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.2 | Unsigned32 | read-only | A unique value, greater than zero, for each interface which enables mpls traffic-eng. |
| INT zxMplsTEIfCfgBfdEnable | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.3 | INTEGER | read-create | If this interface enables bfd,this value is true,otherwise it is false. |
| INT zxMplsTEIfCfgAuthenti | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.4 | INTEGER | read-create | If this interface enables RSVP cryptographic authentication, this value is true,otherwise it is false. |
| INT zxMplsTEIfCfgAuthChallage | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.5 | INTEGER | read-create | If this interface as a receiver enables rsvp authentication challenge,this value is true,otherwise it is false. |
| INT zxMplsTEIfCfgAuthChallageImp | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.6 | INTEGER | read-create | If this interface as a sender enables rsvp authentication challenge,this value is true,otherwise it is false. |
| STR zxMplsTEIfCfgAuthKey | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.7 | DisplayString | read-create | Specifies shared secret for all neighbors on this interface. |
| INT zxMplsTEIfCfgAuthType | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.8 | INTEGER | read-create | Specifies the type of authentication algorithm on this interface. |
| I32 zxMplsTEIfCfgAuthWinSize | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.9 | Integer32 | read-create | Specifies received window size for authenticated messages on this interface. |
| U32 zxMplsTEIfCfgAdminWeight | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.10 | Unsigned32 | read-create | The config metric of mpls te interface. |
| INT zxMplsTEIfCfgAutoBackup | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.11 | INTEGER | read-create | If this object is true, then it prefers NODE_PROTECT to LINK_PROTECT by autobackup tunnel. |
| INT zxMplsTEIfCfgAutobackNHoponly | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.12 | INTEGER | read-create | If this object is true, then it only requires LINK_PROTECT by autobackup tunnel. |
| INT zxMplsTEIfCfgHelloRefresh | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.13 | INTEGER | read-create | If this object is true, then the interface hello refresh is enable. |
| U32 zxMplsTEIfCfgHelloRefInterval | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.14 | Unsigned32 | read-create | hello refresh interval on if. |
| U32 zxMplsTEIfCfgHelloRefMisses | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.15 | Unsigned32 | read-create | hello refresh misses on if. |
| ROW zxMplsTEIfCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.16 | RowStatus | read-create | row status. |
| U32 zxMplsTEIfCfgConvRatioValue | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.17 | Unsigned32 | read-create | Interface's convergence ratio value. |
| U32 zxMplsTEIfCfgDscpValue | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.18 | Unsigned32 | read-create | The dscp value of the interface. |
| INT zxMplsTEIfCfgGS | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.19 | INTEGER | read-create | Enable interface RSVP GS. |
| STR zxMplsTEIfCfgAuthKeyChain | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.20 | DisplayString | read-create | Specifies key chain for all neighbors on this interface. |
| INT zxMplsTEIfCfgAuthMode | 1.3.6.1.4.1.3902.3.6000.204.1.6.1.21 | INTEGER | read-create | Specifies the mode of authentication on this interface. |
| zxMplsTEIfSrlgCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.7 | not-accessible | ||
| zxMplsTEIfSrlgCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.7.1 | not-accessible | ||
| STR zxMplsTEIfSrlgCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.7.1.1 | DisplayString | not-accessible | The name of this interface. |
| U32 zxMplsTEIfSrlgCfgSrlgID | 1.3.6.1.4.1.3902.3.6000.204.1.7.1.2 | Unsigned32 | not-accessible | The SRLG value on this interface. |
| ROW zxMplsTEIfSrlgCfgRowSta | 1.3.6.1.4.1.3902.3.6000.204.1.7.1.3 | RowStatus | read-create | |
| zxMplsTEIfBackupTunnelCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.8 | not-accessible | ||
| zxMplsTEIfBackupTunnelCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.8.1 | not-accessible | ||
| STR zxMplsTEIfBackupTunnelCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.8.1.1 | DisplayString | not-accessible | The name of this interface. |
| U32 zxMplsTEIfBackupTunnelCfgBakTID | 1.3.6.1.4.1.3902.3.6000.204.1.8.1.2 | Unsigned32 | not-accessible | The back up tunnel for this interface. |
| ROW zxMplsTEIfBackupTunnelCfgRowSta | 1.3.6.1.4.1.3902.3.6000.204.1.8.1.3 | RowStatus | read-create | |
| zxMplsTEIfPassiveCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.9 | not-accessible | ||
| zxMplsTEIfPassiveCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.9.1 | not-accessible | ||
| STR zxMplsTEIfPassiveIfName | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.1 | DisplayString | not-accessible | A unique value, greater than zero, used by interface to get the passive attributes configure. |
| IP zxMplsTEIfPassiveNbrRID | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.2 | IpAddress | not-accessible | The passive interface neighbor TE ID. |
| IP zxMplsTEIfPassiveNbrIfAddress | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.3 | IpAddress | read-create | The passive interface neighbor interface address. |
| IP zxMplsTEIfPassiveNbrOspfNodeId | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.4 | IpAddress | read-create | The passive interface neighbor ospf node id. |
| MAC zxMplsTEIfPassiveNbrIsisSystemId | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.5 | MacAddress | read-create | The passive interface neighbor isis system id. |
| ROW zxMplsTEIfPassiveRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.6 | RowStatus | read-create | row status. |
| INT zxMplsTEIfPassiveNbrIsisFlag | 1.3.6.1.4.1.3902.3.6000.204.1.9.1.7 | INTEGER | read-only | If this object is true, then the passive interface neighbor isis system id is configured. |
| zxMplsTEExplicitPathNCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.10 | not-accessible | ||
| zxMplsTEExplicitPathNCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.10.1 | not-accessible | ||
| STR zxMplsTEExplicitPathNCfgName | 1.3.6.1.4.1.3902.3.6000.204.1.10.1.1 | DisplayString | not-accessible | Uniquely identifies the name of the explicit-path. |
| ROW zxMplsTEExplicitPathNCfgRowSta | 1.3.6.1.4.1.3902.3.6000.204.1.10.1.2 | RowStatus | read-create | |
| zxMplsTEExplicitPathIDCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.11 | not-accessible | ||
| zxMplsTEExplicitPathIDCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.11.1 | not-accessible | ||
| U32 zxMplsTEExplicitPathIDCfgIdentifer | 1.3.6.1.4.1.3902.3.6000.204.1.11.1.1 | Unsigned32 | not-accessible | Uniquely identifies the id of the explicit-path. |
| ROW zxMplsTEExplicitPathIDCfgRowSta | 1.3.6.1.4.1.3902.3.6000.204.1.11.1.2 | RowStatus | read-create | |
| zxMplsTEExplicitRouteNCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.12 | not-accessible | ||
| zxMplsTEExplicitRouteNCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.12.1 | not-accessible | ||
| STR zxMplsTEExplicitRouteNCfgName | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.1 | DisplayString | not-accessible | Uniquely identifies the name of the explicit-path. |
| U32 zxMplsTEExplicitRouteNCfgIndex | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.2 | Unsigned32 | not-accessible | Uniquely identifier the index of the name of explicit-path. |
| IP zxMplsTEExplicitRouteNCfgNextIP | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.3 | IpAddress | read-create | This value identifies the next hop IP address of the name of explicit-path. |
| INT zxMplsTEExplicitRouteNCfgHopType | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.4 | INTEGER | read-create | This value identifies the hop type of the explicit-path address,1:include,2:exclude,3:avoid. |
| INT zxMplsTEExplicitRouteNCfgHopAttribute | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.5 | INTEGER | read-create | This value identifies the hop attribute of the explicit-path address,1:strict ,2:loose,3:interface;4:routerid. |
| ROW zxMplsTEExplicitRouteNCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.12.1.6 | RowStatus | read-create | Row status. |
| zxMplsTEExplicitRouteIDCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.13 | not-accessible | ||
| zxMplsTEExplicitRouteIDCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.13.1 | not-accessible | ||
| U32 zxMplsTEExplicitRouteIDCfgIdentifer | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.1 | Unsigned32 | not-accessible | Uniquely identifies the id of the explicit-path. |
| U32 zxMplsTEExplicitRouteIDCfgIndex | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.2 | Unsigned32 | not-accessible | Uniquely identifier the index of the id of explicit-path. |
| IP zxMplsTEExplicitRouteIDCfgNextIP | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.3 | IpAddress | read-create | This value identifies the next hop IP address of the id of explicit-path. |
| INT zxMplsTEExplicitRouteIDCfgHopType | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.4 | INTEGER | read-create | This value identifies the hop type of the explicit-path address,1:include,2:exclude,3:avoid. |
| INT zxMplsTEExplicitRouteIDCfgHopAttribute | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.5 | INTEGER | read-create | This value identifies the hop attribute of the explicit-path address,1:strict ,2:loose,3:interface;4:routerid. |
| ROW zxMplsTEExplicitRouteIDCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.13.1.6 | RowStatus | read-create | Row status. |
| zxMplsTEPathOptCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.14 | not-accessible | ||
| zxMplsTEPathOptCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.14.1 | not-accessible | ||
| STR zxMplsTEPathOptCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.1 | DisplayString | not-accessible | Uniquely identifies the name of the tunnel. |
| U32 zxMplsTEPathOptCfgNumber | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.2 | Unsigned32 | not-accessible | Uniquely identifies the path-option num which the tunnel have,the list is from 1 to 16. |
| INT zxMplsTEPathOptCfgPathType | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.3 | INTEGER | read-create | This value identifier the type of the path-option,include about three type,such as: 1:dynamic;2:explicitID,3:explicitName. |
| STR zxMplsTEPathOptCfgExpPathName | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.4 | DisplayString | read-create | This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null. |
| U32 zxMplsTEPathOptCfgExpPathID | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.5 | Unsigned32 | read-create | This value identifier the ID of the path-option,when the type of the path-option is explicitID,the other times the value is 0. |
| INT zxMplsTEPathOptCfgLockDown | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.6 | INTEGER | read-create | This value identifier the path-option has been config lockdown. |
| ROW zxMplsTEPathOptCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.14.1.7 | RowStatus | read-create | Row status. |
| zxMplsTEHotStandbyCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.15 | not-accessible | ||
| zxMplsTEHotStandbyCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.15.1 | not-accessible | ||
| STR zxMplsTEHotStandbyCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.1 | DisplayString | not-accessible | The index of path option which equals to tunnel name. |
| U32 zxMplsTEHotStandbyCfgProtOptNo | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.2 | Unsigned32 | not-accessible | Secondary index which identifies the configure value of path option. |
| INT zxMplsTEHotStandbyCfgPathType | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.3 | INTEGER | read-create | Specifies the hotstandby protect type of the path_option. |
| STR zxMplsTEHotStandbyCfgExpPathName | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.4 | DisplayString | read-create | This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null. |
| U32 zxMplsTEHotStandbyCfgExpPathID | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.5 | Unsigned32 | read-create | This value identifier the ID of the path-option,when the type of the path-option is explicitID,the other times the value is 0. |
| INT zxMplsTEHotStandbyCfgDynaPrefer | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.6 | INTEGER | read-create | Specifies the backup lsp path is as same as its primary lsp. |
| ROW zxMplsTEHotStandbyCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.7 | RowStatus | read-create | Row status. |
| T/F zxMplsTEHotStandbyCfgExpPathExclude | 1.3.6.1.4.1.3902.3.6000.204.1.15.1.8 | TruthValue | read-create | The backup lsp path is whether or not to exclude the primary path. False means not exclude.True means exclude. The default value is false. |
| zxMplsTEStaticTunnelCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.16 | not-accessible | ||
| zxMplsTEStaticTunnelCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.16.1 | not-accessible | ||
| STR zxMplsStaticTunnelCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.1 | DisplayString | not-accessible | tunnel name. |
| U32 zxMplsStaticTunnelCfgTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.2 | Unsigned32 | read-only | Uniquely identifies a set of static tunnel instances between a pair of ingress and egress LSRs. |
| INT zxMplsStaticTunnelCfgDirectionType | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.3 | INTEGER | read-create | This value signifies the direction of the static tunnel. |
| INT zxMplsStaticTunnelCfgTunnelRole | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.4 | INTEGER | read-create | This value signifies the role that this static tunnel entry/instance represents. |
| U32 zxMplsStaticTunnelCfgIngressTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.5 | Unsigned32 | read-create | The static tunnel's ingress tunnel id. |
| IP zxMplsStaticTunnelCfgIngressLSRID | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.6 | IpAddress | read-create | Identity of the ingress LSR . |
| IP zxMplsStaticTunnelCfgEgressLSRID | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.7 | IpAddress | read-create | Identity of the egress LSR . |
| I32 zxMplsStaticTunnelCfgPolicyClass | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.8 | Integer32 | read-only | The minimal configured policy class on the tunnel. |
| STR zxMplsStaticTunnelCfgTrackName | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.9 | DisplayString | read-create | The track name of the static tunnel used. |
| ROW zxMplsStaticTunnelCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.10 | RowStatus | read-create | row status. |
| T/F zxMplsStaticTunnelCfgAutoRoute | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.11 | TruthValue | read-create | If this object is true, then it enables the Autoroute. |
| INT zxMplsStaticTunnelCfgARMtrType | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.12 | INTEGER | read-create | Indicates the autoroute metric type over this tunnel. |
| I32 zxMplsStaticTunnelCfgARRelaMtr | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.13 | Integer32 | read-create | Indicates the value that adjust metric for autoroutes relative to IGP. |
| U32 zxMplsStaticTunnelCfgARAbsMtr | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.14 | Unsigned32 | read-create | Indicates the value for all autoroutes over tunnel. |
| T/F zxMplsStaticTunnelCfgFAEnable | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.15 | TruthValue | read-create | If this object is true, then it enables forwarding adjacency. |
| U32 zxMplsStaticTunnelCfgFAHoldtime | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.16 | Unsigned32 | read-create | The forwarding adjacency hold time of this tunnel. |
| U32 zxMplsStaticTunnelCfgAssocTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.17 | Unsigned32 | read-create | The associate reverse tunnel id of this static tunnel. |
| INT zxMplsStaticTunnelCfgReserveMode | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.19 | INTEGER | read-create | The bandwidth reserve mode of this static tunnel. |
| INT zxMplsStaticTunnelCfgTnnlEnable | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.20 | INTEGER | read-create | If this object is true, then activate the tunnel. |
| INT zxMplsStaticTunnelCfgULDiscard | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.21 | INTEGER | read-create | If this object is true, then activate ultralimit discard. |
| T/F zxMplsStaticTunnelCfgARIpv6 | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.22 | TruthValue | read-create | If this object is true, then it enables the Autoroute ipv6. |
| T/F zxMplsStaticTunnelCfgFAIpv6 | 1.3.6.1.4.1.3902.3.6000.204.1.16.1.23 | TruthValue | read-create | If this object is true, then it enables forwarding adjacency ipv6. |
| zxMplsTEStaticLspCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.17 | not-accessible | ||
| zxMplsTEStaticLspCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.17.1 | not-accessible | ||
| U32 zxMplsStaticLspCfgTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of static tunnel instances between a pair of ingress and egress LSRs. |
| U32 zxMplsStaticLspCfgLSPID | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.2 | Unsigned32 | not-accessible | Uniquely identifies a static tunnel lsp. |
| STR zxMplsStaticLspCfgInPort | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.3 | DisplayString | read-create | The entry interface name of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgInLabel | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.4 | Unsigned32 | read-create | The entry label of the forward direction static lsp. |
| STR zxMplsStaticLspCfgOutPort | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.5 | DisplayString | read-create | Out interface name of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgOutLabel | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.6 | Unsigned32 | read-create | Out label of the forward direction static lsp. |
| IP zxMplsStaticLspCfgNextHop | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.7 | IpAddress | read-create | The next hop of the forward direction static lsp. |
| STR zxMplsStaticLspCfgReverseInPort | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.8 | DisplayString | read-create | The entry interface name of the reverse direction static lsp. |
| U32 zxMplsStaticLspCfgReverseInLabel | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.9 | Unsigned32 | read-create | The entry label of the reverse direction static lsp. |
| STR zxMplsStaticLspCfgReverseOutPort | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.10 | DisplayString | read-create | Out interface name of the reverse direction static lsp. |
| U32 zxMplsStaticLspCfgReverseOutLabel | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.11 | Unsigned32 | read-create | Out label of the reverse direction static lsp. |
| IP zxMplsStaticLspCfgReverseNextHop | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.12 | IpAddress | read-create | The next hop of the reverse direction static lsp. |
| ROW zxMplsStaticLspCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.13 | RowStatus | read-create | row status. |
| U32 zxMplsStaticLspCfgOutBandwith | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.14 | Unsigned32 | read-create | The out bandwidth of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgOutPeak | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.15 | Unsigned32 | read-create | The out peak of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgOutBurst | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.16 | Unsigned32 | read-create | The out burst of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgOutExcessBurst | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.17 | Unsigned32 | read-create | The out excess burst of the forward direction static lsp. |
| U32 zxMplsStaticLspCfgReverseOutBandwith | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.18 | Unsigned32 | read-create | The out bandwidth of the reverse direction static lsp. |
| U32 zxMplsStaticLspCfgReverseOutPeak | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.19 | Unsigned32 | read-create | The out peak of the reverse direction static lsp. |
| U32 zxMplsStaticLspCfgReverseOutBurst | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.20 | Unsigned32 | read-create | The out burst of the reverse direction static lsp. |
| U32 zxMplsStaticLspCfgReverseOutExcessBurst | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.21 | Unsigned32 | read-create | The out excess burst of the reverse direction static lsp. |
| STR zxMplsStaticLspCfgShareTnnl | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.22 | DisplayString | read-create | The shared tunnel name of the forward direction static lsp. |
| STR zxMplsStaticLspCfgRvShareTnnl | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.27 | DisplayString | read-create | The shared tunnel name of the reverse direction static lsp. |
| INT zxMplsStaticLspCfgCratioMode | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.28 | INTEGER | read-create | The convergence ratio mode of the forward direction static lsp. |
| I32 zxMplsStaticLspCfgCratioValue | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.29 | Integer32 | read-create | The convergence ratio value of the forward direction static lsp. |
| INT zxMplsStaticLspCfgRvCratioMode | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.30 | INTEGER | read-create | The convergence ratio mode of the reverse direction static lsp. |
| I32 zxMplsStaticLspCfgRvCratioValue | 1.3.6.1.4.1.3902.3.6000.204.1.17.1.31 | Integer32 | read-create | The convergence ratio value of the reverse direction static lsp. |
| zxMplsTEStaticTunnelStatusTable | 1.3.6.1.4.1.3902.3.6000.204.1.18 | not-accessible | ||
| zxMplsTEStaticTunnelStatusEntry | 1.3.6.1.4.1.3902.3.6000.204.1.18.1 | not-accessible | ||
| U32 zxMplsStaticTunnelStatusTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of static tunnel instances between a pair of ingress and egress LSRs. |
| INT zxMplsStaticTunnelStatusProtStat | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.2 | INTEGER | read-only | This value identifies actual operational status of this static tunnel. |
| INT zxMplsStaticTunnelStatusAdminStat | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.3 | INTEGER | read-only | This value identifies the administrator status of this static tunnel. |
| INT zxMplsStaticTunnelStatusAssoc | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.4 | INTEGER | read-only | This value identifies the associate bidirect status of this static tunnel. |
| U32 zxMplsStaticTunnelStatusTnnlUtil | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.5 | Unsigned32 | read-only | This value identifies the bandwidth utilization of this static tunnel. It's default value is 4294967295. |
| U32 zxMplsStaticTunnelStatusUtilIn | 1.3.6.1.4.1.3902.3.6000.204.1.18.1.6 | Unsigned32 | read-only | This value identifies the bandwidth in utilization of this static tunnel. It's default value is 4294967295. |
| zxMplsTEStaticLspStatusTable | 1.3.6.1.4.1.3902.3.6000.204.1.19 | not-accessible | ||
| zxMplsTEStaticLspStatusEntry | 1.3.6.1.4.1.3902.3.6000.204.1.19.1 | not-accessible | ||
| U32 zxMplsStaticLspStatusTunnelId | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of static tunnel instances between a pair of ingress and egress LSRs. |
| U32 zxMplsStaticLspStatusLspId | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.2 | Unsigned32 | not-accessible | Uniquely identifies a static tunnel lsp. |
| U32 zxMplsStaticLspStatusInIfIndex | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.3 | Unsigned32 | read-only | The entry interface index of the forward direction static lsp. |
| U32 zxMplsStaticLspStatusOutIfindex | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.4 | Unsigned32 | read-only | Out interface index of the forward direction static lsp. |
| U32 zxMplsStaticLspStatusReverseInIntf | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.5 | Unsigned32 | read-only | The entry interface index of the reverse direction static lsp. |
| U32 zxMplsStaticLspStatusReverseOutIntf | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.6 | Unsigned32 | read-only | Out interface index of the reverse direction static lsp. |
| INT zxMplsStaticLspStatusProtStat | 1.3.6.1.4.1.3902.3.6000.204.1.19.1.7 | INTEGER | read-only | This value identifies actual operational status of this static tunnel lsp. |
| zxMplsTEAccTunnelStatusTable | 1.3.6.1.4.1.3902.3.6000.204.1.20 | not-accessible | ||
| zxMplsTEAccTunnelStatusEntry | 1.3.6.1.4.1.3902.3.6000.204.1.20.1 | not-accessible | ||
| U32 zxMplsTEAccTunnelStatusTunnelID | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of access tunnel instances between a pair of ingress and egress LSRs. |
| INT zxMplsTEAccTunnelStatusOperStat | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.2 | INTEGER | read-only | This value identifies actual operational status of this access tunnel. |
| INT zxMplsTEAccTunnelStatusAdminStat | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.3 | INTEGER | read-only | This value identifies the administrator status of this access tunnel. |
| INT zxMplsTEAccTunnelStatusAssoc | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.4 | INTEGER | read-only | This value identifies the associate bidirect status of this access tunnel. |
| U32 zxMplsTEAccTunnelStatusUtilize | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.5 | Unsigned32 | read-only | The bw utilize of access tunnel. It's default value is 4294967295. |
| U32 zxMplsTEAccTunnelStatusUtilizeIn | 1.3.6.1.4.1.3902.3.6000.204.1.20.1.6 | Unsigned32 | read-only | The bw in utilize of access tunnel. It's default value is 4294967295. |
| zxMplsTETunnelBfdCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.21 | not-accessible | ||
| zxMplsTETunnelBfdCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.21.1 | not-accessible | ||
| STR zxMplsTETunnelBfdCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.1 | DisplayString | not-accessible | The index of path option which equals to tunnel name. |
| INT zxMplsTETunnelBfdCfgMSAttribute | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.2 | INTEGER | not-accessible | If this value is master ,indicates the entry is primary lsp's bfd configuration;If this value is slave ,indicates the entry is secondary lsp's bfd configuration. |
| U32 zxMplsTETunnelBfdCfgDeteMultiplier | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.3 | Unsigned32 | read-create | The detecting multiple of receive/send CONTROL message. |
| U32 zxMplsTETunnelBfdCfgMinTxInterval | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.4 | Unsigned32 | read-create | The minimal time to send CONTROL message. |
| U32 zxMplsTETunnelBfdCfgMinRxInterval | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.5 | Unsigned32 | read-create | The minimal time to receive CONTROL message. |
| ROW zxMplsTETunnelBfdCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.21.1.6 | RowStatus | read-create | row status. |
| zxMplsTEDSTEClassCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.22 | not-accessible | A list of DS-TE TE-Class entries. | |
| zxMplsTEDSTEClassCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.22.1 | not-accessible | An entry containing DS-TE TE-Class. | |
| U32 zxMplsTEDSTEClassCfgTEClassID | 1.3.6.1.4.1.3902.3.6000.204.1.22.1.1 | Unsigned32 | not-accessible | The TE-Class id. |
| U32 zxMplsTEDSTEClassCfgClassType | 1.3.6.1.4.1.3902.3.6000.204.1.22.1.2 | Unsigned32 | read-create | The class type. |
| U32 zxMplsTEDSTEClassCfgPriority | 1.3.6.1.4.1.3902.3.6000.204.1.22.1.3 | Unsigned32 | read-create | The priority. |
| ROW zxMplsTEDSTEClassCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.22.1.4 | RowStatus | read-create | row status. |
| zxMplsTEIfBwCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.23 | not-accessible | A list of TE interface bandwidth entries. | |
| zxMplsTEIfBwCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.23.1 | not-accessible | An entry containing TE interface bandwidth. | |
| STR zxMplsTEIfBwCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.1 | DisplayString | not-accessible | The name of this interface. |
| INT zxMplsTEIfBwCfgReserveTunnelType | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.2 | INTEGER | not-accessible | The tunnel type of bandwidth reserve. |
| U32 zxMplsTEIfBwCfgIfBw | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.3 | Unsigned32 | read-create | TE interface bandwidth. |
| U32 zxMplsTEIfBwCfgPerFlowBw | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.4 | Unsigned32 | read-create | PerFlow bandwidth. |
| U32 zxMplsTEIfBwCfgBC0 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.5 | Unsigned32 | read-create | TE interface bc0 bandwidth. |
| U32 zxMplsTEIfBwCfgBC1 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.6 | Unsigned32 | read-create | TE interface bc1 bandwidth. |
| U32 zxMplsTEIfBwCfgBC2 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.7 | Unsigned32 | read-create | TE interface bc2 bandwidth. |
| U32 zxMplsTEIfBwCfgBC3 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.8 | Unsigned32 | read-create | TE interface bc3 bandwidth. |
| U32 zxMplsTEIfBwCfgBC4 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.9 | Unsigned32 | read-create | TE interface bc4 bandwidth. |
| U32 zxMplsTEIfBwCfgBC5 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.10 | Unsigned32 | read-create | TE interface bc5 bandwidth. |
| U32 zxMplsTEIfBwCfgBC6 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.11 | Unsigned32 | read-create | TE interface bc6 bandwidth. |
| U32 zxMplsTEIfBwCfgBC7 | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.12 | Unsigned32 | read-create | TE interface bc7 bandwidth. |
| ROW zxMplsTEIfBwCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.13 | RowStatus | read-create | row status. |
| U32 zxMplsTEIfBwCfgPercent | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.14 | Unsigned32 | read-create | The percentage of interface speed. |
| INT zxMplsTEIfBwCfgSpeedBlind | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.15 | INTEGER | read-create | If this interface enables speed blind,this value is enabled, otherwise it is disabled. |
| U32 zxMplsTEIfBwCfgEIR | 1.3.6.1.4.1.3902.3.6000.204.1.23.1.16 | Unsigned32 | read-create | TE interface excess information rate. |
| zxMplsTEGrExtendCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.24 | not-accessible | ||
| zxMplsTEGrExtendCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.24.1 | not-accessible | ||
| IP zxMplsTEGrExtendCfgNbrRid | 1.3.6.1.4.1.3902.3.6000.204.1.24.1.1 | IpAddress | not-accessible | Neighbor router id. |
| ROW zxMplsTEGrExtendCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.24.1.2 | RowStatus | read-create | Row status. |
| zxMplsTERateLimitCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.25 | not-accessible | A list of TE tunnel rate-limit entries. | |
| zxMplsTERateLimitCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.25.1 | not-accessible | An entry containing TE tunnel rate-limit. | |
| STR zxMplsTERateLimitCfgTunnelName | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.1 | DisplayString | not-accessible | Tunnel name. |
| INT zxMplsTERateLimitCfgMode | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.2 | INTEGER | read-create | The rate-limit mode. |
| U32 zxMplsTERateLimitCfgCIR | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.3 | Unsigned32 | read-create | The committed information rate of this tunnel. |
| U32 zxMplsTERateLimitCfgCBS | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.4 | Unsigned32 | read-create | The committed burst size of this tunnel. |
| U32 zxMplsTERateLimitCfgPIR | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.5 | Unsigned32 | read-create | The peak information rate of this tunnel. |
| U32 zxMplsTERateLimitCfgPBS | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.6 | Unsigned32 | read-create | The peak burst size of this tunnel. |
| INT zxMplsTERateLimitCfgRedAction | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.7 | INTEGER | read-create | The rate-limit red action. |
| ROW zxMplsTERateLimitCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.25.1.100 | RowStatus | read-create | row status. |
| zxMplsTEConvRatioCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.26 | not-accessible | A list of static TE tunnel convergence ratio entries. | |
| zxMplsTEConvRatioCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.26.1 | not-accessible | An entry containing static TE tunnel convergence ratio. | |
| STR zxMplsTEConvRatioCfgStTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.26.1.1 | DisplayString | not-accessible | Static Tunnel name. |
| INT zxMplsTEConvRatioCfgMode | 1.3.6.1.4.1.3902.3.6000.204.1.26.1.2 | INTEGER | read-create | The convergence ratio mode. |
| U32 zxMplsTEConvRatioCfgValue | 1.3.6.1.4.1.3902.3.6000.204.1.26.1.3 | Unsigned32 | read-create | The convergence ratio value. |
| ROW zxMplsTEConvRatioCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.26.1.100 | RowStatus | read-create | row status. |
| zxMplsTEEcmpGroupCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.27 | not-accessible | A list of TE-ECMP group entries. | |
| zxMplsTEEcmpGroupCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.27.1 | not-accessible | An entry containing TE-ECMP group. | |
| I32 zxMplsTEEcmpGroupCfgGroupId | 1.3.6.1.4.1.3902.3.6000.204.1.27.1.1 | Integer32 | not-accessible | configure TE-ECMP group. |
| INT zxMplsTEEcmpGroupCfgLoadShare | 1.3.6.1.4.1.3902.3.6000.204.1.27.1.2 | INTEGER | read-create | configure the load-sharing policy of this TE-ECMP group. |
| I32 zxMplsTEEcmpGroupCfgMinimum | 1.3.6.1.4.1.3902.3.6000.204.1.27.1.3 | Integer32 | read-create | configure the minimum-member of this TE-ECMP group. |
| I32 zxMplsTEEcmpGroupCfgDelay | 1.3.6.1.4.1.3902.3.6000.204.1.27.1.4 | Integer32 | read-create | configure the update-delay of this TE-ECMP group. |
| ROW zxMplsTEEcmpGroupCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.27.1.100 | RowStatus | read-create | row status. |
| zxMplsTEEcmpTunnelCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.28 | not-accessible | A list of TE-ECMP tunnel entries. | |
| zxMplsTEEcmpTunnelCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.28.1 | not-accessible | An entry containing TE-ECMP tunnel. | |
| I32 zxMplsTEEcmpTunnelCfgGroupId | 1.3.6.1.4.1.3902.3.6000.204.1.28.1.1 | Integer32 | not-accessible | configure TE-ECMP group. |
| U32 zxMplsTEEcmpTunnelCfgTunnelId | 1.3.6.1.4.1.3902.3.6000.204.1.28.1.2 | Unsigned32 | not-accessible | configure TE-ECMP tunnel. |
| ROW zxMplsTEEcmpTunnelCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.28.1.100 | RowStatus | read-create | row status. |
| zxMplsTETnnlAffntyCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.29 | not-accessible | A list of mpls traffic-eng tunnel affinity entries. | |
| zxMplsTETnnlAffntyCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.29.1 | not-accessible | An entry containing mpls traffic-eng tunnel affinities. The bit position or name can only be chosen to configure one of them. | |
| STR zxMplsTETnnlAffntyCfgTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.29.1.1 | DisplayString | not-accessible | The name of this tunnel. |
| INT zxMplsTETnnlAffntyCfgType | 1.3.6.1.4.1.3902.3.6000.204.1.29.1.2 | INTEGER | read-create | The affinity type of this tunnel. |
| INT zxMplsTETnnlAffntyCfgBitPos | 1.3.6.1.4.1.3902.3.6000.204.1.29.1.3 | INTEGER | not-accessible | The bit position value of this type affinity on the tunnel. |
| STR zxMplsTETnnlAffntyCfgBitName | 1.3.6.1.4.1.3902.3.6000.204.1.29.1.4 | DisplayString | not-accessible | The bit name of this type affinity on the tunnel. |
| ROW zxMplsTETnnlAffntyCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.29.1.100 | RowStatus | read-create | Row status. |
| zxMplsTEIfAffntyCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.30 | not-accessible | A list of mpls traffic-eng interface affinity entries. | |
| zxMplsTEIfAffntyCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.30.1 | not-accessible | An entry containing mpls traffic-eng interface affinities. The bit position or name can only be chosen to configure one of them. | |
| STR zxMplsTEIfAffntyCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.30.1.1 | DisplayString | not-accessible | The name of this interface. |
| INT zxMplsTEIfAffntyCfgBitPos | 1.3.6.1.4.1.3902.3.6000.204.1.30.1.2 | INTEGER | not-accessible | The bit position value of the affinity on this interface. |
| STR zxMplsTEIfAffntyCfgBitName | 1.3.6.1.4.1.3902.3.6000.204.1.30.1.3 | DisplayString | not-accessible | The bit name of the affinity on the interface. |
| ROW zxMplsTEIfAffntyCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.30.1.100 | RowStatus | read-create | Row status. |
| zxMplsTETrunkCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.31 | not-accessible | A list of TE-Trunk entries. | |
| zxMplsTETrunkCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.31.1 | not-accessible | An entry containing TE-Trunk. | |
| STR zxMplsTETrunkCfgIfName | 1.3.6.1.4.1.3902.3.6000.204.1.31.1.1 | DisplayString | not-accessible | The name of this interface. |
| ROW zxMplsTETrunkCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.31.1.100 | RowStatus | read-create | Row status. |
| zxMplsTETnnlPolicyClassCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.32 | not-accessible | A list of TE tunnel policy-class entries. | |
| zxMplsTETnnlPolicyClassCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.32.1 | not-accessible | An entry containing TE tunnel policy-class. | |
| STR zxMplsTETnnlPolicyClassTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.32.1.1 | DisplayString | not-accessible | The name of this tunnel. |
| I32 zxMplsTETnnlPolicyClassValue | 1.3.6.1.4.1.3902.3.6000.204.1.32.1.2 | Integer32 | not-accessible | The Policy-Class value on this tunnel. |
| ROW zxMplsTETnnlPolicyClassRowSta | 1.3.6.1.4.1.3902.3.6000.204.1.32.1.100 | RowStatus | read-create | row status. |
| zxMplsTeP2mpStaticTnnlCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.33 | not-accessible | A list of static P2MP tunnel entries. | |
| zxMplsTeP2mpStaticTnnlCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.33.1 | not-accessible | An entry containing static P2MP tunnel. | |
| STR zxMplsTeP2mpStaticTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.1 | DisplayString | not-accessible | static P2MP tunnel name. |
| U32 zxMplsTeP2mpStaticTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.2 | Unsigned32 | read-only | static P2MP tunnel id. |
| INT zxMplsTeP2mpStaticTnnlRole | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.3 | INTEGER | read-create | static P2MP tunnel role. |
| INT zxMplsTeP2mpStaticTnnlLeaf | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.4 | INTEGER | read-create | static P2MP tunnel leaf enable/disable. |
| INT zxMplsTeP2mpStaticTnnlEnable | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.5 | INTEGER | read-create | static P2MP tunnel enable/disable. |
| ROW zxMplsTeP2mpStaticTnnlRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.33.1.100 | RowStatus | read-create | row status. |
| zxMplsTeP2mpStaticLspCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.34 | not-accessible | A list of static P2MP tunnel LSP entries. | |
| zxMplsTeP2mpStaticLspCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.34.1 | not-accessible | An entry containing static P2MP tunnel LSP. | |
| STR zxMplsTeP2mpStaticLspTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.1 | DisplayString | not-accessible | static P2MP tunnel name. |
| U32 zxMplsTeP2mpStaticLspTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.2 | Unsigned32 | read-only | static P2MP tunnel id. |
| U32 zxMplsTeP2mpStaticLspId | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.3 | Unsigned32 | not-accessible | static P2MP tunnel name. |
| U32 zxMplsTeP2mpStaticLspCir | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.4 | Unsigned32 | read-create | The bandwidth of this LSP cir. |
| U32 zxMplsTeP2mpStaticLspCbs | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.5 | Unsigned32 | read-create | The bandwidth of this LSP cbs. |
| U32 zxMplsTeP2mpStaticLspEir | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.6 | Unsigned32 | read-create | The bandwidth of this LSP eir. |
| U32 zxMplsTeP2mpStaticLspEbs | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.7 | Unsigned32 | read-create | The bandwidth of this LSP ebs. |
| ROW zxMplsTeP2mpStaticLspRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.34.1.100 | RowStatus | read-create | row status. |
| zxMplsTeP2mpSLspInSegCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.35 | not-accessible | A list of static P2MP tunnel inseg entries. | |
| zxMplsTeP2mpSLspInSegCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.35.1 | not-accessible | An entry containing static P2MP tunnel inseg. | |
| STR zxMplsTeP2mpSLspInSegTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.1 | DisplayString | not-accessible | static P2MP tunnel name. |
| U32 zxMplsTeP2mpSLspInSegTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.2 | Unsigned32 | read-only | static P2MP tunnel id. |
| INT zxMplsTeP2mpSLspInSegLspID | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.3 | INTEGER | not-accessible | static P2MP tunnel lsp id. |
| STR zxMplsTeP2mpSLspInSegInPort | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.4 | DisplayString | read-create | static P2MP tunnel inseg port. |
| U32 zxMplsTeP2mpSLspInSegInLabel | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.5 | Unsigned32 | read-create | static P2MP tunnel inseg label. |
| ROW zxMplsTeP2mpSLspInSegRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.35.1.100 | RowStatus | read-create | row status. |
| zxMplsTeP2mpSLspOutSegCfgTable | 1.3.6.1.4.1.3902.3.6000.204.1.36 | not-accessible | A list of static P2MP tunnel outseg entries. | |
| zxMplsTeP2mpSLspOutSegCfgEntry | 1.3.6.1.4.1.3902.3.6000.204.1.36.1 | not-accessible | An entry containing static P2MP tunnel outseg. | |
| STR zxMplsTeP2mpSLspOutSegTnnlName | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.1 | DisplayString | not-accessible | static P2MP tunnel name. |
| U32 zxMplsTeP2mpSLspOutSegTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.2 | Unsigned32 | read-only | static P2MP tunnel id. |
| INT zxMplsTeP2mpSLspOutSegLspID | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.3 | INTEGER | not-accessible | static P2MP tunnel lsp id. |
| INT zxMplsTeP2mpSLspOutSegID | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.4 | INTEGER | not-accessible | static P2MP tunnel outseg id. |
| STR zxMplsTeP2mpSLspOutSegOutPort | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.5 | DisplayString | read-create | static P2MP tunnel outseg port. |
| U32 zxMplsTeP2mpSLspOutSegOutLabel | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.6 | Unsigned32 | read-create | static P2MP tunnel outseg label. |
| IP zxMplsTeP2mpSLspOutSegNexthop | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.7 | IpAddress | read-create | static P2MP tunnel outseg next_hop. |
| ROW zxMplsTeP2mpSLspOutSegRowStatus | 1.3.6.1.4.1.3902.3.6000.204.1.36.1.100 | RowStatus | read-create | row status. |
| zxMplsTEP2mpSTnnlStatusTable | 1.3.6.1.4.1.3902.3.6000.204.1.37 | not-accessible | A list of static P2MP tunnel status entries. | |
| zxMplsTEP2mpSTnnlStatusEntry | 1.3.6.1.4.1.3902.3.6000.204.1.37.1 | not-accessible | An entry containing static P2MP tunnel status. | |
| U32 zxMplsTEP2mpSTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.37.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of static P2MP tunnel instances between a pair of ingress and egress LSRs. |
| INT zxMplsTEP2mpSTnnlAdminStatus | 1.3.6.1.4.1.3902.3.6000.204.1.37.1.2 | INTEGER | read-only | This value identifies the administrator status of this static P2MP tunnel. |
| INT zxMplsTEP2mpSTnnlProtStatus | 1.3.6.1.4.1.3902.3.6000.204.1.37.1.3 | INTEGER | read-only | This value identifies actual operational status of this static P2MP tunnel. |
| zxMplsTELocalTunnelUtilizeTable | 1.3.6.1.4.1.3902.3.6000.204.1.55 | not-accessible | ||
| zxMplsTELocalTunnelUtilizeEntry | 1.3.6.1.4.1.3902.3.6000.204.1.55.1 | not-accessible | ||
| U32 zxMplsTELocalTunnelUtilizeTnnlID | 1.3.6.1.4.1.3902.3.6000.204.1.55.1.1 | Unsigned32 | not-accessible | Uniquely identifies a set of local tunnel instances between a pair of ingress and egress LSRs. |
| U32 zxMplsTELocalTunnelUtilize | 1.3.6.1.4.1.3902.3.6000.204.1.55.1.2 | Unsigned32 | read-only | The bw utilize of local tunnel.It's default value is 4294967295. |
| U32 zxMplsTELocalTunnelUtilizeIn | 1.3.6.1.4.1.3902.3.6000.204.1.55.1.3 | Unsigned32 | read-only | The bw in utilize of local tunnel.It's default value is 4294967295. |
RFC description
ZTE vendor-private MIB for MPLS Traffic Engineering management including tunnel affinity configuration, static LSP management, and P2MP LSP support.
Start monitoring ZTE ZXROSNG-based router (MPLS-TE RSVP-signaling/graceful-restart config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.