ZXR10-SAMGR-MIB

All MIBs › ZXR10-SAMGR-MIB

Organization: ZTE Corporation

Last Updated: 2015-07-21

Category: ZTE ZXR10 WAN and Legacy Protocols

Description: Defines ZTE ZXR10 Service Activation Manager configuration for provisioning network service parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-SAMGR-MIB?

ZXR10-SAMGR-MIB is a ZTE enterprise MIB for the ZXR10 routing/switching platform, defining the base SMI structure and object identifiers used by the ZXR10 Service Activation Manager, a component that provisions network service parameters. Given the minimal module description and generic top-level sample objects ("zte", "zxr10"), this module appears to be primarily a naming/registration point (an SMI root definition) rather than a rich set of runtime data objects. Its practical use, where populated, is configuration-oriented: tracking service-activation parameters and provisioning state rather than hardware health counters. There is no explicit dependency on other MIBs beyond the vendor's own SMI conventions rooted under the ZTE enterprise OID. It is deployed on ZTE ZXR10 series routers and switches used by carriers and enterprises for service provisioning, and the ZXR10-SAMGR-MIB MIB serves as the namespace root under which the Service Activation Manager's runtime objects are defined.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SAMGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series router/switch

Monitoring Examples

The only sample objects available ("zte", "zxr10") are enterprise/OID registration nodes rather than runtime data objects, so a concrete monitoring scenario cannot be honestly constructed from what is grounded here; this module appears to function mainly as a namespace/identity anchor for ZXR10 service-activation objects defined elsewhere.

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
INT zxr10samgrBindActiveIsTrackObjectOrGroup	1.3.6.1.4.1.3902.3.130.3.1.3	INTEGER	read-only	Track type.
STR zxr10samgrBindActiveName	1.3.6.1.4.1.3902.3.130.3.1.2	DisplayString	read-only	Track object or track-group which transfer state change.
zxr10samgrBindEntry	1.3.6.1.4.1.3902.3.130.3.1		not-accessible	Samgr bind information entry.
STR zxr10samgrBindPassiveName	1.3.6.1.4.1.3902.3.130.3.1.1	DisplayString	read-only	Track object which accept state change.
zxr10samgrBindTable	1.3.6.1.4.1.3902.3.130.3		not-accessible	Samgr bind information table.
zxr10samgrGroupMemberEntry	1.3.6.1.4.1.3902.3.130.4.1		not-accessible	Samgr track-group member information entry.
STR zxr10samgrGroupMemberGroupName	1.3.6.1.4.1.3902.3.130.4.1.1	DisplayString	read-only	The track group name.
INT zxr10samgrGroupMemberStatus	1.3.6.1.4.1.3902.3.130.4.1.3	INTEGER	read-only	Track state.
zxr10samgrGroupMemberTable	1.3.6.1.4.1.3902.3.130.4		not-accessible	Samgr track-group member information table.
STR zxr10samgrGroupMemberTrackName	1.3.6.1.4.1.3902.3.130.4.1.2	DisplayString	read-only	The track name attach to this group.
zxr10samgrMIB	1.3.6.1.4.1.3902.3.130			ZXROS SMI MIB
zxr10samgrTrackGroupEntry	1.3.6.1.4.1.3902.3.130.1.1		not-accessible	Samgr track group config information entry.
INT zxr10samgrTrackGroupIfHasUsedByApp	1.3.6.1.4.1.3902.3.130.1.1.4	INTEGER	read-only	When this value is 1,this track-group has been used.
I32 zxr10samgrTrackGroupMemberNumber	1.3.6.1.4.1.3902.3.130.1.1.3	Integer32	read-only	The total track object number in track-group.
STR zxr10samgrTrackGroupName	1.3.6.1.4.1.3902.3.130.1.1.1	DisplayString	read-only	Samgr track-group name.
I32 zxr10samgrTrackGroupPolicy	1.3.6.1.4.1.3902.3.130.1.1.2	Integer32	read-only	Track group policy.
INT zxr10samgrTrackGroupPolicyIfDefault	1.3.6.1.4.1.3902.3.130.1.1.6	INTEGER	read-only	The flag that show group policy default.
INT zxr10samgrTrackGroupStatus	1.3.6.1.4.1.3902.3.130.1.1.5	INTEGER	read-only	Track-group state.
zxr10samgrTrackGroupTable	1.3.6.1.4.1.3902.3.130.1		not-accessible	Samgr track group config information table.
I32 zxr10samgrTrackGroupUpDelayTime	1.3.6.1.4.1.3902.3.130.1.1.7	Integer32	read-only	Track-group delay up time.
I32 zxr10samgrTrackObjectBfdMultiplier	1.3.6.1.4.1.3902.3.130.2.1.26	Integer32	read-only	BFD detect multiplier.
I32 zxr10samgrTrackObjectBfdPktMinRxInterval	1.3.6.1.4.1.3902.3.130.2.1.25	Integer32	read-only	BFD packets min rx in milliseconds.
I32 zxr10samgrTrackObjectBfdPktMinTxInterval	1.3.6.1.4.1.3902.3.130.2.1.24	Integer32	read-only	BFD packets tx interval in milliseconds.
STR zxr10samgrTrackObjectBfdSessionName	1.3.6.1.4.1.3902.3.130.2.1.38	DisplayString	read-only	BFD session name.
STR zxr10samgrTrackObjectBfdVrfName	1.3.6.1.4.1.3902.3.130.2.1.17	DisplayString	read-only	vrf name.
I32 zxr10samgrTrackObjectCfmLocalMep	1.3.6.1.4.1.3902.3.130.2.1.5	Integer32	read-only	Local MEP ID of CFM.
I32 zxr10samgrTrackObjectCfmMa	1.3.6.1.4.1.3902.3.130.2.1.4	Integer32	read-only	MA of CFM.
I32 zxr10samgrTrackObjectCfmMd	1.3.6.1.4.1.3902.3.130.2.1.3	Integer32	read-only	MD of CFM.
I32 zxr10samgrTrackObjectCfmRemoteMep	1.3.6.1.4.1.3902.3.130.2.1.6	Integer32	read-only	Remote MEP ID of CFM.
INT zxr10samgrTrackObjectDetectType	1.3.6.1.4.1.3902.3.130.2.1.2	INTEGER	read-only	Detect type.
STR zxr10samgrTrackObjectEfmInterfaceName	1.3.6.1.4.1.3902.3.130.2.1.7	DisplayString	read-only	Interface name of EFM.
zxr10samgrTrackObjectEntry	1.3.6.1.4.1.3902.3.130.2.1		not-accessible	Track object config information entry.
INT zxr10samgrTrackObjectIfHasUsedByApp	1.3.6.1.4.1.3902.3.130.2.1.32	INTEGER	read-only	When this value is 1, this track has been used.
INT zxr10samgrTrackObjectIfStateType	1.3.6.1.4.1.3902.3.130.2.1.43	INTEGER	read-only	Interface protocol status type.
STR zxr10samgrTrackObjectInterfaceName	1.3.6.1.4.1.3902.3.130.2.1.41	DisplayString	read-only	Interface name.
STR zxr10samgrTrackObjectL2BfdSessionName	1.3.6.1.4.1.3902.3.130.2.1.37	DisplayString	read-only	L2 BFD session name.
STR zxr10samgrTrackObjectLastStateChgTime	1.3.6.1.4.1.3902.3.130.2.1.36	DisplayString	read-only	Track object state last change time.
IP zxr10samgrTrackObjectLdpBfdFecIPv4Address	1.3.6.1.4.1.3902.3.130.2.1.18	IpAddress	read-only	Ldp BFD FEC IPv4 address.
I32 zxr10samgrTrackObjectLdpBfdMaskLength	1.3.6.1.4.1.3902.3.130.2.1.19	Integer32	read-only	Ldp BFD prefix length.
IP zxr10samgrTrackObjectLinkBfdLocalIPv4Address	1.3.6.1.4.1.3902.3.130.2.1.12	IpAddress	read-only	Link BFD local IPv4 address.
STR zxr10samgrTrackObjectLinkBfdOutInterfaceName	1.3.6.1.4.1.3902.3.130.2.1.14	DisplayString	read-only	Link BFD out-interface name.
IP zxr10samgrTrackObjectLinkBfdRemoteIPv4Address	1.3.6.1.4.1.3902.3.130.2.1.13	IpAddress	read-only	Link BFD remote IPv4 address.
IP zxr10samgrTrackObjectMplsOamEgressID	1.3.6.1.4.1.3902.3.130.2.1.11	IpAddress	read-only	Mpls-oam egress ID.
IP zxr10samgrTrackObjectMplsOamIngressID	1.3.6.1.4.1.3902.3.130.2.1.10	IpAddress	read-only	Mpls-oam ingress ID.
I32 zxr10samgrTrackObjectMplsOamTunnelID	1.3.6.1.4.1.3902.3.130.2.1.9	Integer32	read-only	Mpls-oam tunnel ID. The range of this parameter depend on the device.
STR zxr10samgrTrackObjectName	1.3.6.1.4.1.3902.3.130.2.1.1	DisplayString	read-only	Track name.
IP zxr10samgrTrackObjectPeerBfdLocalIPv4Address	1.3.6.1.4.1.3902.3.130.2.1.15	IpAddress	read-only	Peer BFD local IPv4 address.
IP zxr10samgrTrackObjectPeerBfdRemoteIPv4Address	1.3.6.1.4.1.3902.3.130.2.1.16	IpAddress	read-only	Peer BFD remote IPv4 address.
I32 zxr10samgrTrackObjectPingDetectGroupNO	1.3.6.1.4.1.3902.3.130.2.1.8	Integer32	read-only	Ping-detect group ID. The range of this parameter depend on the device.
IP zxr10samgrTrackObjectPwBfdPeerID	1.3.6.1.4.1.3902.3.130.2.1.22	IpAddress	read-only	PW BFD peer ID.
INT zxr10samgrTrackObjectPwBfdPwType	1.3.6.1.4.1.3902.3.130.2.1.23	INTEGER	read-only	PW type.
U32 zxr10samgrTrackObjectPwBfdVcID	1.3.6.1.4.1.3902.3.130.2.1.21	Unsigned32	read-only	PW BFD vc ID.
STR zxr10samgrTrackObjectPwName	1.3.6.1.4.1.3902.3.130.2.1.39	DisplayString	read-only	PW name.
IP zxr10samgrTrackObjectPwPeerID	1.3.6.1.4.1.3902.3.130.2.1.28	IpAddress	read-only	PW peer ID.
INT zxr10samgrTrackObjectPwType	1.3.6.1.4.1.3902.3.130.2.1.29	INTEGER	read-only	PW type.
U32 zxr10samgrTrackObjectPwVcID	1.3.6.1.4.1.3902.3.130.2.1.27	Unsigned32	read-only	PW vc ID.
I32 zxr10samgrTrackObjectRsvpBfdTunnelID	1.3.6.1.4.1.3902.3.130.2.1.20	Integer32	read-only	RSVP BFD tunnel ID.
I32 zxr10samgrTrackObjectSqaInstanceID	1.3.6.1.4.1.3902.3.130.2.1.34	Integer32	read-only	SQA instance ID.
U32 zxr10samgrTrackObjectStateChgNum	1.3.6.1.4.1.3902.3.130.2.1.35	Unsigned32	read-only	Track object state change number.
INT zxr10samgrTrackObjectStatus	1.3.6.1.4.1.3902.3.130.2.1.33	INTEGER	read-only	Track state.
zxr10samgrTrackObjectTable	1.3.6.1.4.1.3902.3.130.2		not-accessible	Track object config information table.
U32 zxr10samgrTrackObjectTpOamMeg	1.3.6.1.4.1.3902.3.130.2.1.40	Unsigned32	read-only	TP-oam meg.
INT zxr10samgrTrackObjectTransStatus	1.3.6.1.4.1.3902.3.130.2.1.42	INTEGER	read-only	Track trans state.
I32 zxr10samgrTrackObjectVrrpGroupID	1.3.6.1.4.1.3902.3.130.2.1.31	Integer32	read-only	VRRP group ID.
STR zxr10samgrTrackObjectVrrpInterfaceName	1.3.6.1.4.1.3902.3.130.2.1.30	DisplayString	read-only	VRRP interface name.

RFC description

Manages Selective Address Management Group (SAMGR) tracking and failover operations for ZTE ZXR10 routing platforms.

Start monitoring ZTE ZXR10 series router/switch (Service Activation Manager provisioning-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-SAMGR-MIB

What Is ZXR10-SAMGR-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description