ZTE-AN-MDI-MIB

All MIBs › ZTE-AN-MDI-MIB

Organization: ZTE Corporation

Last Updated: 2016-10-08

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node MDI (Medium Dependent Interface) configuration for copper interface tuning.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-MDI-MIB?

ZTE-AN-MDI-MIB manages Medium Dependent Interface (MDI) configuration on ZTE access node copper Ethernet ports, controlling settings such as MDI/MDI-X crossover mode used to correctly pair transmit/receive pairs on twisted-pair copper links. It exposes interface-level configuration data for copper port wiring mode rather than broad performance counters. From a monitoring perspective it helps confirm that a copper port's MDI mode is set correctly (e.g. auto, MDI, or MDI-X), which is a common root cause of a copper link that won't establish or negotiates at reduced speed/duplex. It is a narrowly-scoped, vendor-specific configuration MIB with no apparent dependency on external standard MIBs beyond general Ethernet PHY conventions. It is deployed on ZTE access nodes with copper (RJ-45) Ethernet uplink or subscriber-facing ports needing MDI crossover tuning, where ZTE-AN-MDI-MIB SNMP monitoring helps pinpoint a link failing to establish due to a crossover mismatch.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-MDI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access node equipment (copper Ethernet ports)

Monitoring Examples

No object names were supplied for this MIB; based on module_desc, a realistic scenario is an admin polling the MDI mode setting for a copper port after a link fails to come up, discovering it's fixed to the wrong crossover mode (MDI instead of MDI-X or vice versa) for the connected cable/device, and correcting it via this MIB.

What Can Be Monitored

MDI/MDI-X crossover mode configuration
copper port wiring mode status

Imported Objects

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus

From ZTE-AN-SMI

zxAnVideo

OBJECT-IDENTITY

From ZTE-AN-TC-MIB

VlanId
ZxAnSubIfIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnMdiMib	1.3.6.1.4.1.3902.1082.150.1			The MIB module for the management of MDI.
zxAnMdiGlobalObjects	1.3.6.1.4.1.3902.1082.150.1.1
BIT zxAnMdiCapabilities	1.3.6.1.4.1.3902.1082.150.1.1.1	Bits	read-only	The management capabilities of MDI (Media Delivery Index). The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnMdiMonitorVideoPrfTable, and zxAnMdiMonitorVideoPrf in zxAnMdiMonitorConfTable. bit 1: value 1 means the syntax of zxAnMdiMonitorStartTime is DateAndTime, otherwise the syntax is TimeTicks. bit 2: value 1 means supporting zxAnMdiMonitorSrcIpAddressType, zxAnMdiMonitorSrcIpAddress and zxAnMdiMonitorDirection in zxAnMdiMonitorConfTable. bit 3: value 1 means supporting zxAnMdiMonitorDestUdpPort in zxAnMdiMonitorConfTable. bit 4: value 1 means supporting zxAnMdiMonitorGemPort in zxAnMdiMonitorConfTable. NOTE: No recommended to display it in NMS.
INT zxAnMdiDiagLogEnable	1.3.6.1.4.1.3902.1082.150.1.1.10	INTEGER	read-create	Enable or disable MDI diaglog function.
INT zxAnMdiDiagLogFtmEnable	1.3.6.1.4.1.3902.1082.150.1.1.11	INTEGER	read-create	Enable or disable MDI ftm diaglog function.
INT zxAnMdiDiagLogFileType	1.3.6.1.4.1.3902.1082.150.1.1.12	INTEGER	read-create	MDI diaglog file type.
I32 zxAnMdiClearStatistics	1.3.6.1.4.1.3902.1082.150.1.1.13	Integer32	read-create	Clear MDI Statistics session.
zxAnMdiObjects	1.3.6.1.4.1.3902.1082.150.1.2
zxAnMdiMonitorObjects	1.3.6.1.4.1.3902.1082.150.1.2.2
zxAnMdiMonitorConfTable	1.3.6.1.4.1.3902.1082.150.1.2.2.2		not-accessible	Media delivery index monitoring table.
zxAnMdiMonitorConfEntry	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1		not-accessible	Media delivery index monitoring entry.
I32 zxAnMdiMonitorSessionId	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.1	Integer32	not-accessible	The session ID of MDI monitoring.
NUM zxAnMdiMonitorIfIndex	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.2	InterfaceIndex	read-create	The index of NNI/UNI port.
ZXA zxAnMdiMonitorSubIfIndex	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.3	ZxAnSubIfIndex	read-create	The sub-interface of NNI/UNI port.
VLA zxAnMdiMonitorVlan	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.4	VlanId	read-create	The VLAN of the monitoring packets.
IPt zxAnMdiMonitorDestIpAddressType	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.5	InetAddressType	read-create	The destination IP address type of the monitoring packets.
IP zxAnMdiMonitorDestIpAddress	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.6	InetAddress	read-create	The destination IP address of the monitoring packets.
I32 zxAnMdiMonitorBitRate	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.7	Integer32	read-create	The bit rate of MDI monitoring. Value 0 means VBR (Variable Bit Rate), otherwise CBR (Constants Bit Rate).
I32 zxAnMdiMonitorCalculatePeriod	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.8	Integer32	read-create	The calculation period of MDI monitoring. A primary record of MDI monitoring will be created when arriving the end of the period.
I32 zxAnMdiMonitorStatisticPeriod	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.9	Integer32	read-create	The statistic period of MDI monitoring. A statistic record of MDI monitoring will be created when arriving the end of the period, based on the primary records that created in the period.
I32 zxAnMdiMonitorDuration	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.10	Integer32	read-create	The duration of MDI monitoring.
INT zxAnMdiMonitorStatus	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.11	INTEGER	read-only	The status of MDI monitoring. The status will be 'monitoring' when the monitoring session is created, and 'stopped' when arriving the end of monitoring duration.
DAT zxAnMdiMonitorStartTime	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.12	DateAndTime	read-only	The starting time of MDI monitoring.
STR zxAnMdiMonitorVideoPrf	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.13	DisplayString	read-create	The video profile of MDI monitoring.
IPt zxAnMdiMonitorSrcIpAddressType	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.14	InetAddressType	read-create	The source IP address type of the monitoring packets.
IP zxAnMdiMonitorSrcIpAddress	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.15	InetAddress	read-create	The source IP address of the monitoring packets.
INT zxAnMdiMonitorDirection	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.16	INTEGER	read-create	The direction of MDI monitoring.
I32 zxAnMdiMonitorDestUdpPort	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.17	Integer32	read-create	The destination UDP port of MDI monitoring. Value 0 means not configured.
IP zxAnMdiMonitorCliIpAddress	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.21	IpAddress	read-create	The CLI IP address of the monitoring packets.
IP zxAnMdiMonitorCliSourceIpAddress	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.22	IpAddress	read-create	The CLI source IP address of the monitoring packets.
I32 zxAnMdiMonitorGemPort	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.45	Integer32	read-create	The GEM port of MDI monitoring. Value 0 means not configured.
ROW zxAnMdiMonitorRowStatus	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMdiMonitorConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
STR zxAnMdiMonitorIfName	1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.66	DisplayString	read-create	The video profile of MDI monitoring.
zxAnMdiMonitorStatsTable	1.3.6.1.4.1.3902.1082.150.1.2.2.3		not-accessible	MDI monitoring statistic table.
zxAnMdiMonitorStatsEntry	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1		not-accessible	MDI monitoring statistic entry.
I32 zxAnMdiMonitorStatsSequenceId	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.1	Integer32	not-accessible	The sequence ID of MDI monitoring statistic record.
I32 zxAnMdiMonitorStatsMaxDf	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.2	Integer32	read-only	The maximum delay factor of the records in the statistic period.
I32 zxAnMdiMonitorStatsMinDf	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.3	Integer32	read-only	The minimum delay factor of the records in the statistic period.
I32 zxAnMdiMonitorStatsAvgDf	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.4	Integer32	read-only	The average delay factor of the records in the statistic period.
I32 zxAnMdiMonitorStatsMaxMlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.5	Integer32	read-only	The maximum media loss rate of the records in the statistic period.
I32 zxAnMdiMonitorStatsMinMlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.6	Integer32	read-only	The minimum media loss rate of the records in the statistic period.
I32 zxAnMdiMonitorStatsAvgMlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.7	Integer32	read-only	The average media loss rate of the records in the statistic period.
I32 zxAnMdiMonitorStatsMltLast15M	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.8	Integer32	read-only	The total number of media packets lost in last 15 minutes.
I32 zxAnMdiMonitorStatsMltLast24H	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.9	Integer32	read-only	The total number of media packets lost in last 24 hours.
I32 zxAnMdiMonitorStatsMaxVideoMos	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.10	Integer32	read-only	The maximum video mean opinion score of the records in the statistic period. This data format supports a range from 0 to 5.0 with granularity of 0.1.
I32 zxAnMdiMonitorStatsMinVideoMos	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.11	Integer32	read-only	The minimum video mean opinion score of the records in the statistic period. This data format supports a range from 0 to 5.0 with granularity of 0.1.
I32 zxAnMdiMonitorStatsAvgVideoMos	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.12	Integer32	read-only	The average video mean opinion score of the records in the statistic period. This data format supports a range from 0 to 5.0 with granularity of 0.1.
I32 zxAnMdiMonitorStatsMaxPlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.13	Integer32	read-only	The maximum PLR (Packet Loss Rate) of the records in the statistic period.
I32 zxAnMdiMonitorStatsMinPlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.14	Integer32	read-only	The minimum PLR (Packet Loss Rate) of the records in the statistic period.
I32 zxAnMdiMonitorStatsAvgPlr	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.15	Integer32	read-only	The average PLR (Packet Loss Rate) of the records in the statistic period.
I32 zxAnMdiMonitorStatsStartPktSeqId	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.16	Integer32	read-only	The sequence ID of the starting packet in the statistic period.
I32 zxAnMdiMonitorStatsEndPktSeqId	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.17	Integer32	read-only	The sequence ID of the ending packet in the statistic period.
I32 zxAnMdiMonitorStatsLossPkts	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.18	Integer32	read-only	The total number of lost media packets in the statistic period.
I32 zxAnMdiMonitorStatsErrorPkts	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.19	Integer32	read-only	The total number of errored media packets in the statistic period.
I32 zxAnMdiMonitorStatsDuplicatePkts	1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.20	Integer32	read-only	The total number of duplicated media packets in the statistic period.
zxAnMdiMonitorVideoPrfTable	1.3.6.1.4.1.3902.1082.150.1.2.2.4		not-accessible	MDI monitoring video profile table.
zxAnMdiMonitorVideoPrfEntry	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1		not-accessible	MDI monitoring video profile entry.
STR zxAnMdiMonVideoPrfName	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.1	DisplayString	not-accessible	The video profile name.
INT zxAnMdiMonVideoCodec	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.2	INTEGER	read-create	The video codec.
INT zxAnMdiMonVideoResolution	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.3	INTEGER	read-create	The video resolution.
I32 zxAnMdiMonVideoFrameRate	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.4	Integer32	read-create	The video frame rate.
INT zxAnMdiMonVideoPlc	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.5	INTEGER	read-create	The video PLC (Packet Loss Concealment).
I32 zxAnMdiMonVideoRtpPayloadType	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.6	Integer32	read-create	The payload type of RTP (Real-time Transport Protocol) packet.
I32 zxAnMdiMonVideoBufferDuration	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.7	Integer32	read-create	The buffering duration.
ROW zxAnMdiMonVideoPrfRowStatus	1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMdiMonitorVideoPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).

RFC description

Media Delivery Index (MDI) monitoring and video profile management for ZTE video systems.

Start monitoring ZTE access node equipment, copper Ethernet ports (MDI/MDI-X crossover-mode config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-MDI-MIB

What Is ZTE-AN-MDI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description