ZXR10-ETH-MGT-MIB

All MIBs › ZXR10-ETH-MGT-MIB

Organization: ZTE Corporation

Last Updated: 2005-04-12

Category: ZTE ZXR10 Routing and Switching

Description: Manages ZTE ZXR10 router Ethernet interface management including speed, duplex, and flow control settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-ETH-MGT-MIB?

ZXR10-ETH-MGT-MIB is a ZTE Corporation proprietary MIB (ZXROS v4.6.03) configuring Ethernet sub-interfaces and physical-port parameters on ZXR10 routers. Its sub-interface query table, keyed by index, records parent ifIndex/name; a sub-interface config table records parent/sub ifIndex/name, VLAN ID, encapsulation type, and row status; and a physical-interface table records frame type, negotiation, work type, speed, and MTU, alongside a receive-statistics table. As a configuration/performance MIB it lets an administrator confirm VLAN sub-interface encapsulation and physical-port speed/MTU on a ZTE ZXR10 router. It is deployed on ZTE Corporation ZXR10 router platforms. Engineers can download the ZXR10-ETH-MGT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-ETH-MGT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Corporation ZXR10 router platforms

Monitoring Examples

An administrator checks zxr10EthSubIfConfigVlanID and zxr10EthPhyIfSpeed to confirm sub-interface VLAN tagging and physical port speed on a ZTE ZXR10 router.

What Can Be Monitored

Ethernet sub-interface and physical-port configuration

Imported Objects

From RFC1155-SMI

IpAddress

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

From ZXR10-SMI

zxr10interfaces

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10EthMgtMIB	1.3.6.1.4.1.3902.3.103.2			ZXROS v4.6.03 ethnet query and configuration MIB
zxr10EthMgtMIBObjects	1.3.6.1.4.1.3902.3.103.2.1
zxr10EthQuery	1.3.6.1.4.1.3902.3.103.2.1.1
zxr10EthSubIfQueryTable	1.3.6.1.4.1.3902.3.103.2.1.1.1		not-accessible	Ethnet sub interface query table
zxr10EthSubIfQueryEntry	1.3.6.1.4.1.3902.3.103.2.1.1.1.1		not-accessible
NUM zxr10EthSubIfIndex	1.3.6.1.4.1.3902.3.103.2.1.1.1.1.1	InterfaceIndex	read-only	Sub interface ifIndex
NUM zxr10EthSubIfParentIfIndex	1.3.6.1.4.1.3902.3.103.2.1.1.1.1.2	InterfaceIndex	read-only	Sub interface's parent interface ifIndex
STR zxr10EthSubIfName	1.3.6.1.4.1.3902.3.103.2.1.1.1.1.3	DisplayString	read-only	Sub interface's name
STR zxr10EthSubIfParentIfName	1.3.6.1.4.1.3902.3.103.2.1.1.1.1.4	DisplayString	read-only	Parent interface's name
zxr10EthConfiguration	1.3.6.1.4.1.3902.3.103.2.1.2
zxr10EthSubIfConfigTable	1.3.6.1.4.1.3902.3.103.2.1.2.1		not-accessible	Sub interface cnfigration table
zxr10EthSubIfConfigEntry	1.3.6.1.4.1.3902.3.103.2.1.2.1.1		not-accessible
I32 zxr10EthSubIfConfigParentIfIndex	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.1	Integer32	read-only	Parent interface ifIndex
STR zxr10EthSubIfConfigParentIfName	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.2	DisplayString	read-only	Parent interface name
I32 zxr10EthSubIfConfigSubIfIndex	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.3	Integer32	read-only	Sub interface ifIndex
STR zxr10EthSubIfConfigSubIfName	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.4	DisplayString	read-only	Sub interface name
I32 zxr10EthSubIfConfigVlanID	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.5	Integer32	read-write	Vlan ID of this sub interface
ETH zxr10EthSubIfConfigEncapType	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.6	EthEncapsulationType	read-write	Ethnet encapsulation type such as 802.1Q
ROW zxr10EthSubIfConfigRowStatus	1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7	RowStatus	read-write	This object is used to manage creation and deletion of rows in this table. zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The value in any column may be modified any time even the value of this entry rowStatus object is 'active'. Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
zxr10EthPhyIfTable	1.3.6.1.4.1.3902.3.103.2.1.2.3		not-accessible	Ethnet configuration table
zxr10EthPhyIfEntry	1.3.6.1.4.1.3902.3.103.2.1.2.3.1		not-accessible
I32 zxr10EthPhyIfIndex	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.1	Integer32	read-only	Physical Ethnet interface ifIndex
ETH zxr10EthPhyIfFrameType	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.2	EthPhyFrameType	read-write
ETH zxr10EthPhyIfNegotiation	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.3	EthNegotiationType	read-write
ETH zxr10EthPhyWorkType	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.4	EthPhyWorkType	read-write
IFS zxr10EthPhyIfSpeed	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.5	IfSpeedType	read-write
I32 zxr10EthPhyIfMTU	1.3.6.1.4.1.3902.3.103.2.1.2.3.1.6	Integer32	read-write	Ethnet encapsulation type such as 802.1Q
zxr10EthLoopBackTable	1.3.6.1.4.1.3902.3.103.2.1.2.4		not-accessible	Ethnet loopback interface table
zxr10EthLoopBackEntry	1.3.6.1.4.1.3902.3.103.2.1.2.4.1		not-accessible
NUM zxr10EthLoopBackIfIndex	1.3.6.1.4.1.3902.3.103.2.1.2.4.1.1	InterfaceIndex	read-only
STR zxr10EthLoopBackIfName	1.3.6.1.4.1.3902.3.103.2.1.2.4.1.2	DisplayString	read-only
INT zxr10EthLoopBackNo	1.3.6.1.4.1.3902.3.103.2.1.2.4.1.3	INTEGER	read-only
ROW zxr10EthLoopBackRowStatus	1.3.6.1.4.1.3902.3.103.2.1.2.4.1.4	RowStatus	read-write
zxr10EthStats	1.3.6.1.4.1.3902.3.103.2.1.3
zxr10EthRecvStatsTable	1.3.6.1.4.1.3902.3.103.2.1.3.1		not-accessible	Ethnet configuration table
zxr10EthRecvStatsEntry	1.3.6.1.4.1.3902.3.103.2.1.3.1.1		not-accessible
I32 zxr10EthRecvStatsIfIndex	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.1	Integer32	read-only	Physical Ethnet interface ifIndex
C64 zxr10EthRecvPktsUnder64Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.2	Counter64	read-only
C64 zxr10EthRecvPkts64Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.3	Counter64	read-only
C64 zxr10EthRecvPkts65to127Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.4	Counter64	read-only
C64 zxr10EthRecvPkts128to255Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.5	Counter64	read-only
C64 zxr10EthRecvPkts255to511Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.6	Counter64	read-only
C64 zxr10EthRecvPkts512to1023Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.7	Counter64	read-only
C64 zxr10EthRecvPkts1024to1518Octects	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.8	Counter64	read-only
C64 zxr10EthRecvPktsOverSize	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.9	Counter64	read-only
C64 zxr10EthRecvPktsCRCError	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.10	Counter64	read-only
INT zxr10EthRecvClearCounts	1.3.6.1.4.1.3902.3.103.2.1.3.1.1.11	INTEGER	read-write	If set value to 1 ,clear interface counters
zxr10EthSndStatsTable	1.3.6.1.4.1.3902.3.103.2.1.3.2		not-accessible	Ethnet configuration table
zxr10EthSndStatsEntry	1.3.6.1.4.1.3902.3.103.2.1.3.2.1		not-accessible
I32 zxr10EthSndStatsIfIndex	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.1	Integer32	read-only	Physical Ethnet interface ifIndex
C64 zxr10EthSndPktsUnder64Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.2	Counter64	read-only
C64 zxr10EthSndPkts64Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.3	Counter64	read-only
C64 zxr10EthSndPkts65to127Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.4	Counter64	read-only
C64 zxr10EthSndPkts128to255Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.5	Counter64	read-only
C64 zxr10EthSndPkts255to511Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.6	Counter64	read-only
C64 zxr10EthSndPkts512to1023Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.7	Counter64	read-only
C64 zxr10EthSndPkts1024to1518Octects	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.8	Counter64	read-only
C64 zxr10EthSndPktsOverSize	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.9	Counter64	read-only
INT zxr10EthSndClearCounts	1.3.6.1.4.1.3902.3.103.2.1.3.2.1.10	INTEGER	read-write	If set value to 1,clear interface counters

RFC description

Provides Ethernet interface query, configuration, and statistics management for ZTE ZXR10 routers.

Start monitoring ZTE Corporation ZXR10 router platforms (sub-interface VLAN encapsulation/physical-port speed-MTU config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-ETH-MGT-MIB

What Is ZXR10-ETH-MGT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description