400 modules in VPN and Security
| Module | Description |
|---|---|
| A3COM-FILTER-R5-MIB | Defines packet filter rules and access-control statistics for 3Com network equipment. |
| A3COM-HUAWEI-8021PAE-MIB | Monitors IEEE 802.1X Port Access Entity (PAE) authentication sessions and port-level statistics on H3C devices. |
| A3COM-HUAWEI-ACL-MIB | Manages Access Control List (ACL) rules, groups, and match statistics on H3C network devices. |
| A3COM-HUAWEI-DHCPSNOOP-MIB | Monitors DHCP snooping binding entries, trusted ports, and attack-prevention counters on H3C switches. |
| A3COM-HUAWEI-DOT11-SA-MIB | Monitors 802.11 security associations, cipher suites, and key negotiation status on H3C wireless devices. |
| A3COM-HUAWEI-DOT11-WIDS-MIB | Monitors the H3C 802.11 Wireless Intrusion Detection System, tracking rogue APs and attack event counters. |
| A3COM-HUAWEI-DVPN-MIB | Manages H3C Dynamic VPN tunnel negotiation, session state, and traffic statistics for DVPN deployments. |
| A3COM-HUAWEI-FIREWALL-MIB | Monitors H3C firewall session tables, policy hit counters, and zone-based security statistics. |
| A3COM-HUAWEI-GRE-MIB | Handles configuration, keepalive status, and encapsulation statistics for GRE tunnel interfaces on H3C equipment. |
| A3COM-HUAWEI-IDS-MIB | Monitors the H3C Intrusion Detection System engine status, signature rules, and detected-attack counters. |
| A3COM-HUAWEI-IKE-MONITOR-MIB | Monitors IKE phase-1 and phase-2 negotiation states, SA lifetimes, and failure counts on H3C VPN gateways. |
| A3COM-HUAWEI-IPSEC-MONITOR-MIB | Tracks IPsec security associations along with tunnel statistics and encryption/authentication parameters on H3C equipment. |
| A3COM-HUAWEI-LI-MIB | Manages lawful intercept mediation configuration and intercept session state on H3C network devices. |
| A3COM-HUAWEI-MPLS-BGP-VPN-MIB | Manages MPLS/BGP Layer 3 VPN instances on H3C/3Com routers, including VRF configuration, route targets, and associated interface bindings. |
| A3COM-HUAWEI-NDEC-MIB | Manages network data encryption on H3C/3Com devices, providing configuration and status for encrypted communication sessions and encryption policy application. |
| A3COM-HUAWEI-PORT-SECURITY-MIB | Manages port security features on H3C/3Com switches, including secure MAC address configuration, violation mode settings, and intrusion notifications. |
| A3COM-HUAWEI-PORTAL-MIB | Manages web-based portal authentication on H3C/3Com devices, providing configuration and status for captive portal server connections and authenticated user sessions. |
| A3COM-HUAWEI-SSH-MIB | Manages Secure Shell (SSH) server and client configuration on H3C/3Com devices, including algorithm selection, session limits, and authenticated user information. |
| A3COM-HUAWEI-WEB-AUTHENTICATION-MIB | Manages web-based (HTTP) user authentication on H3C/3Com network access devices, providing portal redirect configuration and authenticated session tables. |
| A3COM-HUAWEI-WIPS-MIB | Manages Wireless Intrusion Prevention System (WIPS) on H3C/3Com wireless infrastructure, providing rogue AP detection, countermeasure policy, and attack notification objects. |
| ACC-IPSEC | Manages IPsec VPN tunnel configuration on ACC/Ericsson routers, including IKE policy, transform sets, and security association parameters. |
| ACLMGMT-MIB | Manages Access Control List (ACL) configuration and rule sets on network devices for traffic filtering and security policy enforcement. |
| ALCATEL-IEEE8021-PAE-MIB | Alcatel OmniSwitch extension of IEEE 802.1X Port Access Entity MIB for network access authentication management. |
| ALCATEL-IND1-DOT1X-MIB | Alcatel OmniSwitch IEEE 802.1X port-based network access control MIB for supplicant authentication management. |
| ALCATEL-IND1-FIPS-MIB | Alcatel OmniSwitch FIPS 140-2 compliance MIB for managing cryptographic module security policy and status. |
| ALCATEL-IND1-IPSEC-MIB | Alcatel OmniSwitch IPsec MIB for managing security associations, transform sets, and encryption policy configuration. |
| ALCATEL-IND1-NETSEC-MIB | Alcatel OmniSwitch network security MIB for managing ARP/DHCP inspection, IP source guard, and spoofing prevention. |
| ALCATEL-IND1-SSH-MIB | Alcatel OmniSwitch SSH MIB for managing SSH server configuration, host keys, and authorized client access. |
| ALTIGA-ADDRESS-STATS-MIB | Altiga (Cisco VPN 3000) MIB for monitoring address pool utilization and dynamic IP address allocation statistics. |
| ALTIGA-BMGT-STATS-MIB | Altiga (Cisco VPN 3000) bandwidth management statistics MIB for monitoring per-tunnel bandwidth usage and policing. |
| ALTIGA-CAP | Altiga (Cisco VPN 3000) capabilities MIB defining the root OID and supported feature capability registrations. |
| ALTIGA-CERT-STATS-MIB | Altiga (Cisco VPN 3000) certificate statistics MIB for monitoring PKI certificate validation and enrollment activity. |
| ALTIGA-DHCP-SERVER-STATS-MIB | Altiga (Cisco VPN 3000) DHCP server statistics MIB for monitoring address pool leases and server request counts. |
| ALTIGA-DHCP-STATS-MIB | Altiga (Cisco VPN 3000) DHCP client statistics MIB for monitoring DHCP relay and client address acquisition events. |
| ALTIGA-DNS-STATS-MIB | Altiga (Cisco VPN 3000) DNS statistics MIB for monitoring DNS proxy query counts and resolution performance. |
| ALTIGA-EVENT-STATS-MIB | Altiga (Cisco VPN 3000) event statistics MIB for monitoring system event log counts and severity distribution. |
| ALTIGA-FILTER-STATS-MIB | Altiga (Cisco VPN 3000) filter statistics MIB for monitoring packet filter rule hit counters and drop events. |
| ALTIGA-FTP-STATS-MIB | Altiga (Cisco VPN 3000) FTP statistics MIB for monitoring FTP proxy session counts and data transfer statistics. |
| ALTIGA-GENERAL-STATS-MIB | Provides general statistics for Altiga (Cisco) VPN 3000 series concentrators, including CPU utilization, active sessions, and throughput counters. |
| ALTIGA-GLOBAL-REG | Central registration MIB for Altiga Networks (now Cisco) VPN 3000 series concentrators, providing the root OID namespace and module identity used by all other Altiga MIBs. |
| ALTIGA-HARDWARE-STATS-MIB IPNM ✓ | Cisco (formerly Altiga Networks) MIB providing hardware statistics for VPN concentrator appliances, including board-level sensor data such as voltage, temperature, and fan status. |
| ALTIGA-HTTP-STATS-MIB | Altiga (Cisco VPN 3000) HTTP statistics MIB for monitoring WebVPN HTTP proxy sessions and traffic volumes. |
| ALTIGA-IP-STATS-MIB | Altiga (Cisco VPN 3000) IP statistics MIB for monitoring IP packet forwarding, fragmentation, and error counters. |
| ALTIGA-L2TP-STATS-MIB | Altiga (Cisco VPN 3000) L2TP statistics MIB for monitoring L2TP tunnel and session establishment counters. |
| ALTIGA-LBSSF-STATS-MIB | Altiga (Cisco VPN 3000) load balancing and session state failover statistics MIB for cluster performance monitoring. |
| ALTIGA-MIB | Root MIB module for Altiga Networks (now Cisco) VPN concentrator products, defining the base OID structure for all Altiga sub-MIBs. |
| ALTIGA-MULTILINK-STATS-MIB | Altiga (Cisco VPN 3000) multilink PPP statistics MIB for monitoring bundle aggregation and link utilization. |
| ALTIGA-NAT-STATS-MIB | Altiga (Cisco VPN 3000) NAT statistics MIB for monitoring network address translation session counts and mappings. |
| ALTIGA-PPP-STATS-MIB | Altiga (Cisco VPN 3000) PPP statistics MIB for monitoring PPP connection negotiation and link quality counters. |
| ALTIGA-PPPOE-STATS-MIB | Altiga (Cisco VPN 3000) PPPoE statistics MIB for monitoring PPPoE session discovery and establishment events. |
| ALTIGA-PPTP-STATS-MIB | Altiga (Cisco VPN 3000) PPTP statistics MIB for monitoring PPTP tunnel and GRE session establishment counters. |
| ALTIGA-SDI-ACE-STATS-MIB | Altiga (Cisco VPN 3000) SDI/ACE server statistics MIB for monitoring RSA SecurID token authentication activity. |
| ALTIGA-SEP-STATS-MIB | Altiga (Cisco VPN 3000) SEP (Scalable Encryption Processor) statistics MIB for monitoring crypto hardware utilization. |
| ALTIGA-SESSION-STATS-MIB | Altiga (Cisco VPN 3000) session statistics MIB for monitoring active VPN tunnel counts, types, and peak usage. |
| ALTIGA-SSH-STATS-MIB | Altiga (Cisco VPN 3000) SSH statistics MIB for monitoring SSH management session establishment and activity. |
| ALTIGA-SSL-STATS-MIB | Altiga (Cisco VPN 3000) SSL VPN statistics MIB for monitoring WebVPN session counts and SSL handshake events. |
| ALTIGA-SYNC-STATS-MIB | Altiga (Cisco VPN 3000) synchronization statistics MIB for monitoring session state synchronization in HA clusters. |
| ALTIGA-T1E1-STATS-MIB | Altiga (Cisco VPN 3000) T1/E1 WAN interface statistics MIB for monitoring line errors and signal quality. |
| ALTIGA-TELNET-STATS-MIB | Altiga (Cisco VPN 3000) Telnet statistics MIB for monitoring Telnet management session counts and access events. |
| ALTIGA-VERSION-STATS-MIB | Altiga (Cisco VPN 3000) version statistics MIB providing software version, build, and platform identity information. |
| ANTIVIRUS-MIB | Antivirus and anti-malware engine status, signature version, and scan result reporting via SNMP. |
| APSECURITY-MIB | Covers security policy enforcement on Acme Packet SBCs, encompassing ACLs, IPsec, and DoS prevention mechanisms. |
| ARBOR-SMI | Arbor Networks Peakflow DDoS detection and mitigation platform SMI OID structure. |
| ARP-Spoofing-Prevent-MIB | ARP spoofing and gratuitous ARP attack detection, logging, and prevention policy management. |
| ARUBAWIRED-PORT-ACCESS-MIB | Controls port-based network access authentication and authorization on Aruba CX switches. |
| ARUBAWIRED-PORTSECURITY-MIB | Manages MAC-based port security policies and violation actions on Aruba CX switches. |
| ASCEND-FIREWALL-MIB | Configures and monitors firewall access control rules and statistics on Ascend devices. |
| ASCEND-MIBFILTR-MIB | Manages packet filter rule sets and access control lists on Ascend WAN access equipment. |
| ASCEND-MIBFWALL-MIB | Manages firewall session tracking, policy rules, and traffic filtering on Ascend equipment. |
| ASCEND-MIBIKE-MIB | Manages IKE (Internet Key Exchange) phase negotiation and SA parameters on Ascend VPN equipment. |
| ASCEND-MIBIKESPD-MIB | Manages IKE security policy database entries and selector rules on Ascend VPN equipment. |
| ASCEND-MIBINTEGRITY-MIB | Manages data integrity verification and checksumming for Ascend WAN access equipment. |
| ASCEND-MIBIPSEC-MIB | Manages IPSec tunnel configuration, security associations, and transform sets on Ascend equipment. |
| ASCEND-MIBIPSECPOLICY-MIB | Manages IPSec security policy rules and traffic selectors on Ascend VPN equipment. |
| ASCEND-MIBIPSECSPD-MIB | Manages IPSec security policy database entries and binding rules on Ascend VPN equipment. |
| ASCEND-MIBL2TUNNEL-MIB | Manages Layer 2 tunneling protocol (L2TP/L2F) session and tunnel parameters on Ascend equipment. |
| ASCEND-MIBSCRTY-MIB | Manages security authentication and access control settings on Ascend access equipment. |
| ASCEND-MIBXAUTH-MIB | Manages extended authentication (XAuth) parameters for IPSec VPN on Ascend access equipment. |
| ASTARO-MIB | Monitors Astaro (Sophos) UTM security appliances, reporting firewall policy counters, VPN tunnel status, and threat detection statistics. |
| AT-FIREWALL-MIB | Manages stateful firewall policy rules, connection tracking tables, and packet filter statistics on Allied Telesis security gateways. |
| ATT-VPN-GATEWAY-MIB | Manages AT&T VPN gateway devices, providing tunnel establishment status, authentication events, and throughput metrics. |
| ATTACK-MIB | Monitors network attack detection and prevention events, reporting intrusion attempt counters and blocked source addresses. |
| AVAYA-IPSEC-MIB | Manages IPsec VPN tunnel configuration, IKE negotiation status, and SA lifetime statistics on Avaya network gateways. |
| AVENTAIL-FIPS-MIBS | Manages FIPS 140-2 cryptographic module status and compliance validation on Aventail/SonicWall SSL VPN appliances. |
| AVENTAIL-MIB | Monitors Aventail SSL VPN appliance system health, user session counts, and tunnel throughput metrics. |
| AVENTAIL-NG-SERVER-MIBS | Monitors Aventail next-generation SSL VPN server services including authentication, policy, and tunnel server health. |
| AVENTAIL-SECURITY-HISTORY-MIB | Provides security event history and audit log retrieval for Aventail SSL VPN access policy violations. |
| AVENTAIL-SERVICE-HEALTH-MIB | Monitors individual service component health and availability within Aventail SSL VPN appliances. |
| AVENTAIL-SYSTEM-HEALTH-MIB | Reports overall system health status, resource utilization, and hardware sensor readings on Aventail SSL VPN devices. |
| AVENTAIL-SYSTEM-INFO-MIB | Provides system identification, software version, and licensing information for Aventail SSL VPN appliances. |
| AVPRODUCT-STATISTICS-MIB | Reports Kaspersky AntiVirus product statistics via SNMP, including scan counts, detected threats, and protection status. |
| AVQUARANTINE-STATISTICS-MIB | Provides Kaspersky AntiVirus quarantine statistics, tracking the number of quarantined objects and quarantine storage usage. |
| AVUPDATE-STATISTICS-MIB | Tracks Kaspersky AntiVirus update statistics, including last update time, update success/failure counts, and database version. |
| AVVIRUSES-STATISTICS-MIB | Reports Kaspersky AntiVirus virus detection statistics, including virus names, detection counts, and outbreak counters. |
| BARRACUDA-REF | Defines the Barracuda Networks enterprise OID reference hierarchy used across Barracuda security appliance MIB modules. |
| BAY-STACK-ARP-INSPECTION-MIB | Manages Dynamic ARP Inspection (DAI) configuration and violation counters on Avaya/Nortel ERS switches. |
| BAY-STACK-DHCP-SNOOPING-MIB | Manages DHCP snooping binding tables and trusted port configuration on Avaya/Nortel ERS switches. |
| BAY-STACK-DIGITAL-CERT | Manages digital certificate storage, enrollment, and status on Avaya/Nortel BayStack ERS switches. |
| BAY-STACK-SOURCE-GUARD-MIB | Manages IP Source Guard configuration and binding table enforcement on Avaya/Nortel BayStack ERS switches. |
| BAYSTACK-IPV6-FIRST-HOP-SEC-MIB | Manages IPv6 first-hop security features including RA guard, DHCPv6 snooping, and ND inspection on Avaya/Nortel switches. |
| BCN-HA-MIB | Monitors high-availability (HA) cluster state, failover status, and replication health on BlueCat Networks appliances. |
| BEGEMOT-PF-MIB | Manages FreeBSD PF (Packet Filter) firewall rules, state tables, and traffic counters via bsnmpd. |
| BEKARTS-v1-MIB | Provides security compliance monitoring objects for BEKARTS systems, tracking policy violation and audit events. |
| BIANCA-BRICK-CERT-MIB | Manages X.509 digital certificate enrollment and storage for VPN authentication on bintec BIANCA/BRICK routers. |
| BIANCA-BRICK-GRE-MIB | Manages GRE tunnel interface configuration and encapsulation statistics on bintec BIANCA/BRICK routers. |
| BIANCA-BRICK-HIDDENVPN-MIB | Manages hidden/stealth VPN tunnel configuration for concealed IPsec connections on bintec BIANCA/BRICK routers. |
| BIANCA-BRICK-IP-OLDACCESS-MIB | Provides legacy IP access control list configuration objects for older bintec BIANCA/BRICK router firmware. |
| BIANCA-BRICK-IPSEC-MIB | Monitors and configures IPsec VPN tunnels and security associations on bintec elmeg BIANCA/BRICK routers. |
| BIANCA-BRICK-PPTP-MIB | Monitors and configures PPTP VPN tunnel sessions on bintec elmeg BIANCA/BRICK routers. |
| BIANCA-BRICK-SEC-MIB | Manages security policy, firewall rules, and access control lists on bintec elmeg BIANCA/BRICK routers. |
| BLUECOAT-SG-ATTACK-MIB | Monitors detected network attack events and security threat statistics on Blue Coat SG proxy appliances. |
| BLUECOAT-SG-AUTHENTICATION-MIB | Manages authentication realm configuration and user session statistics on Blue Coat SG proxy appliances. |
| BLUECOAT-SG-POLICY-MIB | Manages proxy access policy configuration and enforcement statistics on Blue Coat SG proxy appliances. |
| BORDERWARE-FW-MIB | Monitors firewall rule statistics, connection tables, and security events on Borderware Technologies security gateways. |
| BORDERWARE-MIB | Core enterprise MIB for Borderware Technologies security gateway system management and identification. |
| BORDERWARE-SMG-MIB | Manages Borderware Secure Mail Gateway (SMG) email security service configuration and statistics. |
| BPDU-PROTECTION-MIB | Monitors and configures 802.1D BPDU guard protection on switch ports to prevent STP topology attacks. |
| BRCD-DOT1X-MIB | Manages IEEE 802.1X port-based network access control configuration on Brocade network switches. |
| CBS-VRRP-MIB | Manages Virtual Router Redundancy Protocol (VRRP) configuration and status on Cisco CBS series small business switches. |
| CHECKPOINT-GAIA-TRAP-MIB | Specifies SNMP trap notifications tied to Check Point Gaia OS events, covering security policy modifications and system fault alerts. |
| CHECKPOINT-MIB | Manages Check Point firewall and VPN gateway including policy status, connection table statistics, and security module health. |
| CHECKPOINT-MIB-1 | Provides management objects for Check Point firewall appliance monitoring including interface status and security policy enforcement. |
| CHECKPOINT-MIB-2 | Extends Check Point firewall management with additional objects for advanced threat prevention and security blade status. |
| CHECKPOINT-TRAP-MIB | Defines SNMP trap notifications for Check Point security gateway fault conditions and security event alerts. |
| CIE1000-HTTPS-MIB | Manages HTTPS secure web access configuration and TLS certificate settings on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-PSEC-MIB | Manages port security (802.1X and MAC-based) configuration and violation actions on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-SSH-MIB | Manages SSH server configuration and access key management for secure CLI access on Cisco IE1000 industrial Ethernet switches. |
| CIENA-CES-SECURITY-MIB | Manages security policies, port security, and access controls on Ciena CES Carrier Ethernet switches. |
| CIENA-WS-ENCRYPTION-MIB | Manages optical layer encryption settings and key management on Ciena WaveServer platforms. |
| CIENA-WS-ENCRYPTION-RPC-MIB | Provides RPC-style operations for encryption key exchange on Ciena WaveServer optical platforms. |
| CISCO-802-TAP-MIB | Manages IEEE 802 media lawful intercept tap configuration on Cisco devices. |
| CISCO-ACL-MIB | Manages IP and MAC access control list configuration and statistics on Cisco devices. |
| CISCO-ADMISSION-POLICY-MIB | Manages network admission policy rules and enforcement on Cisco devices. |
| CISCO-AUTH-FRAMEWORK-MIB | Manages Cisco 802.1X port-based authentication framework configuration and session state. |
| CISCO-CABLE-L2VPN-MIB | Manages Layer 2 VPN services over DOCSIS cable networks on Cisco CMTS platforms. |
| CISCO-CATOS-ACL-QOS-MIB | Manages ACL-based QoS policy configuration on Cisco Catalyst switches running CatOS. |
| CISCO-CBP-TARGET-MIB | Manages Class-Based Policy (CBP) target bindings for attaching policies to interfaces on Cisco devices. |
| CISCO-COMMON-ROLES-EXT-MIB | Extends Cisco role-based access control with additional permission rules and role attribute definitions for device management. |
| CISCO-COMMON-ROLES-MIB | Manages role-based access control (RBAC) on Cisco devices, defining user roles, associated privileges, and access scope. |
| CISCO-CRYPTO-ACCELERATOR-MIB | Monitors Cisco hardware cryptographic accelerator modules, providing statistics on encryption throughput, key operations, and acceleration offload. |
| CISCO-DHCP-SNOOPING-CAPABILITY | Defines SNMP agent capability statements for the Cisco DHCP Snooping MIB on Catalyst switch platforms. |
| CISCO-DHCP-SNOOPING-MIB | Manages DHCP snooping security on Cisco switches, controlling trusted/untrusted port assignments and binding table entries. |
| CISCO-DYNAMIC-ARP-INSPECTION-CAPABILITY | Defines SNMP agent capability statements for Cisco Dynamic ARP Inspection security MIB on Catalyst switch platforms. |
| CISCO-DYNAMIC-ARP-INSPECTION-MIB | Manages Dynamic ARP Inspection (DAI) on Cisco switches, monitoring ARP packet validation, binding table entries, and violation counts. |
| CISCO-ENH-IPSEC-FLOW-CAPABILITY | Defines SNMP agent capability statements for Cisco enhanced IPSec flow monitoring MIB on IOS security platforms. |
| CISCO-ENHANCED-IPSEC-FLOW-MIB | Monitors IPSec tunnel flow statistics on Cisco security devices, tracking SA negotiations, encrypted packet counts, and flow lifetimes. |
| CISCO-FCSP-MIB | Provides management objects for configuring and monitoring Fibre Channel Security Protocol (FC-SP) authentication between fabric entities on Cisco MDS switches. |
| CISCO-FILTER-GROUP-MIB | Provides management objects for defining and managing named traffic filter groups applied to network interfaces on Cisco devices. |
| CISCO-FIPS-STATS-MIB | Provides management objects for monitoring FIPS 140 cryptographic compliance statistics on Cisco security appliances and routers. |
| CISCO-FIREWALL-MIB IPNM ✓ | Monitors Cisco firewall devices, providing connection statistics and security event information for firewall activity tracking. |
| CISCO-FIREWALL-TC | Defines textual conventions for Cisco firewall MIBs including firewall policy, connection, and rule types. |
| CISCO-GDOI-MIB | Provides management objects for the Group Domain of Interpretation (GDOI) protocol used in GET VPN group key management on Cisco routers. |
| CISCO-HARDWARE-IP-VERIFY-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HARDWARE-IP-VERIFY-MIB hardware-accelerated uRPF implementation. |
| CISCO-HARDWARE-IP-VERIFY-MIB | Provides management objects for monitoring hardware-based IP source verification (uRPF) statistics on Cisco platforms. |
| CISCO-IEEE8021-PAE-CAPABILITY | Declares SNMP agent capability statements for the IEEE 802.1X Port Access Entity MIB implementation on Cisco switches. |
| CISCO-IETF-NAT-CAPABILITY | Declares agent capability for the IETF NAT MIB on Cisco platforms. |
| CISCO-IETF-NAT-MIB IPNM ✓ | Contains objects for monitoring and managing Network Address Translation (NAT) operations including NAT configuration, address bindings, and runtime statistics. |
| CISCO-IETF-PPVPN-MPLS-VPN-MIB | Implements the IETF Provider Provisioned VPN MPLS-VPN draft MIB for L3VPN management. |
| CISCO-IETF-VPLS-BGP-EXT-MIB | Extends the IETF VPLS BGP MIB for Virtual Private LAN Service BGP signaling management on Cisco devices. |
| CISCO-IETF-VPLS-GENERIC-MIB | Implements the IETF generic VPLS MIB for Virtual Private LAN Service instance management. |
| CISCO-IETF-VPLS-LDP-MIB | Implements the IETF VPLS LDP MIB for managing LDP-signaled Virtual Private LAN Service instances. |
| CISCO-IKE-CONF-CAPABILITY | States agent capability information for the Cisco IKE configuration MIB. |
| CISCO-IKE-CONFIGURATION-MIB | Manages IKE phase 1 and phase 2 policy, proposal, and security association configuration for IPsec VPNs. |
| CISCO-IKE-FLOW-CAPABILITY | Declares SNMP agent capabilities for the Cisco IKE flow monitoring MIB on VPN-capable platforms. |
| CISCO-IKE-FLOW-EXT-CAPABILITY | Declares agent capability for Cisco IKE flow statistics extension MIB. |
| CISCO-IKE-FLOW-EXT-MIB | Provides extended IKE flow statistics including tunnel counts, SA lifetimes, and negotiation metrics. |
| CISCO-IKE-FLOW-MIB | Monitors IKE (Internet Key Exchange) phase 1 and phase 2 negotiations and active security associations for IPSec VPNs. |
| CISCO-IP-ENCRYPTION-MIB | Manages IP-level encryption configuration and session statistics on Cisco devices. |
| CISCO-IP-TAP-CAPABILITY | Declares agent capability for the Cisco IP lawful intercept tap MIB. |
| CISCO-IP-TAP-MIB | Manages IP lawful intercept configurations specifying traffic streams to be intercepted and delivered. |
| CISCO-IP-URPF-MIB | Configures Unicast Reverse Path Forwarding (uRPF) and reports drop statistics on Cisco interfaces. |
| CISCO-IPSEC-FLOW-MONITOR-MIB IPNM ✓ | Monitors active IPSec tunnels, security associations, and encrypted traffic flow statistics on Cisco devices. |
| CISCO-IPSEC-MIB IPNM ✓ | Contains objects for configuring and managing IPSec-based Virtual Private Networks (VPNs). |
| CISCO-IPSEC-POLICY-MAP-MIB | Maps IPSec policy entries to the traffic flows and interfaces they protect on Cisco VPN devices. |
| CISCO-IPSEC-PROV-CAPABILITY | Declares agent capability for the Cisco IPsec provisioning MIB. |
| CISCO-IPSEC-PROVISIONING-MIB | Manages IPsec tunnel provisioning including crypto maps, transform sets, and security association parameters. |
| CISCO-IPSEC-SIGNALING-CAPABILITY | Declares agent capability for the Cisco IPsec signaling (IKE) management MIB. |
| CISCO-IPSEC-SIGNALING-MIB | Manages IPsec IKE signaling parameters, phase 1/2 negotiations, and security association state. |
| CISCO-IPSEC-TC | Defines textual conventions for Cisco IPsec MIBs including encryption algorithms and SA types. |
| CISCO-L2-TUNNEL-CONFIG-MIB | Configures Layer 2 protocol tunneling over provider networks to transparently carry customer L2 control traffic. |
| CISCO-L2NAT-MIB | Manages Layer 2 Network Address Translation for address rewriting at the Ethernet frame level. |
| CISCO-LOCAL-AUTH-USER-MIB | Manages local authentication user database entries including credentials and access privileges. |
| CISCO-LWAPP-ACL-MIB | Manages LWAPP/CAPWAP wireless LAN controller ACL rules applied to WLAN traffic. |
| CISCO-LWAPP-MFP-CAPABILITY | Declares agent capability for LWAPP Management Frame Protection (MFP) on Cisco WLC. |
| CISCO-LWAPP-WLAN-SECURITY-MIB | Manages WLAN security settings including 802.1X, WPA, and encryption on Cisco LWAPP wireless controllers. |
| CISCO-MAC-AUTH-BYPASS-CAPABILITY | States SNMP agent capabilities related to MAC Authentication Bypass (MAB) on Cisco network access devices. |
| CISCO-MAC-AUTH-BYPASS-MIB | Manages MAC Authentication Bypass configuration allowing non-802.1X devices to authenticate via MAC address. |
| CISCO-MOBILITY-TAP-MIB | Manages lawful intercept tap configurations for monitoring mobile subscriber traffic on Cisco platforms. |
| CISCO-MVPN-MIB | Manages Multicast VPN (MVPN) including MDT tunnels, PIM configuration, and multicast routing in VPN contexts. |
| CISCO-NAC-NAD-CAPABILITY | Declares SNMP agent capabilities for Network Admission Control Network Access Device functions on Cisco platforms. |
| CISCO-NAC-NAD-MIB | Manages Network Admission Control (NAC) on Cisco network access devices for host posture validation and enforcement. |
| CISCO-NAC-TC-MIB | Defines textual conventions for Network Admission Control (NAC) data types used in Cisco NAC MIB modules. |
| CISCO-NAT-CGN-EXT-MIB | Manages Carrier-Grade NAT (CGN) address translation pools, mappings, and statistics on Cisco service provider routers. |
| CISCO-NAT-EXT-MIB | Extends NAT management with Cisco-specific address translation statistics and session tracking on Cisco routers. |
| CISCO-NHRP-EXT-MIB | Extends NHRP management with Cisco-specific attributes for DMVPN spoke-to-spoke tunnel establishment. |
| CISCO-PAE-CAPABILITY | Declares SNMP agent capabilities for Port Access Entity (802.1X) management on Cisco switching platforms. |
| CISCO-PAE-MIB | Extends IEEE 802.1X Port Access Entity management with Cisco-specific supplicant and authenticator objects. |
| CISCO-PKI-MIB | Manages PKI certificate enrollment, trustpoints, and certificate lifecycle on Cisco security-enabled devices. |
| CISCO-PKI-PARTICIPATION-MIB | Manages PKI certificate enrollment and participation including certificate request and CA interaction on Cisco devices. |
| CISCO-PORT-SECURITY-CAPABILITY | Declares SNMP agent capabilities for port security MAC address limiting on Cisco switching platforms. |
| CISCO-PORT-SECURITY-MIB IPNM ✓ | Manages port security configuration limiting MAC addresses and detecting violations on Cisco switch ports. |
| CISCO-PSM-MIB | Manages Port Security Manager policies controlling port-level access based on MAC and IP addresses. |
| CISCO-PSM-MIB-CAPABILITY | Declares agent capabilities for Port Security Manager (PSM) controlling MAC address-based port access. |
| CISCO-REMOTE-ACCESS-MONITOR-MIB IPNM ✓ | Tracks remote access VPN structures spanning Layer 2 (PPTP, L2TP, L2F), Layer 3 (IPSec), and Layer 4 (SSL) VPNs. |
| CISCO-SDWAN-SECURITY-MIB | Monitors security policy enforcement and threat detection statistics on Cisco SD-WAN edge devices. |
| CISCO-SECURE-SHELL-CAPABILITY | Declares agent capability statements for Cisco Secure Shell (SSH) protocol management MIB implementations. |
| CISCO-SECURE-SHELL-MIB | Manages SSH (Secure Shell) sessions, version negotiation, cipher configuration, and connection statistics on Cisco devices. |
| CISCO-SECY-EXT-MIB | Extends IEEE 802.1AE MACsec management for Cisco-specific MAC Security encryption and key agreement parameters. |
| CISCO-SMART-LIC-MIB | Monitors Cisco Smart Licensing registration, entitlement counts, and license compliance status on Cisco devices. |
| CISCO-SSL-PROXY-CAPABILITY | Declares agent capabilities for SSL proxy and offload functionality on Cisco security and load-balancing platforms. |
| CISCO-SSL-PROXY-MIB | Manages SSL proxy and offload sessions including certificate handling and connection statistics on Cisco devices. |
| CISCO-SSLVPN-MIB | Manages Cisco SSL VPN (clientless and AnyConnect) gateway sessions, user authentication, and tunnel statistics. |
| CISCO-SSM-PROV-MIB | Manages Security Services Module (SSM) provisioning including policy and feature configuration for Cisco security appliances. |
| CISCO-TAP-MIB | Manages CALEA lawful intercept tap streams, target identification, and mediation device interfaces on Cisco routers. |
| CISCO-TAP2-CAPABILITY | Declares agent capabilities for CALEA lawful intercept version 2 tap management on Cisco platforms. |
| CISCO-TAP2-MIB | Manages next-generation CALEA lawful intercept streams supporting multiple transport types on Cisco IOS platforms. |
| CISCO-THREAT-MITIGATION-SERVICE-CAPABILITY | States agent capabilities for managing DDoS detection and mitigation through the Cisco Threat Mitigation Service (TMS). |
| CISCO-THREAT-MITIGATION-SERVICE-MIB | Manages Cisco Threat Mitigation Service providing DDoS attack detection, rate limiting, and mitigation policy control. |
| CISCO-TRUSTSEC-CAPABILITY | Declares agent capabilities for Cisco TrustSec general security group tagging and policy enforcement. |
| CISCO-TRUSTSEC-INTERFACE-CAPABILITY | Declares agent capabilities for TrustSec per-interface security group tagging and encryption configuration. |
| CISCO-TRUSTSEC-INTERFACE-MIB | Manages Cisco TrustSec Security Group Tag (SGT) assignments and enforcement on network interfaces. |
| CISCO-TRUSTSEC-MIB | Manages Cisco TrustSec security including Security Group Tags (SGT), SGACL enforcement, and PAC provisioning. |
| CISCO-TRUSTSEC-POLICY-CAPABILITY | Declares agent capabilities for TrustSec security group policy enforcement and SGACL management. |
| CISCO-TRUSTSEC-POLICY-MIB | Manages Cisco TrustSec SGACL policy download, binding, and enforcement for security group-based access control. |
| CISCO-TRUSTSEC-SERVER-CAPABILITY | Declares agent capabilities for TrustSec server (ISE/ACS) communication and credential management. |
| CISCO-TRUSTSEC-SERVER-MIB | Manages TrustSec AAA server connections for SGT policy download and device authentication via ISE or ACS. |
| CISCO-TRUSTSEC-SXP-CAPABILITY | Declares agent capabilities for TrustSec SXP (SGT Exchange Protocol) peer and binding management. |
| CISCO-TRUSTSEC-SXP-MIB | Monitors Cisco TrustSec SXP (SGT Exchange Protocol) peer connections and IP-to-SGT binding propagation. |
| CISCO-TRUSTSEC-TC-MIB | Defines textual conventions for Cisco TrustSec MIBs including Security Group Tag and policy data types. |
| CISCO-UNIFIED-FIREWALL-MIB | Manages Cisco unified firewall providing session statistics, connection counts, and policy enforcement metrics. |
| CISCO-USER-CONNECTION-TAP-MIB | Manages lawful intercept taps for user connections enabling court-ordered monitoring of network sessions. |
| CISCO-VOIP-TAP-MIB | Manages Cisco VoIP lawful intercept (CALEA) tapping, enabling authorized monitoring of VoIP calls. |
| CISCO-VPDN-MGMT-EXT-MIB | Adds further objects for tunnel and session diagnostics to Cisco VPDN management. |
| CISCO-VPDN-MGMT-MIB | Manages Cisco Virtual Private Dial-up Network (VPDN) tunnels, sessions, and user authentication statistics. |
| CISCO-VPN-LIC-USAGE-MONITOR-MIB | Monitors Cisco VPN license usage including active sessions and license capacity thresholds. |
| CISCO-VRF-MIB | Manages Cisco VPN Routing and Forwarding (VRF) instances including interface associations and routing tables. |
| CISCOSB-BRIDGE-SECURITY | Manages Cisco Small Business bridge security features including port security and MAC filtering. |
| CISCOSB-DIGITALKEYMANAGE-MIB | Manages Cisco Small Business digital key and certificate management for secure communications. |
| CISCOSB-SECSD-MIB | Manages Cisco Small Business security storm-control and denial-of-service protection features. |
| CISCOSB-SECURITY-SUITE | Manages Cisco Small Business integrated security suite features including firewall and access control. |
| CISCOSB-SSH-MIB | Configures and monitors SSH server settings and active sessions on Cisco Small Business switches. |
| CISCOSB-SSL | Manages SSL/TLS certificate and session configuration for secure web management on Cisco Small Business switches. |
| CLAVISTER-MIB | Provides management objects for Clavister network security appliances including firewall and VPN status. |
| CLAVISTER-TRAPS-MIB | Defines SNMP trap notifications for Clavister security appliance events and policy violations. |
| CM-SECURITY-MIB | Sets encryption, authentication, and other security parameters for Ceragon microwave radio links. |
| CONTIVITY-ID-V1-MIB | Defines product identification and registration objects for Nortel Contivity VPN concentrators. |
| CONTIVITY-INFO-V1-MIB | Provides operational status and configuration information for Nortel Contivity VPN concentrators. |
| CONTIVITY-TRAP-ACKNOWLEDGMENT-MIB | Manages trap acknowledgment tracking and confirmation for Nortel Contivity VPN event notifications. |
| CONTIVITY-TRAPS-V1-MIB | Defines SNMP trap notifications for Nortel Contivity VPN concentrator events and alarms. |
| CORERO-CMS-MIB | Manages Corero CMS DDoS mitigation platform configuration and attack detection statistics. |
| CORERO-MIB | Provides base management objects and OID registration for Corero network security products. |
| CP-MIB | Provides management objects for Check Point security gateway and firewall policy status. |
| CROSSBEAM-SYSTEMS-MIB | Manages Crossbeam Systems network security platform providing chassis, module, and application blade monitoring. |
| CT-DARADIUS-MIB | Configures Cabletron/Enterasys direct-attached RADIUS authentication server parameters and accounting settings. |
| CTRON-NAT-MIB | Manages Cabletron Network Address Translation configuration, NAT table entries, and address pool management. |
| CTRON-REMOTE-ACCESS-MIB | Manages Cabletron remote access server configuration, dial-in user sessions, and PPP/ISDN parameters. |
| CXFLT-IP-MIB | Configures Aastra IP traffic filtering rules, access control lists, and packet filter policy management. |
| CXFLT-IPX-MIB | Configures Aastra IPX traffic filtering rules and access control lists for Novell protocol filtering. |
| CXFLT-IPXSAP-MIB | Configures Aastra IPX SAP (Service Advertisement Protocol) filters to control SAP broadcast propagation. |
| DELLEMC-OS10-PORT-SECURITY-MIB | Manages port security MAC address lockdown and violation policies for Dell EMC OS10 switches. |
| DENIALOFSERVICE-PRIVATE-MIB | Manages denial-of-service attack detection thresholds and mitigation response statistics. |
| DFL1660-MIB | Manages D-Link DFL-1660 firewall/UTM security appliance configuration and security policies. |
| DFL210-MIB | Manages D-Link DFL-210 firewall appliance security policies, VPN, and network interfaces. |
| DFL2500-MIB | Manages D-Link DFL-2500 enterprise firewall configuration, policies, and VPN tunnels. |
| DFL2560-MIB | Manages D-Link DFL-2560 enterprise firewall security configuration and traffic monitoring. |
| DFL260-MIB | Manages D-Link DFL-260 firewall/UTM appliance configuration, policies, and VPN settings. |
| DFL800-MIB | Manages D-Link DFL-800 network security appliance firewall rules and VPN configuration. |
| DFL860-MIB | Manages D-Link DFL-860 firewall/UTM appliance configuration, VPN tunnels, and threat policies. |
| EdgeSwitch-CAPTIVE-PORTAL-MIB | Ubiquiti EdgeSwitch captive portal MIB for configuring and monitoring web-based network access control for guest users. |
| EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB | Ubiquiti EdgeSwitch DoS protection MIB for configuring denial-of-service attack prevention policies and monitoring attack statistics. |
| EdgeSwitch-KEYING-PRIVATE-MIB | Ubiquiti EdgeSwitch keying MIB for managing cryptographic key configuration and security credential settings. |
| EdgeSwitch-MGMT-SECURITY-MIB | Ubiquiti EdgeSwitch management security MIB for controlling access to the management plane including ACLs and login policies. |
| EdgeSwitch-PORTSECURITY-PRIVATE-MIB | Ubiquiti EdgeSwitch port security MIB for configuring MAC address locking, violation actions, and secure port status. |
| EMBEDDED-NGX-MIB | Check Point Embedded NGX MIB for managing embedded Next Generation security appliances including firewall and VPN status. |
| ENTERASYS-ANTI-SPOOF-MIB | Enterasys Networks MIB for configuring IP/MAC anti-spoofing protection to prevent address impersonation attacks. |
| ENTERASYS-FIREWALL-MIB | Enterasys Networks MIB for configuring and monitoring firewall policies, rules, and connection tracking on Enterasys devices. |
| ENTERASYS-IPSEC-NOTIFICATION-MIB | Enterasys Networks MIB defining SNMP notifications for monitoring IPsec security association events on routers. |
| ENTERASYS-PKI-MIB | Enterasys Networks MIB for monitoring PKI certificate events and expiration notifications on Enterasys network devices. |
| ENTERASYS-TLS-MIB | Enterasys Networks Transport Layer Security (TLS/SSL) MIB for configuring encrypted management session parameters on embedded systems. |
| EXTREME-IP-SECURITY-MIB | Extreme Networks MIB for IP security features including Dynamic ARP Inspection, IP source guard, and DHCP snooping configurations. |
| F10-FIPSNOOPING-MIB | Dell Force10 MIB for First-hop IP security snooping (DHCP snooping, ARP inspection) configuration and statistics. |
| F3-EOMPLS-MIB | ADVA Optical Networking F3 platform MIB for Ethernet over MPLS (EoMPLS) pseudowire configuration and monitoring. |
| F3-PWE3-MIB | ADVA Optical Networking F3 platform MIB for Pseudowire Edge-to-Edge Emulation (PWE3) service configuration and status. |
| FASTPATH-DENIALOFSERVICE-PRIVATE-MIB | Broadcom FastPath MIB for Denial-of-Service (DoS) attack prevention configuration and filtering policies on FastPath switches. |
| FASTPATH-MGMT-SECURITY-MIB | Broadcom FastPath MIB for management plane security including access control lists for SNMP, Telnet, SSH, and HTTP management. |
| FDRY-DAI-MIB | Foundry/Brocade FastIron MIB for Dynamic ARP Inspection (DAI) configuration and trusted port settings for ARP security. |
| FDRY-DHCP-SNOOPING-MIB | Foundry/Brocade FastIron MIB for DHCP snooping configuration and binding table management for IP security on Foundry switches. |
| FDRY-IP-SOURCE-GUARD-MIB | Foundry/Brocade FastIron MIB for IP Source Guard configuration, filtering unauthorized IP traffic based on DHCP snooping bindings. |
| FE-FIREEYE-MIB | FireEye network security appliance MIB providing management objects for threat detection events and appliance operational status. |
| H3C-DVPN-MIB | H3C MIB for Dynamic VPN (DVPN) tunnel management including hub-spoke topology and session statistics. |
| H3C-FIREWALL-MIB | H3C MIB for firewall policy management including security zones, rules, session tables, and traffic statistics. |
| H3C-IDS-MIB | H3C MIB for Intrusion Detection System (IDS) management including attack signature rules and detection statistics. |
| H3C-IKE-MONITOR-MIB | H3C MIB for monitoring IKE (Internet Key Exchange) phase 1 and phase 2 security association states. |
| H3C-IPSEC-MONITOR-MIB | H3C MIB for IPsec VPN monitoring including security associations, tunnel status, and traffic statistics. |
| H3C-IPSEC-MONITOR-V2-MIB | H3C MIB version 2 for enhanced IPsec VPN monitoring with extended security association and tunnel statistics. |
| H3C-L2VPN-PWE3-MIB | H3C MIB for Layer 2 VPN pseudowire edge-to-edge emulation (PWE3) managing Ethernet and other L2 circuits. |
| H3C-LI-MIB | H3C MIB for Lawful Intercept (LI) management configuring and monitoring lawful intercept sessions on H3C devices. |
| H3C-NAT-MIB | H3C MIB for Network Address Translation management including NAT rules, address pools, and session statistics. |
| H3C-NVGRE-MIB | H3C MIB for NVGRE (Network Virtualization using GRE) managing virtual network overlays in data center environments. |
| H3C-TUNNEL-MIB | H3C MIB for generic tunnel interface management covering GRE, IP-in-IP, and other encapsulation tunnel types. |
| H3C-VSI-MIB | H3C MIB for Virtual Switch Instance (VSI) management in VPLS and EVPN-based Layer 2 VPN service deployments. |
| H3C-VXLAN-MIB | H3C MIB for VXLAN overlay network management including VTEP configuration, VNI mappings, and tunnel statistics. |
| HH3C-BGP-EVPN-MIB | Manages BGP EVPN (Ethernet VPN) routes, MAC/IP advertisements, and VTEP associations on H3C devices. |
| HH3C-BGP-VPN-MIB | Manages BGP-based MPLS VPN instances, route targets, and peer configurations on H3C provider-edge routers. |
| HH3C-DVPN-MIB | Manages Dynamic VPN (DVPN) tunnels and hub-spoke topology configuration on H3C routers. |
| HH3C-EVI-MIB | Manages Ethernet Virtual Interconnect (EVI) overlay tunnels for Layer 2 WAN extension on H3C routers. |
| HH3C-EVPN-MIB | Covers Ethernet VPN (EVPN) on H3C network devices, including instance management, ESI bindings, and MAC route distribution. |
| HH3C-GRE-MIB | Manages GRE tunnel interface configuration and keepalive statistics on H3C routing platforms. |
| HH3C-IKE-MONITOR-MIB | Monitors IKE (Internet Key Exchange) phase-1 and phase-2 SA negotiations and statistics on H3C VPN gateways. |
| HH3C-IPSEC-MONITOR-MIB | Monitors IPsec security associations, tunnel status, and encrypted traffic statistics on H3C VPN platforms. |
| HH3C-IPSEC-MONITOR-V2-MIB | Provides enhanced IPsec monitoring objects including SA lifetime and rekeying statistics on H3C VPN gateways. |
| HH3C-L2TP-MIB | Manages L2TP tunnel and session configuration, statistics, and control messages on H3C VPN access devices. |
| HH3C-L2VPN-MIB | Manages Layer 2 VPN service instances, cross-connect tables, and pseudowire bindings on H3C PE devices. |
| HH3C-L2VPN-PWE3-MIB | Manages PWE3 (Pseudowire Emulation Edge-to-Edge) circuit configuration and status on H3C provider-edge routers. |
| HH3C-SSLVPN-MIB | HH3C MIB for SSL VPN gateway configuration managing virtual gateways and remote access policies on H3C devices. |
| HH3C-TUNNEL-MIB | HH3C MIB for tunnel interface management supporting GRE, IPsec, and other tunnel types on H3C devices. |
| HH3C-VPN-PEER-MIB | HH3C MIB for VPN peer management configuring and monitoring VPN peer relationships on H3C security devices. |
| HM2-DOS-MITIGATION-MIB | Hirschmann HiOS (HM2) denial-of-service mitigation MIB for configuring DoS attack protection mechanisms. |
| HM2-VPN-MIB | Hirschmann HiOS (HM2) VPN MIB for IPsec and SSL VPN tunnel configuration and status monitoring. |
| HP-ICF-IP-LOCKDOWN-MIB | HP ICF SNMP MIB for IP source lockdown binding IP addresses to switch ports to prevent IP spoofing on HP ProCurve switches. |
| HP-ICF-SERVICE-TUNNEL-MIB | HP ICF SNMP MIB for service tunnel configuration supporting remote service delivery over encrypted tunnels on HP ProCurve switches. |
| HP-ICF-TUNNELED-NODE-MIB | HP ICF SNMP MIB for tunneled node configuration in HP VAN SDN environments, managing OpenFlow-enabled tunnel endpoints on HP ProCurve switches. |
| HP-ICF-URPF-MIB | An HP ICF SNMP MIB covering Unicast Reverse Path Forwarding (uRPF) configuration on HP ProCurve Layer 3 switches to guard against IP source spoofing. |
| HP-SWITCH-FIPS-MIB | HP SNMP MIB for FIPS 140-2 compliance mode configuration enforcing approved cryptographic standards on HP ProCurve switches. |
| HP-TUNNEL-MIB | HP SNMP MIB for IP tunnel interface configuration and statistics including GRE and IPsec tunnels on HP networking devices. |
| HUAWEI-ACL-MIB | Huawei Access Control List MIB defining objects to configure and monitor ACL rules, groups, and packet filtering policies. |
| HUAWEI-ASPF-EUDM-MIB | Huawei ASPF (Application Specific Packet Filter) extended user data management MIB for stateful application-layer firewall inspection statistics. |
| HUAWEI-ATK-EUDM-MIB | Huawei attack defense extended user data management MIB providing per-user attack detection statistics and defense policy counters. |
| HUAWEI-ATK-MIB | Huawei attack detection and defense MIB for monitoring and configuring protection against DoS/DDoS attacks, scanning, and flooding threats. |
| HUAWEI-BGP-VPN-MIB | Huawei BGP VPN MIB for managing BGP/MPLS IP VPN instances, route targets, and VRF configuration on PE routers. |
| HUAWEI-FIREWALL-MIB | Huawei firewall MIB providing objects to configure security zones, policies, NAT rules, and monitor session tables on Huawei firewall products. |
| HUAWEI-GTSM-MIB | Huawei GTSM (Generalized TTL Security Mechanism) MIB for configuring TTL-based routing protocol security against remote spoofing attacks. |
| HUAWEI-IPSEC-MIB | Huawei IPSec MIB for managing IPSec tunnel policies, security associations, IKE configuration, and VPN tunnel statistics on Huawei security devices. |
| HUAWEI-KOMPELLA-MIB | Huawei Kompella MIB for managing Kompella-mode MPLS L2VPN (VPWS) services using BGP-based signaling as defined by the Kompella draft. |
| HUAWEI-L2VPN-MIB | Huawei L2VPN MIB for managing Layer 2 VPN services including VPLS and VPWS instances, pseudowire endpoints, and service configuration. |
| HUAWEI-L2VPN-OAM-MIB | Huawei L2VPN OAM MIB providing operations, administration, and maintenance objects for fault detection and performance monitoring on L2VPN services. |
| HUAWEI-L2VPN-PW-APS-MIB | Huawei L2VPN pseudowire APS MIB for managing automatic protection switching for pseudowire services to provide 1+1 or 1:1 PW redundancy. |
| HUAWEI-L3VPN-EXT-MIB | Huawei L3VPN extension MIB providing additional objects for MPLS L3VPN management beyond the standard draft-ietf-ppvpn-mpls-vpn-mib. |
| HUAWEI-LI-MIB | Huawei LI (Lawful Intercept) MIB providing management objects for configuring lawful intercept taps and monitoring mediation device communication. |
| HUAWEI-MPLS-BGP-VPN-MIB | Huawei MIB for BGP/MPLS Layer 3 VPNs, managing VPN instances, route targets, and VRF routing tables. |
| HUAWEI-SECURITY-HRP-MIB | Huawei security HRP (Huawei Redundancy Protocol) MIB for managing firewall high-availability heartbeat and session synchronization. |
| HUAWEI-SECURITY-IPSEC-MIB | Huawei security IPsec MIB for managing IKE policies, IPsec tunnels, transform sets, and security association statistics. |
| HUAWEI-SECURITY-MIB | Huawei security MIB providing comprehensive firewall policy management, zone definitions, and security service configuration. |
| HUAWEI-TUNNEL-EXT-MIB | Huawei MIB with vendor-specific objects for managing tunnels of various types, including GRE and IPv6-in-IPv4. |
| HUAWEI-TUNNEL-MIB | Huawei tunnel MIB for managing IP tunnel interfaces, encapsulation types, tunnel source/destination, and operational statistics. |
| HUAWEI-VPLS-EXT-MIB | Huawei VPLS extensions MIB providing additional VPLS management objects for MAC learning, flooding, and service OAM. |
| HUAWEI-VPLS-MIB | Huawei VPLS (Virtual Private LAN Service) MIB for managing VPLS instances, pseudowire members, and MAC forwarding databases. |
| HUAWEI-VPLS-TNL-MIB | Huawei VPLS tunnel MIB for managing transport tunnel selection and binding for VPLS pseudowire forwarding. |
| HUAWEI-VPN-DIAGNOSTICS-MIB | Huawei VPN diagnostics MIB for managing VPN connectivity tests, ping/traceroute within VRF contexts, and VPN health monitoring. |
| HUAWEI-VS-MIB | Huawei VS (Virtual System) MIB for managing logical virtual system instances on multi-tenant security and routing devices. |
| IEEE8021-DEVID-MIB | IEEE 802.1 MIB for Device Identity (802.1AR) managing secure device identity certificates and enrollment in Ethernet networks. |
| IEEE8021-SECY-MIB | IEEE 802.1 MIB for MAC Security (MACsec/802.1AE) managing encryption keys, secure channels, and security associations. |
| INNOMINATE-LLDP-MIB | Innominate Security Technologies MIB extending LLDP with proprietary objects for secure industrial networking device discovery. |
| INTEL-FIREWALL-MIB | Intel firewall MIB providing SNMP objects for monitoring connection tables, policy counters, and security events on Intel firewall appliances. |
| INTEL-IPF-MIB | Intel IP filtering MIB providing SNMP objects for access control list configuration and packet filter statistics. |
| INTEL-TUNNEL-MIB | Intel tunneling MIB providing SNMP objects for managing IP-over-IP tunnel interfaces and GRE tunnel configuration. |
| InterSeptor-MIB | InterSeptor network security appliance MIB providing SNMP objects for intrusion detection and traffic monitoring on perimeter devices. |
| IPF-MIB | IP filtering MIB providing SNMP objects for packet filter rule management and traffic statistics on IP firewall implementations. |
| IPFILTER | BSD IP filter MIB providing SNMP objects for monitoring ipfilter packet filtering rule counters and state table on Unix/BSD systems. |
| IPFWACC-MIB | IP firewall accounting MIB providing SNMP objects for collecting per-rule traffic accounting statistics from IP firewall implementations. |
| IPFWADM-MIB | IP firewall administration MIB providing SNMP objects for firewall rule management and access control list configuration. |
| IPSEC-FLOW-MIB-TC | IPsec flow MIB textual conventions (Tivoli/Cisco) defining data types for IPsec security association and flow monitoring objects. |
| IPSEC-IKEACTION-MIB | IETF IPsec IKE action MIB defining SNMP objects for Internet Key Exchange policy actions in IPsec security policy management. |
| IPSEC-IPSECACTION-MIB | IETF IPsec action MIB defining SNMP objects for IPsec security policy action rules including encryption and authentication parameters. |
| IPSEC-ISAKMP-IKE-DOI-TC | Shiva MIB of textual conventions for IPsec/ISAKMP/IKE domain of interpretation (DOI), defining the enumerated types used in IKE negotiation parameters. |
| IPSEC-MIB | IETF IPsec MIB providing SNMP management objects for monitoring IPsec security associations, policies, and tunnel statistics. |
| IPSEC-SA-MON-MIB | IETF IPsec security association monitoring MIB providing SNMP objects for tracking IKE and IPsec SA establishment and lifetime. |
| IPSEC-SPD-MIB IPNM ✓ | Defines managed objects for configuring IPsec Security Policy Database (SPD) entries via SNMP. |
| IPSEC-VPN | PEPLINK IPsec VPN MIB providing SNMP objects for monitoring IPsec tunnel status, peer connectivity, and traffic statistics. |
| IPsecT1-MIB | Tivoli/Cisco IPsec Tier 1 MIB providing SNMP objects for monitoring IPsec security associations and related IKE statistics. |
| IPSECV1-MIB | IPsec version 1 MIB providing SNMP objects for monitoring legacy IPsec security association state and encryption parameters. |
| IPV6-TUNNEL-MIB | QCI IPv6 tunnel MIB providing SNMP objects for managing IPv6-in-IPv4 tunnel interfaces and transition mechanism parameters. |
| JNX-GDOI-MIB | Defines managed objects for Group Domain of Interpretation (GDOI) on Juniper Networks devices, supporting group key management for IPsec VPN. |
| JNX-IPSEC-MONITOR-MIB | Provides monitoring objects for IPsec security associations and tunnel statistics on Juniper Networks devices. |
| Juniper-IKE-CONF | Defines conformance statements for IKE (Internet Key Exchange) VPN key management on Juniper Networks E-series platforms. |
| Juniper-IKE-MIB | Provides managed objects for IKE negotiation statistics, SA (Security Association) status, and policy on Juniper Networks E-series VPN routers. |
| JUNIPER-IPSEC-FLOW-MON-MIB | Provides managed objects for IPsec tunnel flow monitoring, including SA statistics, packet counts, and error tracking on Juniper Networks devices. |
| Juniper-IPsec-Tunnel-CONF | Defines conformance statements for IPsec VPN tunnel management on Juniper Networks E-series platforms. |
| Juniper-IPsec-Tunnel-MIB | Provides managed objects for IPsec VPN tunnel configuration, status, and traffic statistics on Juniper Networks E-series routers. |
| JUNIPER-IVE-MIB | Defines managed objects for the Juniper Networks Infranet/IVE (Instant Virtual Extranet) SSL VPN gateway, monitoring user sessions and system health. |
| JUNIPER-JS-AUTH-MIB | Provides managed objects for authentication firewall and access control on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-CERT-MIB | Defines managed objects for digital certificate management on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-IPSEC-VPN-MIB | Managed objects covering IPsec VPN configuration, tunnel status, and statistics for Juniper Networks SRX security devices. |
| JUNIPER-JS-POLICY-MIB | Provides managed objects for security policy configuration, hit counts, and rule statistics on Juniper Networks SRX and J-series appliances. |
| JUNIPER-JS-SCREENING-MIB | Defines managed objects for screen (DoS/DDoS attack screening) statistics on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-UTM-AV-MIB | Provides managed objects for Unified Threat Management (UTM) antivirus scanning statistics on Juniper Networks SRX security devices. |
| JUNIPER-MAG-MIB | Provides managed objects for the Juniper Networks Mobility Access Gateway (MAG), monitoring SSL VPN and unified access service statistics. |
| JUNIPER-SECURE-ACCESS-PORT-MIB | Juniper Networks MIB for managing secure access port features including MAC limiting and DHCP snooping on Juniper EX switches. |
| JUNIPER-SRX5000-SPU-MONITORING-MIB IPNM ✓ | Monitors Security Processing Unit (SPU) performance on Juniper SRX5000 series firewalls, including CPU usage, current/max session counts, and IPv4/IPv6 flow session statistics. |
| JUNIPER-VPN-MIB | Juniper Networks MIB for managing Layer 2 and Layer 3 VPN service instances and forwarding tables on Juniper PE routers. |
| KEYING-PRIVATE-MIB | QCI private MIB defining proprietary objects for keying and access control management on QCI network or security equipment. |
| L2TP-MIB IPNM ✓ | Manages Layer Two Tunneling Protocol (L2TP) tunnel and session state, configuration, and statistics, including tunnel endpoint domain grouping. |
| MCAST-VPN-MIB | IETF Layer-3 VPN working group MIB defining SNMP objects for monitoring IP multicast in BGP/MPLS VPN environments per RFC 6513/6514. |
| MIDCOM-MIB IPNM ✓ | Defines managed objects for controlling middlebox devices such as firewalls and NATs via SNMP. |
| MPLS-L3VPN-STD-MIB IPNM ✓ | Manages MPLS/BGP Layer 3 Virtual Private Networks (L3VPNs), including VRF configuration, routing, and associated interface bindings. |
| NAT-MIB IPNM ✓ | Manages Network Address Translator (NAT) devices, covering NAT session bindings, address/port mappings, and per-interface NAT statistics. |
| NATV2-MIB IPNM ✓ | Defines managed objects for monitoring Network Address Translator (NAT) devices, tracking address pool utilization, subscriber mappings, and address realm information. |
| REDCREEK-TRAP-MIB | Defines SNMP trap notifications for VPN tunnel events and security alarms on RedCreek Communications IPSec gateway appliances. |
| UCD-IPFWACC-MIB IPNM ✓ | Defines managed objects for monitoring Linux IP firewall accounting statistics via the Net-SNMP agent. |
| VPN-TC-STD-MIB IPNM ✓ | Defines textual conventions for Virtual Private Network (VPN) management, primarily the VPNId type representing a globally unique VPN identifier. |