HUAWEI-KOMPELLA-MIB

All MIBs › HUAWEI-KOMPELLA-MIB

Organization: Huawei Technologies Co., Ltd.

Last Updated: 2006-05-09

Category: MPLS and Traffic Engineering, Pseudowire, Technology: VPN, VPN and Security, Vendor: Huawei

Description: Huawei Kompella MIB for managing Kompella-mode MPLS L2VPN (VPWS) services using BGP-based signaling as defined by the Kompella draft.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-KOMPELLA-MIB?

HUAWEI-KOMPELLA-MIB manages Kompella-mode MPLS Layer 2 VPN (VPWS) services on Huawei provider-edge routers, using BGP-based signaling as defined by the Kompella draft. It exposes VPN/circuit configuration and status data describing how virtual circuits are signaled and bound between PE routers, placing it in the service configuration and status-monitoring category for MPLS L2VPN. Monitoring it is about service software health: confirming each VPWS circuit's BGP-signaled status is up and that remote VC/label bindings match, which reveals when a customer's L2VPN circuit has failed due to a signaling mismatch or BGP session issue. It directly depends on BGP4-MIB-style signaling concepts and the broader MPLS L2VPN (Kompella draft) standard it implements. It is deployed on Huawei MPLS provider-edge routers offering VPWS-based L2VPN services to enterprise customers. Engineers can download the HUAWEI-KOMPELLA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-KOMPELLA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei MPLS provider-edge (PE) routers

Monitoring Examples

An operator would poll the Kompella VPN connection table to verify each L2VPN circuit's BGP-signaled status and remote VC label binding, detecting when a VPWS circuit has gone down due to a BGP signaling failure or a label mismatch between provider-edge routers.

What Can Be Monitored

Kompella VPN/circuit operational status
BGP signaling state for L2VPN
VC label binding
L2VPN connection configuration

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From HUAWEI-VPLS-EXT-MIB

HWEnableValue
HWL2VpnStateChangeReason
HWL2VpnVcEncapsType

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwL2Vpn	1.3.6.1.4.1.2011.5.25.119
hwL2VpnKompella	1.3.6.1.4.1.2011.5.25.119.2			The HUAWEI-KOMPELLA-MIB contains objects to manage KOMPELLA.
hwKompellaMIBObjects	1.3.6.1.4.1.2011.5.25.119.2.1
hwKompellaVpnTable	1.3.6.1.4.1.2011.5.25.119.2.1.1		not-accessible	This table is the VPN's configuration table. Users can create or delete the VPN by it.
hwKompellaVpnEntry	1.3.6.1.4.1.2011.5.25.119.2.1.1.1		not-accessible	Provides the information of a Vpn entry.
STR hwKompellaVpnName	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.1	DisplayString	not-accessible	The human-readable name of this VPN.
HWL hwKompellaVpnVcType	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.2	HWL2VpnVcEncapsType	read-create	This value indicates the service to be carried.
STR hwKompellaVpnRouteDistinguisher	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.3	DisplayString	read-create	The route distinguisher for this VPN. This value must be exclusive on the whole. If this node hasn't been configured, the entry of hwKompellaCeTable or hwKompellaVcTable can not be created.
HWE hwKompellaVpnCtrlWord	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.4	HWEnableValue	read-create	This value indicates the control word capability.
U32 hwKompellaVpnMtu	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.5	Unsigned32	read-create	This object specifies max transport unit.
ROW hwKompellaVpnRowStatus	1.3.6.1.4.1.2011.5.25.119.2.1.1.1.51	RowStatus	read-create	RowStatus for this Table. Restriction: If delete a VPN, the entries of hwKompellaCeTable and hwKompellaVcTable under this VPN will be deleted too.
hwKompellaVpnTargetTable	1.3.6.1.4.1.2011.5.25.119.2.1.2		not-accessible	This table is the VPN Target's configuration table. Users can create or delete the Vpn target of a VPN by it.
hwKompellaVpnTargetEntry	1.3.6.1.4.1.2011.5.25.119.2.1.2.1		not-accessible	Provides the information of a Vpn target entry.
INT hwKompellaVpnTargetType	1.3.6.1.4.1.2011.5.25.119.2.1.2.1.2	INTEGER	not-accessible	The route target export distribution type.
STR hwKompellaVpnTarget	1.3.6.1.4.1.2011.5.25.119.2.1.2.1.3	DisplayString	not-accessible	The route target distribution policy.
ROW hwKompellaVpnTargetRowStatus	1.3.6.1.4.1.2011.5.25.119.2.1.2.1.51	RowStatus	read-create	RowStatus for this Table. Restriction: The VPN designated by hwKompellaVpnName must be created first. Not support modifying configuration.
hwKompellaCeTable	1.3.6.1.4.1.2011.5.25.119.2.1.3		not-accessible	This table is the CE configuration table. Users can create or delete the CE of a VPN by it.
hwKompellaCeEntry	1.3.6.1.4.1.2011.5.25.119.2.1.3.1		not-accessible	Provides the information of a CE entry.
U32 hwKompellaCeID	1.3.6.1.4.1.2011.5.25.119.2.1.3.1.1	Unsigned32	not-accessible	The unique ID in a VPN identifies a local CE.
STR hwKompellaCeName	1.3.6.1.4.1.2011.5.25.119.2.1.3.1.2	DisplayString	read-create	The human-readable name of this CE.
U32 hwKompellaCeIDRange	1.3.6.1.4.1.2011.5.25.119.2.1.3.1.3	Unsigned32	read-create	The CE ID range available.
U32 hwKompellaCeIDDefaultOffset	1.3.6.1.4.1.2011.5.25.119.2.1.3.1.4	Unsigned32	read-create	Value of default original CE offset, default value is 0.
ROW hwKompellaCeRowStatus	1.3.6.1.4.1.2011.5.25.119.2.1.3.1.51	RowStatus	read-create	RowStatus for this Table. Restriction: The VPN designated by hwKompellaVpnName must be created first. Not support modifying configuration. If delete a CE, the entries of hwKompellaVcTable under this CE will be deleted too.
hwKompellaVcTable	1.3.6.1.4.1.2011.5.25.119.2.1.4		not-accessible	This table is the VC configuration table. Users can create or delete the VC of a VPN by it.
hwKompellaVcEntry	1.3.6.1.4.1.2011.5.25.119.2.1.4.1		not-accessible	Provides the information of a VC entry.
NUM hwKompellaVcIfIndex	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.1	InterfaceIndex	not-accessible	If the vc is represented in the ifTable as an ifIndex, this item holds the ifIndex of the vc in the ifTable, otherwise it MUST be set to zero.
U32 hwKompellaVcRmtCeID	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.2	Unsigned32	not-accessible	This item holds the remote ce id.
U32 hwKompellaVcInboundLabel	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.3	Unsigned32	read-only	This object indicates the inbound label.
U32 hwKompellaVcOutboundLabel	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.4	Unsigned32	read-only	This object indicates the outbound label.
HWE hwKompellaVcCtrlWord	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.5	HWEnableValue	read-create	This value indicates the control word capability.
OCT hwKompellaVcTnlPolicyName	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.6	OCTET STRING	read-create	This object indicates the tunnel policy name used.
INT hwKompellaVcVlanTagMode	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.7	INTEGER	read-create	This object indicates VLAN tag is stripped(raw) , attached(tagged) or invalid(rawTagNotConfiged).
T/F hwKompellaVcSecondary	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.8	TruthValue	read-create	Denotes the VC is the repetition or not.
T/F hwKompellaOAMSync	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.9	TruthValue	read-create	Denotes the AC and PSN are enable or not.
U32 hwKompellaVCForBFDIndex	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.10	Unsigned32	read-only	The index of pw for BFD.
INT hwKompellaVcOperStatus	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.11	INTEGER	read-only	Denotes the vc is operational or not.
U32 hwKompellaVcRerouteDelayTime	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.12	Unsigned32	read-create	The reroute delay time.
U32 hwKompellaVcRerouteResumeTime	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.13	Unsigned32	read-create	the reroute resume time.
INT hwKompellaVcReroutePolicy	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.14	INTEGER	read-only	reroute policy.
HWL hwKompellaVcRerouteReason	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.15	HWL2VpnStateChangeReason	read-only	the reroute reason.
U32 hwKompellaVcLastRerouteTime	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.16	Unsigned32	read-only	last reroute time.
T/F hwKompellaVcManualSetFault	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.17	TruthValue	read-only	Denotes the manual has been set or not.
T/F hwKompellaVcIsActive	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.18	TruthValue	read-only	Denotes the current vc is active or not.
INT hwKompellaACStatus	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.19	INTEGER	read-only	Denotes the AC's physical status is operational or not.
INT hwKompellaACOAMStatus	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.20	INTEGER	read-only	Denotes the AC's protocol is operational or not.
U32 hwKompellaVcBFDDetectMultiplier	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.21	Unsigned32	read-only	The multiple of detection time.
U32 hwKompellaVcBFDMinReceiveInterval	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.22	Unsigned32	read-only	The minimum interval of BFD messages to be received.
U32 hwKompellaVcBFDMinTransmitInterval	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.23	Unsigned32	read-only	The minimum interval of BFD messages to be sent.
T/F hwKompellaVcDynamicBFDDetect	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.24	TruthValue	read-only	This value indicates the capacitability to support dynamic BFD detect.
INT hwKompellaEthOamType	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.25	INTEGER	read-only	This value indicates the type of ETH OAM.
U32 hwKompellaCfmMaIndex	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.26	Unsigned32	read-only	This value indicates the CFM MA Index.
IP hwKompellaVcPeerAddr	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.27	IpAddress	read-only	This object contain the value of the peer node address of the VC/PE maintenance protocol entity.
ROW hwKompellaVcRowStatus	1.3.6.1.4.1.2011.5.25.119.2.1.4.1.51	RowStatus	read-create	RowStatus for this Table. Restriction: The VPN designated by hwKompellaVpnName must be created first. The CE designated by hwKompellaVpnName and hwKompellaCeID must be created first. Not support modifying configuration.
hwKompellaVcTnlTable	1.3.6.1.4.1.2011.5.25.119.2.1.5		not-accessible	This table is used to search the tunnel index of a VC.
hwKompellaVcTnlEntry	1.3.6.1.4.1.2011.5.25.119.2.1.5.1		not-accessible	Provides the information of a VC tunnel entry.
U32 hwKompellaVcTnlIndex	1.3.6.1.4.1.2011.5.25.119.2.1.5.1.1	Unsigned32	not-accessible	This object indicates the tunnel index of a VC.
INT hwKompellaVcTnlType	1.3.6.1.4.1.2011.5.25.119.2.1.5.1.2	INTEGER	read-only	This object indicates the type of the VC tunnel.
U32 hwKompellaTnlForBfdIndex	1.3.6.1.4.1.2011.5.25.119.2.1.5.1.3	Unsigned32	read-only	This object indicates the index of LSP for BFD.
hwKompellaVcStatisticsTable	1.3.6.1.4.1.2011.5.25.119.2.1.6		not-accessible	This table contains the KOMPELLA's VC packets statistics.
hwKompellaVcStatisticsEntry	1.3.6.1.4.1.2011.5.25.119.2.1.6.1		not-accessible	Provides the information of the KOMPELLA's VC packets statistics.
C64 hwKompellaVcStatisticsRcvPkts	1.3.6.1.4.1.2011.5.25.119.2.1.6.1.1	Counter64	read-only	The total number of packets received on this VC.
C64 hwKompellaVcStatisticsRcvBytes	1.3.6.1.4.1.2011.5.25.119.2.1.6.1.2	Counter64	read-only	The total number of bytes received on this VC.
C64 hwKompellaVcStatisticsSndPkts	1.3.6.1.4.1.2011.5.25.119.2.1.6.1.3	Counter64	read-only	The total number of packets sent on this VC.
C64 hwKompellaVcStatisticsSndBytes	1.3.6.1.4.1.2011.5.25.119.2.1.6.1.4	Counter64	read-only	The total number of bytes sent on the VC.
HWE hwKompellaVcUpDownNotifEnable	1.3.6.1.4.1.2011.5.25.119.2.1.7	HWEnableValue	read-write	This object indicates the enable sign of KOMPELLA VC state change notification. The default value is disable (2).
HWE hwKompellaVcDeletedNotifEnable	1.3.6.1.4.1.2011.5.25.119.2.1.8	HWEnableValue	read-write	This object indicates the enable sign of KOMPELLA VC deletion notification. The default value is disable (2).
HWE hwKompellaSwitchNotifEnable	1.3.6.1.4.1.2011.5.25.119.2.1.9	HWEnableValue	read-write	If this object is set to enable(1),then it enbables this emission of hwKompellaSwitchWtoP and hwKompellaSwitchPtoW notifications;otherwise these notifications are not emitted. The default value is disable (2).
HWL hwKompellaVcStateChangeReason	1.3.6.1.4.1.2011.5.25.119.2.1.10	HWL2VpnStateChangeReason	accessible-for-notify	This object indicates the reason of KOMPELLA VC state change.
U32 hwKompellaSwitchRmtCEID	1.3.6.1.4.1.2011.5.25.119.2.1.11	Unsigned32	accessible-for-notify	This object indicates the remote CE ID of KOMPELLA VC switch from working pw to protect pw .
hwKompellaMIBTraps	1.3.6.1.4.1.2011.5.25.119.2.2
NTF hwKompellaVcDown	1.3.6.1.4.1.2011.5.25.119.2.2.1			This notification indicates the VC's state changes to down.
NTF hwKompellaVcUp	1.3.6.1.4.1.2011.5.25.119.2.2.2			This notification indicates the VC's state changes to up.
NTF hwKompellaSwitchWtoP	1.3.6.1.4.1.2011.5.25.119.2.2.3			This notification is generated when switch from working pw to protect pw happens.
NTF hwKompellaSwitchPtoW	1.3.6.1.4.1.2011.5.25.119.2.2.4			This notification is generated when switch from protect pw to working pw happens.
NTF hwKompellaVcDeleted	1.3.6.1.4.1.2011.5.25.119.2.2.5			This notification indicates the VC is deleted.
hwKompellaMIBConformance	1.3.6.1.4.1.2011.5.25.119.2.3
hwKompellaMIBCompliances	1.3.6.1.4.1.2011.5.25.119.2.3.1
hwKompellaMIBCompliance	1.3.6.1.4.1.2011.5.25.119.2.3.1.1			The compliance statement for systems supporting the HUAWEI-KOMPELLA-MIB.
hwKompellaMIBGroups	1.3.6.1.4.1.2011.5.25.119.2.3.2
hwKompellaVpnGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.1			The KOMPELLA's Vpn group.
hwKompellaVpnTargetGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.2			The KOMPELLA's Vpn Target group.
hwKompellaCeGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.3			The KOMPELLA's CE group.
hwKompellaVcGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.4			The KOMPELLA's VC group.
hwKompellaVcTnlGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.5			The KOMPELLA's VC Tunnel group.
hwKompellaVcStatisticsGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.6			The KOMPELLA's VC Statistic group.
hwKompellaNotificationControlGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.7			The KOMPELLA's Notification Control group.
hwKompellaVCSwitchControlGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.8			The KOMPELLA's Switch Notification Control group.
hwKompellaVcStateChangeReasonGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.9			The KOMPELLA's Vc State Change Reason group.
hwKompellaSwitchRmtCEIDGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.10			The KOMPELLA's Remote CE ID group.
hwKompellaNotificationGroup	1.3.6.1.4.1.2011.5.25.119.2.3.2.11			The KOMPELLA Notification group.

RFC description

Huawei KOMPELLA L2VPN MIB for managing KOMPELLA VPN configurations on data center equipment.

Start monitoring Huawei MPLS provider-edge (PE) router (Kompella-mode L2VPN/VPWS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-KOMPELLA-MIB

What Is HUAWEI-KOMPELLA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description