ALTIGA-L2TP-STATS-MIB

All MIBs › ALTIGA-L2TP-STATS-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2002-09-05

Category: VPN and Security, Vendor: Altiga

Description: Altiga (Cisco VPN 3000) L2TP statistics MIB for monitoring L2TP tunnel and session establishment counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALTIGA-L2TP-STATS-MIB?

ALTIGA-L2TP-STATS-MIB is a proprietary MIB from Altiga Networks (Cisco VPN 3000 Series Concentrator) for tracking L2TP tunnel and session statistics on the device acting as an L2TP Access Concentrator or Network Server. It exposes counters for total, active, failed, and maximum tunnels and sessions, alongside vendor name and firmware revision identification fields. This MIB directly supports software/service-status monitoring: active-versus-maximum tunnel and session counts reveal capacity saturation, rising failed-tunnel and failed-authentication counts flag negotiation or credential problems, and the firmware revision object supports software version tracking for inventory and compliance. It relies on IETF L2TP protocol concepts (RFC 2661) for its terminology and is part of the same Altiga enterprise MIB suite as the other ALTIGA-*-STATS modules. It is deployed on Cisco/Altiga VPN 3000 Concentrators terminating L2TP-based remote-access VPN tunnels for mobile or remote workers. Engineers can download the ALTIGA-L2TP-STATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALTIGA-L2TP-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco/Altiga VPN 3000 Series concentrator

Monitoring Examples

An administrator would poll alL2tpStatsActiveTunnels and alL2tpStatsActiveSessions against alL2tpStatsMaxTunnels and alL2tpStatsMaxSessions to detect when the concentrator is approaching its configured capacity limits. A rising alL2tpStatsFailedAuthentications count alongside alL2tpStatsFailedTunnels indicates a wave of failed VPN client logins worth investigating. Checking alL2tpStatsFirmwareRev and alL2tpStatsVendorName lets an admin confirm all concentrators in a fleet are running the expected software version.

What Can Be Monitored

active/total/max L2TP tunnels
active/total/max L2TP sessions
failed tunnel and session counts
failed authentication count
firmware revision and vendor identification

Imported Objects

From ALTIGA-GLOBAL-REG

alL2tpMibModule

OBJECT-IDENTITY

From ALTIGA-MIB

alL2tpGroup	OBJECT-IDENTITY
alStatsL2tp	OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using alL2tpStatsTotalTunnels OID:

Select a Cisco (Altiga) VPN 3000 Series Concentrator (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alL2tpStatsTotalTunnels into the Find box to locate it in the OID tree, then select it and click OK. This object returns the total number of tunnels that have successfully reached the established state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
G32 alL2tpStatsActiveSessions	1.3.6.1.4.1.3076.2.1.2.16.1.11	Gauge32	read-only	This object returns the number of sessions that are currently active.
G32 alL2tpStatsActiveTunnels	1.3.6.1.4.1.3076.2.1.2.16.1.7	Gauge32	read-only	This object returns the number of tunnels that are currently active.
C32 alL2tpStatsControlRecvDiscards	1.3.6.1.4.1.3076.2.1.2.16.1.15	Counter32	read-only	This object returns the number of control packets received that were discarded.
C32 alL2tpStatsControlRecvOctets	1.3.6.1.4.1.3076.2.1.2.16.1.13	Counter32	read-only	This object returns the number of control channel octets received.
C32 alL2tpStatsControlRecvPackets	1.3.6.1.4.1.3076.2.1.2.16.1.14	Counter32	read-only	This object returns the number of control packets received.
C32 alL2tpStatsControlSendOctets	1.3.6.1.4.1.3076.2.1.2.16.1.16	Counter32	read-only	This object returns the number of control channel octets that were transmitted to tunnel endpoints.
C32 alL2tpStatsControlSendPackets	1.3.6.1.4.1.3076.2.1.2.16.1.17	Counter32	read-only	This object returns the number of control packets that were transmitted to tunnel endpoints.
C32 alL2tpStatsFailedAuthentications	1.3.6.1.4.1.3076.2.1.2.16.1.6	Counter32	read-only	This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.
C32 alL2tpStatsFailedSessions	1.3.6.1.4.1.3076.2.1.2.16.1.10	Counter32	read-only	This object returns the number of sessions that failed to reach the established state for this tunnel domain.
C32 alL2tpStatsFailedTunnels	1.3.6.1.4.1.3076.2.1.2.16.1.5	Counter32	read-only	This object returns the number of tunnels that failed to reach the established state.
OCT alL2tpStatsFirmwareRev	1.3.6.1.4.1.3076.2.1.2.16.1.3	OCTET STRING	read-only	This object defines the firmware revision.
OCT alL2tpStatsLocalProtVers	1.3.6.1.4.1.3076.2.1.2.16.1.1	OCTET STRING	read-only	This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
G32 alL2tpStatsMaxSessions	1.3.6.1.4.1.3076.2.1.2.16.1.12	Gauge32	read-only	The maximum number of simultaneously active L2TP sessions since the system was booted.
G32 alL2tpStatsMaxTunnels	1.3.6.1.4.1.3076.2.1.2.16.1.8	Gauge32	read-only	The maximum number of simultaneously active L2TP tunnels since the system was booted.
C32 alL2tpStatsPayloadRecvDiscards	1.3.6.1.4.1.3076.2.1.2.16.1.20	Counter32	read-only	This object returns the number of received payload packets that were discarded.
C32 alL2tpStatsPayloadRecvOctets	1.3.6.1.4.1.3076.2.1.2.16.1.18	Counter32	read-only	This object returns the number of payload channel octets that were received.
C32 alL2tpStatsPayloadRecvPackets	1.3.6.1.4.1.3076.2.1.2.16.1.19	Counter32	read-only	This object returns the number of payload packets that were received.
C32 alL2tpStatsPayloadSendOctets	1.3.6.1.4.1.3076.2.1.2.16.1.21	Counter32	read-only	This object returns the number of payload channel octets that were transmitted to tunnel peers.
C32 alL2tpStatsPayloadSendPackets	1.3.6.1.4.1.3076.2.1.2.16.1.22	Counter32	read-only	This object returns the number of payload packets that were transmitted to tunnel peers.
C32 alL2tpStatsSessionAckTimeouts	1.3.6.1.4.1.3076.2.1.2.16.3.1.34	Counter32	read-only	This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
INT alL2tpStatsSessionAuthMethod	1.3.6.1.4.1.3076.2.1.2.16.3.1.20	INTEGER	read-only	This object contains the proxy authentication method employed by the LAC for the session. If l2tpSessionProxyLcp is false(2) this object should not be interpreted.
INT alL2tpStatsSessionCallBearerType	1.3.6.1.4.1.3076.2.1.2.16.3.1.12	INTEGER	read-only	This object describes the bearer type of this session.
U32 alL2tpStatsSessionCallSerialNumber	1.3.6.1.4.1.3076.2.1.2.16.3.1.9	Unsigned32	read-only	This object contains the serial number that has been assigned to this session.
INT alL2tpStatsSessionCallType	1.3.6.1.4.1.3076.2.1.2.16.3.1.8	INTEGER	read-only	This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
STR alL2tpStatsSessionCLID	1.3.6.1.4.1.3076.2.1.2.16.3.1.16	DisplayString	read-only	This object identifies the Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided then a null string will be returned.
G32 alL2tpStatsSessionCurrentRemoteRWS	1.3.6.1.4.1.3076.2.1.2.16.3.1.36	Gauge32	read-only	This object contains the current remote receive window size as determined by the local flow control mechanism employed.
STR alL2tpStatsSessionDNIS	1.3.6.1.4.1.3076.2.1.2.16.3.1.15	DisplayString	read-only	This object identifies the Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.
alL2tpStatsSessionEntry	1.3.6.1.4.1.3076.2.1.2.16.3.1		not-accessible	An L2TP session interface stats entry.
INT alL2tpStatsSessionFramingType	1.3.6.1.4.1.3076.2.1.2.16.3.1.13	INTEGER	read-only	This object describes the framing type of this session.
NUM alL2tpStatsSessionIfIndex	1.3.6.1.4.1.3076.2.1.2.16.3.1.2	InterfaceIndex	read-only	This value for this object is equal to the value of ifIndex of the Interfaces MIB for session interfaces of type L2TP.
I32 alL2tpStatsSessionLocalCID	1.3.6.1.4.1.3076.2.1.2.16.3.1.4	Integer32	read-only	This object contains the local call identifier for the session.
I32 alL2tpStatsSessionLocalRWS	1.3.6.1.4.1.3076.2.1.2.16.3.1.21	Integer32	read-only	This object returns the local send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
C32 alL2tpStatsSessionOutOfWindow	1.3.6.1.4.1.3076.2.1.2.16.3.1.30	Counter32	read-only	This object returns a count of the number of payload packets that were received outside of the expected window for this session.
C32 alL2tpStatsSessionOutSequence	1.3.6.1.4.1.3076.2.1.2.16.3.1.29	Counter32	read-only	This object returns the total number of packets received for this session which were received out of sequence.
I32 alL2tpStatsSessionPhysChanId	1.3.6.1.4.1.3076.2.1.2.16.3.1.14	Integer32	read-only	This object contains the physical channel identifier for the session.
STR alL2tpStatsSessionPrivateGroupID	1.3.6.1.4.1.3076.2.1.2.16.3.1.18	DisplayString	read-only	This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.
T/F alL2tpStatsSessionProxyLcp	1.3.6.1.4.1.3076.2.1.2.16.3.1.19	TruthValue	read-only	Indicates whether the LAC performed proxy LCP for this session.
C32 alL2tpStatsSessionReassemblyTimeouts	1.3.6.1.4.1.3076.2.1.2.16.3.1.35	Counter32	read-only	This object returns the number of reassembly time outs that have occured for this session.
C32 alL2tpStatsSessionRecvDiscards	1.3.6.1.4.1.3076.2.1.2.16.3.1.27	Counter32	read-only	This object returns the total number of payload packets received that were discarded for this session.
C32 alL2tpStatsSessionRecvOctets	1.3.6.1.4.1.3076.2.1.2.16.3.1.25	Counter32	read-only	This object returns the total number payload octets received for this session.
C32 alL2tpStatsSessionRecvPackets	1.3.6.1.4.1.3076.2.1.2.16.3.1.26	Counter32	read-only	This object returns the total number of payload packets received for this session.
I32 alL2tpStatsSessionRecvSeq	1.3.6.1.4.1.3076.2.1.2.16.3.1.40	Integer32	read-only	This object contains the next receive sequence number expected to be received on this session.
I32 alL2tpStatsSessionRecvSeqAck	1.3.6.1.4.1.3076.2.1.2.16.3.1.41	Integer32	read-only	This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session.
C32 alL2tpStatsSessionRecvSeqResets	1.3.6.1.4.1.3076.2.1.2.16.3.1.42	Counter32	read-only	This object contains the total number of sequence number resets (payload packets with the R-bit set) received on this session.
C32 alL2tpStatsSessionRecvZLB	1.3.6.1.4.1.3076.2.1.2.16.3.1.28	Counter32	read-only	This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
I32 alL2tpStatsSessionRemoteCID	1.3.6.1.4.1.3076.2.1.2.16.3.1.5	Integer32	read-only	This object contains the remote call identifier for the session.
I32 alL2tpStatsSessionRemoteInitialRWS	1.3.6.1.4.1.3076.2.1.2.16.3.1.22	Integer32	read-only	This object returns the initial remote send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
I32 alL2tpStatsSessionRemotePPD	1.3.6.1.4.1.3076.2.1.2.16.3.1.23	Integer32	read-only	This object contains the Packet Processing Delay for the session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
ROW alL2tpStatsSessionRowStatus	1.3.6.1.4.1.3076.2.1.2.16.3.1.1	RowStatus	read-write	The status of this row. Used to terminate the session, cannot be used to create a session.
I32 alL2tpStatsSessionRxConnectSpeed	1.3.6.1.4.1.3076.2.1.2.16.3.1.11	Integer32	read-only	This object returns the last known receive baud rate for this session.
C32 alL2tpStatsSessionSendOctets	1.3.6.1.4.1.3076.2.1.2.16.3.1.31	Counter32	read-only	This object returns the total number of payload octets transmitted for this session.
C32 alL2tpStatsSessionSendPackets	1.3.6.1.4.1.3076.2.1.2.16.3.1.32	Counter32	read-only	This object returns the total number of payload packets transmitted for this session.
I32 alL2tpStatsSessionSendSeq	1.3.6.1.4.1.3076.2.1.2.16.3.1.37	Integer32	read-only	This object contains the next send sequence number for for this session.
I32 alL2tpStatsSessionSendSeqAck	1.3.6.1.4.1.3076.2.1.2.16.3.1.38	Integer32	read-only	This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtracting the alL2tpStatsSessionSendSeq from alL2tpStatsSessionSendSeqAck and comparing this value to l2tpSesssionStatsCurrentRemoteRWS.
C32 alL2tpStatsSessionSendSeqResets	1.3.6.1.4.1.3076.2.1.2.16.3.1.39	Counter32	read-only	This object contains the total number of sequence number resets (payload packets with the R-bit set) sent on this session.
C32 alL2tpStatsSessionSendZLB	1.3.6.1.4.1.3076.2.1.2.16.3.1.33	Counter32	read-only	This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session.
INT alL2tpStatsSessionSequencingState	1.3.6.1.4.1.3076.2.1.2.16.3.1.24	INTEGER	read-only	This object defines which tunnel peers have requested payload sequencing. The value of both(4) indicates that both peers have requested payload sequencing.
INT alL2tpStatsSessionState	1.3.6.1.4.1.3076.2.1.2.16.3.1.7	INTEGER	read-only	This object contains the current state of the session.
STR alL2tpStatsSessionSubAddress	1.3.6.1.4.1.3076.2.1.2.16.3.1.17	DisplayString	read-only	This object identifies the Sub Address that the LAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.
alL2tpStatsSessionTable	1.3.6.1.4.1.3076.2.1.2.16.3		not-accessible	The L2TP session status and statistics table.
I32 alL2tpStatsSessionTID	1.3.6.1.4.1.3076.2.1.2.16.3.1.3	Integer32	read-only	This object contains the control channel tunnel identifier for this session.
IP alL2tpStatsSessionTunnelPeerIpAddr	1.3.6.1.4.1.3076.2.1.2.16.3.1.43	IpAddress	read-only	The peer's IP address for the tunnel to which this session belongs.
I32 alL2tpStatsSessionTxConnectSpeed	1.3.6.1.4.1.3076.2.1.2.16.3.1.10	Integer32	read-only	This object returns the last known transmit baud rate for this session.
STR alL2tpStatsSessionUserName	1.3.6.1.4.1.3076.2.1.2.16.3.1.6	DisplayString	read-only	This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
C32 alL2tpStatsTotalSessions	1.3.6.1.4.1.3076.2.1.2.16.1.9	Counter32	read-only	This object returns the total number of sessions that have successfully reached the established state.
C32 alL2tpStatsTotalTunnelsEx	1.3.6.1.4.1.3076.2.1.2.16.1.4	Counter32	read-only	This object returns the total number of tunnels that have successfully reached the established state.
G32 alL2tpStatsTunnelActiveSessions	1.3.6.1.4.1.3076.2.1.2.16.2.1.29	Gauge32	read-only	This object contains the total number of sessions for this tunnel.
INT alL2tpStatsTunnelBearerCapabilities	1.3.6.1.4.1.3076.2.1.2.16.2.1.12	INTEGER	read-only	This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
C32 alL2tpStatsTunnelControlAckTimeouts	1.3.6.1.4.1.3076.2.1.2.16.2.1.21	Counter32	read-only	This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer.
C32 alL2tpStatsTunnelControlOutOfSequence	1.3.6.1.4.1.3076.2.1.2.16.2.1.17	Counter32	read-only	This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel.
C32 alL2tpStatsTunnelControlOutOfWindow	1.3.6.1.4.1.3076.2.1.2.16.2.1.18	Counter32	read-only	This object contains the number of control packets that were received outside of the offered receive window. It is implementation specific as to whether these packets are queued or discarded.
C32 alL2tpStatsTunnelControlRecvDiscards	1.3.6.1.4.1.3076.2.1.2.16.2.1.15	Counter32	read-only	This object returns the number of received payload packets that were discarded.
C32 alL2tpStatsTunnelControlRecvPackets	1.3.6.1.4.1.3076.2.1.2.16.2.1.14	Counter32	read-only	This object contains the number of control packets received on the tunnel.
C32 alL2tpStatsTunnelControlRecvZLB	1.3.6.1.4.1.3076.2.1.2.16.2.1.16	Counter32	read-only	This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received.
C32 alL2tpStatsTunnelControlSendPackets	1.3.6.1.4.1.3076.2.1.2.16.2.1.19	Counter32	read-only	This object contains the number of control packets that were transmitted to the tunnel peer.
C32 alL2tpStatsTunnelControlSendZLB	1.3.6.1.4.1.3076.2.1.2.16.2.1.20	Counter32	read-only	This object contains the number of Zero Length Body control packets that were transmitted to the tunnel peer.
G32 alL2tpStatsTunnelCurrentRemoteRWS	1.3.6.1.4.1.3076.2.1.2.16.2.1.22	Gauge32	read-only	This object contains the current remote receive window size as determined by the local flow control mechanism employed.
alL2tpStatsTunnelEntry	1.3.6.1.4.1.3076.2.1.2.16.2.1		not-accessible	An entry in the alL2tpStatsTunnelTable.
C32 alL2tpStatsTunnelFailedSessions	1.3.6.1.4.1.3076.2.1.2.16.2.1.28	Counter32	read-only	This object contains the total number of sessions that were initiated but failed to reach the established phase.
INT alL2tpStatsTunnelFramingCapabilities	1.3.6.1.4.1.3076.2.1.2.16.2.1.13	INTEGER	read-only	This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
I32 alL2tpStatsTunnelInitialRemoteRWS	1.3.6.1.4.1.3076.2.1.2.16.2.1.11	Integer32	read-only	This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If the tunnel is idle this object should maintain its value from the last time it was connected.
INT alL2tpStatsTunnelInitiated	1.3.6.1.4.1.3076.2.1.2.16.2.1.6	INTEGER	read-only	This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.
I32 alL2tpStatsTunnelLastErrorCode	1.3.6.1.4.1.3076.2.1.2.16.2.1.31	Integer32	read-only	This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
STR alL2tpStatsTunnelLastErrorMessage	1.3.6.1.4.1.3076.2.1.2.16.2.1.32	DisplayString	read-only	This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
I32 alL2tpStatsTunnelLastResultCode	1.3.6.1.4.1.3076.2.1.2.16.2.1.30	Integer32	read-only	This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
I32 alL2tpStatsTunnelLocalTID	1.3.6.1.4.1.3076.2.1.2.16.2.1.3	Integer32	read-only	This object contains the local tunnel Identifier.
IP alL2tpStatsTunnelPeerIpAddr	1.3.6.1.4.1.3076.2.1.2.16.2.1.2	IpAddress	read-only	The peer's IP address for this tunnel.
I32 alL2tpStatsTunnelRecvSeq	1.3.6.1.4.1.3076.2.1.2.16.2.1.25	Integer32	read-only	This object contains the next receive sequence number expected to be received on this control channel.
I32 alL2tpStatsTunnelRecvSeqAck	1.3.6.1.4.1.3076.2.1.2.16.2.1.26	Integer32	read-only	This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel.
OCT alL2tpStatsTunnelRemoteFirmwareRevision	1.3.6.1.4.1.3076.2.1.2.16.2.1.9	OCTET STRING	read-only	This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.
STR alL2tpStatsTunnelRemoteHostName	1.3.6.1.4.1.3076.2.1.2.16.2.1.7	DisplayString	read-only	This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
OCT alL2tpStatsTunnelRemoteProtocolVersion	1.3.6.1.4.1.3076.2.1.2.16.2.1.10	OCTET STRING	read-only	This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
I32 alL2tpStatsTunnelRemoteTID	1.3.6.1.4.1.3076.2.1.2.16.2.1.4	Integer32	read-only	This object contains the remote tunnel Identifier.
STR alL2tpStatsTunnelRemoteVendorName	1.3.6.1.4.1.3076.2.1.2.16.2.1.8	DisplayString	read-only	This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was connected.
ROW alL2tpStatsTunnelRowStatus	1.3.6.1.4.1.3076.2.1.2.16.2.1.1	RowStatus	read-write	The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel.
I32 alL2tpStatsTunnelSendSeq	1.3.6.1.4.1.3076.2.1.2.16.2.1.23	Integer32	read-only	This object contains the next send sequence number for the control channel.
I32 alL2tpStatsTunnelSendSeqAck	1.3.6.1.4.1.3076.2.1.2.16.2.1.24	Integer32	read-only	This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtracting the l2tpTunnelStatsSendSeq from alL2tpStatsTunnelSendSeqAck and comparing this value to l2tpTunnelStatsCurrentRemoteRWS.
INT alL2tpStatsTunnelState	1.3.6.1.4.1.3076.2.1.2.16.2.1.5	INTEGER	read-only	This field contains the current state of the control tunnel.
alL2tpStatsTunnelTable	1.3.6.1.4.1.3076.2.1.2.16.2		not-accessible	The L2TP tunnel status and statistics table.
C32 alL2tpStatsTunnelTotalSessions	1.3.6.1.4.1.3076.2.1.2.16.2.1.27	Counter32	read-only	This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
STR alL2tpStatsVendorName	1.3.6.1.4.1.3076.2.1.2.16.1.2	DisplayString	read-only	This object identifies the Vendor name.
alStatsL2tpGlobal	1.3.6.1.4.1.3076.2.1.2.16.1
altigaL2tpStatsDepGroup	1.3.6.1.4.1.3076.2.1.1.1.16.3			The deprecated objects for L2TP statistics.
altigaL2tpStatsGroup	1.3.6.1.4.1.3076.2.1.1.1.16.2			The objects for L2TP statistics.
altigaL2tpStatsMibCompliance	1.3.6.1.4.1.3076.1.1.21.2.1.1.1			The compliance statement for agents which implement the Altiga L2TP Statistics MIB.
altigaL2tpStatsMibCompliances	1.3.6.1.4.1.3076.1.1.21.2.1.1
altigaL2tpStatsMibConformance	1.3.6.1.4.1.3076.1.1.21.2.1
altigaL2tpStatsMibModule	1.3.6.1.4.1.3076.1.1.21.2			The Altiga L2TP Statistics MIB models counters and objects that are of management interest for L2TP tunnels. Acronyms The following acronyms are used in this document: AVP: Attribute/Value Pair CLID: Calling Line ID DNIS: Dialed Number Identification Service L2TP: Layer 2 Tunnel Protocol LAC: L2TP Access Concentrator LNS: L2TP Network Server MIB: Management Information Base RWS: Receive Window Size

RFC description

Cisco Altiga L2TP Statistics MIB modeling Layer 2 Tunnel Protocol counters and tunnel session management objects.

Start monitoring Cisco (Altiga) VPN 3000 Series Concentrators (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALTIGA-L2TP-STATS-MIB