BIANCA-BRICK-PPTP-MIB

All MIBs › BIANCA-BRICK-PPTP-MIB

Category: MPLS and Traffic Engineering, VPN and Security, Vendor: bintec

Description: Monitors and configures PPTP VPN tunnel sessions on bintec elmeg BIANCA/BRICK routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-PPTP-MIB?

BIANCA-BRICK-PPTP-MIB is a proprietary bintec elmeg (BIANCA/BRICK) MIB for monitoring and configuring PPTP VPN tunnel sessions on the router. It is expected to expose a PPTP session/tunnel table with per-session state, connected peer address, and session statistics, along with configuration objects for the PPTP server/client. Its monitoring value is VPN session software status: how many PPTP sessions are active, their connection state, and duration, useful for confirming remote-access VPN availability and detecting dropped sessions. It complements the general concepts found in standard PPP-related MIBs, since PPTP tunnels carry PPP sessions. It is used on bintec elmeg BIANCA/BRICK routers providing PPTP-based remote-access VPN connectivity for remote or mobile users, and network administrators typically complete a BIANCA-BRICK-PPTP-MIB download to load its definitions into their SNMP management tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-PPTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg BIANCA/BRICK router

Monitoring Examples

No sample objects were extracted for this module in the available data. Conceptually, an admin would poll the PPTP session table for active tunnel count and each session's connection state and peer address; a sudden drop in active sessions or repeated establishment failures reveals a PPTP service or authentication problem preventing remote users from connecting.

What Can Be Monitored

active PPTP session count
PPTP session connection state
peer/remote address per session
session duration/statistics

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bibo	1.3.6.1.4.1.272.4
bintec	1.3.6.1.4.1.272
dod	1.3.6
enterprises	1.3.6.1.4.1
internet	1.3.6.1
org	1.3
TIK pptpCallAge	1.3.6.1.4.1.272.4.23.3.1.3	TimeTicks	read-only	The age of the call. For outgoing calls, the time since the call began, or for incoming calls, the time since the call was received. The format is in hh:mm:ss.00.
INT pptpCallDirection	1.3.6.1.4.1.272.4.23.3.1.2	INTEGER	read-only	Direction of the PPTP call, incoming(1) or outgoing(2).
pptpCallEntry	1.3.6.1.4.1.272.4.23.3.1		not-accessible
STR pptpCallInfo	1.3.6.1.4.1.272.4.23.3.1.13	DisplayString	read-only	Additional information to identify the PPTP call
IP pptpCallLocalIpAddress	1.3.6.1.4.1.272.4.23.3.1.6	IpAddress	read-only	The calling (for outgoing calls) or called IP address (for incoming calls).
CTR pptpCallReceivedErrors	1.3.6.1.4.1.272.4.23.3.1.9	Counter	read-only	Count of received invalid GRE-encapsulated packets.
CTR pptpCallReceivedOctets	1.3.6.1.4.1.272.4.23.3.1.8	Counter	read-only	Count of received valid Octets.
CTR pptpCallReceivedPackets	1.3.6.1.4.1.272.4.23.3.1.7	Counter	read-only	Count of received valid GRE-encapsulated packets.
IP pptpCallRemoteIpAddress	1.3.6.1.4.1.272.4.23.3.1.5	IpAddress	read-only	The called (for outgoing calls) or calling IP address (for incoming calls).
INT pptpCallState	1.3.6.1.4.1.272.4.23.3.1.4	INTEGER	read-write	The state of the PPTP call according RFC 2637.
pptpCallTable	1.3.6.1.4.1.272.4.23.3		not-accessible	The pptpCallTable displays all currently active PPTP calls (incoming and outgoing). Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing call is made or when an incoming call is connected. Deleting entries: Entries are removed once the respective call is disconnected.
CTR pptpCallTransmitErrors	1.3.6.1.4.1.272.4.23.3.1.12	Counter	read-only	Count of transmit errors.
CTR pptpCallTransmitOctets	1.3.6.1.4.1.272.4.23.3.1.11	Counter	read-only	Count of transmitted Octets.
CTR pptpCallTransmitPackets	1.3.6.1.4.1.272.4.23.3.1.10	Counter	read-only	Count of transmitted GRE-encapsulated packets.
INT pptpCallType	1.3.6.1.4.1.272.4.23.3.1.1	INTEGER	read-only	The PPTP call type.
INT pptpCreditsCurrentInCon	1.3.6.1.4.1.272.4.23.4.1.9	INTEGER	read-only	Current number of incoming connections.
INT pptpCreditsCurrentOutCon	1.3.6.1.4.1.272.4.23.4.1.10	INTEGER	read-only	Current number of outgoing connections.
pptpCreditsEntry	1.3.6.1.4.1.272.4.23.4.1		not-accessible
INT pptpCreditsMaxCurrentCon	1.3.6.1.4.1.272.4.23.4.1.18	INTEGER	read-write	Maximum number of currently allowed connections in both directions. -1 disables this limit.
INT pptpCreditsMaxCurrentInCon	1.3.6.1.4.1.272.4.23.4.1.16	INTEGER	read-write	Maximum number of currently allowed incoming connections. -1 disables this limit.
INT pptpCreditsMaxCurrentOutCon	1.3.6.1.4.1.272.4.23.4.1.17	INTEGER	read-write	Maximum number of currently allowed outgoing connections. -1 disables this limit.
INT pptpCreditsMaxInCon	1.3.6.1.4.1.272.4.23.4.1.4	INTEGER	read-write	Maximum number of allowed incoming connections during the observation interval. -1 disables this limit.
INT pptpCreditsMaxInDuration	1.3.6.1.4.1.272.4.23.4.1.6	INTEGER	read-write	Maximum connect time for incoming connections in seconds during the observation interval. -1 disables this limit.
INT pptpCreditsMaxOutCon	1.3.6.1.4.1.272.4.23.4.1.5	INTEGER	read-write	Maximum number of allowed outgoing connections during the observation interval. -1 disables this limit.
INT pptpCreditsMaxOutDuration	1.3.6.1.4.1.272.4.23.4.1.7	INTEGER	read-write	Maximum connect time for outgoing connections in seconds during the observation interval. -1 disables this limit
INT pptpCreditsMeasuretime	1.3.6.1.4.1.272.4.23.4.1.3	INTEGER	read-write	Time of one observation interval in seconds.
INT pptpCreditsSubsysNumber	1.3.6.1.4.1.272.4.23.4.1.1	INTEGER	read-only	Type of Subsystem.
INT pptpCreditsSurveillance	1.3.6.1.4.1.272.4.23.4.1.2	INTEGER	read-write	Surveillance on or off.
pptpCreditsTable	1.3.6.1.4.1.272.4.23.4		not-accessible	The pptpCreditsTable contains informations about current used resources and maximum allowed resources for each during a specified interval subsystem. Creating entries: Entries are added by the system during startup. Deleting entries: Is not possible.
INT pptpCreditsTimeleft	1.3.6.1.4.1.272.4.23.4.1.8	INTEGER	read-write	Time in seconds left in current interval. Writing to Timeleft will restart the observation interval.
INT pptpCreditsTotalInCon	1.3.6.1.4.1.272.4.23.4.1.11	INTEGER	read-only	Total count of incoming connections during the observation interval.
INT pptpCreditsTotalInDuration	1.3.6.1.4.1.272.4.23.4.1.14	INTEGER	read-only	Total connect time of incoming connections during the observation interval.
INT pptpCreditsTotalMaxCon	1.3.6.1.4.1.272.4.23.4.1.13	INTEGER	read-only	Maximum number of simultaniously established connections during the observation interval.
INT pptpCreditsTotalOutCon	1.3.6.1.4.1.272.4.23.4.1.12	INTEGER	read-only	Total count of outgoing connections during the observation interval.
INT pptpCreditsTotalOutDuration	1.3.6.1.4.1.272.4.23.4.1.15	INTEGER	read-only	Total connect time of outgoing connections during the observation interval.
TIK pptpCtlConnAge	1.3.6.1.4.1.272.4.23.2.1.2	TimeTicks	read-only	The age of the PPTP control connection. The format is in hh:mm:ss.00.
pptpCtlConnEntry	1.3.6.1.4.1.272.4.23.2.1		not-accessible
INT pptpCtlConnFirmRev	1.3.6.1.4.1.272.4.23.2.1.9	INTEGER	read-only	This variable contains the firmware revision number of the issuing PAC or PNS.
STR pptpCtlConnHost	1.3.6.1.4.1.272.4.23.2.1.7	DisplayString	read-only	DNS name of the issuing PAC or PNS.
IP pptpCtlConnLocalIpAddress	1.3.6.1.4.1.272.4.23.2.1.5	IpAddress	read-only	The IP address of the local PPTP tunnel endpoint.
INT pptpCtlConnOriginator	1.3.6.1.4.1.272.4.23.2.1.1	INTEGER	read-only	The originator of the PPTP control connection.
IP pptpCtlConnRemoteIpAddress	1.3.6.1.4.1.272.4.23.2.1.4	IpAddress	read-only	The IP address of the remote PPTP tunnel endpoint.
INT pptpCtlConnState	1.3.6.1.4.1.272.4.23.2.1.3	INTEGER	read-write	The state of the PPTP control connection according RFC 2637.
pptpCtlConnTable	1.3.6.1.4.1.272.4.23.2		not-accessible	The pptpCtlConnTable displays all currently active PPTP dontrol connections Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing or incoming TCP connection (port 1723) is established. Deleting entries: Entries are removed once the respective PPTP control connection is disconnected.
STR pptpCtlConnVendor	1.3.6.1.4.1.272.4.23.2.1.8	DisplayString	read-only	Vendor specific string describing the type of PAC or PNS being used on remote side.
INT pptpCtlConnVersion	1.3.6.1.4.1.272.4.23.2.1.6	INTEGER	read-only	This variable contains the negotiated PPTP version.
pptpProfileEntry	1.3.6.1.4.1.272.4.23.1.1		not-accessible
INT pptpProfileId	1.3.6.1.4.1.272.4.23.1.1.1	INTEGER	read-write	The profile ID of the PPTP profile.
INT pptpProfileKeepalive	1.3.6.1.4.1.272.4.23.1.1.2	INTEGER	read-write	When set to on(1), PPTP echo requests as described in RFC 2637 are sent in regular intervals during the connection. If set to off(2), no PPTP echo requests will be performed, delete(3) determines the entry is marked for discard.
INT pptpProfileMaxAckTimeout	1.3.6.1.4.1.272.4.23.1.1.5	INTEGER	read-write	Maximum value the adaptive Acknowledgment Timeout (in msec) can reach while it is calculated. According to RFC 2637.
INT pptpProfileMaxBlockTime	1.3.6.1.4.1.272.4.23.1.1.4	INTEGER	read-write	Maximum time (in msec) the GRE Send Window is blocked. If the GRE Send Window is full, no packets can be forwarded and the Maximum Time is passed, the GRE Send Window is resetted to prevent unsolvable situations.
INT pptpProfileMaxRequests	1.3.6.1.4.1.272.4.23.1.1.3	INTEGER	read-write	The maximum number of outstanding PPTP echo replies, until the PPTP control connection is droped and all associated calls are terminated.
INT pptpProfileReassemblyTimeout	1.3.6.1.4.1.272.4.23.1.1.6	INTEGER	read-write	Maximum time (in msec) for rearranging out-of-sequence packets. After this time outstanding packets will be supposed missing.
pptpProfileTable	1.3.6.1.4.1.272.4.23.1		not-accessible	The pptpProfileTable contains parameters for the Point-to-Point Tunneling Protocol (PPTP) according RFC 2637. Entries are removed by setting an entry's pptpProfileKeepalive object to 'delete'.
private	1.3.6.1.4
vpn	1.3.6.1.4.1.272.4.23

RFC description

Point-to-Point Tunneling Protocol (PPTP) configuration for BinTec Bianca Brick VPN devices.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-PPTP-MIB

What Is BIANCA-BRICK-PPTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description