All MIBs › ASCEND-MIBXAUTH-MIB
Category: VPN and Security, Vendor: Ascend/Lucent
Description: Manages extended authentication (XAuth) parameters for IPSec VPN on Ascend access equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ASCEND-MIBXAUTH-MIB?
This is a proprietary Ascend Communications MIB managing extended authentication (XAuth) parameters for IPSec VPN on Ascend access equipment. It exposes configuration objects controlling how remote VPN clients are challenged for username/password credentials as part of IKE Phase 1.5 authentication. This is primarily a security/software-configuration MIB; its monitoring value lies in confirming XAuth is correctly enabled/configured and correlating authentication failures with VPN connectivity problems, rather than exposing hardware counters. It builds on the underlying IPSec/IKE mechanisms Ascend implemented in its VPN gateway software, complementing rather than depending on any single standard MIB. It is deployed on Ascend VPN gateway/access equipment terminating remote-access IPSec VPN tunnels for enterprise remote workers. Engineers can download the ASCEND-MIBXAUTH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBXAUTH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ascend VPN gateway/access equipment
Monitoring Examples
No sample objects were captured for this module, but an XAuth MIB of this kind would typically expose configuration objects (an ascendXAuth* naming pattern) enabling/disabling extended authentication per VPN policy. An administrator would check this setting when remote users report being unable to connect, confirming whether XAuth is required and correctly configured against the expected authentication server.
What Can Be Monitored
- XAuth enabled/disabled status
- extended authentication configuration
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT externalAuthProfile_AcctType | 1.3.6.1.4.1.529.23.142.1.1.3 | INTEGER | read-write | The type of accounting to perform. |
| INT externalAuthProfile_Action_o | 1.3.6.1.4.1.529.23.142.1.1.97 | INTEGER | read-write | |
| INT externalAuthProfile_AuthType | 1.3.6.1.4.1.529.23.142.1.1.2 | INTEGER | read-write | The type of authentication to perform. |
| STR externalAuthProfile_Clid | 1.3.6.1.4.1.529.23.142.1.1.95 | DisplayString | read-write | Authenticate CLID using this password. |
| INT externalAuthProfile_CliUserAuth | 1.3.6.1.4.1.529.23.142.1.1.100 | INTEGER | read-write | Authenticate the user Locally or Externally in the sequence specified by this filed. |
| STR externalAuthProfile_Dnis | 1.3.6.1.4.1.529.23.142.1.1.96 | DisplayString | read-write | Authenticate DNIS using this password. |
| INT externalAuthProfile_Index_o | 1.3.6.1.4.1.529.23.142.1.1.1 | INTEGER | read-only | |
| INT externalAuthProfile_LocalProfilesFirst | 1.3.6.1.4.1.529.23.142.1.1.93 | INTEGER | read-write | Authenticate using local profiles first. |
| INT externalAuthProfile_Noattr6UseTermsrv | 1.3.6.1.4.1.529.23.142.1.1.94 | INTEGER | read-write | Using terminal server if attribute 6 is missing from RADIUS authentication. |
| STR externalAuthProfile_PasswordProfile_Banner | 1.3.6.1.4.1.529.23.142.1.1.84 | DisplayString | read-write | This is the password for the Banner pseudo user. |
| STR externalAuthProfile_PasswordProfile_Clid | 1.3.6.1.4.1.529.23.142.1.1.82 | DisplayString | read-write | This is the password for the CLID pseudo user. |
| STR externalAuthProfile_PasswordProfile_Dialout | 1.3.6.1.4.1.529.23.142.1.1.88 | DisplayString | read-write | This is the password for the Dialout pseudo user. |
| STR externalAuthProfile_PasswordProfile_DialoutAtalkRoutes | 1.3.6.1.4.1.529.23.142.1.1.91 | DisplayString | read-write | This is the password for the Dialout Appletalk pseudo user. |
| STR externalAuthProfile_PasswordProfile_DialoutIpxRoutes | 1.3.6.1.4.1.529.23.142.1.1.90 | DisplayString | read-write | This is the password for the Dialout IPX pseudo user. |
| STR externalAuthProfile_PasswordProfile_DialoutRoutes | 1.3.6.1.4.1.529.23.142.1.1.89 | DisplayString | read-write | This is the password for the Dialout Routes pseudo user. |
| STR externalAuthProfile_PasswordProfile_Dnis | 1.3.6.1.4.1.529.23.142.1.1.83 | DisplayString | read-write | This is the password for the DNIS pseudo user. |
| STR externalAuthProfile_PasswordProfile_Frdl | 1.3.6.1.4.1.529.23.142.1.1.87 | DisplayString | read-write | This is the password for the Frame Relay pseudo user. |
| STR externalAuthProfile_PasswordProfile_InitBanner | 1.3.6.1.4.1.529.23.142.1.1.85 | DisplayString | read-write | Authenticate DNIS using this password. |
| STR externalAuthProfile_PasswordProfile_Pool | 1.3.6.1.4.1.529.23.142.1.1.86 | DisplayString | read-write | This is the password for the POOLs pseudo user. |
| STR externalAuthProfile_PasswordProfile_SourceAuth | 1.3.6.1.4.1.529.23.142.1.1.92 | DisplayString | read-write | This is the password for the Source Auth pseudo user. |
| INT externalAuthProfile_RadAcctClient_AcctCheckpoint | 1.3.6.1.4.1.529.23.142.1.1.42 | INTEGER | read-write | Interval at which to send checkpoint packets to the daemon in minutes. |
| INT externalAuthProfile_RadAcctClient_AcctCheckpointTimer | 1.3.6.1.4.1.529.23.142.1.1.43 | INTEGER | read-write | Sets the scope of the checkpoint timer to individual sessions or all-sessions. |
| INT externalAuthProfile_RadAcctClient_AcctDropStopOnAuthFail | 1.3.6.1.4.1.529.23.142.1.1.46 | INTEGER | read-write | If Yes, do not send RADIUS Accounting Stop/Checkpoint packets for users that failed authentication. |
| STR externalAuthProfile_RadAcctClient_AcctHost1 | 1.3.6.1.4.1.529.23.142.1.1.107 | DisplayString | read-write | The IP address/hostname of the first RADIUS accounting server. |
| STR externalAuthProfile_RadAcctClient_AcctHost2 | 1.3.6.1.4.1.529.23.142.1.1.108 | DisplayString | read-write | The IP address/hostname of the second RADIUS accounting server. |
| STR externalAuthProfile_RadAcctClient_AcctHost3 | 1.3.6.1.4.1.529.23.142.1.1.109 | DisplayString | read-write | The IP address/hostname of the third RADIUS accounting server. |
| INT externalAuthProfile_RadAcctClient_AcctIdBase | 1.3.6.1.4.1.529.23.142.1.1.40 | INTEGER | read-write | The base value to use in reporting Account ID. |
| STR externalAuthProfile_RadAcctClient_AcctKey | 1.3.6.1.4.1.529.23.142.1.1.37 | DisplayString | read-write | The RADIUS accounting access key shared with the RADIUS server. |
| INT externalAuthProfile_RadAcctClient_AcctLimitRetry | 1.3.6.1.4.1.529.23.142.1.1.45 | INTEGER | read-write | Number of retries before removing RADIUS Acct packet. 0 means leave on retry list until maximum retry entries are exceeded. |
| INT externalAuthProfile_RadAcctClient_AcctOnSwitchover | 1.3.6.1.4.1.529.23.142.1.1.111 | INTEGER | read-write | Determines whether Accounting-on packet with event Ascend-Controller-Switchover should be sent or not during switchover when syncing is enabled. |
| INT externalAuthProfile_RadAcctClient_AcctPort | 1.3.6.1.4.1.529.23.142.1.1.35 | INTEGER | read-write | The UDP destination port to use for RADIUS accounting. |
| INT externalAuthProfile_RadAcctClient_AcctRadiusCompat | 1.3.6.1.4.1.529.23.142.1.1.47 | INTEGER | read-write | Accounting RADIUS compatibility mode. |
| INT externalAuthProfile_RadAcctClient_AcctResetTime | 1.3.6.1.4.1.529.23.142.1.1.41 | INTEGER | read-write | The elapsed time to reset to the primary server, after failing to reach the primary server. |
| INT externalAuthProfile_RadAcctClient_AcctSessInterval | 1.3.6.1.4.1.529.23.142.1.1.39 | INTEGER | read-write | Send the number-of-sessions-per-Class Attribute to the accounting server every acct-sess-interval seconds. |
| INT externalAuthProfile_RadAcctClient_AcctSrcPort | 1.3.6.1.4.1.529.23.142.1.1.36 | INTEGER | read-write | The UDP source port to use for RADIUS accounting. If zero, the source port is selected from the non-privileged port range (1024-2000). |
| INT externalAuthProfile_RadAcctClient_AcctStopOnly | 1.3.6.1.4.1.529.23.142.1.1.44 | INTEGER | read-write | Send to RADIUS Accounting Stop packets that have username=0. These are caused by connections that are dropped before authentication is done. |
| INT externalAuthProfile_RadAcctClient_AcctTimeout | 1.3.6.1.4.1.529.23.142.1.1.38 | INTEGER | read-write | Number of seconds to wait for a response to previous accounting request. |
| INT externalAuthProfile_RadAcctClient_TunnelAccounting | 1.3.6.1.4.1.529.23.142.1.1.48 | INTEGER | read-write | Perform RFC2867 Radius Tunnel Accounting ( L2F, L2TP ). |
| INT externalAuthProfile_RadAcctClient_VoipAccounting | 1.3.6.1.4.1.529.23.142.1.1.110 | INTEGER | read-write | To Enable/Disable radius accounting for VOIP calls. |
| INT externalAuthProfile_RadAuthClient_AllowAuthConfigRqsts | 1.3.6.1.4.1.529.23.142.1.1.29 | INTEGER | read-write | Set Yes to send External Config Requests. Default is set to Yes. |
| INT externalAuthProfile_RadAuthClient_AllowNasPortTypeInCliUserAuth | 1.3.6.1.4.1.529.23.142.1.1.103 | INTEGER | read-write | When set to 'NO', NAS_Port_Type attribute is NOT sent in the RADIUS authentication request packet while authenticating CLI users. Default is set to Yes. |
| INT externalAuthProfile_RadAuthClient_AllowUnencryptedTunnelPassword | 1.3.6.1.4.1.529.23.142.1.1.101 | INTEGER | read-write | When set to 'YES', unencrypted as well as encrypted Tunnel-Password, from RADIUS, is accepted. When set to 'NO' only encrypted Tunnel-Password, from RADIUS, is accepted. But as per RFC 2868 the Tunnel-Password MUST be encrypted by RADIUS before sending out. |
| IP externalAuthProfile_RadAuthClient_AuthBootHost | 1.3.6.1.4.1.529.23.142.1.1.20 | IpAddress | read-write | The IP address of the authentication boot host. |
| IP externalAuthProfile_RadAuthClient_AuthBootHost2 | 1.3.6.1.4.1.529.23.142.1.1.21 | IpAddress | read-write | The IP address of the secondary authentication boot host. |
| INT externalAuthProfile_RadAuthClient_AuthBootPort | 1.3.6.1.4.1.529.23.142.1.1.22 | INTEGER | read-write | The UDP port to use for RADIUS authentication. |
| STR externalAuthProfile_RadAuthClient_AuthCliUserDnis | 1.3.6.1.4.1.529.23.142.1.1.102 | DisplayString | read-write | Pseudo DNIS number for CLI users. If set, this number is sent to RADIUS as DNIS. If not set, DNIS is not sent to RADIUS. |
| INT externalAuthProfile_RadAuthClient_AuthFrmAdrStart | 1.3.6.1.4.1.529.23.142.1.1.19 | INTEGER | read-write | Set Yes to send a second Radius accounting start record when the Framed-Address is assigned. Default No for backward compatibility. |
| STR externalAuthProfile_RadAuthClient_AuthHost1 | 1.3.6.1.4.1.529.23.142.1.1.104 | DisplayString | read-write | The IP address/hostname of the first RADIUS authentication server |
| STR externalAuthProfile_RadAuthClient_AuthHost2 | 1.3.6.1.4.1.529.23.142.1.1.105 | DisplayString | read-write | The IP address/hostname of the second RADIUS authentication server |
| STR externalAuthProfile_RadAuthClient_AuthHost3 | 1.3.6.1.4.1.529.23.142.1.1.106 | DisplayString | read-write | The IP address/hostname of the third RADIUS authentication server |
| INT externalAuthProfile_RadAuthClient_AuthIdFailReturnBusy | 1.3.6.1.4.1.529.23.142.1.1.14 | INTEGER | read-write | Return busy instead of normal call clearing when id authentication fails. |
| INT externalAuthProfile_RadAuthClient_AuthIdMaxRetryTime | 1.3.6.1.4.1.529.23.142.1.1.24 | INTEGER | read-write | Maximum time limit to spend retrying RADIUS servers when in id authentication, a value of 0 sets the limit to the internal default value. |
| INT externalAuthProfile_RadAuthClient_AuthIdTimeoutReturnBusy | 1.3.6.1.4.1.529.23.142.1.1.15 | INTEGER | read-write | Return busy instead of normal call clearing when external id authentication fails. |
| INT externalAuthProfile_RadAuthClient_AuthKeepUserName | 1.3.6.1.4.1.529.23.142.1.1.26 | INTEGER | read-write | Action if the Access-Accept packet from Radius server contains a User-Name attribute. |
| STR externalAuthProfile_RadAuthClient_AuthKey | 1.3.6.1.4.1.529.23.142.1.1.10 | DisplayString | read-write | The RADIUS authentication access key shared with the RADIUS server. |
| INT externalAuthProfile_RadAuthClient_AuthNetworkRouteServer | 1.3.6.1.4.1.529.23.142.1.1.98 | INTEGER | read-write | Determines whether Radius server supports multiple profiles with the same user-name. Otherwise destination IP address is appended to user-name. |
| INT externalAuthProfile_RadAuthClient_AuthPool | 1.3.6.1.4.1.529.23.142.1.1.11 | INTEGER | read-write | If TRUE an IP address is allocated from the default pool and passed to the RADIUS server during RADIUS authentication. This address may be assigned to the dial-in user for the duration of the connection. |
| INT externalAuthProfile_RadAuthClient_AuthPort | 1.3.6.1.4.1.529.23.142.1.1.8 | INTEGER | read-write | The UDP destination port to use for RADIUS authentication. |
| INT externalAuthProfile_RadAuthClient_AuthRadiusCompat | 1.3.6.1.4.1.529.23.142.1.1.25 | INTEGER | read-write | Authentication RADIUS compatibility mode. |
| STR externalAuthProfile_RadAuthClient_AuthRealmDelimiters | 1.3.6.1.4.1.529.23.142.1.1.27 | DisplayString | read-write | Characters that delimit a realm and user name (used only if auth-keep-user-name=keep-realm-name or radius-delim_count>0) |
| INT externalAuthProfile_RadAuthClient_AuthReqDelimCount | 1.3.6.1.4.1.529.23.142.1.1.30 | INTEGER | read-write | Number of delimiters to strip from a username in Radius Auth request. |
| INT externalAuthProfile_RadAuthClient_AuthReqStripSide | 1.3.6.1.4.1.529.23.142.1.1.31 | INTEGER | read-write | Side to strip chars from a username in a Radius Auth request if delim-count is > 0. |
| INT externalAuthProfile_RadAuthClient_AuthResetTime | 1.3.6.1.4.1.529.23.142.1.1.23 | INTEGER | read-write | The time to reset to the primary server after it has failed. |
| INT externalAuthProfile_RadAuthClient_AuthRspRequired | 1.3.6.1.4.1.529.23.142.1.1.13 | INTEGER | read-write | When set to Yes, entry is allowed only if the authentication server responds with an authentication of the login information. When set to No, entry is also allowed if there is no response from the authentication server. This field is used only for CLID or DNIS authentication. |
| INT externalAuthProfile_RadAuthClient_AuthSend67 | 1.3.6.1.4.1.529.23.142.1.1.18 | INTEGER | read-write | If Yes, default attributes 6,7 of Radius and send them in the authentication request. |
| INT externalAuthProfile_RadAuthClient_AuthSessInterval | 1.3.6.1.4.1.529.23.142.1.1.16 | INTEGER | read-write | Send the number-of-sessions-per-Class Attribute to the authentication server every auth-sess-interval seconds. |
| INT externalAuthProfile_RadAuthClient_AuthSrcPort | 1.3.6.1.4.1.529.23.142.1.1.9 | INTEGER | read-write | The UDP source port to use for RADIUS authentication. If zero, the source port is selected from the non-privileged port range (1024-2000). |
| INT externalAuthProfile_RadAuthClient_AuthTimeout | 1.3.6.1.4.1.529.23.142.1.1.12 | INTEGER | read-write | Number of seconds between retries to the authentication host. |
| INT externalAuthProfile_RadAuthClient_AuthTSSecure | 1.3.6.1.4.1.529.23.142.1.1.17 | INTEGER | read-write | Allow access to terminal server when RADIUS Login-Host is not specify when authTSsecure is set no |
| STR externalAuthProfile_RadAuthClient_IdAuthPrefix | 1.3.6.1.4.1.529.23.142.1.1.28 | DisplayString | read-write | A short text string prepended to the username portion of a CLID or DNIS authentication request. |
| STR externalAuthProfile_RadAuthClient_IdAuthPrefixX25 | 1.3.6.1.4.1.529.23.142.1.1.99 | DisplayString | read-write | A short text string prepended to the username portion of a DNIS authentication request for X25 calls. |
| INT externalAuthProfile_RadAuthServer_AuthAttributeType | 1.3.6.1.4.1.529.23.142.1.1.51 | INTEGER | read-write | The type of attributes required for session matching. |
| IP externalAuthProfile_RadAuthServer_AuthClient | 1.3.6.1.4.1.529.23.142.4.1.3 | IpAddress | read-write | The IP address of the RADIUS clients. |
| INT externalAuthProfile_RadAuthServer_AuthClient_Index_o | 1.3.6.1.4.1.529.23.142.4.1.1 | INTEGER | read-only | |
| INT externalAuthProfile_RadAuthServer_AuthClient_Index1_o | 1.3.6.1.4.1.529.23.142.4.1.2 | INTEGER | read-only | |
| STR externalAuthProfile_RadAuthServer_AuthKey | 1.3.6.1.4.1.529.23.142.2.1.3 | DisplayString | read-write | The on-board RADIUS server key, shared with the RADIUS clients. |
| INT externalAuthProfile_RadAuthServer_AuthKey_Index_o | 1.3.6.1.4.1.529.23.142.2.1.1 | INTEGER | read-only | |
| INT externalAuthProfile_RadAuthServer_AuthKey_Index1_o | 1.3.6.1.4.1.529.23.142.2.1.2 | INTEGER | read-only | |
| IP externalAuthProfile_RadAuthServer_AuthNetmask | 1.3.6.1.4.1.529.23.142.3.1.3 | IpAddress | read-write | The IP netmask of the RADIUS clients. |
| INT externalAuthProfile_RadAuthServer_AuthNetmask_Index_o | 1.3.6.1.4.1.529.23.142.3.1.1 | INTEGER | read-only | |
| INT externalAuthProfile_RadAuthServer_AuthNetmask_Index1_o | 1.3.6.1.4.1.529.23.142.3.1.2 | INTEGER | read-only | |
| INT externalAuthProfile_RadAuthServer_AuthPort | 1.3.6.1.4.1.529.23.142.1.1.49 | INTEGER | read-write | The UDP port to use for the on-board RADIUS server. |
| INT externalAuthProfile_RadAuthServer_AuthRadiusCompat | 1.3.6.1.4.1.529.23.142.1.1.52 | INTEGER | read-write | RADIUS server RADIUS compatibility mode. |
| INT externalAuthProfile_RadAuthServer_AuthSessionKey | 1.3.6.1.4.1.529.23.142.1.1.50 | INTEGER | read-write | Enables Session key assignments. |
| INT externalAuthProfile_RadServEnable | 1.3.6.1.4.1.529.23.142.1.1.4 | INTEGER | read-write | Whether or not the on-board RADIUS server is enabled. |
| INT externalAuthProfile_SecureidAuthClient_AuthDes | 1.3.6.1.4.1.529.23.142.1.1.80 | INTEGER | read-write | Use DES encryption instead of native encryption. |
| STR externalAuthProfile_SecureidAuthClient_AuthNodeSecret | 1.3.6.1.4.1.529.23.142.1.1.81 | DisplayString | read-write | node secret assigned to this router, hexadecimal notation. |
| INT externalAuthProfile_SecureidAuthClient_AuthPort | 1.3.6.1.4.1.529.23.142.1.1.77 | INTEGER | read-write | The UDP destination port to use for authentication. |
| INT externalAuthProfile_SecureidAuthClient_AuthRetrycount | 1.3.6.1.4.1.529.23.142.1.1.79 | INTEGER | read-write | Number of times to retry an authentication attempt. |
| IP externalAuthProfile_SecureidAuthClient_AuthServer1 | 1.3.6.1.4.1.529.23.142.1.1.74 | IpAddress | read-write | The IP address of the first authentication server. |
| IP externalAuthProfile_SecureidAuthClient_AuthServer2 | 1.3.6.1.4.1.529.23.142.1.1.75 | IpAddress | read-write | The IP address of the second authentication server. |
| IP externalAuthProfile_SecureidAuthClient_AuthServer3 | 1.3.6.1.4.1.529.23.142.1.1.76 | IpAddress | read-write | The IP address of the third authentication server. |
| INT externalAuthProfile_SecureidAuthClient_AuthTimeout | 1.3.6.1.4.1.529.23.142.1.1.78 | INTEGER | read-write | Number of seconds between retries to the authentication host. |
| STR externalAuthProfile_TacAuthClient_AuthKey | 1.3.6.1.4.1.529.23.142.1.1.58 | DisplayString | read-write | The RADIUS authentication access key shared with the RADIUS server. |
| INT externalAuthProfile_TacAuthClient_AuthPort | 1.3.6.1.4.1.529.23.142.1.1.56 | INTEGER | read-write | The UDP port to use for TACACS authentication. |
| IP externalAuthProfile_TacAuthClient_AuthServer1 | 1.3.6.1.4.1.529.23.142.1.1.53 | IpAddress | read-write | The IP address of the first TACACS authentication server. |
| IP externalAuthProfile_TacAuthClient_AuthServer2 | 1.3.6.1.4.1.529.23.142.1.1.54 | IpAddress | read-write | The IP address of the second TACACS authentication server. |
| IP externalAuthProfile_TacAuthClient_AuthServer3 | 1.3.6.1.4.1.529.23.142.1.1.55 | IpAddress | read-write | The IP address of the third TACACS authentication server. |
| INT externalAuthProfile_TacAuthClient_AuthSrcPort | 1.3.6.1.4.1.529.23.142.1.1.57 | INTEGER | read-write | The UDP source port to use for TACACS authentication. If zero, the source port is selected from the non-privileged port range (1024-2000). |
| INT externalAuthProfile_TacAuthClient_AuthTimeout | 1.3.6.1.4.1.529.23.142.1.1.59 | INTEGER | read-write | Number of seconds between retries to the authentication host. |
| STR externalAuthProfile_TacplusAcctClient_AcctKey | 1.3.6.1.4.1.529.23.142.1.1.73 | DisplayString | read-write | The TACACS+ accounting access key shared with the TACACS+ server. |
| INT externalAuthProfile_TacplusAcctClient_AcctPort | 1.3.6.1.4.1.529.23.142.1.1.71 | INTEGER | read-write | The TCP destination port to use for TACACS+ accounting. |
| IP externalAuthProfile_TacplusAcctClient_AcctServer1 | 1.3.6.1.4.1.529.23.142.1.1.68 | IpAddress | read-write | The IP address of the first TACACS+ accounting server. |
| IP externalAuthProfile_TacplusAcctClient_AcctServer2 | 1.3.6.1.4.1.529.23.142.1.1.69 | IpAddress | read-write | The IP address of the second TACACS+ accounting server. |
| IP externalAuthProfile_TacplusAcctClient_AcctServer3 | 1.3.6.1.4.1.529.23.142.1.1.70 | IpAddress | read-write | The IP address of the third TACACS+ accounting server. |
| INT externalAuthProfile_TacplusAcctClient_AcctSrcPort | 1.3.6.1.4.1.529.23.142.1.1.72 | INTEGER | read-write | The TCP source port to use for TACACS+ accounting. If zero, the source port is selected from the non-privileged port range (1024-2000). |
| STR externalAuthProfile_TacplusAuthClient_AuthKey | 1.3.6.1.4.1.529.23.142.1.1.65 | DisplayString | read-write | The Tacacs+ authentication access key shared with the TACACS+ server. |
| INT externalAuthProfile_TacplusAuthClient_AuthPort | 1.3.6.1.4.1.529.23.142.1.1.63 | INTEGER | read-write | The TCP destination port to use for TACACS+ authentication. |
| INT externalAuthProfile_TacplusAuthClient_AuthRetries | 1.3.6.1.4.1.529.23.142.1.1.67 | INTEGER | read-write | The number of times to retry the auth hosts before giving up. |
| IP externalAuthProfile_TacplusAuthClient_AuthServer1 | 1.3.6.1.4.1.529.23.142.1.1.60 | IpAddress | read-write | The IP address of the first TACACS+ authentication server. |
| IP externalAuthProfile_TacplusAuthClient_AuthServer2 | 1.3.6.1.4.1.529.23.142.1.1.61 | IpAddress | read-write | The IP address of the second TACACS+ authentication server. |
| IP externalAuthProfile_TacplusAuthClient_AuthServer3 | 1.3.6.1.4.1.529.23.142.1.1.62 | IpAddress | read-write | The IP address of the third TACACS+ authentication server. |
| INT externalAuthProfile_TacplusAuthClient_AuthSrcPort | 1.3.6.1.4.1.529.23.142.1.1.64 | INTEGER | read-write | The TCP source port to use for TACACS+ authentication. If zero, the source port is selected from the non-privileged port range (1024-2000). |
| INT externalAuthProfile_TacplusAuthClient_AuthTimeoutTime | 1.3.6.1.4.1.529.23.142.1.1.66 | INTEGER | read-write | The time to reset to the primary server after it has failed. |
| mibexternalAuthProfile | 1.3.6.1.4.1.529.23.142 | |||
| mibexternalAuthProfile_RadAuthServer_AuthClientEntry | 1.3.6.1.4.1.529.23.142.4.1 | not-accessible | A mibexternalAuthProfile__rad_auth_server__auth_client entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_client profile. | |
| mibexternalAuthProfile_RadAuthServer_AuthClientTable | 1.3.6.1.4.1.529.23.142.4 | not-accessible | A list of mibexternalAuthProfile__rad_auth_server__auth_client profile entries. | |
| mibexternalAuthProfile_RadAuthServer_AuthKeyEntry | 1.3.6.1.4.1.529.23.142.2.1 | not-accessible | A mibexternalAuthProfile__rad_auth_server__auth_key entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_key profile. | |
| mibexternalAuthProfile_RadAuthServer_AuthKeyTable | 1.3.6.1.4.1.529.23.142.2 | not-accessible | A list of mibexternalAuthProfile__rad_auth_server__auth_key profile entries. | |
| mibexternalAuthProfile_RadAuthServer_AuthNetmaskEntry | 1.3.6.1.4.1.529.23.142.3.1 | not-accessible | A mibexternalAuthProfile__rad_auth_server__auth_netmask entry containing objects that maps to the parameters of mibexternalAuthProfile__rad_auth_server__auth_netmask profile. | |
| mibexternalAuthProfile_RadAuthServer_AuthNetmaskTable | 1.3.6.1.4.1.529.23.142.3 | not-accessible | A list of mibexternalAuthProfile__rad_auth_server__auth_netmask profile entries. | |
| mibexternalAuthProfileEntry | 1.3.6.1.4.1.529.23.142.1.1 | not-accessible | A mibexternalAuthProfile entry containing objects that maps to the parameters of mibexternalAuthProfile profile. | |
| mibexternalAuthProfileTable | 1.3.6.1.4.1.529.23.142.1 | not-accessible | A list of mibexternalAuthProfile profile entries. | |
| mibradAcctCallLogProfile | 1.3.6.1.4.1.529.23.143 | |||
| mibradAcctCallLogProfileEntry | 1.3.6.1.4.1.529.23.143.1.1 | not-accessible | A mibradAcctCallLogProfile entry containing objects that maps to the parameters of mibradAcctCallLogProfile profile. | |
| mibradAcctCallLogProfileTable | 1.3.6.1.4.1.529.23.143.1 | not-accessible | A list of mibradAcctCallLogProfile profile entries. | |
| mibradStatProfile | 1.3.6.1.4.1.529.23.141 | |||
| mibradStatProfileEntry | 1.3.6.1.4.1.529.23.141.1.1 | not-accessible | A mibradStatProfile entry containing objects that maps to the parameters of mibradStatProfile profile. | |
| mibradStatProfileTable | 1.3.6.1.4.1.529.23.141.1 | not-accessible | A list of mibradStatProfile profile entries. | |
| INT radAcctCallLogProfile_Action_o | 1.3.6.1.4.1.529.23.143.1.1.19 | INTEGER | read-write | |
| INT radAcctCallLogProfile_CallLogConnectionPacketsEnable | 1.3.6.1.4.1.529.23.143.1.1.17 | INTEGER | read-write | Enable/Disable call logging START/STOP pkts when connection comes up or goes down. This is opposed to line statistics call logging which is always enabled. |
| INT radAcctCallLogProfile_CallLogCsmModemDiag | 1.3.6.1.4.1.529.23.143.1.1.18 | INTEGER | read-write | Enable CSM Modem diagnostics in Call Logging |
| INT radAcctCallLogProfile_CallLogEnable | 1.3.6.1.4.1.529.23.143.1.1.2 | INTEGER | read-write | Enable call log support. |
| IP radAcctCallLogProfile_CallLogHost1 | 1.3.6.1.4.1.529.23.143.1.1.3 | IpAddress | read-write | The IP address of the first (RADIUS_ACCT) call log host. |
| IP radAcctCallLogProfile_CallLogHost2 | 1.3.6.1.4.1.529.23.143.1.1.4 | IpAddress | read-write | The IP address of the second (RADIUS_ACCT) call log host. |
| IP radAcctCallLogProfile_CallLogHost3 | 1.3.6.1.4.1.529.23.143.1.1.5 | IpAddress | read-write | The IP address of the third (RADIUS_ACCT) call log host. |
| INT radAcctCallLogProfile_CallLogIdBase | 1.3.6.1.4.1.529.23.143.1.1.9 | INTEGER | read-write | The Base to use in reporting Account ID. |
| STR radAcctCallLogProfile_CallLogKey | 1.3.6.1.4.1.529.23.143.1.1.7 | DisplayString | read-write | The (RADIUS_ACCT) call log accounting key. |
| INT radAcctCallLogProfile_CallLogLimitRetry | 1.3.6.1.4.1.529.23.143.1.1.12 | INTEGER | read-write | Number of retries before removing call log packet. 0 means leave on retry list until maximum retry entries are exceeded. |
| INT radAcctCallLogProfile_CallLogMultiPacket | 1.3.6.1.4.1.529.23.143.1.1.15 | INTEGER | read-write | Call Logging MultiPacket Enable. |
| INT radAcctCallLogProfile_CallLogPort | 1.3.6.1.4.1.529.23.143.1.1.6 | INTEGER | read-write | The UDP port to use for (RADIUS_ACCT) call log accounting. |
| INT radAcctCallLogProfile_CallLogRadiusCompat | 1.3.6.1.4.1.529.23.143.1.1.13 | INTEGER | read-write | Call Logging RADIUS compatibility mode. |
| INT radAcctCallLogProfile_CallLogResetTime | 1.3.6.1.4.1.529.23.143.1.1.10 | INTEGER | read-write | The timer to reset to the primary server(host-1) after current host is changed to host-2 or host-3. Value is in seconds. If value is 0, no timer is run. |
| INT radAcctCallLogProfile_CallLogServerIndex | 1.3.6.1.4.1.529.23.143.1.1.14 | INTEGER | read-write | The currently active call Logging server Index. The default factory setting is host-1. |
| INT radAcctCallLogProfile_CallLogStopOnly | 1.3.6.1.4.1.529.23.143.1.1.11 | INTEGER | read-write | Send call log Stop packets that have username=0. These are caused by connections that are dropped before authentication is done. |
| INT radAcctCallLogProfile_CallLogStreamPeriod | 1.3.6.1.4.1.529.23.143.1.1.16 | INTEGER | read-write | Number of minutes between snapshots for stream pkts. |
| INT radAcctCallLogProfile_CallLogSwitchover | 1.3.6.1.4.1.529.23.143.1.1.21 | INTEGER | read-write | Determines whether Accounting-on packet with event Ascend-Control-Module-Switchover should be sent or not during switchover when syncing is enabled. |
| INT radAcctCallLogProfile_CallLogTimeout | 1.3.6.1.4.1.529.23.143.1.1.8 | INTEGER | read-write | Number of seconds to wait for a response to previous call log accounting request. |
| INT radAcctCallLogProfile_Index_o | 1.3.6.1.4.1.529.23.143.1.1.1 | INTEGER | read-only | |
| INT radAcctCallLogProfile_VoipCallLogging | 1.3.6.1.4.1.529.23.143.1.1.20 | INTEGER | read-write | To Enable/Disable call logging for VOIP calls. |
| INT radStatProfile_Action_o | 1.3.6.1.4.1.529.23.141.1.1.4 | INTEGER | read-write | |
| INT radStatProfile_CurrentAcctServer | 1.3.6.1.4.1.529.23.141.1.1.3 | INTEGER | read-only | The index of the current RADIUS accounting server. |
| INT radStatProfile_CurrentAuthServer | 1.3.6.1.4.1.529.23.141.1.1.2 | INTEGER | read-only | The index of the current RADIUS authentication server. |
| INT radStatProfile_Index_o | 1.3.6.1.4.1.529.23.141.1.1.1 | INTEGER | read-only |
RFC description
Configures external authentication and RADIUS server profiles for Ascend access devices.
Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.