ALTIGA-HARDWARE-STATS-MIB

All MIBs › ALTIGA-HARDWARE-STATS-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2003-03-27

Category: Hardware and Environment, VPN and Security, Vendor: Altiga

Description: Cisco (formerly Altiga Networks) MIB providing hardware statistics for VPN concentrator appliances, including board-level sensor data such as voltage, temperature, and fan status.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring ALTIGA-HARDWARE-STATS-MIB with a free 30-day trial of IPNetwork Monitor.

What Is ALTIGA-HARDWARE-STATS-MIB?

ALTIGA-HARDWARE-STATS-MIB is a Cisco (formerly Altiga Networks) MIB modeling board-level hardware health for the VPN 3000 Concentrator appliance, per its own stated acronym list covering CPU, power supply (PS), and RPM (fan speed) sensors. It exposes per-sensor voltage readings, alarm flags, alarm occurrence counts, and alarm timestamps for components such as the CPU and power supplies. This is squarely a hardware-monitoring MIB: it directly surfaces CPU voltage rail health, power-supply voltage rail health (e.g., 3V/5V rails), and how often and when each sensor tripped an alarm, which is exactly the kind of data used to catch a failing power supply or CPU voltage regulator before it takes the device down. It is a standalone Altiga-proprietary MIB rather than a reuse of the standard ENTITY-SENSOR-MIB. It is deployed for hardware health monitoring of Cisco VPN 3000 Concentrator appliances in remote-access VPN gateway deployments. Engineers can download the ALTIGA-HARDWARE-STATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALTIGA-HARDWARE-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco VPN 3000 Series Concentrator (formerly Altiga Networks)

Monitoring Examples

alHardwareCpuVoltage paired with alHardwareCpuVoltageAlarm lets an admin see whether the CPU voltage rail is currently out of tolerance, while alHardwareCpuVoltageCount and alHardwareCpuVoltageTime record how many times and when that alarm has fired. alHardwarePs1Voltage3v/alHardwarePs1Voltage5v and their corresponding alarm, count, and time objects monitor the primary power supply's voltage rails, flagging a degrading PSU before it causes an outage.

What Can Be Monitored

CPU voltage level and alarm state
power supply voltage rails (3V/5V)
voltage alarm occurrence count
voltage alarm timestamp
overall hardware sensor health

Imported Objects

From ALTIGA-GLOBAL-REG

alHardwareMibModule

OBJECT-IDENTITY

From ALTIGA-MIB

alHardwareGroup	OBJECT-IDENTITY
alStatsHardware	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using alHardwareCpuVoltageCount OID:

Select a Cisco (Altiga) VPN 3000 Series Concentrator (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alHardwareCpuVoltageCount into the Find box to locate it in the OID tree, then select it and click OK. The number of alarm events for CPU voltage. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
G32 alHardwareBoardVoltage3v	1.3.6.1.4.1.3076.2.1.2.22.1.21	Gauge32	read-only	The current 3V voltage of the mainboard in centivolts.
T/F alHardwareBoardVoltage3vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.22	TruthValue	read-only	The alarm status for the mainboard 3v voltage. This alarm will fired when the 3v mainboard voltage is detected out of configured range.
C32 alHardwareBoardVoltage3vCount	1.3.6.1.4.1.3076.2.1.2.22.1.23	Counter32	read-only	The number of alarm events for the mainboard 3v voltage.
TIK alHardwareBoardVoltage3vTime	1.3.6.1.4.1.3076.2.1.2.22.1.24	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for the mainboard 3v voltage.
G32 alHardwareBoardVoltage5v	1.3.6.1.4.1.3076.2.1.2.22.1.25	Gauge32	read-only	The current 5V voltage of the mainboard in centivolts.
T/F alHardwareBoardVoltage5vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.26	TruthValue	read-only	The alarm status for the mainboard 5v voltage. This alarm will fired when the 5v mainboard voltage is detected out of configured range.
C32 alHardwareBoardVoltage5vCount	1.3.6.1.4.1.3076.2.1.2.22.1.27	Counter32	read-only	The number of alarm events for the mainboard 5v voltage.
TIK alHardwareBoardVoltage5vTime	1.3.6.1.4.1.3076.2.1.2.22.1.28	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for the mainboard 5v voltage.
I32 alHardwareCageTemp	1.3.6.1.4.1.3076.2.1.2.22.1.33	Integer32	read-only	The current cage temperature in degrees C.
T/F alHardwareCageTempAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.34	TruthValue	read-only	The alarm status for the cage temperature. This alarm will fired when the cage temperature is detected out of configured range.
C32 alHardwareCageTempCount	1.3.6.1.4.1.3076.2.1.2.22.1.35	Counter32	read-only	The number of alarm events for the cage temperature.
TIK alHardwareCageTempTime	1.3.6.1.4.1.3076.2.1.2.22.1.36	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for the cage temperature.
CON alHardwareChassis	1.3.6.1.4.1.3076.2.1.2.22.1.60	ConcentratorType	read-only	The type of VPN Concentrator this is.
T/F alHardwareClientEthPrivSwitch	1.3.6.1.4.1.3076.2.1.2.22.1.62	TruthValue	read-only	Whether or not the 3002 Hardware Client has an Ethernet Switch for the private interface.
I32 alHardwareCpuTemp	1.3.6.1.4.1.3076.2.1.2.22.1.29	Integer32	read-only	The current CPU temperature in degrees C.
T/F alHardwareCpuTempAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.30	TruthValue	read-only	The alarm status for the CPU temperature. This alarm will fired when the CPU temperature is detected out of configured range.
C32 alHardwareCpuTempCount	1.3.6.1.4.1.3076.2.1.2.22.1.31	Counter32	read-only	The number of alarm events for the CPU temperature.
TIK alHardwareCpuTempTime	1.3.6.1.4.1.3076.2.1.2.22.1.32	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for the CPU temperature.
G32 alHardwareCpuVoltage	1.3.6.1.4.1.3076.2.1.2.22.1.1	Gauge32	read-only	The current CPU voltage in centivolts.
T/F alHardwareCpuVoltageAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.2	TruthValue	read-only	The alarm status for CPU voltage. This alarm will fired when the CPU voltage is detected out of configured range.
C32 alHardwareCpuVoltageCountEx	1.3.6.1.4.1.3076.2.1.2.22.1.3	Counter32	read-only	The number of alarm events for CPU voltage.
G32 alHardwareCpuVoltageNominal	1.3.6.1.4.1.3076.2.1.2.22.1.61	Gauge32	read-only	The nominal CPU voltage in centivolts for the concentrator.
TIK alHardwareCpuVoltageTime	1.3.6.1.4.1.3076.2.1.2.22.1.4	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for CPU voltage.
G32 alHardwareFan1Rpm	1.3.6.1.4.1.3076.2.1.2.22.1.37	Gauge32	read-only	The current speed of fan 1 in RPM.
T/F alHardwareFan1RpmAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.38	TruthValue	read-only	The alarm status for fan 1 RPM. This alarm will fired when fan 1 RPM is detected out of configured range.
C32 alHardwareFan1RpmCount	1.3.6.1.4.1.3076.2.1.2.22.1.39	Counter32	read-only	The number of alarm events for fan 1 RPM.
TIK alHardwareFan1RpmTime	1.3.6.1.4.1.3076.2.1.2.22.1.40	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for fan 1 RPM.
G32 alHardwareFan2Rpm	1.3.6.1.4.1.3076.2.1.2.22.1.41	Gauge32	read-only	The current speed of fan 2 in RPM.
T/F alHardwareFan2RpmAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.42	TruthValue	read-only	The alarm status for fan 2 RPM. This alarm will fired when fan 2 RPM is detected out of configured range.
C32 alHardwareFan2RpmCount	1.3.6.1.4.1.3076.2.1.2.22.1.43	Counter32	read-only	The number of alarm events for fan 2 RPM.
TIK alHardwareFan2RpmTime	1.3.6.1.4.1.3076.2.1.2.22.1.44	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for fan 2 RPM.
G32 alHardwareFan3Rpm	1.3.6.1.4.1.3076.2.1.2.22.1.45	Gauge32	read-only	The current speed of fan 3 in RPM.
T/F alHardwareFan3RpmAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.46	TruthValue	read-only	The alarm status for fan 3 RPM. This alarm will fired when fan 3 RPM is detected out of configured range.
C32 alHardwareFan3RpmCount	1.3.6.1.4.1.3076.2.1.2.22.1.47	Counter32	read-only	The number of alarm events for fan 3 RPM.
TIK alHardwareFan3RpmTime	1.3.6.1.4.1.3076.2.1.2.22.1.48	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for fan 3 RPM.
INT alHardwarePs1Type	1.3.6.1.4.1.3076.2.1.2.22.1.49	INTEGER	read-only	The type of power supply for Power Supply slot 1.
G32 alHardwarePs1Voltage3v	1.3.6.1.4.1.3076.2.1.2.22.1.5	Gauge32	read-only	The current 3V voltage of Power Supply 1 in centivolts.
T/F alHardwarePs1Voltage3vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.6	TruthValue	read-only	The alarm status for PS1 3v voltage. This alarm will fired when the 3v power supply 1 voltage is detected out of configured range.
C32 alHardwarePs1Voltage3vCount	1.3.6.1.4.1.3076.2.1.2.22.1.7	Counter32	read-only	The number of alarm events for PS1 3v voltage.
TIK alHardwarePs1Voltage3vTime	1.3.6.1.4.1.3076.2.1.2.22.1.8	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for PS1 3v voltage.
G32 alHardwarePs1Voltage5v	1.3.6.1.4.1.3076.2.1.2.22.1.9	Gauge32	read-only	The current 5V voltage of Power Supply 1 in centivolts.
T/F alHardwarePs1Voltage5vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.10	TruthValue	read-only	The alarm status for PS1 5v voltage. This alarm will fired when the 5v power supply 1 voltage is detected out of configured range.
C32 alHardwarePs1Voltage5vCount	1.3.6.1.4.1.3076.2.1.2.22.1.11	Counter32	read-only	The number of alarm events for PS1 5v voltage.
TIK alHardwarePs1Voltage5vTime	1.3.6.1.4.1.3076.2.1.2.22.1.12	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for PS1 5v voltage.
INT alHardwarePs2Type	1.3.6.1.4.1.3076.2.1.2.22.1.50	INTEGER	read-only	The type of power supply for Power Supply slot 2.
G32 alHardwarePs2Voltage3v	1.3.6.1.4.1.3076.2.1.2.22.1.13	Gauge32	read-only	The current 3V voltage of Power Supply 2 in centivolts.
T/F alHardwarePs2Voltage3vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.14	TruthValue	read-only	The alarm status for PS2 3v voltage. This alarm will fired when the 3v power supply 2 voltage is detected out of configured range.
C32 alHardwarePs2Voltage3vCount	1.3.6.1.4.1.3076.2.1.2.22.1.15	Counter32	read-only	The number of alarm events for PS2 3v voltage.
TIK alHardwarePs2Voltage3vTime	1.3.6.1.4.1.3076.2.1.2.22.1.16	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for PS2 3v voltage.
G32 alHardwarePs2Voltage5v	1.3.6.1.4.1.3076.2.1.2.22.1.17	Gauge32	read-only	The current 5V voltage of Power Supply 2 in centivolts.
T/F alHardwarePs2Voltage5vAlarm	1.3.6.1.4.1.3076.2.1.2.22.1.18	TruthValue	read-only	The alarm status for PS2 5v voltage. This alarm will fired when the 5v power supply 2 voltage is detected out of configured range.
C32 alHardwarePs2Voltage5vCount	1.3.6.1.4.1.3076.2.1.2.22.1.19	Counter32	read-only	The number of alarm events for PS2 5v voltage.
TIK alHardwarePs2Voltage5vTime	1.3.6.1.4.1.3076.2.1.2.22.1.20	TimeTicks	read-only	The sysUptime at the time of the last change of alarm status for PS2 5v voltage.
U32 alHardwareRamSize	1.3.6.1.4.1.3076.2.1.2.22.1.59	Unsigned32	read-only	The amount of memory, in MB on the concentrator.
STR alHardwareSerialNumber	1.3.6.1.4.1.3076.2.1.2.22.1.63	DisplayString	read-only	Unit serial number.
CON alHardwareSlot1Card	1.3.6.1.4.1.3076.2.1.2.22.1.51	ConcentratorCard	read-only	The type of card in slot 1.
T/F alHardwareSlot1Operational	1.3.6.1.4.1.3076.2.1.2.22.1.55	TruthValue	read-only	The operational status of card in slot 1.
CON alHardwareSlot2Card	1.3.6.1.4.1.3076.2.1.2.22.1.52	ConcentratorCard	read-only	The type of card in slot 2.
T/F alHardwareSlot2Operational	1.3.6.1.4.1.3076.2.1.2.22.1.56	TruthValue	read-only	The operational status of card in slot 2.
CON alHardwareSlot3Card	1.3.6.1.4.1.3076.2.1.2.22.1.53	ConcentratorCard	read-only	The type of card in slot 3.
T/F alHardwareSlot3Operational	1.3.6.1.4.1.3076.2.1.2.22.1.57	TruthValue	read-only	The operational status of card in slot 3.
CON alHardwareSlot4Card	1.3.6.1.4.1.3076.2.1.2.22.1.54	ConcentratorCard	read-only	The type of card in slot 4.
T/F alHardwareSlot4Operational	1.3.6.1.4.1.3076.2.1.2.22.1.58	TruthValue	read-only	The operational status of card in slot 4.
alStatsHardwareGlobal	1.3.6.1.4.1.3076.2.1.2.22.1
altigaHardwareStatsGroup	1.3.6.1.4.1.3076.2.1.1.1.22.2			The objects for Hardware statistics.
altigaHardwareStatsMibCompliance	1.3.6.1.4.1.3076.1.1.27.2.1.1.1			The compliance statement for agents which implement the Altiga Hardware Statistics MIB.
altigaHardwareStatsMibCompliances	1.3.6.1.4.1.3076.1.1.27.2.1.1
altigaHardwareStatsMibConformance	1.3.6.1.4.1.3076.1.1.27.2.1
altigaHardwareStatsMibModule	1.3.6.1.4.1.3076.1.1.27.2			The Altiga Hardware Statistics MIB models counters and objects that are of management interest for the hardware. Acronyms The following acronyms are used in this document: CPU: Central Processing Unit MB: Megabyte MIB: Management Information Base PS: Power Supply RPM: Revolutions Per Minute SEP: Scalable Encryption Processor WAN: Wide Area Network

RFC description

Hardware statistics including CPU, fans, power supplies for Altiga/Cisco devices.

Start monitoring Cisco (Altiga) VPN 3000 Series Concentrators (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALTIGA-HARDWARE-STATS-MIB