F3-EOMPLS-MIB

All MIBs › F3-EOMPLS-MIB

Organization: ADVA Optical Networking

Last Updated: 2015-08-14

Category: Domain: Telco/Transport, MPLS and Traffic Engineering, Pseudowire, VPN and Security, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Ethernet over MPLS (EoMPLS) pseudowire configuration and monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-EOMPLS-MIB?

F3-EOMPLS-MIB is an ADVA Optical Networking vendor MIB (module identity under fsp150cm) that manages Ethernet-over-MPLS (EoMPLS) pseudowires on the F3 FSP150CM/CC Carrier Ethernet access/aggregation product line. Its central f3EoMplsPwTable, indexed by neIndex and f3EoMplsPwIndex, configures per-pseudowire mode (raw/tagged), transmit/receive tunnel and VC MPLS labels with EXP and TTL values, outer S-tag VLAN ID/priority, discovery type (static/dynamic), destination IP/MAC, admin/operational/secondary state, and row status, while extension tables augment cmEthernetNetPortEntry and cmPrioMapV2PrioMappingCOSEntry to add a pseudowire source IP and CoS-to-MPLS-EXP mappings. Performance tables (f3EoMplsPwStatsTable and f3EoMplsPwHistoryTable) track a TTL-equal-zero drop counter across 5-minute, 15-minute, daily, and rollover intervals, and a threshold table drives an f3EoMplsPwThresholdCrossingAlert notification when a monitored PM value crosses a configured bound. It depends on the CM-COMMON-MIB and CM-FACILITY-MIB for state/type definitions and on CM-ENTITY-MIB for network-element indexing, and administrators can download the F3-EOMPLS-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-EOMPLS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC (F3) Carrier Ethernet access/aggregation platforms

Monitoring Examples

An operator polls f3EoMplsPwOperationalState per f3EoMplsPwIndex to confirm a pseudowire is up, and watches f3EoMplsPwStatsTtlEqual0Drop for a rising count — a spike there indicates MPLS TTL-expiry drops consistent with a routing loop or excessive hop count in the MPLS core.

What Can Be Monitored

EoMPLS pseudowire label/tunnel configuration
pseudowire admin/operational/secondary state
TTL-expiry drop counters (current & history)
PM threshold-crossing alerts
outer S-tag VLAN/priority mapping
CoS-to-MPLS-EXP priority mapping

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
CmPmBinAction
CmPmIntervalType
OperationalState
PerfCounter64
SecondaryState
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex

OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetNetPortEntry	OBJECT-TYPE
cmFlowEntry	OBJECT-TYPE
cmPrioMapV2PrioMappingCOSEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3EoMplsMIB	1.3.6.1.4.1.2544.1.12.39			This module defines the Ethernet Service Manager MIB defitinions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3EoMplsConfigObjects	1.3.6.1.4.1.2544.1.12.39.1
f3EoMplsPwTable	1.3.6.1.4.1.2544.1.12.39.1.1		not-accessible	This table has list of entries with which FSPNM can associate some information in the form of name-value pairs.
f3EoMplsPwEntry	1.3.6.1.4.1.2544.1.12.39.1.1.1		not-accessible	The conceptual row in f3EoMplsPwTable.
I32 f3EoMplsPwIndex	1.3.6.1.4.1.2544.1.12.39.1.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this EoMpls Pw.
EOM f3EoMplsPwMode	1.3.6.1.4.1.2544.1.12.39.1.1.1.2	EoMplsMode	read-write	This objects specify EoMpls Pw's mode, it could be raw or tagged.
U32 f3EoMplsPwTxTunnelLabel	1.3.6.1.4.1.2544.1.12.39.1.1.1.3	Unsigned32	read-write	This objects specify EoMpls tunnel label on transimitted direction.
U32 f3EoMplsPwTxTunnelExp	1.3.6.1.4.1.2544.1.12.39.1.1.1.4	Unsigned32	read-write	This objects specify EoMpls tunnel EXP value on transimitted direction.
U32 f3EoMplsPwTxTunnelTtl	1.3.6.1.4.1.2544.1.12.39.1.1.1.5	Unsigned32	read-write	This objects specify EoMpls tunnel Ttl on transimitted direction.
T/F f3EoMplsPwTxVcLabelControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.6	TruthValue	read-write	This objects specify whether enabled VC label on transimitted direction.
U32 f3EoMplsPwTxVcLabel	1.3.6.1.4.1.2544.1.12.39.1.1.1.7	Unsigned32	read-write	This objects specify EoMpls VC label on transimitted direction.
U32 f3EoMplsPwTxVcExp	1.3.6.1.4.1.2544.1.12.39.1.1.1.8	Unsigned32	read-write	This objects specify EoMpls VC EXP value on transimitted direction.
U32 f3EoMplsPwTxVcTtl	1.3.6.1.4.1.2544.1.12.39.1.1.1.9	Unsigned32	read-write	This objects specify EoMpls VC Ttl value on transimitted direction.
U32 f3EoMplsPwRxTunnelLabel	1.3.6.1.4.1.2544.1.12.39.1.1.1.10	Unsigned32	read-write	This objects specify EoMpls tunnel label on recieve direction.
U32 f3EoMplsPwRxTunnelExp	1.3.6.1.4.1.2544.1.12.39.1.1.1.11	Unsigned32	read-only	This objects specify EoMpls tunnel label Exp on recieve direction.
U32 f3EoMplsPwRxTunnelTtl	1.3.6.1.4.1.2544.1.12.39.1.1.1.12	Unsigned32	read-only	This objects specify EoMpls tunnel label Ttl on recieve direction.
T/F f3EoMplsPwRxVcLabelControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.13	TruthValue	read-write	This objects specify whether enabled VC label on recieve direction.
U32 f3EoMplsPwRxVcLabel	1.3.6.1.4.1.2544.1.12.39.1.1.1.14	Unsigned32	read-write	This objects specify EoMpls VC label on recieve direction.
U32 f3EoMplsPwRxVcExp	1.3.6.1.4.1.2544.1.12.39.1.1.1.15	Unsigned32	read-only	This objects specify EoMpls VC label Exp on recieve direction.
U32 f3EoMplsPwRxVcTtl	1.3.6.1.4.1.2544.1.12.39.1.1.1.16	Unsigned32	read-only	This objects specify EoMpls VC label Ttl on recieve direction.
T/F f3EoMplsPwOuterStagControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.17	TruthValue	read-write	This objects specify whether enabled outer stag.
VLA f3EoMplsPwOuterStagVlanId	1.3.6.1.4.1.2544.1.12.39.1.1.1.18	VlanId	read-write	This object allows to specify outer stag VlanId.
VLA f3EoMplsPwOuterStagVlanPri	1.3.6.1.4.1.2544.1.12.39.1.1.1.19	VlanPriority	read-write	This object allows to specify outer stag Vlan Priority.
EOM f3EoMplsPwDiscoverType	1.3.6.1.4.1.2544.1.12.39.1.1.1.20	EoMplsDiscoveryType	read-write	This object allows to specify EoMpls Pw discovery type.
IP f3EoMplsPwDestIp	1.3.6.1.4.1.2544.1.12.39.1.1.1.21	IpAddress	read-write	This object allows to specify EoMpls Pw destination ip.
MAC f3EoMplsPwDestMac	1.3.6.1.4.1.2544.1.12.39.1.1.1.22	MacAddress	read-write	This object allows to specify EoMpls Pw destination MacAddress.
ADM f3EoMplsPwAdminState	1.3.6.1.4.1.2544.1.12.39.1.1.1.23	AdminState	read-write	This object represents the Administrative State of the EoMpls Pw.
OPE f3EoMplsPwOperationalState	1.3.6.1.4.1.2544.1.12.39.1.1.1.24	OperationalState	read-only	This object represents the Operational State of the EoMpls Pw.
SEC f3EoMplsPwSecondaryState	1.3.6.1.4.1.2544.1.12.39.1.1.1.25	SecondaryState	read-only	This object represents the Secondary State of the EoMpls Pw.
STO f3EoMplsPwStorageType	1.3.6.1.4.1.2544.1.12.39.1.1.1.26	StorageType	read-create	The type of storage configured for this entry.
ROW f3EoMplsPwRowStatus	1.3.6.1.4.1.2544.1.12.39.1.1.1.27	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3EoMplsPwRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3EoMplsPwRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3EoMplsPwRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3EoMplsPwInnerExpMappingControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.28	TruthValue	read-write	When its value is disabled, the priority mapping profile won't take effect on inner EXP.
T/F f3EoMplsPwOuterExpMappingControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.29	TruthValue	read-write	When its value is disabled, the priority mapping profile won't take effect on outer EXP.
T/F f3EoMplsPwOuterTagPriMappingControl	1.3.6.1.4.1.2544.1.12.39.1.1.1.30	TruthValue	read-write	When its value is disabled, the priority mapping profile won't take effect on outer stag.
NUM f3EoMplsPwEgressInterface	1.3.6.1.4.1.2544.1.12.39.1.1.1.31	VariablePointer	read-write	This object specify the egress interface, it could be port, lag, ppg etc.
f3NetPortExtEoMplsTable	1.3.6.1.4.1.2544.1.12.39.1.2		not-accessible	This table extends cmEthernetNetPortTable by adding EoMpls related parameters.
f3NetPortExtEoMplsEntry	1.3.6.1.4.1.2544.1.12.39.1.2.1		not-accessible	A conceptual row in the f3NetPortExtEoMplsTable.
IP f3NetPortExtEoMplsSrcIp	1.3.6.1.4.1.2544.1.12.39.1.2.1.1	IpAddress	read-write	This object allows configuring EoMpls Source Ip address.
f3PrioMapV2PrioMappingCosExtEoMplsTable	1.3.6.1.4.1.2544.1.12.39.1.3		not-accessible	This table extends cmPrioMapV2PrioMappingCOSTable by adding EoMpls related parameters.
f3PrioMapV2PrioMappingCosExtEoMplsEntry	1.3.6.1.4.1.2544.1.12.39.1.3.1		not-accessible	A conceptual row in the f3PrioMapV2PrioMappingCosExtEoMplsTable.
I32 f3PrioMapV2PrioMappingCosOuterMplsExp	1.3.6.1.4.1.2544.1.12.39.1.3.1.1	Integer32	read-write	This object allows configuring EoMpls outer Mpls Exp.
I32 f3PrioMapV2PrioMappingCosInnerMplsExp	1.3.6.1.4.1.2544.1.12.39.1.3.1.2	Integer32	read-write	This object allows configuring EoMpls Inner Mpls Exp.
f3EoMplsPerformance	1.3.6.1.4.1.2544.1.12.39.2
f3EoMplsPwStatsTable	1.3.6.1.4.1.2544.1.12.39.2.1		not-accessible	A collection of EoMpls Pw related statistics. These reflect the current data.
f3EoMplsPwStatsEntry	1.3.6.1.4.1.2544.1.12.39.2.1.1		not-accessible	A conceptual row in the f3EoMplsPwStatsTable. Entries exist in this table for each EoMpls Pw.
I32 f3EoMplsPwStatsIndex	1.3.6.1.4.1.2544.1.12.39.2.1.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3EoMplsPwStatsIntervalType	1.3.6.1.4.1.2544.1.12.39.2.1.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3EoMplsPwStatsValid	1.3.6.1.4.1.2544.1.12.39.2.1.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3EoMplsPwStatsAction	1.3.6.1.4.1.2544.1.12.39.2.1.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3EoMplsPwStatsTtlEqual0Drop	1.3.6.1.4.1.2544.1.12.39.2.1.1.5	PerfCounter64	read-only	The number of packets matching the ACL rule.
f3EoMplsPwHistoryTable	1.3.6.1.4.1.2544.1.12.39.2.2		not-accessible	A collection of EoMpls related history statistics. These reflect the history data.
f3EoMplsPwHistoryEntry	1.3.6.1.4.1.2544.1.12.39.2.2.1		not-accessible	A conceptual row in the f3EoMplsPwHistoryTable. Entries exist in this table for each L3 acl rule.
I32 f3EoMplsPwHistoryIndex	1.3.6.1.4.1.2544.1.12.39.2.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
DAT f3EoMplsPwHistoryTime	1.3.6.1.4.1.2544.1.12.39.2.2.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3EoMplsPwHistoryValid	1.3.6.1.4.1.2544.1.12.39.2.2.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3EoMplsPwHistoryAction	1.3.6.1.4.1.2544.1.12.39.2.2.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3EoMplsPwHistoryTtlEqual0Drop	1.3.6.1.4.1.2544.1.12.39.2.2.1.5	PerfCounter64	read-only	The number of packets matching acl rule.
f3EoMplsPwThresholdTable	1.3.6.1.4.1.2544.1.12.39.2.3		not-accessible	A table of entries that allow manageability of EoMpls Pw Thresholds.
f3EoMplsPwThresholdEntry	1.3.6.1.4.1.2544.1.12.39.2.3.1		not-accessible	A conceptual row in the f3EoMplsPwThresholdTable.
I32 f3EoMplsPwThresholdIndex	1.3.6.1.4.1.2544.1.12.39.2.3.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3EoMplsPwThresholdTable.
NUM f3EoMplsPwThresholdInterval	1.3.6.1.4.1.2544.1.12.39.2.3.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3EoMplsPwThresholdVariable	1.3.6.1.4.1.2544.1.12.39.2.3.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3EoMplsPwThresholdValueLo	1.3.6.1.4.1.2544.1.12.39.2.3.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3EoMplsPwThresholdValueHi	1.3.6.1.4.1.2544.1.12.39.2.3.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3EoMplsPwThresholdMonValue	1.3.6.1.4.1.2544.1.12.39.2.3.1.6	Counter64	read-only	Monitored value corresponding to f3EoMplsPwThresholdVariable.
f3EoMplsNotifications	1.3.6.1.4.1.2544.1.12.39.3
NTF f3EoMplsPwThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.39.3.1			This trap is sent each time a threshold on a PM condition on an EoMpls Pw is crossed.
f3EoMplsConformance	1.3.6.1.4.1.2544.1.12.39.4
f3EoMplsCompliances	1.3.6.1.4.1.2544.1.12.39.4.1
f3EoMplsCompliance	1.3.6.1.4.1.2544.1.12.39.4.1.1			Describes the requirements for conformance to the F3-EOMPLS-MIB compilance.
f3EoMplsGroups	1.3.6.1.4.1.2544.1.12.39.4.2
f3EoMplsConfigGroup	1.3.6.1.4.1.2544.1.12.39.4.2.1			A collection of objects used to manage the EoMpls Configuration objects.

RFC description

Manages Ethernet over MPLS pseudowire services with configuration and performance monitoring for ADVA optical devices.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Ethernet-over-MPLS pseudowires) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-EOMPLS-MIB

What Is F3-EOMPLS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description