All MIBs › DFL210-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: VPN and Security, Vendor: D-Link
Description: Manages D-Link DFL-210 firewall appliance security policies, VPN, and network interfaces.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL210-MIB?
DFL210-MIB is a D-Link enterprise MIB for the DFL-210 series NetDefend firewall/UTM appliance, part of D-Link's security gateway product line built on the NetDefendOS platform. It exposes system-level performance and traffic data including CPU load, forwarded bit and packet rates, internal buffer usage, active connection counts, and protocol-specific session-state counters (TCP SYN, TCP open, TCP FIN, UDP, ICMP, and other), alongside per-interface statistics. Administrators use it to monitor the hardware/software health and load of the firewall -- tracking dfl210SysCpuLoad for CPU saturation, dfl210SysBuffUse for internal buffer pressure, and dfl210SysConns together with the per-protocol session counters to detect abnormal connection patterns such as a SYN flood (elevated dfl210SysPscTcpSyn relative to dfl210SysPscTcpOpen) -- central to catching performance degradation or attack conditions on the appliance. It is a self-contained vendor MIB but is layered on standard IF-MIB-style interface statistics for its per-interface counters. It is typically deployed on D-Link DFL-210 firewall appliances protecting small-to-midsize office or branch networks. Engineers can download the DFL210-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL210-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-210 NetDefend firewall appliance
Monitoring Examples
An operator would poll dfl210SysCpuLoad and dfl210SysBuffUse together to see whether the firewall is under CPU or buffer pressure, and dfl210SysConns alongside dfl210SysPscTcpSyn versus dfl210SysPscTcpOpen to detect a potential SYN-flood attack where half-open connections vastly outnumber fully established ones. Comparing dfl210SysForwardedBits and dfl210SysForwardedPackets over time shows overall throughput trends, and a sudden drop despite steady dfl210SysConns could indicate a bottleneck. Walking dfl210IfStatsTable per interface would pinpoint which physical interface is carrying the anomalous load.
What Can Be Monitored
- CPU load
- forwarded bits/packets throughput
- internal buffer usage
- active connection count
- per-protocol session counters (TCP SYN/open/FIN, UDP, ICMP)
- per-interface traffic statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl210SysForwardedBits OID:
Select a D-Link DFL-210 NetDefend firewall appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl210SysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| ipsFirewall | 1.3.6.1.4.1.171.20.1 | |||
| dfl210 | 1.3.6.1.4.1.171.20.1.1 | |||
| dfl210OS | 1.3.6.1.4.1.171.20.1.1.1 | |||
| dfl210OSStats | 1.3.6.1.4.1.171.20.1.1.1.2 | |||
| dfl210System | 1.3.6.1.4.1.171.20.1.1.1.2.1 | |||
| G32 dfl210SysCpuLoad | 1.3.6.1.4.1.171.20.1.1.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl210SysForwardedBitsEx | 1.3.6.1.4.1.171.20.1.1.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl210SysForwardedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl210SysBuffUse | 1.3.6.1.4.1.171.20.1.1.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl210SysConns | 1.3.6.1.4.1.171.20.1.1.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl210SysPerStateCounters | 1.3.6.1.4.1.171.20.1.1.1.2.1.6 | |||
| G32 dfl210SysPscTcpSyn | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl210SysPscTcpOpen | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl210SysPscTcpFin | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl210SysPscUdp | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl210SysPscIcmp | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl210SysPscOther | 1.3.6.1.4.1.171.20.1.1.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl210IfStatsTable | 1.3.6.1.4.1.171.20.1.1.1.2.1.7 | not-accessible | A table of DFL-210 specific interfaces statistics | |
| dfl210IfStatsEntry | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1 | not-accessible | The row in a table of DFL-210 specific interface statistics | |
| I32 dfl210IfStatsIndex | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl210SysIfStatsTable |
| STR dfl210IfName | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl210IfFragsIn | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl210IfFragReassOk | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl210IfFragReassFail | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl210IfPktsInCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl210IfPktsOutCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl210IfBitsInCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl210IfBitsOutCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl210IfPktsTotCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl210IfBitsTotCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl210IfHCPktsInCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl210IfPktsInCnt. |
| C64 dfl210IfHCPktsOutCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl210IfPktsOutCnt. |
| C64 dfl210IfHCBitsInCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl210IfBitsInCnt. |
| C64 dfl210IfHCBitsOutCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl210IfBitsOutCnt. |
| C64 dfl210IfHCPktsTotCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl210IfPktsTotCnt. |
| C64 dfl210IfHCBitsTotCnt | 1.3.6.1.4.1.171.20.1.1.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl210IfBitsTotCnt. |
| dfl210IfRxRingTable | 1.3.6.1.4.1.171.20.1.1.1.2.1.8 | not-accessible | A table of DFL-210 specific interface Rx ring statistics | |
| dfl210IfRxRingEntry | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1 | not-accessible | The row in a table of DFL-210 specific interface Rx ring statistics. | |
| I32 dfl210IfRxRingIndex | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl210IfRxRingTable. |
| C32 dfl210IfRxRingFifoErrors | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl210IfRxDespools | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl210IfRxAvgUse | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl210IfRxRingSaturation | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl210RxRingFlooded | 1.3.6.1.4.1.171.20.1.1.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl210IfTxRingTable | 1.3.6.1.4.1.171.20.1.1.1.2.1.9 | not-accessible | A table of DFL-210 specific interface Tx ring statistics | |
| dfl210IfTxRingEntry | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1 | not-accessible | The row in a table of DFL-210 specific interface Tx ring statistics. | |
| I32 dfl210IfTxRingIndex | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl210IfRxRingTable. |
| G32 dfl210IfTxDespools | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl210IfTxAvgUse | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl210IfTxRingSaturation | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl210RxTingFlooded | 1.3.6.1.4.1.171.20.1.1.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl210IfVlanStatsTable | 1.3.6.1.4.1.171.20.1.1.1.2.1.10 | not-accessible | A table of DFL-210 VLAN statistics | |
| dfl210IfVlanStatsEntry | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1 | not-accessible | The row in a table of dfl210IfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl210IfVlanIndex | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl210IfVlanStatsTable. |
| C32 dfl210IfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl210IfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl210IfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl210IfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl210IfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl210IfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.1.1.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl210HWSensorTable | 1.3.6.1.4.1.171.20.1.1.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl210HWSensorEntry | 1.3.6.1.4.1.171.20.1.1.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl210HWSensorIndex | 1.3.6.1.4.1.171.20.1.1.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl210HWSensorName | 1.3.6.1.4.1.171.20.1.1.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl210HWSensorValue | 1.3.6.1.4.1.171.20.1.1.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl210HWSensorUnit | 1.3.6.1.4.1.171.20.1.1.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl210SysMemUsage | 1.3.6.1.4.1.171.20.1.1.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl210SysTCPUsage | 1.3.6.1.4.1.171.20.1.1.1.2.1.13 | |||
| G32 dfl210SysTCPRecvSmall | 1.3.6.1.4.1.171.20.1.1.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl210SysTCPRecvLarge | 1.3.6.1.4.1.171.20.1.1.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl210SysTCPSendSmall | 1.3.6.1.4.1.171.20.1.1.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl210SysTCPSendLarge | 1.3.6.1.4.1.171.20.1.1.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl210SysTimerUsage | 1.3.6.1.4.1.171.20.1.1.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl210SysConnOPS | 1.3.6.1.4.1.171.20.1.1.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl210SysConnCPS | 1.3.6.1.4.1.171.20.1.1.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl210SysHCForwardedBits | 1.3.6.1.4.1.171.20.1.1.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl210VPN | 1.3.6.1.4.1.171.20.1.1.1.2.2 | |||
| dfl210IPsec | 1.3.6.1.4.1.171.20.1.1.1.2.2.1 | |||
| dfl210IPsecGlobal | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1 | |||
| G32 dfl210IPsecPhaseOneActive | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl210IPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl210IPsecQuickModeActive | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl210IPsecPhaseOneDone | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl210IPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl210IPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl210IPsecQuickModeDone | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl210IPsecQuickModeFailed | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl210IPsecInfoDone | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl210IPsecInfoFailed | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl210IPsecInOctetsComp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl210IPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl210IPsecOutOctetsComp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl210IPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl210IPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl210IPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl210IPsecInPackets | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl210IPsecOutPackets | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl210IPsecForwardedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl210IPsecActiveTransforms | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl210IPsecTotalTransforms | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl210IPsecOutOfTransforms | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl210IPsecTotalRekeys | 1.3.6.1.4.1.171.20.1.1.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl210Rules | 1.3.6.1.4.1.171.20.1.1.1.2.3 | |||
| dfl210RuleUseTable | 1.3.6.1.4.1.171.20.1.1.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl210RuleUseEntry | 1.3.6.1.4.1.171.20.1.1.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl210RuleIndex | 1.3.6.1.4.1.171.20.1.1.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl210RuleName | 1.3.6.1.4.1.171.20.1.1.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl210RuleUse | 1.3.6.1.4.1.171.20.1.1.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl210IPPools | 1.3.6.1.4.1.171.20.1.1.1.2.4 | |||
| I32 dfl210IPPoolsNumber | 1.3.6.1.4.1.171.20.1.1.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl210IPPoolTable | 1.3.6.1.4.1.171.20.1.1.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl210IPPoolEntry | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl210IPPoolIndex | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl210IPPoolName | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl210IPPoolPrepare | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl210IPPoolFree | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl210IPPoolMisses | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl210IPPoolClientFails | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl210IPPoolUsed | 1.3.6.1.4.1.171.20.1.1.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl210DHCPServer | 1.3.6.1.4.1.171.20.1.1.1.2.5 | |||
| G32 dfl210DHCPTotalRejected | 1.3.6.1.4.1.171.20.1.1.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl210DHCPRuleTable | 1.3.6.1.4.1.171.20.1.1.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl210DHCPRuleEntry | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl210DHCPRuleIndex | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl210DHCPRuleName | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl210DHCPRuleUsage | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl210DHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl210DHCPActiveClients | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl210DHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl210DHCPRejectedRequests | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl210DHCPTotalLeases | 1.3.6.1.4.1.171.20.1.1.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl210UserAuth | 1.3.6.1.4.1.171.20.1.1.1.2.6 | |||
| G32 dfl210UserAuthHTTPUsers | 1.3.6.1.4.1.171.20.1.1.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl210UserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.1.1.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl210UserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.1.1.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl210UserAuthPPPUsers | 1.3.6.1.4.1.171.20.1.1.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl210UserAuthEAPUsers | 1.3.6.1.4.1.171.20.1.1.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl210UserAuthRuleUseTable | 1.3.6.1.4.1.171.20.1.1.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl210UserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.1.1.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl210UserAuthRuleIndex | 1.3.6.1.4.1.171.20.1.1.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl210UserAuthRuleName | 1.3.6.1.4.1.171.20.1.1.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl210UserAuthRuleUse | 1.3.6.1.4.1.171.20.1.1.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl210LinkMonitor | 1.3.6.1.4.1.171.20.1.1.1.2.7 | |||
| I32 dfl210LinkMonGrp | 1.3.6.1.4.1.171.20.1.1.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl210LinkMonGrpTable | 1.3.6.1.4.1.171.20.1.1.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl210LinkMonGrpEntry | 1.3.6.1.4.1.171.20.1.1.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl210LinkMonGrpIndex | 1.3.6.1.4.1.171.20.1.1.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl210LinkMonGrpName | 1.3.6.1.4.1.171.20.1.1.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl210LinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.1.1.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl210LinkMonHostTable | 1.3.6.1.4.1.171.20.1.1.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl210LinkMonHostEntry | 1.3.6.1.4.1.171.20.1.1.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl210LinkMonHostIndex | 1.3.6.1.4.1.171.20.1.1.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl210LinkMonHostId | 1.3.6.1.4.1.171.20.1.1.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl210LinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.1.1.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl210LinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.1.1.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl210Pipes | 1.3.6.1.4.1.171.20.1.1.1.2.8 | |||
| G32 dfl210PipeUsers | 1.3.6.1.4.1.171.20.1.1.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl210PipeTable | 1.3.6.1.4.1.171.20.1.1.1.2.8.2 | not-accessible | Table of pipes | |
| dfl210PipeEntry | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl210PipeIndex | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl210PipeName | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl210PipeMinPrec | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl210PipeMaxPrec | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl210PipeDefPrec | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl210PipeNumPrec | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl210PipeNumUsers | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl210PipeCurrentBps | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl210PipeCurrentPps | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl210PipeDelayedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl210PipeDropedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl210PipePrecTable | 1.3.6.1.4.1.171.20.1.1.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl210PipePrecEntry | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl210PipePrecIndex | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl210PipePrecEntry. |
| I32 dfl210PipePrec | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl210PipePrecBps | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl210PipePrecTotalPps | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl210PipePrecReservedBps | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl210PipePrecDynLimBps | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl210PipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl210PipePrecDelayedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl210PipePrecDropedPackets | 1.3.6.1.4.1.171.20.1.1.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl210ALG | 1.3.6.1.4.1.171.20.1.1.1.2.9 | |||
| G32 dfl210AlgSessions | 1.3.6.1.4.1.171.20.1.1.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl210AlgConnections | 1.3.6.1.4.1.171.20.1.1.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl210AlgTCPStreams | 1.3.6.1.4.1.171.20.1.1.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl210HttpAlg | 1.3.6.1.4.1.171.20.1.1.1.2.9.4 | |||
| dfl210HttpAlgTable | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl210HttpAlgEntry | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl210HttpAlgIndex | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl210HttpAlgName | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl210HttpAlgTotalRequested | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl210HttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl210HttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl210HttpAlgCntFltTable | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl210HttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl210HttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl210HttpAlgCntFltName | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl210HttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl210HttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl210HttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.1.1.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl210SmtpAlg | 1.3.6.1.4.1.171.20.1.1.1.2.9.5 | |||
| dfl210SmtpAlgTable | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl210SmtpAlgEntry | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl210SmtpAlgIndex | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl210SmtpAlgName | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl210SmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl210SmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl210SmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl210SmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl210SmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl210SmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl210SmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl210SmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl210SmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl210SmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.1.1.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl210DHCPRelay | 1.3.6.1.4.1.171.20.1.1.1.2.11 | |||
| G32 dfl210DHCPRelayCurClients | 1.3.6.1.4.1.171.20.1.1.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl210DHCPRelayCurTrans | 1.3.6.1.4.1.171.20.1.1.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl210DHCPRelayRejected | 1.3.6.1.4.1.171.20.1.1.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl210DHCPRelayRuleTable | 1.3.6.1.4.1.171.20.1.1.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl210DHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl210DHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl210DHCPRelayRuleName | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl210DHCPRelayRuleHits | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl210DHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl210DHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl210DHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.1.1.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl210HA | 1.3.6.1.4.1.171.20.1.1.1.2.12 | |||
| G32 dfl210HASyncSendQueueLength | 1.3.6.1.4.1.171.20.1.1.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl210HASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.1.1.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl210HASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.1.1.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl210HASyncSentPackets | 1.3.6.1.4.1.171.20.1.1.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl210HASyncSendResentPackets | 1.3.6.1.4.1.171.20.1.1.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl210reg | 1.3.6.1.4.1.171.20.1.1.2 | |||
| dfl210MibModules | 1.3.6.1.4.1.171.20.1.1.2.1 | |||
| dfl210_MIB | 1.3.6.1.4.1.171.20.1.1.2.1.2 | The MIB module for D-Link DFL-210 series product. | ||
| dfl210MibConfs | 1.3.6.1.4.1.171.20.1.1.2.2 | |||
| dfl210StatsConformance | 1.3.6.1.4.1.171.20.1.1.2.2.1 | |||
| dfl210StatsCompliance | 1.3.6.1.4.1.171.20.1.1.2.2.1.1 | Module Compliance | ||
| dfl210MibObjectGroups | 1.3.6.1.4.1.171.20.1.1.2.3 | |||
| dfl210StatsRegGroups | 1.3.6.1.4.1.171.20.1.1.2.3.1 | |||
| dfl210SystemObjectGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.1 | System statistics Group | ||
| dfl210IPsecObjectGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.2 | IPsec Group | ||
| dfl210StateCountersGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.3 | Per state counters | ||
| dfl210IPPoolGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.4 | IP pool entry objects group | ||
| dfl210DHCPServerGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.5 | DHCP server rules objects. | ||
| dfl210RuleUseGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.6 | Rule use objects. | ||
| dfl210UserAuthGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.7 | User auth objects. | ||
| dfl210IfStatsGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.8 | DFL-210 interface statistics group. | ||
| dfl210LinkMonitorGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.9 | DFL-210 link monitor statistics group | ||
| dfl210PipesObjectGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.10 | DFL-210 pipes statistics group | ||
| dfl210DHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.12 | DFL-210 DHCP relay statistics group | ||
| dfl210AlgGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.13 | DFL-210 HTTP ALG statistics group | ||
| dfl210HAGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.14 | DFL-210 HA statistics group | ||
| dfl210IfVlanGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.15 | DFL-210 VLAN statistics group | ||
| dfl210SmtpAlgGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl210SysTCPGroup | 1.3.6.1.4.1.171.20.1.1.2.3.1.17 | DFL-210 TCP buffer usage group |
RFC description
Monitors D-Link DFL-210 firewall appliance performance including CPU, memory, and connection statistics.
Start monitoring D-Link DFL-210 NetDefend firewall appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.