ALCATEL-IND1-DOT1X-MIB

All MIBs › ALCATEL-IND1-DOT1X-MIB

Organization: Alcatel-Lucent

Last Updated: 2010-02-10

Category: VPN and Security, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IEEE 802.1X port-based network access control MIB for supplicant authentication management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-DOT1X-MIB?

ALCATEL-IND1-DOT1X-MIB is an Alcatel-Lucent enterprise-specific MIB (alcatelIND1Dot1XMIB, registered under the softentIND1Dot1X branch) that manages IEEE 802.1X port-based network access control on Alcatel-Lucent's 'Birds Of Prey' OmniSwitch product line, extending it into a broader network-access-classification system. Alongside a (now deprecated) legacy per-port supplicant table, alaDot1xPortTable, it defines rich textual conventions for classification and authentication outcomes -- ALADot1xClassificationPolicyType (802.1X, MAC, group-mobility, default-VLAN, block, and multiple captive-portal variants), ALADot1xAuthenticationType, ALADot1xAuthenticationResult, and ALADot1xMacLearntState (bridging, filtering, host-integrity-check-in-progress, QMR-in-progress) -- that describe how each device on a port was classified and whether it is currently permitted onto the network. This lets an operator determine not just whether 802.1X authentication succeeded, but which classification policy (802.1X, MAC auth, captive portal, or a fallback default-VLAN/block rule) actually admitted or blocked a given device. It depends on the standard IEEE8021-PAE-MIB (dot1xPaePortNumber) and IF-MIB for port indexing, and is deployed on OmniSwitch access-layer switches enforcing NAC policy. Administrators can download the ALCATEL-IND1-DOT1X-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-DOT1X-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch (Birds Of Prey product line)

Monitoring Examples

An operator checks alaDot1xSupplicantPolicyUsed for a port reporting failed access to see whether the device fell back to captivePortalBlock or aaaAuthSvrDownBlock; a rising count of ports landing on the RADIUS-down block policies would indicate the authentication server is unreachable rather than a per-device credential problem.

What Can Be Monitored

per-port supplicant/device authentication state
classification policy applied per device (802.1X/MAC/captive portal/default-VLAN/block)
authentication result per device
MAC-learnt state (bridging/filtering/host-check-in-progress)
device type (supplicant vs. non-supplicant)

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Dot1X

OBJECT-IDENTITY

From IEEE8021-PAE-MIB

dot1xPaePortNumber

OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1Dot1XMIB	1.3.6.1.4.1.6486.801.1.2.1.30.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Port Access Entity module for managing 802.1X for the Birds Of Prey Product Line The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alaIND1Dot1XMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.30.1.1			Branch For 802.1X Subsystem Managed Objects.
alaDot1xPortTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1		not-accessible	A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
alaDot1xPortEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1		not-accessible	TP DO: Add description here
INT alaDot1xPortSlotNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.1	INTEGER	read-only	The slot that the logical port represented by the dot1xPaePortNumber resides.
INT alaDot1xPortPortNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.2	INTEGER	read-only	The user port that the logical port represented by the dot1xPaePortNumber resides.
MAC alaDot1xPortMACAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.3	MacAddress	read-only	The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
INT alaDot1xPortVlan	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.4	INTEGER	read-only	The vlan that the supplicant is authorized to access.
INT alaDot1xPortProtocol	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.5	INTEGER	read-only	The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xPortVlan object. Supplicant can be authorized to different vlans for different protocol.
STR alaDot1xPortUserName	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.6	DisplayString	read-only	The user name of the supplicant used for authentication.
INT alaDot1xPortState	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.7	INTEGER	read-only	The State of the port.
ALA alaDot1xSupplicantPolicyUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.8	ALADot1xClassificationPolicyType	read-only	Classification Policy under which the 802.1x supplicant is learned.
alaDot1xPortLookupTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2		not-accessible	A table of which allows to find the logical port number given the physical slot/port/MAC. An entry appears in this table for each logical port of this system.
alaDot1xPortLookupEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1		not-accessible	The translation table to look up the dot1xPaePortNumber.
INT alaDot1xPortLookupSlotNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.1	INTEGER	read-only	The slot that the logical port represented by the dot1xPaePortNumber resides.
INT alaDot1xPortLookupPortNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.2	INTEGER	read-only	The physical port that the logical port represented by the dot1xPaePortNumber resides.
MAC alaDot1xPortLookupMACAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.3	MacAddress	read-only	The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
NUM alaDot1xPortLookupInterfaceNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.4	InterfaceIndex	read-only	The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides.
alaDot1xMacTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4		not-accessible	Provide the list of users currently authenticated into the switch for bridging purpose.
alaDot1xMacEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1		not-accessible	An entry in the AaaAuthenticatedUserTable.
MAC alaDot1xMACAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.1	MacAddress	not-accessible	The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
NUM alaDot1xMacIfIndex	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.2	InterfaceIndex	read-only	Interface index in which alaDot1xMACAddress was learned.
I32 alaDot1xMacSlotNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.3	Integer32	read-only	The slot in which alaDot1xMACAddress was learned.
I32 alaDot1xMacPortNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.4	Integer32	read-only	The user port in which alaDot1xMACAddress was learned.
I32 alaDot1xMacVlan	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.5	Integer32	read-only	The vlan that the supplicant is authorized to access.
I32 alaDot1xMacProtocol	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.6	Integer32	read-only	The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xMacVlan object. Supplicant can be authorized to different vlans for different protocol.
STR alaDot1xMacUserName	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.7	DisplayString	read-only	The user name of the supplicant used for authentication.
INT alaDot1xMacState	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.8	INTEGER	read-only	The State of the port in which the current mac-address was learned.
ALA alaDot1xMacSupplicantPolicyUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.9	ALADot1xClassificationPolicyType	read-only	Classification Policy under which the 802.1x supplicant is learned.
alaDot1xNonSupplicantTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5		not-accessible	A table of non 802.1x supplicants learned on 802.1x authenticated ports.
alaDot1xNonSupplicantEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1		not-accessible	Non 802.1x supplicant information.
NUM alaDot1xNonSupplicantIntfNum	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.1	InterfaceIndex	read-only	The ifIndex represneting the slot and port where the non 802.1x supplicant is learned.
MAC alaDot1xNonSupplicantMACAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.2	MacAddress	read-only	The MAC address of the non 802.1x supplicant.
INT alaDot1xNonSupplicantVlanID	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.3	INTEGER	read-only	The Id of the VLAN on which the non 802.1x supplicant is learned.
ALA alaDot1xNonSupplicantPolicyUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.4	ALADot1xClassificationPolicyType	read-only	Classification policy under which the non 802.1x supplicant is learned.
INT alaDot1xAuthenticationStatus	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.5	INTEGER	read-only	Authentication status of the non 802.1x supplicant.
alaDot1xAuthPolicyTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6		not-accessible	A table of supplicant and non supplicant device classification policies as they are configured on 802.1x authenticated ports.
alaDot1xAuthPolicyEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1		not-accessible	Device classification policies information.
NUM alaDot1xAuthPolicyIntfNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.1	InterfaceIndex	not-accessible	The ifIndex that represnets the slot and port where the device classification policies are configured.
STR alaDot1xNonSuppPolicy	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.2	DisplayString	read-write	MAC based authentication -> M Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C Examples: MGD,GB. The default value is B (block). If the string size is zero (0), the default value is used.
STR alaDot1xSuppPolicy	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.3	DisplayString	read-write	802.1x authentication -> X Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C Default value: XGD,B. If the string size is zero (0), the default value is used.
I32 alaDot1xPollingCnt	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.4	Integer32	read-write	Number of retries to poll the end station for EAPoL frame before classifying the end station with group mobility or guest vlan ID configured. If the value is set to zero (0), it indicates a special case where the port will ignore any EAP frame from the client and this will force all devices to the non-supplicant policy for classification.
STR alaDot1xCaptivePortalPolicy	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.5	DisplayString	read-write	Web authentication -> W Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Default value: XGD,B, if string size is zero, the default value is used.
I32 alaDot1xCPortalSessionLimit	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.6	Integer32	read-write	Captive Portal Session limit is the interval that a Captive Portal user can login. User is to be logged off after the session limit. If the session limit is set to zero (0), it means the session is unlimited, user will not be automatically logged off.
I32 alaDot1xCPortalRetryCnt	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.7	Integer32	read-write	Number of retries for the Captive Portal user to provide the user credential before the software will classify the user to the failed policy according the the alaDot1xCaptivePortalPolicy.
alaDot1xCportalConfig	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7
IP alaDot1xCPortalIpAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.1	IpAddress	read-write	The factory default Captive Portal IP address is 10.123.0.1. If the 10.123.0.0 subnet is already in use, user can change the Captive Portal IP address to another 10.x.0.0 subnet. Only the second octet of the Captive Portal IP address can be changed.
STR alaDot1xCPortalProxyURL	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.2	SnmpAdminString	read-write	The factory default for Captive Portal working with proxy server url has the key word proxy. If the user's proxy server url does not have the key work proxy, user can use this object to specify the proxy server url. If none is specified this object will return the default value - proxy.
STR alaDot1xCPortalPostAuthSuccessRedirectURL	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.3	SnmpAdminString	read-write	Captive Portal's Redirect URL upon successful authentication.
STR alaDot1xCPortalPostAuthFailRedirectURL	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.4	SnmpAdminString	read-write	Captive Portal's Redirect URL upon failed authentication.
STR alaDot1xCPortalDNSKeyword1	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.5	SnmpAdminString	read-write	Captive Portal's DNS keyword string.
STR alaDot1xCPortalDNSKeyword2	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.6	SnmpAdminString	read-write	Captive Portal's DNS keyword string.
STR alaDot1xCPortalDNSKeyword3	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.7	SnmpAdminString	read-write	Captive Portal's DNS keyword string.
STR alaDot1xCPortalDNSKeyword4	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.8	SnmpAdminString	read-write	Captive Portal's DNS keyword string.
alaDot1xDeviceStatusTable	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8		not-accessible	A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
alaDot1xDeviceStatusEntry	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1		not-accessible	One entry of the Device Status Table.
ALA alaDot1xDeviceStatusMacQueryType	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.1	ALADot1xMacQueryType	not-accessible	The type of MAC address to query.
INT alaDot1xDeviceStatusSlotNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.2	INTEGER	not-accessible	The slot that the device reporting the status resides.
INT alaDot1xDeviceStatusPortNumber	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.3	INTEGER	not-accessible	The user port that the device reporting the status resides.
MAC alaDot1xDeviceStatusMACAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.4	MacAddress	not-accessible	The MAC address of the device reporting the status.
ALA alaDot1xDeviceStatusDeviceType	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.5	ALADot1xDeviceType	not-accessible	The type of device. Either supplicant or non-supplicant.
INT alaDot1xDeviceStatusVlan	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.6	INTEGER	read-only	The vlan that the device reporting the status is authorized to access.
IP alaDot1xDeviceStatusIPAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.7	IpAddress	read-only	The IP address of the device reporting the status.
STR alaDot1xDeviceStatusUserName	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.8	SnmpAdminString	read-only	The user name of the device reporting the status.
STR alaDot1xDeviceStatusProfileUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.9	SnmpAdminString	read-only	The name of the User Network Profile entry used when the device reporting the status is classified.
ALA alaDot1xDeviceStatusAuthType	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.10	ALADot1xAuthenticationType	read-only	The type of authentication used by the device reporting the status to obtain network access.
ALA alaDot1xDeviceStatusPolicyUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.11	ALADot1xClassificationPolicyType	read-only	Classification Policy under which the device is learned.
ALA alaDot1xDeviceStatusAuthResult	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.12	ALADot1xAuthenticationResult	read-only	The State of the port.
ALA alaDot1xDeviceStatusMacLearntState	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.13	ALADot1xMacLearntState	read-only	The State of the MAC classified in the switch.
TIM alaDot1xDeviceStatusTimeLearned	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.14	TimeStamp	read-only	The time that the MAC address is learned in the system.
T/F alaDot1xDeviceStatusCaptivePortalUsed	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.15	TruthValue	read-only	The object indicates if the device is classified in the system using Captive Portal. A value of True means that the device has used Captive Portal to authenticate its credential and a value of False means that the device has not used Captive Portal to authenticate its credential.
alaDot1xAdminLogoutParams	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9
INT alaDot1xAdminLogoutType	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.1	INTEGER	read-write	When this variable is set, the switch is to logout the user based on the logout type. The associated MIB object should be correctly set based on the logout type. If the corresponding MIB object that contain the criteria is not set correctly the switch will not be able to perform the logout operation. After the logout operation is done, the switch will set the corresponding criteria to back to its default value. Also when the logout operation is done, the switch is to set this variable back to zero (0).
MAC alaDot1xAdminLogoutMacAddress	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.2	MacAddress	read-write	This value is used only if alaDot1xAdminLogoutType is set to MAC address. The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC address will not be learned by the switch. The switch will reset this to the default value after the logout operation is performed
STR alaDot1xAdminLogoutUserName	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.3	SnmpAdminString	read-write	This value is used only if alaDot1xAdminLogoutType is set to username. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL.
STR alaDot1xAdminLogoutNetworkProfileName	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.4	SnmpAdminString	read-write	This value is used only if alaDot1xAdminLogoutType is set to networkprofilename. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL.
NUM alaDot1xAdminLogoutInterfaceId	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.5	InterfaceIndexOrZero	read-write	This value is used only if alaDot1xAdminLogoutType is set to interfaceId. The default value is zero (0). The switch will reset this to the default value after the logout operation is performed.
alaDot1xAuthServerTimeout	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10
STR alaDot1xAuthSvrTimeoutPolicy	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.1	DisplayString	read-write	Block -> B User Network Profile -> 'user network profile name' Default value is B.
I32 alaDot1xAuthSvrTimeoutReAuthPeriod	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.2	Integer32	read-write	This is the time interval in second that the supplicant is to be classified according to the Auth Server Down Policy (alaDot1xAuthServerTimeoutPolicy). When this time is expired, the supplicant will be prompted to re-authenticate and see if the Auth Server is back up. The default value is 30 seconds.
INT alaDot1xAuthSvrTimeoutStatus	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.3	INTEGER	read-write	This is object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy and alaDot1xAuthSvrTimeoutReAuthPeriod. Default is disabled.
alaPassthroughConfig	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11
ALA alaDot1xPassthroughStatus	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.1	AlaPassThroughStatus	read-write	Passthrough of 802.1x packets. Force the 802.1x packet to flood in the VLAN.
ALA alaAvlanPassthroughStatus	1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.2	AlaPassThroughStatus	read-write	Passthrough of AVLAN packets. Force the AVLAN packet to flood in the VLAN.
alaIND1Dot1XMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.30.1.2			Branch For 802.1X Subsystem Conformance Information.
alaIND1Dot1XMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1			Branch For 802.1X Subsystem Units Of Conformance.
alaINDDot1XPortGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.1			Collection of 802.1x objects for port status.
alaDot1xPortLookupGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.2			Collection of 802.1x objects for port lookup.
alaINDDot1XPolicyGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.3			Collection of 802.1x objects for supplicant and non-supplicant policies.
alaINDDot1XDeviceStatusGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.4			Collection of 802.1x objects for the status of the devices on an 802.1X enable port.
alaDot1xAuthSvrTimeoutGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.5			Collection of 802.1x objects for the Authentication Server Timeout.
alaPassthroughConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.6			Status of passthrough for 802.1x and avlan configuration in devices.
alaIND1Dot1XMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.30.1.2.2			Compliance statement for Alcatel 802.1x.

RFC description

Alcatel-Lucent proprietary MIB for IEEE 802.1X port-based network access control on OmniSwitch equipment. Defines management objects for 802.1X authentication policies, accounting configuration, and PKI agent settings.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-DOT1X-MIB

What Is ALCATEL-IND1-DOT1X-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description