All MIBs › HH3C-DVPN-MIB
Organization: Hangzhou H3C Tech. Co., Ltd.
Last Updated: 2005-07-01
Category: VPN and Security, Vendor: H3C/HH3C
Description: Manages Dynamic VPN (DVPN) tunnels and hub-spoke topology configuration on H3C routers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-DVPN-MIB?
HH3C-DVPN-MIB is an H3C (New H3C Technologies) proprietary MIB managing DVPN (Dynamic Virtual Private Network), a dynamic hub-spoke VPN technology for router-to-router tunnels. Its objects cover a service-enable flag, class/client/domain/map/session counts, map-age time, client-registration interval/dumb-mode/retry, input/drop/output/output-error/encrypt-error packet counts, current device role, server pre-shared key, map/session trap enables, DVPN version, clear-all-connections and clear-station-info actions, total-redirect count, and global authentication client type/AAA domain. As a configuration/performance MIB it lets an administrator confirm a DVPN client's registration status and watch drop/encrypt-error packet counts for tunnel problems. It is deployed on H3C (3Com/Huawei) routers using DVPN. Engineers can download the HH3C-DVPN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-DVPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C (3Com/Huawei) routers (DVPN)
Monitoring Examples
An administrator checks hh3cDvpnDropPkt and hh3cDvpnEncryptErrorPkt to diagnose a DVPN tunnel dropping traffic due to an encryption mismatch on an H3C router.
What Can Be Monitored
- DVPN client registration status and packet error counters
This MIB depends on
Related MIBs
Imported Objects
From HH3C-OID-MIB
| hh3cCommon | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cDvpn | 1.3.6.1.4.1.25506.2.57 | This MIB is Dynamic Virtual Private Network(Dvpn) mib. This MIB is applicable to router. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. | ||
| hh3cDvpnMibObjects | 1.3.6.1.4.1.25506.2.57.1 | |||
| hh3cDvpnMibGlobal | 1.3.6.1.4.1.25506.2.57.1.1 | |||
| INT hh3cDvpnServiceEnable | 1.3.6.1.4.1.25506.2.57.1.1.1 | INTEGER | read-write | Dvpn service enable or disable. If dvpn service is 'disable', dvpn service can not be used. |
| I32 hh3cDvpnClassNumber | 1.3.6.1.4.1.25506.2.57.1.1.2 | Integer32 | read-only | The number of dvpn classes. It is only used on client. |
| I32 hh3cDvpnClientNumber | 1.3.6.1.4.1.25506.2.57.1.1.3 | Integer32 | read-only | The number of clients which register on the server. When a session of server to client type is built, add 1 to the value of this node. It is only used on server. |
| I32 hh3cDvpnMapAgeTime | 1.3.6.1.4.1.25506.2.57.1.1.4 | Integer32 | read-write | Dvpn map age time, the unit is second. It is only used on server. |
| I32 hh3cDvpnClientRegisterInterval | 1.3.6.1.4.1.25506.2.57.1.1.5 | Integer32 | read-write | The length of time between the registering of client, the unit is second. It is only used on client. |
| I32 hh3cDvpnClientRegisterDumb | 1.3.6.1.4.1.25506.2.57.1.1.6 | Integer32 | read-write | The length of time when client dumbs, the unit is second. It is only used on client. |
| I32 hh3cDvpnClientRegisterRetry | 1.3.6.1.4.1.25506.2.57.1.1.7 | Integer32 | read-write | Regist retry times of client after register fail. It is only used on client. |
| U32 hh3cDvpnInputPkt | 1.3.6.1.4.1.25506.2.57.1.1.8 | Unsigned32 | read-only | The number of recieved packets. |
| U32 hh3cDvpnDropPkt | 1.3.6.1.4.1.25506.2.57.1.1.9 | Unsigned32 | read-only | The number of packets have been droped. |
| U32 hh3cDvpnOutputPkt | 1.3.6.1.4.1.25506.2.57.1.1.10 | Unsigned32 | read-only | The number of packets have been sent. |
| U32 hh3cDvpnOutputErrorPkt | 1.3.6.1.4.1.25506.2.57.1.1.11 | Unsigned32 | read-only | The number of output error packets. |
| U32 hh3cDvpnEncryptErrorPkt | 1.3.6.1.4.1.25506.2.57.1.1.12 | Unsigned32 | read-only | The number of packets have been encrypted wrongly. |
| INT hh3cDvpnCurrentDeviceRole | 1.3.6.1.4.1.25506.2.57.1.1.13 | INTEGER | read-only | The current role of the device. The value is decided by the configuration of the tunnel-interface. |
| I32 hh3cDvpnDomainNumber | 1.3.6.1.4.1.25506.2.57.1.1.14 | Integer32 | read-only | The number of dvpn domains. |
| I32 hh3cDvpnMapNumber | 1.3.6.1.4.1.25506.2.57.1.1.15 | Integer32 | read-only | The number of dvpn maps. |
| I32 hh3cDvpnSessionNumber | 1.3.6.1.4.1.25506.2.57.1.1.16 | Integer32 | read-only | The number of dvpn sessiones including the session of all states. |
| OCT hh3cDvpnServerPreSharedKey | 1.3.6.1.4.1.25506.2.57.1.1.17 | OCTET STRING | read-write | The pre-shared-key of server. It is only used on server. |
| INT hh3cDvpnMapTrapEnable | 1.3.6.1.4.1.25506.2.57.1.1.18 | INTEGER | read-write | Dvpn map trap enable or disable. |
| INT hh3cDvpnSessionTrapEnable | 1.3.6.1.4.1.25506.2.57.1.1.19 | INTEGER | read-write | Dvpn session trap enable or disable. |
| INT hh3cDvpnVersion | 1.3.6.1.4.1.25506.2.57.1.1.20 | INTEGER | read-only | Dvpn version. |
| I32 hh3cDvpnClearDomainAllConection | 1.3.6.1.4.1.25506.2.57.1.1.21 | Integer32 | read-write | Clear all dvpn conects in the domain, the parameter is the id of the domain. |
| I32 hh3cDvpnClearDvpnStaInfo | 1.3.6.1.4.1.25506.2.57.1.1.22 | Integer32 | read-write | Clear the statistic information of dvpn. |
| U32 hh3cDvpnTotalRedirectNumber | 1.3.6.1.4.1.25506.2.57.1.1.23 | Unsigned32 | read-only | The number of redirect packets. It is only used on server. |
| INT hh3cDvpnGlobalAuthenClientType | 1.3.6.1.4.1.25506.2.57.1.1.24 | INTEGER | read-write | Dvpn global authentication type being used by server to client. The value is decided by the configuration by the user. |
| OCT hh3cDvpnGlobalUserDefAAADomain | 1.3.6.1.4.1.25506.2.57.1.1.25 | OCTET STRING | read-write | Dvpn global AAA domain of the user. The domain will decide the authentication server which is used by the dvpn server to authenticate dvpn client. |
| OCT hh3cDvpnLocalDeviceId | 1.3.6.1.4.1.25506.2.57.1.1.26 | OCTET STRING | read-only | The device ID, it is a string. |
| I32 hh3cDvpnSessionHisAgeTime | 1.3.6.1.4.1.25506.2.57.1.1.27 | Integer32 | read-write | The age-time of the hh3cDvpnSessionHisTable table. The unit is hour. |
| INT hh3cDvpnSessionHisReset | 1.3.6.1.4.1.25506.2.57.1.1.28 | INTEGER | read-write | The reset flag of dvpn hh3cDvpnSessionHisTable table. |
| hh3cDvpnMibTableTroop | 1.3.6.1.4.1.25506.2.57.1.2 | |||
| hh3cDvpnPolicyTable | 1.3.6.1.4.1.25506.2.57.1.2.1 | not-accessible | The dvpn policy table. It is used on dvpn server. | |
| hh3cDvpnPolicyEntry | 1.3.6.1.4.1.25506.2.57.1.2.1.1 | not-accessible | The entry of hh3cDvpnPolicyTable. | |
| OCT hh3cDvpnPolicyName | 1.3.6.1.4.1.25506.2.57.1.2.1.1.1 | OCTET STRING | not-accessible | The name of Dvpn policy. |
| INT hh3cDvpnPoAuthenClientType | 1.3.6.1.4.1.25506.2.57.1.2.1.1.2 | INTEGER | read-create | The authentication type used by server to client. The value is decided by the policy configuration of the user. The default value is none. |
| DVP hh3cDvpnPoSessionAlgorithmSuite | 1.3.6.1.4.1.25506.2.57.1.2.1.1.3 | DvpnAlgorithmSuite | read-create | The algorithm suite used when session is created. |
| I32 hh3cDvpnPoSessionIdleTime | 1.3.6.1.4.1.25506.2.57.1.2.1.1.4 | Integer32 | read-create | The session idle time, the unit is second. |
| I32 hh3cDvpnPoSessionKeepTime | 1.3.6.1.4.1.25506.2.57.1.2.1.1.5 | Integer32 | read-create | The session keepalive time, the unit is second. |
| I32 hh3cDvpnPoSessionSetupInterval | 1.3.6.1.4.1.25506.2.57.1.2.1.1.6 | Integer32 | read-create | The session setup interval time, the unit is second. |
| DVP hh3cDvpnPoDataAlgorithmSuite | 1.3.6.1.4.1.25506.2.57.1.2.1.1.7 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the session for createing ipsec sa. |
| I32 hh3cDvpnPoSaSeconds | 1.3.6.1.4.1.25506.2.57.1.2.1.1.8 | Integer32 | read-create | The duration of DVPN IPSec security association. The unit is second. |
| OCT hh3cDvpnPoUserDefAAADomain | 1.3.6.1.4.1.25506.2.57.1.2.1.1.9 | OCTET STRING | read-create | Dvpn policy AAA domain of the user. The domain will decide the authentication server which used by the dvpn server to authenticate dvpn client. |
| I32 hh3cDvpnPoRefTimes | 1.3.6.1.4.1.25506.2.57.1.2.1.1.10 | Integer32 | read-only | The total times of the policy being used by dvpn. |
| ROW hh3cDvpnPoRowStatus | 1.3.6.1.4.1.25506.2.57.1.2.1.1.11 | RowStatus | read-create | The status of this conceptual row. We support the characteristic of active(1),createAndGo(4),destroy(6). |
| hh3cDvpnDomainInfoTable | 1.3.6.1.4.1.25506.2.57.1.2.2 | not-accessible | The dvpn domain table. | |
| hh3cDvpnDomainInfoEntry | 1.3.6.1.4.1.25506.2.57.1.2.2.1 | not-accessible | The entry of hh3cDvpnDomainInfoTable. | |
| I32 hh3cDvpnDomainID | 1.3.6.1.4.1.25506.2.57.1.2.2.1.1 | Integer32 | not-accessible | Dvpn domain ID. |
| U32 hh3cDvpnDomainSessionNum | 1.3.6.1.4.1.25506.2.57.1.2.2.1.2 | Unsigned32 | read-only | The number of session in this dvpn domain. |
| U32 hh3cDvpnDomainRedirectNum | 1.3.6.1.4.1.25506.2.57.1.2.2.1.3 | Unsigned32 | read-only | The number of redirect packets in this dvpn domain. |
| U32 hh3cDvpnDomainInputPkt | 1.3.6.1.4.1.25506.2.57.1.2.2.1.4 | Unsigned32 | read-only | The number of input packets in this dvpn domain. |
| U32 hh3cDvpnDomainDropPkt | 1.3.6.1.4.1.25506.2.57.1.2.2.1.5 | Unsigned32 | read-only | The number of drop packets in this dvpn domain. |
| U32 hh3cDvpnDomainOutputPkt | 1.3.6.1.4.1.25506.2.57.1.2.2.1.6 | Unsigned32 | read-only | The number of output packets in this dvpn domain. |
| U32 hh3cDvpnDomainOutputErrorPkt | 1.3.6.1.4.1.25506.2.57.1.2.2.1.7 | Unsigned32 | read-only | The number of output error packets in this dvpn domain. |
| U32 hh3cDvpnDomainEncryptErrorPkt | 1.3.6.1.4.1.25506.2.57.1.2.2.1.8 | Unsigned32 | read-only | The number of encrypt error packets in this dvpn domain. |
| hh3cDvpnClassTable | 1.3.6.1.4.1.25506.2.57.1.2.3 | not-accessible | The Dvpn class table. It is only used on dvpn client. | |
| hh3cDvpnClassEntry | 1.3.6.1.4.1.25506.2.57.1.2.3.1 | not-accessible | The entry of the hh3cDvpnClassTable. | |
| OCT hh3cDvpnClassName | 1.3.6.1.4.1.25506.2.57.1.2.3.1.1 | OCTET STRING | not-accessible | The dvpn class name. It is the index of hh3cDvpnClassTable. |
| IPt hh3cDvpnClServerPublicIpType | 1.3.6.1.4.1.25506.2.57.1.2.3.1.2 | InetAddressType | read-create | Dvpn server public ip type (ipv4, ipv6). |
| IP hh3cDvpnClServerPublicIp | 1.3.6.1.4.1.25506.2.57.1.2.3.1.3 | InetAddress | read-create | Dvpn server public ip address. |
| IPt hh3cDvpnClServerPriIpType | 1.3.6.1.4.1.25506.2.57.1.2.3.1.4 | InetAddressType | read-create | Dvpn server private ip type (ipv4, ipv6). |
| IP hh3cDvpnClServerPriIp | 1.3.6.1.4.1.25506.2.57.1.2.3.1.5 | InetAddress | read-create | Dvpn server private ip address. |
| DVP hh3cDvpnClAlgorithmSuite | 1.3.6.1.4.1.25506.2.57.1.2.3.1.6 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the client when sending registry packets to the server. 'dvpnAlgorithmNone' is not supported here. |
| INT hh3cDvpnClAuthenServerType | 1.3.6.1.4.1.25506.2.57.1.2.3.1.7 | INTEGER | read-create | The authentication type being used by client to server. The value is decided by the class configuration of the user. The default value is none. |
| OCT hh3cDvpnClPreShareKey | 1.3.6.1.4.1.25506.2.57.1.2.3.1.8 | OCTET STRING | read-create | Dvpn PreShareKey. It is used when the method used by client when authenticating server is pre-share-key, only when the value of the key is the same as that on the server, the client can authenticate server successfully. |
| OCT hh3cDvpnClUserName | 1.3.6.1.4.1.25506.2.57.1.2.3.1.9 | OCTET STRING | read-create | Dvpn UserName. It is configured by the user. |
| INT hh3cDvpnClPwdEncrypted | 1.3.6.1.4.1.25506.2.57.1.2.3.1.10 | INTEGER | read-create | Dvpn password encrypted or not. |
| OCT hh3cDvpnClPasswd | 1.3.6.1.4.1.25506.2.57.1.2.3.1.11 | OCTET STRING | read-create | Dvpn password. It is configured by the user. |
| ROW hh3cDvpnClassRowStatus | 1.3.6.1.4.1.25506.2.57.1.2.3.1.12 | RowStatus | read-create | The status of this conceptual row. Only 'active', 'createAndGo' and 'destroy' are supported. |
| hh3cDvpnTunnelTable | 1.3.6.1.4.1.25506.2.57.1.2.4 | not-accessible | The dvpn tunnel table. | |
| hh3cDvpnTunnelEntry | 1.3.6.1.4.1.25506.2.57.1.2.4.1 | not-accessible | The Entry of hh3cDvpnTunnelTable. | |
| INT hh3cDvpnTunnelInterfaceType | 1.3.6.1.4.1.25506.2.57.1.2.4.1.1 | INTEGER | read-write | The type of dvpn tunnel (client or server). |
| I32 hh3cDvpnTunnelAcl | 1.3.6.1.4.1.25506.2.57.1.2.4.1.2 | Integer32 | read-write | The security acl used by the tunnel. If a packet permits the rules, it will not be encrypted. |
| INT hh3cDvpnTunnelClientRegType | 1.3.6.1.4.1.25506.2.57.1.2.4.1.3 | INTEGER | read-write | The register type used by the client . Only the interface type is client, it can be used. undistributed: If a client send a packet to the client with this configuration, setver will only forward the packet whitout sending redirect packets. forward: The client with this configuration will only send packets forwarded by server, which means it can not initiate to build a session with other clients. undistributedandforward: The client with this configuration have the characteristics of both 'forward' and 'undistributed'. normal: The client with this configuration can build session with other clients without any restriction. |
| I32 hh3cDvpnTunnelDvpnId | 1.3.6.1.4.1.25506.2.57.1.2.4.1.4 | Integer32 | read-write | The dvpn ID used by the tunnel. The dvpn ID is 0 means that user does not configure dvpn ID. User can not configure a dvpn ID with 0. |
| OCT hh3cDvpnTunnelPolicy | 1.3.6.1.4.1.25506.2.57.1.2.4.1.5 | OCTET STRING | read-write | The dvpn policy used by the tunnel. Only the interface type is server, it can be used. |
| OCT hh3cDvpnTunnelClass | 1.3.6.1.4.1.25506.2.57.1.2.4.1.6 | OCTET STRING | read-write | The dvpn class used by the tunnel. Only the interface type is client, it can be used. |
| hh3cDvpnMapTable | 1.3.6.1.4.1.25506.2.57.1.2.5 | not-accessible | The dvpn map table. | |
| hh3cDvpnMapEntry | 1.3.6.1.4.1.25506.2.57.1.2.5.1 | not-accessible | The entry of the hh3cDvpnMapTable. | |
| U32 hh3cDvpnMapIndex | 1.3.6.1.4.1.25506.2.57.1.2.5.1.1 | Unsigned32 | accessible-for-notify | The index of hh3cDvpnMapTable. |
| OCT hh3cDvpnMapPeerDeviceId | 1.3.6.1.4.1.25506.2.57.1.2.5.1.2 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| U32 hh3cDvpnMapDvpnId | 1.3.6.1.4.1.25506.2.57.1.2.5.1.3 | Unsigned32 | read-only | The ID of the dvpn domain which the map belongs to. The dvpn ID is 0 means that the map has not been built. It has not gotten the dvpn ID at that time. |
| TIK hh3cDvpnMapBuildTime | 1.3.6.1.4.1.25506.2.57.1.2.5.1.4 | TimeTicks | read-only | The time of the map created, the unit is second. |
| IPt hh3cDvpnMapPeerPriIpType | 1.3.6.1.4.1.25506.2.57.1.2.5.1.5 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map peer device. |
| IP hh3cDvpnMapPeerPriIp | 1.3.6.1.4.1.25506.2.57.1.2.5.1.6 | InetAddress | read-only | The private ip of map peer device. |
| IPt hh3cDvpnMapPeerPublicIpType | 1.3.6.1.4.1.25506.2.57.1.2.5.1.7 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map peer device. |
| IP hh3cDvpnMapPeerPublicIp | 1.3.6.1.4.1.25506.2.57.1.2.5.1.8 | InetAddress | read-only | The public ip of map peer device. |
| IPt hh3cDvpnMapLocalPriIpType | 1.3.6.1.4.1.25506.2.57.1.2.5.1.9 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map local device. |
| IP hh3cDvpnMapLocalPriIp | 1.3.6.1.4.1.25506.2.57.1.2.5.1.10 | InetAddress | read-only | The private ip of map local device. |
| IPt hh3cDvpnMapLocalPublicIpType | 1.3.6.1.4.1.25506.2.57.1.2.5.1.11 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map local device. |
| IP hh3cDvpnMapLocalPublicIp | 1.3.6.1.4.1.25506.2.57.1.2.5.1.12 | InetAddress | read-only | The public ip of map local device. |
| OCT hh3cDvpnMapUserName | 1.3.6.1.4.1.25506.2.57.1.2.5.1.13 | OCTET STRING | read-only | The user name used by the client registering to server. If the client is not been authenticated, this is a null string. |
| I32 hh3cDvpnMapUdpPort | 1.3.6.1.4.1.25506.2.57.1.2.5.1.14 | Integer32 | read-only | The udp port used by map peer device. |
| U32 hh3cDvpnMapControlId | 1.3.6.1.4.1.25506.2.57.1.2.5.1.15 | Unsigned32 | read-only | Dvpn map control ID. |
| DVP hh3cDvpnMapType | 1.3.6.1.4.1.25506.2.57.1.2.5.1.16 | DvpnCommunicateType | read-only | The type of the map. 'clientToclient' is not supported here. |
| INT hh3cDvpnMapState | 1.3.6.1.4.1.25506.2.57.1.2.5.1.17 | INTEGER | read-only | mapClientInit: The client initiates the map. mapClientBegin: The client begins the process of registering to the server. mapClientAlgreq: The client requests to negotiate the algorithm. mapClientKexReq: The client requests to negotiate the key. mapClientAuthenReq: The client sends authentication information to the server. mapClientConfigReq: The client requests to get some configuration information from the server. Do not support now. mapClientReq: The client requests to register to the server. mapClientSuccess: The client registers to the server successfully. mapServerBegin: The server begins the process of receive a new register. mapServerAlgorithm:The sever begins to negotiate Algorithm. mapServerKexInit: The server replys to the algorithm negotiation packet from the client successfully and begin to negotiate key. mapServerAuthenInit: The server replys to the key negotiation packet from the client successfully and begin to authenticate client, in the case of the authentication-client method is not none. mapServerConfigInit: The server send some configuration information to client. Do not support now. mapServerInit: The server replys to the authentication packet from the client successfully and begin to receive client information. mapServerFinished: The server receives client information successfully. |
| hh3cDvpnSessionTable | 1.3.6.1.4.1.25506.2.57.1.2.6 | not-accessible | The dvpn session table. | |
| hh3cDvpnSessionEntry | 1.3.6.1.4.1.25506.2.57.1.2.6.1 | not-accessible | The entry of hh3cDvpnSessionTable. | |
| I32 hh3cDvpnSessionDvpnId | 1.3.6.1.4.1.25506.2.57.1.2.6.1.1 | Integer32 | accessible-for-notify | The ID of the dvpn domain which the session belongs to. |
| IPt hh3cDvpnSessionPeerPriIpType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.2 | InetAddressType | accessible-for-notify | The private ip type (ipv4, ipv6) of session peer device. |
| IP hh3cDvpnSessionPeerPriIp | 1.3.6.1.4.1.25506.2.57.1.2.6.1.3 | InetAddress | accessible-for-notify | The private ip of the session peer device. |
| OCT hh3cDvpnSessionPeerDeviceId | 1.3.6.1.4.1.25506.2.57.1.2.6.1.4 | OCTET STRING | read-only | The device ID of session peer device. It is a string. |
| TIK hh3cDvpnSessionBuildTime | 1.3.6.1.4.1.25506.2.57.1.2.6.1.5 | TimeTicks | read-only | The time of the Session being built, the unit is second. |
| IPt hh3cDvpnSessionPeerPubIpType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.6 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session peer device. |
| IP hh3cDvpnSessionPeerPubIp | 1.3.6.1.4.1.25506.2.57.1.2.6.1.7 | InetAddress | read-only | The public ip of session peer device. |
| IPt hh3cDvpnSessionLocalPubIpType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.8 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session local device. |
| IP hh3cDvpnSessionLocalPubIp | 1.3.6.1.4.1.25506.2.57.1.2.6.1.9 | InetAddress | read-only | The public ip of session local device. |
| IPt hh3cDvpnSessionLocalPriIpType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.10 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session local device. |
| IP hh3cDvpnSessionLocalPriIp | 1.3.6.1.4.1.25506.2.57.1.2.6.1.11 | InetAddress | read-only | The private ip of session local device. |
| I32 hh3cDvpnSessionPeerUdpPort | 1.3.6.1.4.1.25506.2.57.1.2.6.1.12 | Integer32 | read-only | The udp port used by session peer device . |
| INT hh3cDvpnSessionInitiator | 1.3.6.1.4.1.25506.2.57.1.2.6.1.13 | INTEGER | read-only | The flag of initiator. |
| OCT hh3cDvpnSessionUserName | 1.3.6.1.4.1.25506.2.57.1.2.6.1.14 | OCTET STRING | read-only | The user's name. If the session type is client to client, the value of this object is a null string. |
| INT hh3cDvpnSessionState | 1.3.6.1.4.1.25506.2.57.1.2.6.1.15 | INTEGER | read-only | The state of the session. sessionSetupInit: The initiation of the session. sessionSetupReq: The initiator requests to negotiate the SA and so on of the session. sessionSetupSuccess: The session has been built successfully. sessionRekeyReq: The initiator requests to renegotiate the SA. sessionRekeyRep: The passive side replies with a SA renegotiation response packet successfully. |
| DVP hh3cDvpnSessionType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.16 | DvpnCommunicateType | read-only | The type of the session. |
| INT hh3cDvpnSessionPeerType | 1.3.6.1.4.1.25506.2.57.1.2.6.1.17 | INTEGER | read-only | The type of the session peer device. It may be client software or a router. |
| hh3cDvpnSessionHisTable | 1.3.6.1.4.1.25506.2.57.1.2.7 | not-accessible | The dvpn session history table. This table contains session's history information, include input/output packet number, up/down time, etc. This table will exist during the 'hh3cDvpnSessionHisAgeTime'. | |
| hh3cDvpnSessionHisEntry | 1.3.6.1.4.1.25506.2.57.1.2.7.1 | not-accessible | The entry of hh3cDvpnSessionHisTable. | |
| I32 hh3cDvpnSessionHisDvpnID | 1.3.6.1.4.1.25506.2.57.1.2.7.1.1 | Integer32 | not-accessible | The ID of the dvpn domain which the session belongs to. |
| IPt hh3cDvpnSessionHisPeerPriIPType | 1.3.6.1.4.1.25506.2.57.1.2.7.1.2 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session peer device. |
| IP hh3cDvpnSessionHisPeerPriIP | 1.3.6.1.4.1.25506.2.57.1.2.7.1.3 | InetAddress | not-accessible | The private ip of the session peer device. |
| U32 hh3cDvpnSessionHisSendPkt | 1.3.6.1.4.1.25506.2.57.1.2.7.1.4 | Unsigned32 | read-only | The number of sent packets on the session. |
| U32 hh3cDvpnSessionHisRcvPkt | 1.3.6.1.4.1.25506.2.57.1.2.7.1.5 | Unsigned32 | read-only | The number of received packets on the session. |
| U32 hh3cDvpnSessionHisOnlineNumber | 1.3.6.1.4.1.25506.2.57.1.2.7.1.6 | Unsigned32 | read-only | The number of the session online. |
| TIK hh3cDvpnSessionHisFirstUpTime | 1.3.6.1.4.1.25506.2.57.1.2.7.1.7 | TimeTicks | read-only | The session first online time. |
| TIK hh3cDvpnSessionHisLastUpTime | 1.3.6.1.4.1.25506.2.57.1.2.7.1.8 | TimeTicks | read-only | The session last online time. |
| TIK hh3cDvpnSessionHisLastDownTime | 1.3.6.1.4.1.25506.2.57.1.2.7.1.9 | TimeTicks | read-only | The session last down time. |
| INT hh3cDvpnSessionHisOnlineFlag | 1.3.6.1.4.1.25506.2.57.1.2.7.1.10 | INTEGER | read-only | If the session is online, the value is 'yes'. If the session is not online, the value is 'no'. |
| OCT hh3cDvpnSessionHisPeerDeviceId | 1.3.6.1.4.1.25506.2.57.1.2.7.1.11 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| hh3cDvpnMibNotification | 1.3.6.1.4.1.25506.2.57.1.3 | |||
| hh3cDvpnNotification | 1.3.6.1.4.1.25506.2.57.1.3.0 | |||
| NTF hh3cDvpnSessionBuildNotification | 1.3.6.1.4.1.25506.2.57.1.3.0.1 | Dvpn session build notification. | ||
| NTF hh3cDvpnSessionDelNotification | 1.3.6.1.4.1.25506.2.57.1.3.0.2 | Dvpn session deleted notification. | ||
| NTF hh3cDvpnMapBuildNotification | 1.3.6.1.4.1.25506.2.57.1.3.0.3 | Dvpn map build notification. | ||
| NTF hh3cDvpnMapDelNotification | 1.3.6.1.4.1.25506.2.57.1.3.0.4 | Dvpn map deleted notification. | ||
| hh3cDvpnMibConformance | 1.3.6.1.4.1.25506.2.57.1.4 | |||
| hh3cDvpnMibCompliances | 1.3.6.1.4.1.25506.2.57.1.4.1 | |||
| hh3cDvpnMibCompliance | 1.3.6.1.4.1.25506.2.57.1.4.1.1 | The compliance statement for entities which implement the DVPN MIB. | ||
| hh3cDvpnMibGroups | 1.3.6.1.4.1.25506.2.57.1.4.2 | |||
| hh3cDvpnGlobalGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.1 | A collection of objects providing dvpn global information. | ||
| hh3cDvpnPolicyGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.2 | A collection of objects providing dvpn policy information. | ||
| hh3cDvpnDomainInfoGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.3 | A collection of objects providing dvpn domain information. | ||
| hh3cDvpnClassGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.4 | A collection of objects providing dvpn class information. | ||
| hh3cDvpnTunnelGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.5 | A collection of objects providing dvpn tunnel interface information. | ||
| hh3cDvpnMapGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.6 | A collection of objects providing dvpn map information. | ||
| hh3cDvpnSessionGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.7 | A collection of objects providing dvpn session information. | ||
| hh3cDvpnSessionHisGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.8 | A collection of objects providing dvpn session history information. | ||
| hh3cDvpnNotificationGroup | 1.3.6.1.4.1.25506.2.57.1.4.2.9 | A collection of objects providing dvpn notification information. |
RFC description
Manages Dynamic Virtual Private Network (DVPN) configuration on H3C routers including IPSec algorithm suites and tunnel parameters.
Start monitoring H3C router (Dynamic VPN hub-and-spoke tunnels) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.