CXFLT-IPX-MIB

All MIBs › CXFLT-IPX-MIB

Category: IP and Core Protocols, VPN and Security, Vendor: Aastra

Description: Configures Aastra IPX traffic filtering rules and access control lists for Novell protocol filtering.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXFLT-IPX-MIB?

CXFLT-IPX-MIB is a small private MIB (built on CXProduct-SMI) providing per-IPX-address filtering/forwarding rules on this vendor's modular platform. Its table, keyed by index, records source/destination IPX address, a filter parameter, and row status. As a configuration MIB it lets an administrator confirm which IPX addresses are being filtered or forwarded with specific parameters. It is deployed on this vendor's modular chassis platform carrying legacy IPX traffic. Engineers can download the CXFLT-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXFLT-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Modular chassis platform (legacy IPX filtering)

Monitoring Examples

An administrator checks cxFltIpxAddrTable to confirm a specific IPX address is correctly filtered before troubleshooting unexpected IPX traffic on this platform.

What Can Be Monitored

per-IPX-address filtering/forwarding rules

Imported Objects

From CXProduct-SMI

cxFltIpx

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
cxFltIpxAddrTable	1.3.6.1.4.1.495.2.1.6.22.1		not-accessible	Provides the filtering/forwarding information for each IPX address. Each entry (row) in the table corresponds to a specific IPX address. Some of the values in a row may be modified. If additional IPX addresses are required they may be added.
cxFltIpxAddrEntry	1.3.6.1.4.1.495.2.1.6.22.1.1		not-accessible	Provides the filtering/forwarding information for a specific IPX address.
INT cxFltIpxIndex	1.3.6.1.4.1.495.2.1.6.22.1.1.1	INTEGER	read-write	Identifies the number used to index entries on the IPX filtering/forwarding table. The number provides access to all filtering/forwarding information for a source IPX address, its associated destination address, and filtering/forwarding parameter. Range of Values: 1-32 Default Value: None Configuration Changed: administrative
NET cxFltIpxSrcAddr	1.3.6.1.4.1.495.2.1.6.22.1.1.2	NetNumber	read-write	Determines the source IPX address (network number) used for filtering/forwarding. This address corresponds to a destination address in cxFltIpxDstAddr of this table. The object cxFltIpxParameter determines whether data is filtered or forwarded from the source address to the destination address. This number must be entered as 8 hexadecimal characters (four octets), for example 0xAB12CD34. The 0x must be present in every number; it indicates that the number is a hex number and is not counted as one of the octets. The x must be lowercase; the other characters are not case sensitive. Default Value: None Range of Values: 4 octets, each character ranging from 00 to FF Configuration Changed: administrative
NET cxFltIpxDstAddr	1.3.6.1.4.1.495.2.1.6.22.1.1.3	NetNumber	read-write	Determines the destination IPX address (network number). This address corresponds to a source address in cxFltIpxSrcAddr on this table. The object cxFltIpxParameter determines whether data is filtered or forwarded from the source address to this destination address. The address is an IPX network number. This number must be entered as 8 hexadecimal characters (four octets), for example 0xAB12CD34. The 0x must be present in every number; it indicates that the number is a hex number and is not counted as one of the octets. The x must be lowercase; the other characters are not case sensitive. Range of Values: 4 octets, each character ranging from 00 to FF Default Value: None Configuration Changed: administrative
INT cxFltIpxParameter	1.3.6.1.4.1.495.2.1.6.22.1.1.4	INTEGER	read-write	Determines the filtering/forwarding action and the priority processing for data sent from a source IPX address (cxFltIpxSrcAddr) to a destination IPX address (cxFltIpxDstAddr). Options: discard (1) forward (2) priority-low (3) priority-high (4) Default Value: discard (1) Configuration Changed: administrative
INT cxFltIpxRowStatus	1.3.6.1.4.1.495.2.1.6.22.1.1.5	INTEGER	read-write	Determines the status of the objects in a table row. Options: invalid (1): row is flagged, after the next reset, values are disabled and the row is deleted from the table. valid (2): values are enabled Default Value: valid (2) Configuration Changed: administrative

RFC description

Manages filtering and forwarding rules for IPX addresses on routers.

Start monitoring CX/Memotec modular chassis platform (IPX filtering) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXFLT-IPX-MIB

What Is CXFLT-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description