F3-PWE3-MIB

All MIBs › F3-PWE3-MIB

Organization: ADVA Optical Networking

Last Updated: 2012-04-03

Category: Domain: Telco/Transport, Pseudowire, VPN and Security, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Pseudowire Edge-to-Edge Emulation (PWE3) service configuration and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-PWE3-MIB?

This ADVA F3 platform MIB covers Pseudowire Edge-to-Edge Emulation (PWE3) service configuration on FSP150CM/CC devices, used to carry Ethernet or TDM traffic transparently over a packet-switched network via emulated circuits. It exposes profile-based configuration for idle-pattern insertion, jitter-buffer resynchronization (increase/decrease factors and resync threshold), and loopback testing on pseudowire circuits. Its monitoring relevance is centered on pseudowire service health and diagnostics — the resync profile thresholds reveal how aggressively the device corrects for clock/jitter drift on the emulated circuit, and the loopback profile enables in-service fault isolation on a specific pseudowire. As with the other F3 MIBs, it builds on IETF PWE3 concepts (RFC 3985-style pseudowire emulation) without directly importing an IETF PWE3 MIB, layering ADVA-specific profile tables instead. It is deployed on ADVA FSP150CM/CC network elements used to deliver circuit emulation services, such as carrying legacy TDM traffic over an Ethernet/IP core. Engineers can download the F3-PWE3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-PWE3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet/pseudowire device

Monitoring Examples

An operator would configure f3Pwe3ResyncProfileTable/Entry with f3Pwe3ResyncProfileIncreaseFactor, DecreaseFactor, and ResyncThreshold to tune how the pseudowire jitter buffer recovers from clock drift, then monitor for frequent resync events as an indicator of an unstable underlying packet path. f3Pwe3IdlePatternProfileByte defines the idle fill pattern sent when there's no payload, and f3Pwe3LoopbackProfileTable/Entry lets the operator initiate a loopback test on a specific pseudowire to isolate whether a fault lies in the emulated circuit or the far-end equipment.

What Can Be Monitored

pseudowire resync threshold/increase-decrease factors
idle pattern configuration
loopback test profile/state
pseudowire performance notifications

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
CmPmBinAction
CmPmIntervalType
IpPriorityMapMode
IpVersion
OperationalState
PerfCounter64
SecondaryState
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetAccPortIndex	OBJECT-TYPE
cmEthernetNetPortIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

How to Use in IPNetwork Monitor

Example using f3Pwe3SatopThresholdMonValue OID:

Select an ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Pseudowire Edge-to-Edge Emulation) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type f3Pwe3SatopThresholdMonValue into the Find box to locate it in the OID tree, then select it and click OK. It reports the monitored value corresponding to f3Pwe3SatopThresholdVariable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 f3Pwe3AisStabilizationProfileEnterTime	1.3.6.1.4.1.2544.1.12.19.1.5.1.2	Unsigned32	read-write	This object allows SNMP management entities to specify the time (in hundreds of milliseconds) that will be applied on a LOS event, before the SAToP instance transmits all 1s pattern downstream (AIS). Range 0 to 3 seconds in 100 millisecond increments.
f3Pwe3AisStabilizationProfileEntry	1.3.6.1.4.1.2544.1.12.19.1.5.1		not-accessible	An entry containing information applicable to a particular PWE3 AisStabilization Profile Entity. These profiles are used by PWE3 SAToP entities.
U32 f3Pwe3AisStabilizationProfileExitTime	1.3.6.1.4.1.2544.1.12.19.1.5.1.3	Unsigned32	read-write	This object allows SNMP management entities to specify the holdon time that will be applied when leaving the AIS Stabilization period. Range 0 to 3 seconds in 100 milliseconds increments (e.g. parameter range is 0 to 30).
I32 f3Pwe3AisStabilizationProfileIndex	1.3.6.1.4.1.2544.1.12.19.1.5.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 AIS Stabilization Profile.
f3Pwe3AisStabilizationProfileTable	1.3.6.1.4.1.2544.1.12.19.1.5		not-accessible	A list of entries corresponding to the PWE3 AisStabilization Profile entities.
f3Pwe3Compliance	1.3.6.1.4.1.2544.1.12.19.4.1.1			Describes the requirements for conformance to the F3 PWE3 group.
f3Pwe3Compliances	1.3.6.1.4.1.2544.1.12.19.4.1
f3Pwe3ConfigObjects	1.3.6.1.4.1.2544.1.12.19.1
f3Pwe3Conformance	1.3.6.1.4.1.2544.1.12.19.4
f3Pwe3Groups	1.3.6.1.4.1.2544.1.12.19.4.2
U32 f3Pwe3IdlePatternProfileByte	1.3.6.1.4.1.2544.1.12.19.1.1.1.2	Unsigned32	read-write	This object allows SNMP management entities to specify the Idle Pattern Profile information.
f3Pwe3IdlePatternProfileEntry	1.3.6.1.4.1.2544.1.12.19.1.1.1		not-accessible	An entry containing information applicable to a particular PWE3 Idle Pattern Profile Entity. These profiles are used by PWE3 SAToP entities.
I32 f3Pwe3IdlePatternProfileIndex	1.3.6.1.4.1.2544.1.12.19.1.1.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 Idle Pattern Profile.
f3Pwe3IdlePatternProfileTable	1.3.6.1.4.1.2544.1.12.19.1.1		not-accessible	A list of entries corresponding to the PWE3 Idle Pattern Profile entities.
U32 f3Pwe3LoopbackProfileClearLength	1.3.6.1.4.1.2544.1.12.19.1.3.1.5	Unsigned32	read-write	This object allows SNMP management entities to specify the Loopback PWE3 Clear Length.
U32 f3Pwe3LoopbackProfileClearPattern	1.3.6.1.4.1.2544.1.12.19.1.3.1.6	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Loopback Clear Pattern.
f3Pwe3LoopbackProfileEntry	1.3.6.1.4.1.2544.1.12.19.1.3.1		not-accessible	An entry containing information applicable to a particular PWE3 Loopback Profile Entity. These profiles are used by PWE3 T1/E1 interfaces.
I32 f3Pwe3LoopbackProfileIndex	1.3.6.1.4.1.2544.1.12.19.1.3.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 Loopback Profile.
U32 f3Pwe3LoopbackProfileLength	1.3.6.1.4.1.2544.1.12.19.1.3.1.2	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Loopback Length.
U32 f3Pwe3LoopbackProfilePattern	1.3.6.1.4.1.2544.1.12.19.1.3.1.3	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Loopback Pattern.
U32 f3Pwe3LoopbackProfileRepeatTime	1.3.6.1.4.1.2544.1.12.19.1.3.1.4	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Loopback Profile Repeat Time (Duration).
f3Pwe3LoopbackProfileTable	1.3.6.1.4.1.2544.1.12.19.1.3		not-accessible	A list of entries corresponding to the PWE3 Loopback Profile entities.
f3Pwe3LossProfileEntry	1.3.6.1.4.1.2544.1.12.19.1.4.1		not-accessible	An entry containing information applicable to a particular PWE3 Loss Profile Entity. These profiles are used by PWE3 SAToP entities.
I32 f3Pwe3LossProfileIndex	1.3.6.1.4.1.2544.1.12.19.1.4.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 Loss Profile.
U32 f3Pwe3LossProfileLossStateEnterTime	1.3.6.1.4.1.2544.1.12.19.1.4.1.2	Unsigned32	read-write	This object allows SNMP management entities to specify the holdoff time that will be applied prior to the SAToP instance entering a Loss State.
U32 f3Pwe3LossProfileLossStateExitTime	1.3.6.1.4.1.2544.1.12.19.1.4.1.3	Unsigned32	read-write	This object allows SNMP management entities to specify the holdon time that will be applied when the conditon causing the loss state clears.
f3Pwe3LossProfileTable	1.3.6.1.4.1.2544.1.12.19.1.4		not-accessible	A list of entries corresponding to the PWE3 Loss Profile entities.
f3Pwe3MIB	1.3.6.1.4.1.2544.1.12.19			This module provides the F3 Pseudo Wire definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3Pwe3ObjectGroup	1.3.6.1.4.1.2544.1.12.19.4.2.1			A collection of objects used to manage the F3 PWE3 Configuration data.
f3Pwe3PerfNotifGroup	1.3.6.1.4.1.2544.1.12.19.4.2.3			A collection of notifications related to F3 PWE3 Threshold Crossing Alerts.
f3Pwe3PerfObjectGroup	1.3.6.1.4.1.2544.1.12.19.4.2.2			A collection of objects used to manage the F3 PWE3 Performance data.
f3Pwe3PerformanceNotifications	1.3.6.1.4.1.2544.1.12.19.3
f3Pwe3PerformanceObjects	1.3.6.1.4.1.2544.1.12.19.2
U32 f3Pwe3ResyncProfileDecreaseFactor	1.3.6.1.4.1.2544.1.12.19.1.2.1.3	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Resync Profile Decrease Factor. This is used to define the leak rate for the leaky bucket algorithm associated with the Resync mechanism.
f3Pwe3ResyncProfileEntry	1.3.6.1.4.1.2544.1.12.19.1.2.1		not-accessible	An entry containing information applicable to a particular PWE3 Resync Profile Entity. These profiles are used by PWE3 SAToP entities.
U32 f3Pwe3ResyncProfileIncreaseFactor	1.3.6.1.4.1.2544.1.12.19.1.2.1.2	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Resync Profile Increase Factor. This is used to define the fill rate of the leaky bucket algorithm associated with the Resync mechanism.
I32 f3Pwe3ResyncProfileIndex	1.3.6.1.4.1.2544.1.12.19.1.2.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 Resync Profile.
U32 f3Pwe3ResyncProfileResyncThreshold	1.3.6.1.4.1.2544.1.12.19.1.2.1.4	Unsigned32	read-write	This object allows SNMP management entities to specify the PWE3 Resync Profile Resync Threshold. This is the threshold value at which point the pseudo-wire connection is deemed out of synchronization state.
f3Pwe3ResyncProfileTable	1.3.6.1.4.1.2544.1.12.19.1.2		not-accessible	A list of entries corresponding to the PWE3 Resync Profile entities.
ADM f3Pwe3SatopAdminState	1.3.6.1.4.1.2544.1.12.19.1.6.1.3	AdminState	read-write	This object represents the Administrative State of the PWE3 SAToP entity.
NUM f3Pwe3SatopAisStabilizationProfile	1.3.6.1.4.1.2544.1.12.19.1.6.1.22	VariablePointer	read-create	This object allows specification of the AIS stabilization Profile object. If no profile is associated, this value should be 0.0.
STR f3Pwe3SatopAlias	1.3.6.1.4.1.2544.1.12.19.1.6.1.2	DisplayString	read-create	This object allows SNMP management entities to provide an alias to the PWE3 SAToP entity.
T/F f3Pwe3SatopControlWordEnabled	1.3.6.1.4.1.2544.1.12.19.1.6.1.13	TruthValue	read-create	This object is used for 3rd party interoperability, since earlier versions of PWE do not support control-word.
PWE f3Pwe3SatopDiscoveryType	1.3.6.1.4.1.2544.1.12.19.1.6.1.7	PWE3SatopDiscoveryType	read-create	This object allows ability to statically/dynamically determine the MAC address of the remote IP Address associated with the SAToP. In the case of static discovery type, f3Pwe3SatopRemoteMacAddress must be explicitly specified. In the case of dynamic discovery, the system will use ARP mechanism to obtain the remote Layer 2 MAC address.
PWE f3Pwe3SatopEncapsulationType	1.3.6.1.4.1.2544.1.12.19.1.6.1.10	PWE3SatopEncapsulationType	read-create	This object allows ability to specify the encapsulation type of the SATop. It can be encapsulated with VLAN and single MPLS label(vlan-one-mpls-label), VLAN and two MPLS labels (vlan-two-mpls-label), untagged and two MPLS labels (novlan-two-mpls-label) .
f3Pwe3SatopEntry	1.3.6.1.4.1.2544.1.12.19.1.6.1		not-accessible	An entry containing information applicable to a particular PWE3 SAToP Entity.
CMP f3Pwe3SatopHistoryAction	1.3.6.1.4.1.2544.1.12.19.2.2.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3Pwe3SatopHistoryEBs	1.3.6.1.4.1.2544.1.12.19.2.2.1.7	PerfCounter64	read-only	The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin.
f3Pwe3SatopHistoryEntry	1.3.6.1.4.1.2544.1.12.19.2.2.1		not-accessible	A conceptual row in the f3Pwe3SatopHistoryTable.
NUM f3Pwe3SatopHistoryESs	1.3.6.1.4.1.2544.1.12.19.2.2.1.5	PerfCounter64	read-only	The counter associated with the number of Errored Seconds encountered by the SATop in the current bin.
NUM f3Pwe3SatopHistoryFramesRx	1.3.6.1.4.1.2544.1.12.19.2.2.1.12	PerfCounter64	read-only	The counter associated with the number of Frames Received in the current bin.
NUM f3Pwe3SatopHistoryFramesTx	1.3.6.1.4.1.2544.1.12.19.2.2.1.10	PerfCounter64	read-only	The counter associated with the number of Frames Transmitted in the current bin.
I32 f3Pwe3SatopHistoryIndex	1.3.6.1.4.1.2544.1.12.19.2.2.1.1	Integer32	not-accessible	An index of the SATop current bin.
NUM f3Pwe3SatopHistoryJitterBufferLateFrames	1.3.6.1.4.1.2544.1.12.19.2.2.1.18	PerfCounter64	read-only	The counter associated with the number of Jitter Buffer Overruns in the current bin.
NUM f3Pwe3SatopHistoryLostFrames	1.3.6.1.4.1.2544.1.12.19.2.2.1.15	PerfCounter64	read-only	The counter associated with the number of Lost Frames detected in the current bin.
NUM f3Pwe3SatopHistoryLostFramesStateTrans	1.3.6.1.4.1.2544.1.12.19.2.2.1.16	PerfCounter64	read-only	The counter associated with the number of transitions to Lost Frame State detected in the current bin.
NUM f3Pwe3SatopHistoryMalformedFramesRx	1.3.6.1.4.1.2544.1.12.19.2.2.1.17	PerfCounter64	read-only	The counter associated with the number of Malformed Frames received in the current bin.
U32 f3Pwe3SatopHistoryMaxJitter	1.3.6.1.4.1.2544.1.12.19.2.2.1.9	Unsigned32	read-only	The maximum absolute jitter on SATop in the current bin.
NUM f3Pwe3SatopHistoryOutOfSeqFramesRx	1.3.6.1.4.1.2544.1.12.19.2.2.1.14	PerfCounter64	read-only	The counter associated with the number of Out of Sequence Frames Received in the current bin.
NUM f3Pwe3SatopHistoryPayloadOctetsRx	1.3.6.1.4.1.2544.1.12.19.2.2.1.13	PerfCounter64	read-only	The counter associated with the number of Payload Octets Received in the current bin.
NUM f3Pwe3SatopHistoryPayloadOctetsTx	1.3.6.1.4.1.2544.1.12.19.2.2.1.11	PerfCounter64	read-only	The counter associated with the number of Payload Octets Transmitted in the current bin.
NUM f3Pwe3SatopHistoryResyncs	1.3.6.1.4.1.2544.1.12.19.2.2.1.8	PerfCounter64	read-only	The counter associated with the number of Resync count events encountered by the SATop in the current bin.
NUM f3Pwe3SatopHistorySESs	1.3.6.1.4.1.2544.1.12.19.2.2.1.6	PerfCounter64	read-only	The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin.
f3Pwe3SatopHistoryTable	1.3.6.1.4.1.2544.1.12.19.2.2		not-accessible	The PWE3 SATop History data.
DAT f3Pwe3SatopHistoryTime	1.3.6.1.4.1.2544.1.12.19.2.2.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3Pwe3SatopHistoryValid	1.3.6.1.4.1.2544.1.12.19.2.2.1.3	TruthValue	read-only	Indicates the validity of the bin.
I32 f3Pwe3SatopIndex	1.3.6.1.4.1.2544.1.12.19.1.6.1.1	Integer32	not-accessible	Unique index value associated with the SAToP Entity.
U32 f3Pwe3SatopJitterBufferSize	1.3.6.1.4.1.2544.1.12.19.1.6.1.14	Unsigned32	read-create	This object allows definition of size of the jitter buffer in microseconds for this SATop instance.
NUM f3Pwe3SatopLossProfile	1.3.6.1.4.1.2544.1.12.19.1.6.1.24	VariablePointer	read-create	This object allows specification of the Loss Profile object. If no profile is associated, this value should be 0.0.
OPE f3Pwe3SatopOperationalState	1.3.6.1.4.1.2544.1.12.19.1.6.1.4	OperationalState	read-only	This object represents the Operational State of the PWE3 SAToP entity.
U32 f3Pwe3SatopPayloadSize	1.3.6.1.4.1.2544.1.12.19.1.6.1.15	Unsigned32	read-create	This object allows specification of the SATop payload size.
IP f3Pwe3SatopRemoteIpAddress	1.3.6.1.4.1.2544.1.12.19.1.6.1.8	IpAddress	read-create	This object allows ability to specify the remote IP Address. This is used in the PWE payload.
MAC f3Pwe3SatopRemoteMacAddress	1.3.6.1.4.1.2544.1.12.19.1.6.1.9	MacAddress	read-create	This object allows ability to specify the remote Layer 2 MAC Address. This must be specified in case of f3Pwe3SatopDiscoveryType as static. This is derived dynamically (via ARP) if f3Pwe3SatopDiscoveryType is dynamic, i.e. it does not have to be specified.
NUM f3Pwe3SatopResyncProfile	1.3.6.1.4.1.2544.1.12.19.1.6.1.23	VariablePointer	read-create	This object allows specification of the Resync Profile object. If no profile is associated, this value should be 0.0.
ROW f3Pwe3SatopRowStatus	1.3.6.1.4.1.2544.1.12.19.1.6.1.27	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3Pwe3SatopRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3Pwe3SatopRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3Pwe3SatopRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3Pwe3SatopRTPEnabled	1.3.6.1.4.1.2544.1.12.19.1.6.1.11	TruthValue	read-create	This object enables/disables RTP header for this SATop instance.
PWE f3Pwe3SatopRTPUpdateFrequency	1.3.6.1.4.1.2544.1.12.19.1.6.1.12	PWE3SatopRTPTSUpdateFreqType	read-create	When f3Pwe3SatopRTPEnabled is true, this object allows specification of the RTP clock update frequency.
MPL f3Pwe3SatopRxMplsLabel1	1.3.6.1.4.1.2544.1.12.19.1.6.1.18	MplsLabel	read-create	This object allows specification of the expected receive MPLS Label. Applicable for single MPLS label encapsulation type.
MPL f3Pwe3SatopRxMplsLabel2	1.3.6.1.4.1.2544.1.12.19.1.6.1.19	MplsLabel	read-create	This object allows specification of the expected receive MPLS Label. Applicable for dual MPLS label encapsulation types.
SEC f3Pwe3SatopSecondaryState	1.3.6.1.4.1.2544.1.12.19.1.6.1.5	SecondaryState	read-only	This object represents the Secondary State of the PWE3 SAToP entity.
CMP f3Pwe3SatopStatsAction	1.3.6.1.4.1.2544.1.12.19.2.1.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3Pwe3SatopStatsEBs	1.3.6.1.4.1.2544.1.12.19.2.1.1.7	PerfCounter64	read-only	The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin.
f3Pwe3SatopStatsEntry	1.3.6.1.4.1.2544.1.12.19.2.1.1		not-accessible	A conceptual row in the f3Pwe3SatopStatsTable.
NUM f3Pwe3SatopStatsESs	1.3.6.1.4.1.2544.1.12.19.2.1.1.5	PerfCounter64	read-only	The counter associated with the number of Errored Seconds encountered by the SATop in the current bin.
NUM f3Pwe3SatopStatsFramesRx	1.3.6.1.4.1.2544.1.12.19.2.1.1.12	PerfCounter64	read-only	The counter associated with the number of Frames Received in the current bin.
NUM f3Pwe3SatopStatsFramesTx	1.3.6.1.4.1.2544.1.12.19.2.1.1.10	PerfCounter64	read-only	The counter associated with the number of Frames Transmitted in the current bin.
I32 f3Pwe3SatopStatsIndex	1.3.6.1.4.1.2544.1.12.19.2.1.1.1	Integer32	not-accessible	An index of the SATop current bin.
NUM f3Pwe3SatopStatsIntervalType	1.3.6.1.4.1.2544.1.12.19.2.1.1.2	CmPmIntervalType	read-only	Indicates the type of collection, i.e. whether it is 15 Min, 1 Day.
NUM f3Pwe3SatopStatsJitterBufferLateFrames	1.3.6.1.4.1.2544.1.12.19.2.1.1.18	PerfCounter64	read-only	The counter associated with the number of Jitter Buffer Late Frames in the current bin.
NUM f3Pwe3SatopStatsLostFrames	1.3.6.1.4.1.2544.1.12.19.2.1.1.15	PerfCounter64	read-only	The counter associated with the number of Lost Frames detected in the current bin.
NUM f3Pwe3SatopStatsLostFramesStateTrans	1.3.6.1.4.1.2544.1.12.19.2.1.1.16	PerfCounter64	read-only	The counter associated with the number of transitions to Lost Frame State detected in the current bin.
NUM f3Pwe3SatopStatsMalformedFramesRx	1.3.6.1.4.1.2544.1.12.19.2.1.1.17	PerfCounter64	read-only	The counter associated with the number of Malformed Frames received in the current bin.
U32 f3Pwe3SatopStatsMaxJitter	1.3.6.1.4.1.2544.1.12.19.2.1.1.9	Unsigned32	read-only	The maximum absolute jitter on SATop in the current bin.
NUM f3Pwe3SatopStatsOutOfSeqFramesRx	1.3.6.1.4.1.2544.1.12.19.2.1.1.14	PerfCounter64	read-only	The counter associated with the number of Out of Sequence Frames Received in the current bin.
NUM f3Pwe3SatopStatsPayloadOctetsRx	1.3.6.1.4.1.2544.1.12.19.2.1.1.13	PerfCounter64	read-only	The counter associated with the number of Payload Octets Received in the current bin.
NUM f3Pwe3SatopStatsPayloadOctetsTx	1.3.6.1.4.1.2544.1.12.19.2.1.1.11	PerfCounter64	read-only	The counter associated with the number of Payload Octets Transmitted in the current bin.
NUM f3Pwe3SatopStatsResyncs	1.3.6.1.4.1.2544.1.12.19.2.1.1.8	PerfCounter64	read-only	The counter associated with the number of Resync count events encountered by the SATop in the current bin.
NUM f3Pwe3SatopStatsSESs	1.3.6.1.4.1.2544.1.12.19.2.1.1.6	PerfCounter64	read-only	The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin.
f3Pwe3SatopStatsTable	1.3.6.1.4.1.2544.1.12.19.2.1		not-accessible	The PWE3 SATop Current data.
T/F f3Pwe3SatopStatsValid	1.3.6.1.4.1.2544.1.12.19.2.1.1.3	TruthValue	read-only	Indicates the validity of the bin.
STO f3Pwe3SatopStorageType	1.3.6.1.4.1.2544.1.12.19.1.6.1.26	StorageType	read-create	The type of storage configured for this entry.
f3Pwe3SatopTable	1.3.6.1.4.1.2544.1.12.19.1.6		not-accessible	A list of entries corresponding to the PWE3 SAToP entities.
f3Pwe3SatopTDMEntitiesEntry	1.3.6.1.4.1.2544.1.12.19.1.7.1		not-accessible	An entry containing information applicable to a particular PWE3 SATop TDM entity.
f3Pwe3SatopTDMEntitiesTable	1.3.6.1.4.1.2544.1.12.19.1.7		not-accessible	A list of entries corresponding to the PWE3 SATop TDM entities .
NUM f3Pwe3SatopTDMEntity	1.3.6.1.4.1.2544.1.12.19.1.6.1.6	VariablePointer	read-create	This object allows specification of the T1/E1 entity associated with the SAToP. This is only used at SATop creation time. Result of get operation on this object will result with zeroDotZero since one Satop could have more then one associated TDM entity. Subsequently, the associated TDM entities are managed via f3Pwe3SatopTDMEntityTable.
I32 f3Pwe3SatopTDMEntityIndex	1.3.6.1.4.1.2544.1.12.19.1.7.1.1	Integer32	not-accessible	Unique index value associated with the PWE3 SATOP TDM Entity.
NUM f3Pwe3SatopTDMEntityObject	1.3.6.1.4.1.2544.1.12.19.1.7.1.2	VariablePointer	read-write	This object points to the PWE3 SATOP TDM Entity. This is OID of the actual T1/E1 interface.
ROW f3Pwe3SatopTDMEntityRowStatus	1.3.6.1.4.1.2544.1.12.19.1.7.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3Pwe3SatopTDMEntityRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3Pwe3SatopTDMEntityRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3Pwe3SatopTDMEntityRowStatus object may be modified if the associated instance of this object is equal to active(1).
STO f3Pwe3SatopTDMEntityStorageType	1.3.6.1.4.1.2544.1.12.19.1.7.1.3	StorageType	read-create	The type of storage configured for this entry.
NTF f3Pwe3SatopThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.19.3.1			This trap is sent each time a threshold on a PM condition on an PWE3 SATop is crossed.
f3Pwe3SatopThresholdEntry	1.3.6.1.4.1.2544.1.12.19.2.3.1		not-accessible	A conceptual row in the f3Pwe3SatopThresholdTable.
I32 f3Pwe3SatopThresholdIndex	1.3.6.1.4.1.2544.1.12.19.2.3.1.1	Integer32	not-accessible	An index that uniquely identifies an entry in the f3Pwe3SatopThresholdTable.
NUM f3Pwe3SatopThresholdInterval	1.3.6.1.4.1.2544.1.12.19.2.3.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
C64 f3Pwe3SatopThresholdMonValueEx	1.3.6.1.4.1.2544.1.12.19.2.3.1.6	Counter64	read-only	Monitored value corresponding to f3Pwe3SatopThresholdVariable.
f3Pwe3SatopThresholdTable	1.3.6.1.4.1.2544.1.12.19.2.3		not-accessible	A table of entries that allow manageability of SATop Thresholds.
U32 f3Pwe3SatopThresholdValueHi	1.3.6.1.4.1.2544.1.12.19.2.3.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
U32 f3Pwe3SatopThresholdValueLo	1.3.6.1.4.1.2544.1.12.19.2.3.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
NUM f3Pwe3SatopThresholdVariable	1.3.6.1.4.1.2544.1.12.19.2.3.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
PWE f3Pwe3SatopTransportMode	1.3.6.1.4.1.2544.1.12.19.1.6.1.25	PWE3SatopTransportMode	read-create	This object allows specification of the SATop transport mode.
MPL f3Pwe3SatopTxMplsLabel1	1.3.6.1.4.1.2544.1.12.19.1.6.1.20	MplsLabel	read-create	This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for single MPLS label encapsulation type.
MPL f3Pwe3SatopTxMplsLabel2	1.3.6.1.4.1.2544.1.12.19.1.6.1.21	MplsLabel	read-create	This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for dual MPLS label encapsulation type.
VLA f3Pwe3SatopVlanId	1.3.6.1.4.1.2544.1.12.19.1.6.1.16	VlanId	read-create	This object allows specification of the SATop VLAN Id. Applicable for vlan based encapsulation types.
VLA f3Pwe3SatopVlanPriority	1.3.6.1.4.1.2544.1.12.19.1.6.1.17	VlanPriority	read-create	This object allows specification of the SATop VLAN Priority. Applicable for vlan based encapsulation types.

RFC description

Provides Pseudo Wire Emulation Edge (PWE3) definitions for ADVA F3 optical networking equipment.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Pseudowire Edge-to-Edge Emulation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-PWE3-MIB