HP-ICF-TUNNELED-NODE-MIB

All MIBs › HP-ICF-TUNNELED-NODE-MIB

Organization: HPE

Last Updated: 2016-12-06

Category: Technology: SDN/OpenFlow, VPN and Security, Vendor: HP/HPE

Description: HP ICF SNMP MIB for tunneled node configuration in HP VAN SDN environments, managing OpenFlow-enabled tunnel endpoints on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-TUNNELED-NODE-MIB?

HP-ICF-TUNNELED-NODE-MIB is an HP proprietary SNMP module for managing the Tunneled Node protocol, used in HP VAN SDN (Software-Defined Networking) environments to configure OpenFlow-enabled tunnel endpoints on HP ProCurve switches. It exposes configuration data describing tunneled-node client associations and their tunnel state to an SDN controller, rather than raw hardware sensor data. From a monitoring standpoint, it lets an administrator verify the software/feature status of the tunneled-node client, confirming whether a switch port is successfully tunneled to the controller or has fallen back to local switching. It has an inherent dependency on HP's VAN SDN Controller and OpenFlow protocol concepts for its operational context. It is typically deployed in HP VAN SDN deployments such as BYOD/NAC integration scenarios, where HP-ICF-TUNNELED-NODE-MIB SNMP monitoring confirms edge switches keep tunneling client traffic to a central controller for policy enforcement.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-TUNNELED-NODE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve switch (HP VAN SDN environment)

Monitoring Examples

No sample objects were listed for this module, so specific table names are unavailable, but given its purpose it would be expected to expose a per-client or per-port tunneled-node status table indicating whether a tunnel to the SDN controller is currently established. An administrator would poll this status to confirm ports enrolled in tunneled-node mode remain connected to the controller, since a status reverting to disconnected would mean affected clients lose SDN-based policy enforcement and fall back to local forwarding. This module is best understood as an SDN feature-state monitor rather than a general hardware or performance MIB.

What Can Be Monitored

tunneled node connection status
tunnel endpoint configuration
controller-tunnel state per port

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfTunneledNode	1.3.6.1.4.1.11.2.14.11.5.1.128			This MIB module contains HP proprietary objects for managing the Tunneled Node protocol.
hpicfTunneledNodeObjects	1.3.6.1.4.1.11.2.14.11.5.1.128.1
hpicfTunneledNodeConfig	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1
hpicfTunneledNodeTable	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1		not-accessible	This table contains the configuration information for the Tunneled Node.
hpicfTunneledNodeEntry	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1		not-accessible	An entry in the hpicfTunneledNodeTable that contains the configuration information of a Tunneled Node.
U32 hpicfTunneledNodeIndex	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.1	Unsigned32	not-accessible	The index of a Tunneled Node profile in hpicfTunneledNodeTable. Only one Tunneled Node profile can be created.
T/F hpicfTunneledNodeEnable	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.2	TruthValue	read-create	Provides the status of Tunneled Node protocol.
IPt hpicfTunneledNodePrimaryAddrType	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.3	InetAddressType	read-create	The type of address in hpicfTunneledNodePrimaryAddr.
IP hpicfTunneledNodePrimaryAddr	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.4	InetAddress	read-create	The address of a known Controller.
IPt hpicfTunneledNodeBackupAddrType	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.5	InetAddressType	read-create	The type of address in hpicfTunneledNodeBackupAddr.
IP hpicfTunneledNodeBackupAddr	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.6	InetAddress	read-create	The address of a known Backup Controller.
U32 hpicfTunneledNodeTimeout	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.7	Unsigned32	read-create	The keep alive timeout between a switch and a controller.
ROW hpicfTunneledNodeRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.8	RowStatus	read-create	The status of this conceptual row in hpicfTunneledNodeTable. This object takes values of createAndGo (4), createAndWait (5), active (1) and destroy (6) as part of a SNMP request. A value of createAndGo (4) indicates that all the required columns are configured within this request and the profile will be set to active, if the request succeeds. A value of createAndWait (5) indicates that some of the required columns are not configured within this request and the profile be set to notReady, if the request succeeds. A value of active (1) is used to set the profile to active state from notReady state. A request with active would succeed only if all the required columns are already configured. A value of destroy (6) is used to delete the profile. A conceptual row in this table can be in either of the following states: active (1) and notReady (3). A value of active (1) indicates that all the required columns are appropriately configured and the profile can be applied on ports. A value of notReady (3) indicates that one or more of the required columns are not configured yet and the profile cannot be applied on ports. The following are the required columns: Controller IP (hpicfTunneledNodePrimaryAddr). When the profile is in use on any port, the values of required columns cannot be modified. When the profile is in use on any port, the corresponding conceptual row can not be deleted.
INT hpicfTunneledNodeMode	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.9	INTEGER	read-create	The Tunneled Node Mode can be Per port or per user.
hpicfTunneledNodePortConfigTable	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.2		not-accessible	This table contains the per port configuration information of the Tunneled Node protocol.
hpicfTunneledNodePortConfigEntry	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.2.1		not-accessible	An entry in the hpicfTunneledNodePortConfigTable that contains the configuration information of the tunneled node protocol on a port.
ROW hpicfTunneledNodePortRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.2.1.1	RowStatus	read-create	Status of this conceptual row in hpicfTunneledNodePortConfigTable.
T/F hpicfTunneledNodeFallbackLclSw	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.2.1.2	TruthValue	read-create	Provides the status of Fallback to Local Switching when tunnel establishment with the controller fails.
T/F hpicfTunneledNodeClearStats	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.3	TruthValue	read-write	Clears the Tunneled Node statistics for all the Tunneled Node enabled ports. By default, this object is set to FALSE.
hpicfTunneledNodePapiTable	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4		not-accessible	This table contains the configuration information for the papi security key.
hpicfTunneledNodePapiEntry	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4.1		not-accessible	An entry in the hpicfTunneledNodePapiTable that contains the configuration information of papi security.
INT hpicfTunneledNodePapiAuthMode	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4.1.1	INTEGER	not-accessible	The authentication mode supported by this key.
OCT hpicfTunneledNodePapiKeyValue	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4.1.2	OCTET STRING	read-create	A unique string that serves as the key-value for papi security. A read on this object will always return an empty string.
OCT hpicfTunneledNodePapiKeyEncr	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4.1.3	OCTET STRING	read-create	The encrypted form of a unique string that serves as the key-value in the papi security.This object can be accessed only when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key previously read from a compatible HPE Networking device.
ROW hpicfTunneledNodePapiRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.4.1.4	RowStatus	read-create	The row status for this papi security key instance.
hpicfTunneledNodeConformance	1.3.6.1.4.1.11.2.14.11.5.1.128.2
hpicfTunneledNodeCompliances	1.3.6.1.4.1.11.2.14.11.5.1.128.2.1
hpicfTunneledNodeCompliance	1.3.6.1.4.1.11.2.14.11.5.1.128.2.1.1			The compliance statement for the hpicfTunneledNode mib.
hpicfTunneledNodeCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.128.2.1.2			The compliance statement for the hpicfTunneledNode mib.
hpicfTunneledNodeGroups	1.3.6.1.4.1.11.2.14.11.5.1.128.2.2
hpicfTunneledNodeGroup	1.3.6.1.4.1.11.2.14.11.5.1.128.2.2.1			A collection of objects for the hpicfTunneledNodeTable configurations.
hpicfTunneledNodePortGroup	1.3.6.1.4.1.11.2.14.11.5.1.128.2.2.2			A collection of objects for the hpicfTunneledNodePortConfigTable configurations.
hpicfTunneledNodePapiGroup	1.3.6.1.4.1.11.2.14.11.5.1.128.2.2.3			A collection of objects for the hpicfTunneledNodePapiGroup configuration.
hpicfTunneledNodeGroup1	1.3.6.1.4.1.11.2.14.11.5.1.128.2.2.4			A collection of objects for the hpicfTunneledNodeTable configurations.

RFC description

Manages HP Tunneled Node protocol configuration and monitoring for network devices.

Start monitoring HP ProCurve switch in HP VAN SDN environment (Tunneled Node protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-TUNNELED-NODE-MIB

What Is HP-ICF-TUNNELED-NODE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description