All MIBs › DFL260-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: VPN and Security, Vendor: D-Link
Description: Manages D-Link DFL-260 firewall/UTM appliance configuration, policies, and VPN settings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL260-MIB?
DFL260-MIB is a D-Link vendor MIB for the DFL-260 series NetDefend UTM firewall appliance, covering system performance, connection tracking, per-protocol packet-state counters, and per-interface traffic statistics alongside VPN/policy configuration. It exposes clear hardware/software status data including CPU load, buffer usage, forwarded traffic volume, active connection counts, and TCP/UDP/ICMP state-machine packet counters (SYN, open, FIN, UDP, ICMP, other). This makes it directly useful for monitoring appliance health: dfl260SysCpuLoad flags CPU exhaustion, dfl260SysBuffUse flags memory/buffer pressure, and dfl260SysConns combined with the TCP state counters reveals connection-table exhaustion or a SYN-flood-style attack condition. It is a self-contained enterprise MIB under the dlink/netdefendMgmt/utmFirewall subtree with no notable dependency on other standard MIBs beyond the base SNMP framework. It is deployed on D-Link DFL-260 UTM firewalls, where DFL260-MIB SNMP monitoring protects small-to-medium business network edges by exposing CPU, connection, and traffic health.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL260-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-260 series UTM firewall appliance
Monitoring Examples
An operator would poll dfl260SysCpuLoad and dfl260SysBuffUse on a short interval to catch CPU or buffer saturation, and watch dfl260SysConns alongside dfl260SysPscTcpSyn and dfl260SysPscTcpOpen to see whether half-open TCP sessions are accumulating (a SYN-flood indicator). Walking dfl260IfStatsTable per interface shows which WAN or LAN port is carrying the forwarded bit/packet load reported in dfl260SysForwardedBits and dfl260SysForwardedPackets, helping localize a traffic spike to a specific link.
What Can Be Monitored
- CPU load
- buffer utilization
- active connection count
- forwarded traffic bits/packets
- TCP SYN/open/FIN state counters
- per-interface traffic statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl260SysForwardedBits OID:
Select a D-Link DFL-260 series UTM firewall appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl260SysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| utmFirewall | 1.3.6.1.4.1.171.20.2 | |||
| dfl260 | 1.3.6.1.4.1.171.20.2.1 | |||
| dfl260OS | 1.3.6.1.4.1.171.20.2.1.1 | |||
| dfl260OSStats | 1.3.6.1.4.1.171.20.2.1.1.2 | |||
| dfl260System | 1.3.6.1.4.1.171.20.2.1.1.2.1 | |||
| G32 dfl260SysCpuLoad | 1.3.6.1.4.1.171.20.2.1.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl260SysForwardedBitsEx | 1.3.6.1.4.1.171.20.2.1.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl260SysForwardedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl260SysBuffUse | 1.3.6.1.4.1.171.20.2.1.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl260SysConns | 1.3.6.1.4.1.171.20.2.1.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl260SysPerStateCounters | 1.3.6.1.4.1.171.20.2.1.1.2.1.6 | |||
| G32 dfl260SysPscTcpSyn | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl260SysPscTcpOpen | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl260SysPscTcpFin | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl260SysPscUdp | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl260SysPscIcmp | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl260SysPscOther | 1.3.6.1.4.1.171.20.2.1.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl260IfStatsTable | 1.3.6.1.4.1.171.20.2.1.1.2.1.7 | not-accessible | A table of DFL-260 specific interfaces statistics | |
| dfl260IfStatsEntry | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1 | not-accessible | The row in a table of DFL-260 specific interface statistics | |
| I32 dfl260IfStatsIndex | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl260SysIfStatsTable |
| STR dfl260IfName | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl260IfFragsIn | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl260IfFragReassOk | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl260IfFragReassFail | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl260IfPktsInCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl260IfPktsOutCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl260IfBitsInCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl260IfBitsOutCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl260IfPktsTotCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl260IfBitsTotCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl260IfHCPktsInCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl260IfPktsInCnt. |
| C64 dfl260IfHCPktsOutCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl260IfPktsOutCnt. |
| C64 dfl260IfHCBitsInCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl260IfBitsInCnt. |
| C64 dfl260IfHCBitsOutCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl260IfBitsOutCnt. |
| C64 dfl260IfHCPktsTotCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl260IfPktsTotCnt. |
| C64 dfl260IfHCBitsTotCnt | 1.3.6.1.4.1.171.20.2.1.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl260IfBitsTotCnt. |
| dfl260IfRxRingTable | 1.3.6.1.4.1.171.20.2.1.1.2.1.8 | not-accessible | A table of DFL-260 specific interface Rx ring statistics | |
| dfl260IfRxRingEntry | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1 | not-accessible | The row in a table of DFL-260 specific interface Rx ring statistics. | |
| I32 dfl260IfRxRingIndex | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl260IfRxRingTable. |
| C32 dfl260IfRxRingFifoErrors | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl260IfRxDespools | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl260IfRxAvgUse | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl260IfRxRingSaturation | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl260RxRingFlooded | 1.3.6.1.4.1.171.20.2.1.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl260IfTxRingTable | 1.3.6.1.4.1.171.20.2.1.1.2.1.9 | not-accessible | A table of DFL-260 specific interface Tx ring statistics | |
| dfl260IfTxRingEntry | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1 | not-accessible | The row in a table of DFL-260 specific interface Tx ring statistics. | |
| I32 dfl260IfTxRingIndex | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl260IfRxRingTable. |
| G32 dfl260IfTxDespools | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl260IfTxAvgUse | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl260IfTxRingSaturation | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl260RxTingFlooded | 1.3.6.1.4.1.171.20.2.1.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl260IfVlanStatsTable | 1.3.6.1.4.1.171.20.2.1.1.2.1.10 | not-accessible | A table of DFL-260 VLAN statistics | |
| dfl260IfVlanStatsEntry | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1 | not-accessible | The row in a table of dfl260IfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl260IfVlanIndex | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl260IfVlanStatsTable. |
| C32 dfl260IfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl260IfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl260IfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl260IfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl260IfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl260IfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.2.1.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl260HWSensorTable | 1.3.6.1.4.1.171.20.2.1.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl260HWSensorEntry | 1.3.6.1.4.1.171.20.2.1.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl260HWSensorIndex | 1.3.6.1.4.1.171.20.2.1.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl260HWSensorName | 1.3.6.1.4.1.171.20.2.1.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl260HWSensorValue | 1.3.6.1.4.1.171.20.2.1.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl260HWSensorUnit | 1.3.6.1.4.1.171.20.2.1.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl260SysMemUsage | 1.3.6.1.4.1.171.20.2.1.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl260SysTCPUsage | 1.3.6.1.4.1.171.20.2.1.1.2.1.13 | |||
| G32 dfl260SysTCPRecvSmall | 1.3.6.1.4.1.171.20.2.1.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl260SysTCPRecvLarge | 1.3.6.1.4.1.171.20.2.1.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl260SysTCPSendSmall | 1.3.6.1.4.1.171.20.2.1.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl260SysTCPSendLarge | 1.3.6.1.4.1.171.20.2.1.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl260SysTimerUsage | 1.3.6.1.4.1.171.20.2.1.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl260SysConnOPS | 1.3.6.1.4.1.171.20.2.1.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl260SysConnCPS | 1.3.6.1.4.1.171.20.2.1.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl260SysHCForwardedBits | 1.3.6.1.4.1.171.20.2.1.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl260VPN | 1.3.6.1.4.1.171.20.2.1.1.2.2 | |||
| dfl260IPsec | 1.3.6.1.4.1.171.20.2.1.1.2.2.1 | |||
| dfl260IPsecGlobal | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1 | |||
| G32 dfl260IPsecPhaseOneActive | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl260IPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl260IPsecQuickModeActive | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl260IPsecPhaseOneDone | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl260IPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl260IPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl260IPsecQuickModeDone | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl260IPsecQuickModeFailed | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl260IPsecInfoDone | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl260IPsecInfoFailed | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl260IPsecInOctetsComp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl260IPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl260IPsecOutOctetsComp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl260IPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl260IPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl260IPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl260IPsecInPackets | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl260IPsecOutPackets | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl260IPsecForwardedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl260IPsecActiveTransforms | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl260IPsecTotalTransforms | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl260IPsecOutOfTransforms | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl260IPsecTotalRekeys | 1.3.6.1.4.1.171.20.2.1.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl260Rules | 1.3.6.1.4.1.171.20.2.1.1.2.3 | |||
| dfl260RuleUseTable | 1.3.6.1.4.1.171.20.2.1.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl260RuleUseEntry | 1.3.6.1.4.1.171.20.2.1.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl260RuleIndex | 1.3.6.1.4.1.171.20.2.1.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl260RuleName | 1.3.6.1.4.1.171.20.2.1.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl260RuleUse | 1.3.6.1.4.1.171.20.2.1.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl260IPPools | 1.3.6.1.4.1.171.20.2.1.1.2.4 | |||
| I32 dfl260IPPoolsNumber | 1.3.6.1.4.1.171.20.2.1.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl260IPPoolTable | 1.3.6.1.4.1.171.20.2.1.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl260IPPoolEntry | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl260IPPoolIndex | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl260IPPoolName | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl260IPPoolPrepare | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl260IPPoolFree | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl260IPPoolMisses | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl260IPPoolClientFails | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl260IPPoolUsed | 1.3.6.1.4.1.171.20.2.1.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl260DHCPServer | 1.3.6.1.4.1.171.20.2.1.1.2.5 | |||
| G32 dfl260DHCPTotalRejected | 1.3.6.1.4.1.171.20.2.1.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl260DHCPRuleTable | 1.3.6.1.4.1.171.20.2.1.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl260DHCPRuleEntry | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl260DHCPRuleIndex | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl260DHCPRuleName | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl260DHCPRuleUsage | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl260DHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl260DHCPActiveClients | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl260DHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl260DHCPRejectedRequests | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl260DHCPTotalLeases | 1.3.6.1.4.1.171.20.2.1.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl260UserAuth | 1.3.6.1.4.1.171.20.2.1.1.2.6 | |||
| G32 dfl260UserAuthHTTPUsers | 1.3.6.1.4.1.171.20.2.1.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl260UserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.2.1.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl260UserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.2.1.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl260UserAuthPPPUsers | 1.3.6.1.4.1.171.20.2.1.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl260UserAuthEAPUsers | 1.3.6.1.4.1.171.20.2.1.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl260UserAuthRuleUseTable | 1.3.6.1.4.1.171.20.2.1.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl260UserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.2.1.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl260UserAuthRuleIndex | 1.3.6.1.4.1.171.20.2.1.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl260UserAuthRuleName | 1.3.6.1.4.1.171.20.2.1.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl260UserAuthRuleUse | 1.3.6.1.4.1.171.20.2.1.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl260LinkMonitor | 1.3.6.1.4.1.171.20.2.1.1.2.7 | |||
| I32 dfl260LinkMonGrp | 1.3.6.1.4.1.171.20.2.1.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl260LinkMonGrpTable | 1.3.6.1.4.1.171.20.2.1.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl260LinkMonGrpEntry | 1.3.6.1.4.1.171.20.2.1.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl260LinkMonGrpIndex | 1.3.6.1.4.1.171.20.2.1.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl260LinkMonGrpName | 1.3.6.1.4.1.171.20.2.1.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl260LinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.2.1.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl260LinkMonHostTable | 1.3.6.1.4.1.171.20.2.1.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl260LinkMonHostEntry | 1.3.6.1.4.1.171.20.2.1.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl260LinkMonHostIndex | 1.3.6.1.4.1.171.20.2.1.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl260LinkMonHostId | 1.3.6.1.4.1.171.20.2.1.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl260LinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.2.1.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl260LinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.2.1.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl260Pipes | 1.3.6.1.4.1.171.20.2.1.1.2.8 | |||
| G32 dfl260PipeUsers | 1.3.6.1.4.1.171.20.2.1.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl260PipeTable | 1.3.6.1.4.1.171.20.2.1.1.2.8.2 | not-accessible | Table of pipes | |
| dfl260PipeEntry | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl260PipeIndex | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl260PipeName | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl260PipeMinPrec | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl260PipeMaxPrec | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl260PipeDefPrec | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl260PipeNumPrec | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl260PipeNumUsers | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl260PipeCurrentBps | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl260PipeCurrentPps | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl260PipeDelayedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl260PipeDropedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl260PipePrecTable | 1.3.6.1.4.1.171.20.2.1.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl260PipePrecEntry | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl260PipePrecIndex | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl260PipePrecEntry. |
| I32 dfl260PipePrec | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl260PipePrecBps | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl260PipePrecTotalPps | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl260PipePrecReservedBps | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl260PipePrecDynLimBps | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl260PipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl260PipePrecDelayedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl260PipePrecDropedPackets | 1.3.6.1.4.1.171.20.2.1.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl260ALG | 1.3.6.1.4.1.171.20.2.1.1.2.9 | |||
| G32 dfl260AlgSessions | 1.3.6.1.4.1.171.20.2.1.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl260AlgConnections | 1.3.6.1.4.1.171.20.2.1.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl260AlgTCPStreams | 1.3.6.1.4.1.171.20.2.1.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl260HttpAlg | 1.3.6.1.4.1.171.20.2.1.1.2.9.4 | |||
| dfl260HttpAlgTable | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl260HttpAlgEntry | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl260HttpAlgIndex | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl260HttpAlgName | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl260HttpAlgTotalRequested | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl260HttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl260HttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl260HttpAlgCntFltTable | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl260HttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl260HttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl260HttpAlgCntFltName | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl260HttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl260HttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl260HttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.2.1.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl260SmtpAlg | 1.3.6.1.4.1.171.20.2.1.1.2.9.5 | |||
| dfl260SmtpAlgTable | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl260SmtpAlgEntry | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl260SmtpAlgIndex | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl260SmtpAlgName | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl260SmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl260SmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl260SmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl260SmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl260SmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl260SmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl260SmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl260SmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl260SmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl260SmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.2.1.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl260DHCPRelay | 1.3.6.1.4.1.171.20.2.1.1.2.11 | |||
| G32 dfl260DHCPRelayCurClients | 1.3.6.1.4.1.171.20.2.1.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl260DHCPRelayCurTrans | 1.3.6.1.4.1.171.20.2.1.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl260DHCPRelayRejected | 1.3.6.1.4.1.171.20.2.1.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl260DHCPRelayRuleTable | 1.3.6.1.4.1.171.20.2.1.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl260DHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl260DHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl260DHCPRelayRuleName | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl260DHCPRelayRuleHits | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl260DHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl260DHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl260DHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.2.1.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl260HA | 1.3.6.1.4.1.171.20.2.1.1.2.12 | |||
| G32 dfl260HASyncSendQueueLength | 1.3.6.1.4.1.171.20.2.1.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl260HASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.2.1.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl260HASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.2.1.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl260HASyncSentPackets | 1.3.6.1.4.1.171.20.2.1.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl260HASyncSendResentPackets | 1.3.6.1.4.1.171.20.2.1.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl260reg | 1.3.6.1.4.1.171.20.2.1.2 | |||
| dfl260MibModules | 1.3.6.1.4.1.171.20.2.1.2.1 | |||
| dfl260_MIB | 1.3.6.1.4.1.171.20.2.1.2.1.2 | The MIB module for D-Link DFL-260 series product. | ||
| dfl260MibConfs | 1.3.6.1.4.1.171.20.2.1.2.2 | |||
| dfl260StatsConformance | 1.3.6.1.4.1.171.20.2.1.2.2.1 | |||
| dfl260StatsCompliance | 1.3.6.1.4.1.171.20.2.1.2.2.1.1 | Module Compliance | ||
| dfl260MibObjectGroups | 1.3.6.1.4.1.171.20.2.1.2.3 | |||
| dfl260StatsRegGroups | 1.3.6.1.4.1.171.20.2.1.2.3.1 | |||
| dfl260SystemObjectGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.1 | System statistics Group | ||
| dfl260IPsecObjectGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.2 | IPsec Group | ||
| dfl260StateCountersGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.3 | Per state counters | ||
| dfl260IPPoolGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.4 | IP pool entry objects group | ||
| dfl260DHCPServerGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.5 | DHCP server rules objects. | ||
| dfl260RuleUseGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.6 | Rule use objects. | ||
| dfl260UserAuthGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.7 | User auth objects. | ||
| dfl260IfStatsGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.8 | DFL-260 interface statistics group. | ||
| dfl260LinkMonitorGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.9 | DFL-260 link monitor statistics group | ||
| dfl260PipesObjectGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.10 | DFL-260 pipes statistics group | ||
| dfl260DHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.12 | DFL-260 DHCP relay statistics group | ||
| dfl260AlgGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.13 | DFL-260 HTTP ALG statistics group | ||
| dfl260HAGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.14 | DFL-260 HA statistics group | ||
| dfl260IfVlanGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.15 | DFL-260 VLAN statistics group | ||
| dfl260SmtpAlgGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl260SysTCPGroup | 1.3.6.1.4.1.171.20.2.1.2.3.1.17 | DFL-260 TCP buffer usage group |
RFC description
Vendor-private MIB for D-Link DFL-260 series UTM firewalls managing system statistics, counters, and performance metrics.
Start monitoring D-Link DFL-260 series UTM firewall appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.